| Brand | Model | Type | Bluetooth Name | Instructions | Clear pairings |
| | | | | | |
|---|
| 1Mii | B06 | Receiver | | On the receiver, press and hold the play button for 3 seconds in power on mode to put the receiver in pairing mode. | |
| 808 Audio | CANZ XL | Speaker | 808 Canz XL | Press and hold the Pair button on the speaker until the speaker beeps. The Pair light should start flashing. | |
| Aftershokz | Trekz Titanium | Headphones | Trekz Titanium | Turn your headphones off. Enter pairing mode by pressing and holding the volume+ button. Your headphones will turn on and Audrey will say, "Welcome to Trekz Titanium." Continue holding the volume+ button down. Audrey will say, "Pairing" and the LED light will flash red and blue, indicating that the headphones are in pairing mode. | Turn your headphones off. Enter pairing mode by pressing and holding the power/volume+ button for 5-7 seconds. Your headphones will turn on, and then the LED light will flash red and blue.Press and hold the multifunction button, power/volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds. You'll hear 2 beeps and/or feel vibrations. Turn your headphones off. |
| AirMod | Bluetooth adapter for Bose QC15, QC25 | Adapter | | On the adapter, press and hold the Power button and wait for the LED light to flash BLUE. When it does, your adapter is in pairing mode. | |
| AKG | N60NC | Headphones | | Move the power switch to the Bluetooth icon. The LED should begin fast blinking. | |
| Alpatronix | HX100 | Headphones | Alpatronix HX110 | Make sure the HX110 is turned OFF. If your headphone is ON (LED light blinking), turn it off by pressing and holding the Multifunction Button for 3-4 seconds. Place the HX110 in pairing mode by pressing and holding the Multifunction Button for 8 seconds. After 3-4 seconds, the headphone will turn on and the LED will flash blue. It is important to continue to hold down the button until the LED flashes blue and red rapidly. At this time, the headphone is in pairing mode. | |
| Altec Lansing | IM210 | Speaker | | When you are turning ON the speaker for the first time it automatically tries to connect to the last paired device, if it cannot find the last paired device and you have paired multiple devices it will try to establish connection with the previously paired devices. If none of the paired devices are available to connect it will turn to a discoverable mode and this can take anywhere from 5 to 90 seconds. If you are trying to establish a connection during this time you will receive an error. Kindly wait for approximately 90 seconds, then scan for Bluetooth devices again. | |
| Altec Lansing | Mini LifeJacket 2 | Speaker | MiniLifeJacket2 | Press and hold the Power button on your speaker for about 5 seconds. Your speaker will enter pairing mode. | |
| Altec Lansing | Mini LifeJacket 3 | Speaker | | Press and hold the + and - (plus and minus) buttons on the speaker at same time until you hear a beep. The Mini LifeJacket 3 will enter pairing mode. | |
| Amazon | Amazon Basics Bluetooth Audio Receiver BTR1 | Audio receiver | Amazon_Audio | Press Pair on your receiver. The LED quickly blinks blue. | |
| Amazon | BT1 | Speaker | Amazon_BT1 | Press and hold the Function button (the center of the five buttons) for 1 to 3 seconds. A tone sounds, the LED blinks quickly, and your speaker enters pairing mode. | |
| Amazon | Echo | Speaker | Echo-XXX | 1. Register the Echo to your Amazon account, or make sure it is still registered if you have already registered it. 2. In the Alexa app, tap the menu icon, select Settings, then select your Echo under Devices | |
| Anker | SoundCore | Speaker | Anker Soundcore | On the speaker, press the Bluetooth symbol on the top of the speaker to enter pairing mode. There will be a rapidly flashing blue light. | |
| Anker | SoundCore Mini | Speaker | Anker SoundCore Mini | Press the mode button for three seconds to enter pairing mode. The blue LED will rapidly flash blue. | |
| Anker | SoundCore Sport XL | Speaker | | The speaker will automatically enter pairing mode if no devices have previously been paired. To pair a new device, first disable Bluetooth on the connected device or press the Bluetooth button to re-enter pairing mode. A steady flashing blue light will indicate pairing mode. A solid blue light means the speaker has connected to a previous device. | |
| Apekx | BE1002 | Earphones | | Press and hold the power button on the earphones until the LED flashes blue and red. | |
| Apple | AirPods | Earphones | | Put your Airpods in the case. Open the lid. Press and hold the setup button on the back of the case until you see the status light flash white. | |
| AR | ARS120 | Speaker | ARS120 | Turn on your speaker, then press and hold down the Pair button for 3 seconds. A blue light will begin flashing rapidly indicating the speaker is in pairing mode. | |
| Art+Sound | AR500 (possibly others) | Headphones | | On your headphones, press and hold the play/pause/power button for approximately six seconds until a voice prompt saying "Power on. Pairing" is heard. | |
| Aukey | SK-S1 | Speaker | | Turn off the speaker, then turn it on again. It will enter pairing mode if no previously paired devices are operating nearby. | |
| AUSDOM | AH2S | Headphones | | Press the Power button on the headphones for 5 seconds. | |
| Auvio | 4000437 | Speaker | AUVIO4000437 | Disconnect the power from your speaker for about 20 seconds, then plug it back in again. You can just remove the round power wire from the back. Switch ON your speaker. The Bluetooth/AUX IN indicator red and blue indicating that the speaker is in pairing mode. | |
| Avantree | Audition (BTHS-AS9) | Headphones | Avantree Audition | Turn Audition off (press and hold MFB button for 4s). Press and hold MFB button for 7-10s until LED indicator flashes blue and red alternately. | |
| Bass Egg | Verb | Speaker | | Turn switch to Bluetooth symbol. | |
| Beats | Beats X | Earphones | | Press and hold the power button on your earphones for 5 seconds to put them in pairing mode. | |
| Beats | PILL+ | Speaker | BEATS PILL+ | Press and hold the "b" button for at least 3 seconds. The Bluetooth LED on the back of the Pill will blink WHITE rapidly indicating device is in pairing mode. | |
| Beats | Powerbeats2 | Earphones | | Press and hold the power/connect button (located on the left earpiece) for 4 seconds to enter pairing mode. The LED next to the button will blink white while in paring mode, and turn solid white when successfully paired. | |
| Beats | Powerbeats3 | Earphones | | Press the power button for 5 seconds. When the indicator light flashes, your earphones are discoverable. | |
| Beats | Solo3 | Headphones | | Press the power button for 5 seconds. When the Fuel Gauge flashes, your headphones are discoverable. | Hold the power button and volume down button for 10 seconds. When the Fuel Gauge flashes, release the buttons. Pairing mode will be available until the Fuel Gauge stops flashing. |
| BEM | HL2022C | Speaker | Mobile Speaker | Power on the speaker and it will automatically go into pairing mode. A tone should sound and the Bluetooth light will come on. | |
| BEM | HL2750 | Speaker | | Turn the speaker on. The Bluetooth indicator should light and tone should sound confirming that the unit is currently in Bluetooth pairing mode. | |
| Beoplay | A2 | Speaker | | | |
| Blackweb | Bolt | Speaker | | On the speaker, press and hold the power button. The Bluetooth PAIR indicator light will start blinking rapidly. | |
| BlueAnt | BlueAnt Pump Zone over-ear | Headphones | BlueAnt Pump Zone | Make sure the headphones are powered off. Press and hold the multifunctional button for 5 seconds. | |
| Bluedio | F2 | Headphones | Bluedio F | With the headset turned off, press and hold the MF button until you hear "ready to pair," and a blue light stays on.
