Nicolai-ARGON-CX Tech-Sheet-2017 - ready


1	ARGON CX - 2017
2		Rahmengrößen	frame sizes	small	medium	large	x-large	xx-large
3	A	Oberrohrlänge	top tube length	540 mm	560 mm	580 mm	600 mm	auf Anfrage/ on enquiry
4	B	Sitzrohrlänge	seat tube length	525 mm	540 mm	590 mm	620 mm		Rahmenpreis inkl. Pulverbeschichtung / schwarz Eloxal	1.399,00€
5	C	Steuerrohrlänge	head tube length	130 mm	150 mm	170 mm	190 mm		Gewicht	2,10kg
6	D	Radstand	wheel base	1018 mm	1039 mm	1071 mm	1092 mm		X-Country	☆☆☆☆☆
7	M	Sitzrohrüberstand	Seattube offset	50 mm	50 mm	50 mm	50 mm		Trail	☆☆☆☆☆
8	O	Schrittfreiheit	standover	765 mm	780 mm	822 mm	849 mm		All Mountain	☆☆☆☆☆
9	Q	Reach	reach	372 mm	387 mm	412 mm	427 mm		Enduro	☆☆☆☆☆
10	R	Stack	stack	547 mm	566 mm	585 mm	603 mm		Gravity	☆☆☆☆☆
11
12		Geometrie Details	geometry details	size S - M	size L - XL
13	E	Lenkwinkel	head angle	70,5°
14	F	Sitzrohrwinkel	seat angle	73,0°	74,0°
15	G	Tretlagerhöhe zu Achse	bottom bracket drop	-65 mm
16	K	Gabel-Referenzmaß	fork reffering measurement	395 mm
17	Hr	Hinterbaulänge (fix AFE)	chain stay length (fix AFE)	430 mm
18	Hr	Hinterbaulänge (slide AFE)	chain stay length (slide AFE)	430-454 mm
19	I	Sattelstützendurchmesser	seatpost diameter	31,6 mm
20	L	Federgabelvorstand	fork offset	47 mm
21	N	Reifendurchmesser	tire diameter	705 mm
22	HS	Steuersatzhöhe	headset stack	3 mm
23
24		Schnittstellen Maße	device measurements
25		empfohlener Gabelfederweg	matching fork travel		0 - 30mm
26		maximale Gabeleinbaulänge	maximum fork length		405 mm
27		freigegeben für max. Gabel-Standrohr Ø	approved for max. fork upper tube Ø	32 mm
28		Hinterrad Nabenbreite	rear axle width	135x10mm or 142x12mm
29		Bremsenstandard 135x10mm slide	brake standard 135x10mm slide	IS2000 160mm
30		Bremsenstandard 142x12mm slide	brake standard 142x12mm slide	PM180
31		Bremsenstandard 142x12mm fix	brake standard 142x12mm fix	PM160
32		maximale Bremsscheibengröße hi.	maximum rear-disc diameter	185 mm
33		max. empfohlene Reifenbreite	max. recommended tire width	35 mm
34		BSA Tretlagerbreite	BSA bottom bracket width	68 mm
35		Reverb Stealth ready	Reverb Stealth ready	optional
36		Flaschenhaltermontage	bottle cage mount	✔
37		Steuerohr Standard	headtube standard		ZS 44/56
38		Steuersatz min. Einpresstiefe unten	ahead set min. insert depth	11 mm
39		Benötigter Steuersatz für tapered Gabelschaft	needed headset for tapered forks	ZS44/28.6 \| ZS56/40
40
41	Aktualisierungen, Änderungen und Tippfehler vorbehalten/ Updates, changes and typing errors reserved


1	GENERAL INSTRUCTIONS
2
3	1	If you order a frame of the ION family without a shock the adjustmentbolt of the excentric key (ET-KEY) is not completely tightened. This ensures an easy assembly of the rear shock. Please tighten the bolt to the specified torque before your first ride
4
5		Nr	Part	Torque
6		1	ET-KEY	7 Nm
7		2	Vorspanndeckel (Umlenkhebel & Schwingenlagerung) / Pre-Load cap (shock lever & swingarm pivot)	5 Nm
8		3	Dämpferschrauben / shock bolts	17,5 Nm
9		4	Schrauben Umwerfer / bolts front mech	7 Nm
10		5	Steckachse / Thru axle	10 Nm
11		tab.1: NICOLAI torque chart
12


1	TECH-INFO GATES
2
3	The table shows some possible GATES singlespeed combinations, there are far more combinations possible. Please check the CARBONDRIVE APP (Android or IPhone) for more information. Please keep in mind that the belt has to be tentioned, therefore the minimum chainstaylength for belts has to be 5mm longer than the chainstaylength described in the geometry Tech-Sheet. For the ARGON CX does that mean 435mm.
4
5	Frontsprocket	Rearsprocket	Belt	chainstaylength [mm]	ratio
6	46 T	24 T	115 T	438,3	1,92
7	46 T	22 T	115 T	443,5	2,09
8
9


1	PARTLIST
2	under construction


1	ARGON CX - FAQ
2
3	1
4