1 | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
2 | System Model | High stress temperature cycle test system | System Model | Cyclic corrosion test system | System Model | Cold and thermal shock test system | |||||
3 | Model | SMS-21 | Model | CYP-200DZ | CYP-90Z | CYP-160DZ | Model | TSA-203-ES | |||
4 | image | image | image | ||||||||
5 | Temperature Range(℃) | -70 to +180 | Quantity of Salt Spray | 1.5±0.5ml/h/80cm2 | High temperature range(℃) | -60 to +200 | |||||
6 | |||||||||||
7 | Humid Range(%RH) | 20 to 98 | Temperature of Salt Spray(℃) | +35/+50 | Low temperature range(℃) | -70 to 0 | |||||
8 | |||||||||||
9 | Temperature Change Speed | No specimen: 5°C/min | Spray Pressure(Mpa) | 0.098 ±0.0025 | Recovery time | Within 10 minutes
*Depends on heat load | |||||
10 | (-45⇔+155℃) | Drying(%) | 25 (60℃) | ||||||||
11 | Load Capacity of Test Area(kg) | 50 | |||||||||
12 | Cable Hole(mm) | φ 50/10 (1 place on each side) | Wet(%) | 60 to 95(+50℃) | |||||||
13 | Internal Dimensions W×D×H(mm) | 1200 × 1500 × 1000 | Cable Hole(mm) | φ100 (1 place) | φ50 / 100 (1 place on each side) | Φ100 (1 place) | |||||
14 | Internal Capacity(L) | 1800 | Internal Dimensions W×D×H(mm) | 2000 × 1000 × 1000 | 900 × 500 × 600 | 1600 × 1000 × 1000 | |||||
15 | Load Capacity of Test Area(kg) | 200 | Load Capacity of Test Area(kg) | 200 | 50 | 200 | |||||
16 | Number of Systems | 2 | Number of Systems | 2 | 1 | 1 | |||||
17 | |||||||||||
18 | System Model | Head Expander | Cubic fixture | System Model | Semi-anechoic chamber room | ||||||
19 | Model | TBV-950S-A55S-M | TBV-750S-A30-M | TBV-550S-A55S-M | TBV-1450-K125-A | TCJ-B300-A55S-M | TCJ-B200-A55S-M | ||||
20 | image | image | |||||||||
21 | Maximum Frequency(Hz) | 1000 | 1000 | 2000 | 200 | 600 | 2000 | Use for | Various noise level measurement -Squeak & Rattle Test (Noise Test) -Sound power level measurement of small electronic devices | ||
22 | Mass(kg) | 120 | 50 | 48 | 410 | 14 | 7 | Internal Dimensions W×D×H | 3000 × 3000 × 2600 | ||
23 | Indoor background noise | NC20 or less | |||||||||
24 | Size(mm) | 950×950 | 750×750 | 550×550 | 1450x1450 | 300×300×300 | 200×200×200 | Inverse square law | Up to 10 kHz (ISO3745 compliant) | ||
25 | Sound absorbing wedge | 600 × 600 × 600 | |||||||||
26 |