| |
| Bluedio | T3 | Headphones | T3 | Press and hold the multi-function button for 5 seconds. The surrounding LED will light up blue. | |
| BOAS | LC-8600 | Heaphones | | With the headphones turned off, press the Pause/Play button on the headphones for at least six seconds to enter pairing mode. The Blue and Red LEDs will flash alternatively and there will be a double beep tone. | |
| BOHM | B-66 | Headphones | BOHM B-66 | To begin, make sure your headphones are powered off. Keep the headphones and the device within 3 feet of each other when pairing. Put the headphones into pairing mode by pushing the Bluetooth (big multifunction) button for up to 10 seconds until the LED light begins flashing red and blue. | |
| Bose | Color II SoundLink | Speaker | | On your SoundLink speaker, press and briefly hold the Bluetooth button until the Bluetooth light starts flashing blue slowly. In Windows 8 and 10, two icons for the speaker may show up in the Bluetooth Devices list on the computer. Click the one that shows headphones, then select Pair. Contact us at support@plugable.com for Windows 7. | Press and hold for 10 seconds, until you hear "Bluetooth device list cleared. Ready to pair." |
| Bose | QuietComfort 35 | Headphones | | On the headphones, slide and hold the power switch to the Bluetooth symbol until you hear "Ready to Pair" or the Bluetooth indicator blinks blue. In Windows 8 and 10, two icons for the headphones may show up in the Manage Bluetooth Devices list on the computer. Click the one that shows headphones, then select Pair. Contact us at support@plugable.com for Windows 7. | On the Bose QuietComfort 35, slide the power button to the Bluetooth icon, and hold it there for 10 seconds, until you hear "Bluetooth device list cleared." The Bluetooth indicator should blink blue. If not, slide the power button to the Bluetooth icon again until you hear "Ready to Pair" and the indicator blinks blue. |
| Bose | QuietControl 30 | Earphones | Bose QuietControl | With the earphones powered on, press and hold the Power/Bluetooth button until you hear "Ready to pair" or you see the Bluetooth indicator blinking blue. If you see two entries for your earphones, be sure to click on the one that has a headphones icon. Don't click the one with a picture of a computer monitor and a phone. Contact us at support@plugable.com for Windows 7. | |
| Bose | SoundLink | | | With the Soundlink turned on, press and the "Bluetooth" button. The Bluetooth indicator will blink Blue indicating device is in pairing mode. | |
| Bose | SoundLink AE II | Headphones | | On the headphones, slide and hold the power switch to the Bluetooth symbol until you hear "Ready to Pair" or the Bluetooth indicator blinks blue. In Windows 8 and 10, two icons for the headphones may show up in the Manage Bluetooth Devices list on the computer. Click the one that shows headphones, then select Pair. Contact us at support@plugable.com for Windows 7. | Slide the power switch all the way up to the Bluetooth symbol and hold for ten seconds, until you hear "Bluetooth device list cleared." |
| Bose | SoundLink III | Speaker | | Press the Bluetooth button on the speaker, so the Bluetooth status indicator blinks blue | To clear the speaker memory of all devices, press and hold Bluetooth (about 10 seconds) until you hear a tone. All devices are cleared and the speaker becomes discoverable. |
| Bose | SoundLink Mini | Speaker | | With your Bose SoundLink Mini speaker turned on, press and hold the Bluetooth button on the speaker for 10 seconds until you hear a tone. The Bluetooth indicator on the Bose SoundLink Mini speaker blinks blue to show that the speaker is discoverable. | |
| Bose | SoundLink Mini II | Speaker | Bose Mini II SoundLink | On the speaker, press and hold the Bluetooth button until the Bluetooth indicator blinks blue and you hear, “Ready to pair another device.” | Press and hold the POWER button for ten seconds. The speaker will turn off. Turn it back on again, then press and hold the Bluetooth button until the Bluetooth indicator blinks blue and you hear, “Ready to pair another device” |
| Bose | Soundlink OE | Headphones | Bose OE SoundLink | Slide the power button all the way up to the Bluetooth symbol and hold until you hear, "Ready to pair new device" or you see the Bluetooth indicator blinking blue. | Slide the Power button all the way up to the Bluetooth symbol and hold for 10 seconds, until you hear "Bluetooth device list cleared." |
| Bose | SoundSport | Earbuds | | With your headphones powered on, press and hold the Power/Bluetooth button until you hear 'Ready to pair' or the Bluetooth indicator blinks blue | Press and hold the Power/Bluetooth button for 10 seconds, until you hear "Bluetooth device list cleared." |
| Bose | SoundTouch | Speaker | Bose ST 10 | On your speaker or remote, press and hold down the Bluetooth/AUX button for 2 seconds. Make sure the Bluetooth indicator is blinking blue before you pair your device. | |
| Bose | SoundTouch 20 | Speaker | | On the speaker's button pad or remote, press the Bluetooth/AUX button for two seconds until "Ready to Connect" appears in the display. | |
| Boulder | 7199-85 | Speaker | | Start with the speaker off. Turn on the speaker by sliding the OFF/ON button to ON. A Blue LED will flash 3 times slowly, then will flash quickly to indicate Bluetooth pairing mode. | |
| Boytone | BT210FD | Speaker | BT SPEAKER | Turn the speaker ON using the master power switch on its side. Then press the red "ON" button on the remote. Next scroll through the sources available using the SOURCE button on the remote until you get to "bL". The speaker will emit two beeps and go into pairing mode. | |
