Loading...
/*
 * Nunchuck functions  -- Talk to a Wii Nunchuck
 *
 * This library is from the Bionic Arduino course : 
 *                          http://todbot.com/blog/bionicarduino/
 *
 * 2007 Tod E. Kurt, http://todbot.com/blog/
 *
 * The Wii Nunchuck reading code originally from Windmeadow Labs
 *   http://www.windmeadow.com/node/42
 */

#include <WProgram.h>

static uint8_t nunchuck_buf[6];   // array to store nunchuck data,

// Uses port C (analog in) pins as power & ground for Nunchuck
static void nunchuck_setpowerpins()
{
#define pwrpin PORTC3
#define gndpin PORTC2
    DDRC |= _BV(pwrpin) | _BV(gndpin);
    PORTC &=~ _BV(gndpin);
    PORTC |=  _BV(pwrpin);
    delay(100);  // wait for things to stabilize        
}

// initialize the I2C system, join the I2C bus,
// and tell the nunchuck we're talking to it
static void nunchuck_init()
{ 
    Wire.begin();                // join i2c bus as master
    Wire.beginTransmission(0x52);// transmit to device 0x52
    Wire.send(0x40);// sends memory address
    Wire.send(0x00);// sends sent a zero.  
    Wire.endTransmission();// stop transmitting
}

// Send a request for data to the nunchuck
// was "send_zero()"
static void nunchuck_send_request()
{
    Wire.beginTransmission(0x52);// transmit to device 0x52
    Wire.send(0x00);// sends one byte
    Wire.endTransmission();// stop transmitting
}

// Encode data to format that most wiimote drivers except
// only needed if you use one of the regular wiimote drivers
static char nunchuk_decode_byte (char x)
{
    x = (x ^ 0x17) + 0x17;
    return x;
}

// Receive data back from the nunchuck, 
// returns 1 on successful read. returns 0 on failure
static int nunchuck_get_data()
{
    int cnt=0;
    Wire.requestFrom (0x52, 6);// request data from nunchuck
    while (Wire.available ()) {
        // receive byte as an integer
        nunchuck_buf[cnt] = nunchuk_decode_byte(Wire.receive());
        cnt++;
    }
    nunchuck_send_request();  // send request for next data payload
    // If we recieved the 6 bytes, then go print them
    if (cnt >= 5) {
        return 1;   // success
    }
    return 0; //failure
}

// Print the input data we have recieved
// accel data is 10 bits long
// so we read 8 bits, then we have to add
// on the last 2 bits.  That is why I
// multiply them by 2 * 2
static void nunchuck_print_data()
{ 
    static int i=0;
    int joy_x_axis = nunchuck_buf[0];
    int joy_y_axis = nunchuck_buf[1];
    int accel_x_axis = nunchuck_buf[2]; // * 2 * 2; 
    int accel_y_axis = nunchuck_buf[3]; // * 2 * 2;
    int accel_z_axis = nunchuck_buf[4]; // * 2 * 2;

    int z_button = 0;
    int c_button = 0;

    // byte nunchuck_buf[5] contains bits for z and c buttons
    // it also contains the least significant bits for the accelerometer data
    // so we have to check each bit of byte outbuf[5]
    if ((nunchuck_buf[5] >> 0) & 1) 
        z_button = 1;
    if ((nunchuck_buf[5] >> 1) & 1)
        c_button = 1;

    if ((nunchuck_buf[5] >> 2) & 1) 
        accel_x_axis += 2;
    if ((nunchuck_buf[5] >> 3) & 1)
        accel_x_axis += 1;

    if ((nunchuck_buf[5] >> 4) & 1)
        accel_y_axis += 2;
    if ((nunchuck_buf[5] >> 5) & 1)
        accel_y_axis += 1;

    if ((nunchuck_buf[5] >> 6) & 1)
        accel_z_axis += 2;
    if ((nunchuck_buf[5] >> 7) & 1)
        accel_z_axis += 1;

    Serial.print(i,DEC);
    Serial.print("\t");

    Serial.print("joy:");
    Serial.print(joy_x_axis,DEC);
    Serial.print(",");
    Serial.print(joy_y_axis, DEC);
    Serial.print("  \t");

    Serial.print("acc:");
    Serial.print(accel_x_axis, DEC);
    Serial.print(",");
    Serial.print(accel_y_axis, DEC);
    Serial.print(",");
    Serial.print(accel_z_axis, DEC);
    Serial.print("\t");

    Serial.print("but:");
    Serial.print(z_button, DEC);
    Serial.print(",");
    Serial.print(c_button, DEC);

    Serial.print("\r\n");  // newline
    i++;
}

// returns zbutton state: 1=pressed, 0=notpressed
static int nunchuck_zbutton()
{
    return ((nunchuck_buf[5] >> 0) & 1) ? 0 : 1;  // voodoo
}

// returns zbutton state: 1=pressed, 0=notpressed
static int nunchuck_cbutton()
{
    return ((nunchuck_buf[5] >> 1) & 1) ? 0 : 1;  // voodoo
}

// returns value of x-axis joystick
static int nunchuck_joyx()
{
    return nunchuck_buf[0]; 
}

// returns value of y-axis joystick
static int nunchuck_joyy()
{
    return nunchuck_buf[1];
}

// returns value of x-axis accelerometer
static int nunchuck_accelx()
{
    return nunchuck_buf[2];   // FIXME: this leaves out 2-bits of the data
}

// returns value of y-axis accelerometer
static int nunchuck_accely()
{
    return nunchuck_buf[3];   // FIXME: this leaves out 2-bits of the data
}

// returns value of z-axis accelerometer
static int nunchuck_accelz()
{
    return nunchuck_buf[4];   // FIXME: this leaves out 2-bits of the data
}