| Brookstone | Big Blue Live2 | Speaker | | With your speaker turned off, press and hold the Power Button until the Power/Pairing LED turns on and the power on tone sounds. Next, press and hold the Power Button until the Power/Pairing LED starts flashing to put the speaker in pairing mode | |
| Bush | Bluetooth Adapter | Receiver | B102 | | |
| CANZ | SP808 | Speaker | | On your speaker, press and hold the Pair button until the speaker beeps. The Pair light on the front of the speaker should blink rapidly. | |
| Cellet | EBBOOM944 | Headset | | Press the Multi-function button (labeled with a telephone handset symbol) until the indicator light flashes blue and red. | |
| Corwin | E7 | Headphones | E7 | Activate pairing mode on headphone by moving the switch to "BT." The LED will flash blue.
| |
| Creative | Sound Blaster Jam | Headphones | | Hold the Multifunction button until the LED Indicator flashes green, then release the button. Hold the Multifunction button again until the LED Indicator flashes blue. | |
| Creative | T12 | Speaker | Creative T12 Wireless. | Power on the speaker by turning the knob in the clockwise direction. The LED status indicator will show green. This indicates that when powered up, the speaker is not connected to any devices. Press and Hold the Connect button for 3 seconds, then release when the LED status indicator is flashing in blue. | |
| Creative | T15 | Speaker | | Press and Hold the Bluetooth Connect button for 3 seconds, then release when 2 beep tones are heard with the LED Status Indicator blinking rapidly. | |
| Creative | WP-450 | Headphones | Creative WP-450 Headset | Press and hold the Multifunction button on the right earcup for at least 5 seconds until the indicator light flashes blue. | |
| Denon | AVR-S710W | Receiver | Denon AVR-S710W | On the stereo remote control, select Bluetooth as the Input source. Press Option then use the up/down buttons to select Pairing Mode. | |
| Denon | AVR-X4300H | Receiver | | Press and hold Bluetooth on the amp's remote control unit for at least 3 seconds. The amp will go into the pairing mode. | |
| Denon | RCD-M41 | Receiver | | Press and hold Bluetooth for 3 seconds or longer. The device will go into the pairing mode | |
| DeWalt | DWST08810 | Speakers | | A. Press the audio source button [SRC] until the Bluetooth symbol is displayed or press the Bluetooth button [has a Bluetooth symbol on it]. This operation enters the Bluetooth mode. The Bluetooth button will blink slowly. B. Press the Bluetooth button for 3 seconds to make the music box discoverable. A discoverable signal will sound and the Bluetooth button will blink fast. | |
| Dylan | 991 | Earphones | | Turn on the headset. It should prompt with "pairing" after 5 seconds, and the LED will flash red and blue alternatively. | |
| Energy | BTS 2.1 | Soundbar | EnergyBTS | Press and hold the Source button on the BTS 2.1 control panel for 3 seconds. The status light should flash blue quickly. | |
| Escape | SP-3923 | speaker | | After making sure Bluetooth is turned off on any nearby devices other that the one you want to connect to, turn the speaker on. It will automatically go into Bluetooth pairing mode. | |
| ETEKCITY | T3 RoverBeats | Speaker | T3 | Turn the speaker on. The indicator light on the speaker will be flashing green and blue indicating pairing mode. The speaker will automatically connect with the last paired device if turned off and back on, provided it is within range. To connect to a new device, turn off Bluetooth on the previous device. | |
| F-HeeBin | UVOKS Bluetooth V4.1 | Earphones | | Press the power button on the headset for at least five seconds. The LED should flash red and blue, indicating the headset is in pairing mode. | |
| FRiEQ | BTA03 | Headset | BTA03 | Press and hold the power button on the headset for about 5 seconds. The indicator light will flash red and blue intermittently, showing the device is in pairing mode. | |
| Generic | 18WMS014 | Speaker | 18WMS014 | Start with the speaker Off. Power on the speaker and ensure that the blue indicator light flashes quickly, indicating it is in pairing mode. | |
| Grace Digital | GDI-BTAR512N | Receiver | Grace Digital | Press Bluetooth button once to select Bluetooth as your audio source. Press and hold approximately 2 seconds to enter into Bluetooth pairing mode. The BT light will start flashing when ready to pair with your Bluetooth device and solid blue when the pairing is ready and music can be played | |
| GoGroove | BassPulse | Speakers | | Press the MODE button on the front of the speaker to enter Bluetooth pairing mode. Pairing mode will be indicated by a blue blinking LED indicator light. | |
| Harman Kardon | ONYX STUDIO 3 | Speaker | ONYX STUDIO 3 | Press and hold the Bluetooth button for at least 2.5 seconds. | |
| Harman Kardon | Traveler | Speaker | | Press the Bluetooth button on the speaker. A blue Bluetooth LED should come on in the speaker grill. | |
| Hesh | Hesh 2 | Headphones | HeshBT | Power ON the Hesh BT and while in "device search mode" hold the Volume (+) and the Volume (-) buttons simultaneously for up to 5 seconds until you hear a long double tone. This action will clear all paired devices that were previously paired to the HeshBT, and it will then enter directly into pairing mode. | |
| House of Marley | Chant mini model EM-JA007 | Speaker | | Press the power button on the speaker for three seconds to enter pairing mode. | |
| Hussar | Magicbuds II | Earbuds | | Make sure the earbuds are off. Press and hold the Multi-function button for approximately 2 seconds, then release. The LED indicator should flash blue quickly. This means the earbuds are in pairing mode. | |
| iHome | iBN16 | Speaker | iHome iBN16 | Move the switch on the back of the speaker to the center position so it is under the Bluetooth logo. The speaker will attempt to connect to previously paired devices for 10 seconds, and the LED on the back will flash blue. If a previously paired device is found, it will pair and the LED will become solid blue. If a previously paired device is not found, the speaker goes into a standard pairing mode and the LED will flash blue and red. If prompted to enter a pairing password enter 1234. The LED becomes solid blue if it pairs successfully. The speaker exits pairing mode after 2 minutes if no device connects. | |
| iLIVE | IHB23B | Speaker | | Power on the speaker by pressing the Power button. The Pairing Indicator will flash blue quickly. When pairing, remain within 3 feet of the Bluetooth adapter. This speaker will retain the pairing as long as it is retained in the currently paired device, so be sure to turn off Bluetooth in that device before pairing your speaker with the Plugable Bluetooth adapter. | |
| Insignia | NS-CAHBT02 | Headphones | Insignia NS-CAHBT02 | With the headphones turned off, press and hold PLAY/PAUSE for four seconds.The LED blinks blue and red alternately. Pairing mode is activated. | |
| Insignia | NS-CSPBTHOL | Speaker | NS-CSPBTHOL | On your speaker, press the Source button. Your speaker enters pairing mode, and the LED blinks. Note: Press and hold the Source button to return to pairing mode | To disconnect from the paired Bluetooth device, press and hold the Source button on your speaker for three seconds. Your speaker disconnects from the Bluetooth device and enters pairing mode again. |
| Ion | Explorer BT | Speaker | Explorer BT | Power on the Explorer Bluetooth. Press the Disconnect button to remove any previous connections and reset the Bluetooth module. The speaker should go into pairing mode. | |
| Ion | Plunge | Speaker | | Power on Plunge and it will automatically go into pairing mode to search for Bluetooth devices. You will know you are in pairing mode when the Bluetooth icon is slowly flashing. | |
| Jabra | Halo Free | Headset | | Start with the headset off. Press and hold the multi-function button on the headset until the LED flashes blue. Wear the headset and follow the audio instructions. | Start with the headset turned on. Simultaneously press and hold the volume up and multi-function button for five seconds. Then turn off your headset. Turn on again to enter pairing mode. |
| Jabra | Solemate | Speaker | | On the Solemate, hold the On/off switch in the Up position for 3 seconds. Pairing mode will be announced and the Bluetooth light will flash. | |
| Jam | Double Down | Speaker | JAM DOUBLE DOWN | On your speaker, press and hold the + and - (Plus and Minus) buttons for five seconds to activate pairing mode. The Bluetooth light should blink indicating the speaker is ready to pair. | |
| Jam | Jam 2 | Speaker | Jam Classic | To disable pairing of existing device and pair a new device press and hold the + and - (Plus and Minus) button for 5 seconds to activate pairing mode.
| |
| Jam | Jam+ | Speaker | JAM PLUS | On your speaker, press and hold down the power button for 5 seconds. The Bluetooth indicator will begin to quickly flash in blue. | |
| Jam | Transit HX-HP420 | Headphones | | Start with the headphones Off. Press and press and hold the Play/Pause button for three seconds or until the LED blinks blue. | |
| Jam | Transit HX-HP420A | Headphones | | On your headphones, press and hold the +/– (Plus/Minus) button for 5 seconds to activate pairing mode. A blue light should blink fast. | |
| Jarv | NMotion | Earbuds | | Ensure that the headset is turned off (very important). Press the Pairing button (multi-function button) for approximately 8-9 seconds until the red and blue light flash alternately which indicates that you are in Pairing Mode. (Note: A blue light will turn on at first but keep pressing down the pairing button until it changes to a flashing blue/ red light which indicates that you are in pairing mode). | |
| Jawbone | Jambox | Speaker | | Hold the on/off switch on the Jambox in the upmost position for approximately 3 - 5 seconds, until the LED light begins flashing red and white and the JAMBOX announces that it's entered pairing mode. Release the switch to the middle/on position. The JAMBOX will remain in pairing mode. | |
| Jawbone | Big Jambox | Speaker | | On the speaker, hold the pairing button until the LED flashes red and white. | |
| Jaybird | Run | Earbuds | | Turn off the right bud by pressing the multi-function button for 3 seconds. Enter pairing mode by pressing the multi-function button for 6 seconds. The LED should flash green to indicate pairing mode. | |
| Jaybird | X2 | Earphones | X2 | With headphones turned off and within 1 meter (3 feet) of the music device, press and hold the center key for at least 4 seconds until the status indicator flashes red and green and a voice prompt says "Searching for your music device." | |
| JBL | Charge 2 | Speaker | | On the speaker, press and hold the "Volume +" and "Play/Pause" buttons at the same time for 2-3 seconds until the speaker switches itself off. Then power on and press the Bluetooth button to enter pairing mode. | |
| JBL | Charge 3 | Speaker | JBL Charge 3 | On your speaker, press the Bluetooth button. | |
| JBL | E55BT | Headphones | JBL E55BT | Press the Bluetooth button for 5 seconds. | |
| JBL | Endurance Sprint | Earphones | | Double-tap the JBL logo then hold for 5 seconds to bring the earphone into pairing mode. The LED will flash. | |
| JBL | Everest Elite 750NC | Headphones | | Make sure headphones are turned on, and press and hold the Bluetooth button located at the bottom of the right ear cup until there is a flashing blue light.
| |
| JBL | Flip 2 | Speaker | | Turn on the speaker. Press the Bluetooth button to enter pairing mode. The LED will blink. | |
| JBL | Flip 3 | Speaker | FLIP3 | Hold down the Bluetooth button for at least 3 seconds, until the light flashes blue. You are now in pairing mode. When the devices connect, you will hear a tone from the FLIP3 indicating it is successful. | For complete Bluetooth reset, while the Flip3 is ON and paired, press and hold the Bluetooth button for more than 3 seconds. The Bluetooth button light goes out, and the connection is broken. Press the Bluetooth button again for new pairing. |
| JBL | Flip 4 | Speaker | FLIP4 | Turn the FLIP 4 on by pressing the power button. To put it in pairing mode, hold down the Bluetooth button for at least 3 seconds, until the light flashes blue. You are now in pairing mode. You will hear a tone from the FLIP indicating when pairing is successful. | In power ON mode press and hold the "Volume +" and "Play" buttons at the same time for more than 3 seconds -> Unit will power Off by itself. Now the unit is reset to factory default. |
| JBL | Pulse 2 | Speaker | | On your speaker, press and hold down the Bluetooth button until blue lights go up and down the speaker. | |
| Jiebleum | BL99 | Headphones | BL99 | Press and hold the Multifunction Button(MFB) for 5 seconds until the Bluetooth indicator light flashing red and blue alternately. | |
| JLab | Neon On-Ear Headphones | Headphones | JLab Neon BT | With the headphones powered off, press and hold the Power Button for 10 seconds, until a fast blinking read and blue light indicates the headphones are in pairing mode. | |
| Kinivo | BTH 240 | Headphones | Kinivo BTH240 | Ensure the headphones are powered off, then enter the pairing mode on the headphones by pressing and holding the multifunction button for 7 to 10 seconds until the blue and red lights start flashing alternatively (Note - do not release when you see only the blue light) | |
| Koss | BT540i | Headphones | BT540i | Start with the headphones OFF. Move the power switch to the center position to turn the headphones ON. The LED will flash blue. Next, move the switch all the way to the left and hold for four seconds to enter pairing mode. The LED will flash blue and red. | |
| LG | HBS-700 (Tone) | Headphones | | With the Power off, press the CALL button and move the power switch to the ‘ON’ position at the same time for 4 seconds. When the headset enters Pairing Mode, the LED indicator will show a solid blue light. | |
| LG | HBS-750 | Headset | HBS-750 | With the power off, press the CALL button and slide the power switch to the 'ON’ position at the same time for 2 seconds. When the headset enters Pairing Mode, the LED indicator will show a solid blue light. | |
| LG | HBS-760 | Headset | | With the power off on your headset, press the CALL button and slide the Power switch to the ON position at the same time for 2 seconds. When the headset enters Pairing Mode, the LED indicator will show a solid blue light. | |
| LG | HBS-780 | Headphones | HBS-780 | Press and hold the Call button and slide the Power switch to the ON position to turn it on. The blue Indicator lamp turns on, and the HBS-780 enters pairing mode. | |
| LG | HBS-800 | Headset | LG HBS800 | With the power off, press the CALL button and slide the power switch to the ‘ON’ position. Hold the CALL button for about 2 seconds. When the headset enters Pairing Mode, the LED indicator will show a solid blue light. | |
| LG | HBS-810 | Headset | LG HBS810 | With the power off, press the CALL button and slide the power switch to the ‘ON’ position. Hold the CALL button for about 2 seconds. When the headset enters Pairing Mode, the LED indicator will show a solid blue light. | |
| LG | HBS-900 | Headset | LG HBS900 | With the power off, press the CALL button and slide the Power switch to the ON position at the same time for 2 seconds. When the headset enters Pairing Mode, the LED indicator will show a solid blue light. | |
| LG | LAB550H | Sound Plate | | Use the FUNCTION button to select the Bluetooth® function. “BT READY” will appear in the display window. | |
| LG | LAS350B | Soundbar | LG LAS350B(XX) | On your LG soundbar, select the Bluetooth function by using the Bluetooth button on the remote control or F on the unit until the function is selected. "BT" and then "BT READY" will appear in the display window. | |
| LG | SH4 | Soundbar | LG SH4 (XX) | Select the input source to BT (Bluetooth) by pressing F button on the remote or soundbar repeatedly. The BT (Bluetooth) LED will flash. | |
| Lingyi | V9 | Speaker | V9 | Press and hold the power button for 3 seconds to turn on the Bluetooth speaker, it will sound a voice prompt has been successfully booted. Open the in your device's Bluetooth settings, select V9. A successful connection will sound a tone. | |
| Logitech | Bluetooth Audio Adapter | Bluetooth receiver | | Press the Bluetooth pairing button on Logitech Bluetooth Audio Adapter. It will initiate pairing and the LED will start blinking | |
| Logitech | H800 | Headset | | Slide the Device Selection switch on the right ear cup to the Bluetooth (middle) position. | |
| Logitech | Z600 | Speaker | Logitech Z600 | Press the Bluetooth button. The status light blinks rapidly to indicate the speakers are ready for pairing | |
| Marley | Get Together | Speaker | | Turn the speaker on. You can pair a new device to Get Together by holding the Bluetooth button for 3 seconds. Then press and hold the PAUSE/PLAY button for at least 5 seconds to activate pairing mode. The LED will blink blue indicating device is in pairing mode. | |
| Marshall | Stanmore | Speaker | | Ensure that the Stanmore Bluetooth is powered on. Push the pair button. The red bluetooth indicator starts to flash rapidly. | |
| Master and Dynamic | MW60 | Headphones | MW60 | Hold the sliding switch in the Bluetooth position for 2 seconds. The light will pulse when headphone is in pairing mode. | |
| Merkury Innovations | MI-BTH22 | Headphones | | On your headphones, press and hold the center button for 7 secs until the blue light blinks | |
| Miccus | SR-71 | Headphones | Miccus SR-71 | With the SR-71 Stealth powered off and fully charged, press and hold the MFB (multi-function button) for roughly 3 seconds until the SR-71 Stealth powers on and the LED indicator flashes red and blue alternately, then release the MFB. | With the headphones powered off, press and hold the MFB button (3) 10 seconds until a beep sounds twice to indicate the headphones are reset and the pairing memory is wiped clean. |
| Mpow | 059 | Headphones | | Starting with the headphones turned off, press the center Multifunction button (with the phone symbol) until you hear that it is in pairing mode, and the LED flash red and blue. | |
| Mpow | H1 | Headphones | Mpow H1 | Long press the Power button on the headphones for four seconds until the LED light flashes red and blue alternatively. | |
| Mpow | H7 | Headphones | Mpow H7 | On the headphones, press and hold the power button for 4 seconds until you hear "Power on, pairing." | |
| Mpow | Jaws | Headset | Mpow Jaws | Turn Off the headset. Toggle the power On/Off button to On until the red and green indicator lights start flashing alternatively. You will also hear a voice prompt. | |
| Mpow | Pro Truck Driver | Headset | Mpow | With the headset power off, long press the Power On button for about 3 seconds until the LED flash red and blue alternatively. | |
| Mpow | Thor | Headset | | With your headphones completely turned off, press the power button for five seconds. The LED should flash, indicating the headphones are in pairing mode. | |
| OontZ | Angle 3 | Speaker | | On your speaker, press and hold down the Bluetooth button for 3 seconds. The blue light will begin flashing and the OontZ Angle 3 is ready to pair and connect. | |
| Otium | IPX4 | Earbuds | | Press the "power on" button for 5 seconds until blue and red LEDs flash alternatively and a voice prompt says "pairing." Don't stop pressing when only the blue light comes on. Wait until both red and blue light up. | |
| Ovleng | MX666 | Headphones | | While the headphones are off, hold the power button for 5 seconds. The LED on the side will alternatively flash red and blue. A voice will say the device is ready to pair. After pairing completes, the voice will say the device has been paired successfully. | |
| Panasonic | RP-HTX80B | Headphones | | In the power-off state, press and hold the Power/Bluetooth button of this unit for 3 to 5 seconds until the LED blinks. | |
| Parasom | A1 Magnetic | Earphones | | Press and hold the middle button and you will hear a "Power On" message. Continue holding until you hear "Pairing." | |
| Phiaton | BT 100 NC | Headphones | BT 100 NC | Turn On the headphones. Press and hold the PLAY Button for over 2.5 seconds to enter Pairing mode. The LED will blink blue and red alternatively, and a voice will say Pairing Mode activated. | |
| Philips | SHB5250 Freshtones | Earphones | | Make sure that the headphones are fully charged and turned off. Press and hold the on/off button until the blue and white LED flashes alternately. | |
| Philips | SHB5500BK/27 | Headphones | | Press and hold the Call/Music button (with telephone and play/pause symbols) until the blue and white LED flashes alternately, indicating the headphones are in pairing mode. | |
| Philips | SHB8750NC | Headphones | Philips SHB8750NC | Press and hold the ON/OFF button to turn the headphones on. Press and hold the Bluetooth button until the blue and white LED flashes alternatively. | |
| Pioneer | SE-MJ553BT | Headphones | SE-MJ553BT | Enter pairing mode on the headphones. To do this, turn off power to the headphones, then hold down the power button until the LED indicator alternatively flashes blue and red. | |
| Pioneer | SE-MS7BT | Headphones | SE-MS7BT | Start with the headphones turned off. Hold down the power button until the LED indicator flashes red and blue and the headphones enter pairing mode. | |
| Plantronics | Backbeat Fit | Earphones | PLT_BBFIT | Power on the headphones by pressing the power button until you hear "pair mode" and the LED light flashes red and blue. | |
| Plantronics | Backbeat Pro | Headphones | PLT_BBTPRO | Press and hold the Call button until the LEDs flash red and blue | |
| Plantronics | Backbeat Sense | Headphones | | Slide and hold the power button towards the Bluetooth icon until you hear "pairing" and the LED flash red and blue. | |
| Plantronics | Explorer 10 | Headset | PLT_E10 | Press the Call button until the indicator light flashes red and blue and you hear "pairing." | |
| Plantronics | Explorer 50 | Headset | PLT_E50 | Press the Call button until the indicator light flashes red and blue and you hear "pairing." | |
| Plantronics | Marque 2 M165 | Headset | PLT_M165 | Press and hold the call control button on the headset for about 5-6 seconds until the light on the headset starts flashing red-white. Release the button and set the headset aside. | |
| Plantronics | Voyager Legend | Headset | PLT_Legend | Press and hold Call button until you hear "pairing" and the headset LEDs flash red and blue. | |
| Plantronics | Voyager V5200 | Headset | PLT V5200 Series | With the headset powered on, press and hold the Call button until you hear "Pairing." The headset LEDs will flash blue and red. | |
| Plugable | BT-ARC1A | Audio receiver | Plugable ARC1A | Unplug the BT-ARC1A from AC power and plug it back in. The Plugable ARC1A will go into pairing mode. | |
| Plugable | BT-BOX4S | Speaker | Plugable BT-BOX4S | Press and hold the INPUT button until you hear a pairing sound. LED will blink blue to indicate pairing mode | |
| Plugable | BT-HSFLEX | Headset | Plugable BT-HSFLEX | Turn on the headset using the power switch. Press the Phone Button (MFB) for 3 seconds, until you hear 'Pairing' through the earbuds. Pairing mode will last 30 seconds. | |
| Plugable | BT-STAND | Speaker | Plugable BT-Stand | Turn on the BT-Stand. If it isn't already connected to another device, it will go into pairing mode. | |
| Plugable | BTHS40B | Headset | Plugable BTHS40B | Press the Multi-Function Button (MFB) for 3 seconds, until the LED alternately flashes red and blue. Pairing mode will last 3 minutes. | |
| Polaroid | P3B0T0R1CBK | Speaker | | Turn on the speaker. A beep will be heard and the LED light indicator will blick RED and BLUE, indicating the unit is in pairing mode. | |
| Proxelle | Solo | Earphones | | | |
| Pyle | PDA6BU | Stereo | PDA6BU | | |
| Razer | Hammerhead BT | Earbuds | Razer Hammerhead BT | From a powered-off state, hold the multi-function button for at least 5 seconds until the in-ear headset enters pairing mode. While in pairing mode, the LED indicator will blink green and a pairing tone can be heard. | |
| RCA | RTS7010B | Soundbar | RCA RTS7010B | On your soundbar, press the Source button on the unit or button on the remote control to select BT (Bluetooth) mode. The Bluetooth indicator light on the soundbase will blink | |
| Realistic by Radio Shack | BT ANC 3301750 & 3301751 | Headphones | "Realistic BT ANC" | If the headphones are off, press and hold the power button for 2 seconds. If the headphones are already on, press and hold the Bluetooth button for 2 seconds. The LED will alternately flash red and blue. | While the headphones are on, press and hold the power and Bluetooth buttons simultaneously for 3 seconds |
| Rockville | Power Gig RPG-122k | Speaker | ROCKVILLE | Make sure the speaker's power switch is On. With the pushbutton above the RCA inputs, select MP3 input. Push the Mode button until you are in Bluetooth Mode. | |
| Samsung | EO-BG935 (Level U Pro) | Headphones | Samsung Level U Pro ANC | Slide the Power switch to the right and hold it for approximately three seconds to enter Bluetooth pairing mode. | |
| Samsung | K450 | Soundbar | [AV] Samsung Soundbar K450 K-Series | Press the (Source) button on the side panel of the soundbar's main unit, or the SOURCE button on the remote control to select the BT mode. You will see BT READY on the front display of the Soundbar. | |
| Samsung | Level U Pro | Headphones | | On the headphones, slide the Power switch to the right and hold it for approximately three seconds to enter Bluetooth pairing mode. | |
| Samtomi | Hoop | Headphones | | With the headset off, press and hold the power button until the blue and red indicator lights on the left ear cup flash alternately | |
| Senbowe | SX-990 | Headphones | SX-990 | Switch to "On." The headphones will prompt "Ready to pair" after 5 Seconds. The red and blue lights flash alternately when headset is ready for pairing. | |
| Sennheiser | HD 4.40BT | Headphones | | Press the power button on the headphones for four seconds until you hear a voice that says "Power on" and heap a beep sound. The LED will flash red and blue. | |
| Sennheiser | mb 660 | | | Switch On the headset. If it doesn't automatically enter pairing mode, press the Sound Effect Mode button for 4 seconds or until you hear tones and a voice prompts "Pairing." The LEDs will flash white in sequence. | |
| Sennheiser | Momentum 2.0 | Headphones | MOMENTUM M2 AEBT | Switch the headphones off. Press the power button and keep it pressed until you hear the voice prompts "Power On" and "Pairing" and the LED flashes red and blue. | Switch the headphones off. Press the power button and keep it pressed until you hear the voice prompts "Power On" and "Pairing" and the LED flashes red and blue. Next, simultaniously press the 3-way multi-function button and the power button for three seconds. The LED flashes three times and the headphones change to pairing mode. The pairing settings are cleared from the headphones |
| Sennheiser | PX 210 BT | Headphones | PX 210 BT | When switched on for the first time, the headphones automatically go into pairing mode. To add another device, press the "Master" button and keep it pressed until the LED alternately flashes blue and red. | Press the "Master" button (5) and keep it pressed until the LED flashes red three times. The headphones will switch off. When turned on again, they will enter pairing mode. |
| Sennheiser | Presence | Headset | | Turn off the headset by pushing in the power slide. Pressing the multi-function button, gently pull the on/off power slide away from the headset. The LED will alternate between red and blue, indicating the headset is in pairing mode. | |
| Sennheiser | PXC 550 | Headphones | PXC 550 | Turn the headphones on. Press the Effect Mode Control Button for 4 seconds or until you hear tones and the voice prompt "Pairing." The LEDs will flash in sequence on the headphones. Two icons for the headphones should show up in the Manage Bluetooth Devices list on the computer. Click the one that shows headphones, then select Pair. Contact us at support@plugable.com for Windows 7. | Switch the headphones off then on again. Next, press the Effect Mode Control button for four seconds. The headphones will say, "phone x disconnected" and "Pairing." The LEDs will flash white in sequence. Next press the Effect Mode button again for four seconds until you hear tones and "Pairing List Cleared." The LEDs will flash in sequence again. |
| Senso | ActiveBuds S250 | Earbuds | ActiveBuds S250 | With the earbuds off, press and hold the Multifunction button for 5 seconds until the LED flashes red and blue. | |
| Sentry | BT-200 & others | Headphones | | Turn on the headphones. Bluetooth pairing will activate automatically. | |
| Sharkk | Boombox | Speaker | SHARKK | To connect your speaker to a Bluetooth enabled device, hold your phone or other device within 3 feet of your speaker, press and hold the Play/Pause button for 3 seconds, and the system will then enter pairing mode and you should see the indicator light flashing blue and red. | |
| Skullcandy | Crusher wireless | Headphones | CRUSHER WIRELESS | With the headphones off, press the power button for at least five second until the LED flashes. | |
| Skullcandy | Jib | Earbuds | | Turn off the earbuds. Press the button on their controller for five seconds. The LED will flash, indicating pairing mode. | |
| Skullcandy | Ink'd wireless headset | Earphones | | Hold down the middle button on the earbuds until the light flashes blue and red. | |
| Skullcandy | Method | Earphones | | Hold the main function button down for 5 seconds. The LED will flash red and blue to indicate pairing with a Bluetooth device | |
| Skullcandy | Smoking Buds 2 Wireless | Earphones | SB2 Wireless | Press and hold the skull symbol on the earphone's volume controller for five seconds until the LED flashes. The earphones will enter pairing mode. | |
| Sony | DR-BTN200 | Headphones | DR-BTN200 | Start with the headphones powered off. Press and hold the POWER button for more than 7 seconds while this unit is turned off. The indicator will start to flash blue and red alternately after releasing the button. | |
| Sony | H.ear on MDR-100AAP | Headphones | | Press and hold the power button on the headphones for at least 7 seconds, until the LED flashes blue and red. | |
| Sony | H.ear MDR-100ABN | Headphones | | Press and hold the power button on the headset for seven seconds, until the LED indicator flashes red and blue and a voice says "Bluetooth Pairing." | |
| Sony | MDR-1000x | Headphones | MDR-1000x | Turn off the headphones. After turning them off, press and hold the power button for 7 seconds. The LED indicator will flash red and blue and a voice will say "Bluetooth Pairing." | |
| Sony | MDR-XB650-BT | Headphones | MDR-XB650-BT | Press and hold the POWER button for about 7 seconds. Make sure that the indicator flashes blue and red alternately after you release the button. | |
| Sony | MDR-XB950BT | Headphones | MDR-XB950BT | Press and hold the POWER button for about 7 seconds. Make sure that the indicator flashes blue and red alternately after you release the button. | |
| Sony | MDR-XB950B1 | Headphones | MDR-XB950B1 | Press and hold the POWER button for about 7 seconds. Make sure that the indicator flashes blue and red alternately after you release the button. | |
| Sony | MDR-XB950N1 | Headphones | MDR-XB950N1 | On your headphones, press and hold the power button for about 7 seconds. Make sure the indicator light flashes blue and red after you release the button. A voice will say "Bluetooth Pairing." | |
| Sony | MDR-ZX220BT | Headphones | | Enter pairing mode on the Sony headphones. To do this, press and hold the POWER button for about 7 seconds. Make sure that the indicator flashes blue and red alternately after you release the button.
| |
| Sony | MDR-ZX750DC | Headphones | MDR ZX750DC | Place your Sony headphones within 1 meter (3 feet) of the Plugable adapter. Enter pairing mode on the headphones as follows: 1. Press and hold the Power button for more than 7 seconds. 2. Make sure that the indicator flashes blue and red alternately after you release the button. | |
| Sony | MDR-ZX770BN | Headphones | MDR-ZX770BN | Enter pairing mode on the Sony headphones. To do this, press and hold the POWER button for about 7 seconds. Make sure that the indicator flashes blue and red alternately after you release the button. | |
| Sony | MHC-V11 | Speaker | MHC-V11 | On your speaker, press BLUETOOTH to select the BLUETOOTH function. “BT AUDIO” appears on the display. Hold down BLUETOOTH on the unit for more than 3 seconds. “PAIRING” flashes on the display. | |
| Sony | SBH70 | Earphones | SBH70 | Press and hold down the Power key until a blue notification light starts flashing rapidly. | |
| Sony | SRS-X3 | Speaker | | If the (BLUETOOTH) indicator is not flashing quickly in white, press and hold the (BLUETOOTH) (PAIRING) button until the speaker beeps and the (BLUETOOTH) indicator starts flashing quickly in white | |
| Sony | SRS-X55 | Speaker | SRS-X55 | Tap and hold the (BLUETOOTH) PAIRING button until beeps are heard and the (BLUETOOTH) indicator begins to flash quickly in white. | |
| Sony | SRS-X7 | Speaker | SONY:SRS-X7 | Tap and hold the (BLUETOOTH) PAIRING button until beeps are heard. The (BLUETOOTH) indicator begins to flash quickly in white, and the speaker enters pairing mode. | |
| Sony | SRS-X11 | Speaker | | Press and hold the (power) PAIRING button until you hear beeps and the (BLUETOOTH) indicator begins to flash quickly in white. The speaker enters pairing mode. | |
| Sony | SRS-XB10 | Speaker | SRS-XB10 | On your speaker, press and hold the speaker's Power/Pairing until you hear beeps and the Bluetooth indicator begins to flash quickly in white. | |
| Sony | SRS-XB2 | Speaker | | Turn the speaker on, then press and hold the Bluetooth button to activate pairing mode. The light on the button will blink indicating the speaker is in pairing mode. | |
| Sony | STR-DR1040 | Receiver | | 1. Place the computer near the receiver. 2. Press BLUETOOTH on the Receiver. You can also select "Bluetooth" from "Listen" in the Home menu. 3. Press OPTIONS. The options menu appears. 4. Select "Pairing", then press "+" (Plus). 5. Press "+" to start the pairing. "Pairing. Make the Bluetooth device ready to be detected by the receiver." appears on the TV screen. | |
| Sony | WI-4000 | Headset | | Turn on the headset. Press and hold the Power button for about 7 seconds. This will activate pairing mode. The LED should flash red and blue after you release the button. You will hear a voice saying "BLUETOOTH Pairing." | |
| Sony | WI-1000x | Headphones | | Press and hold the POWER button for about 7 seconds. Make sure that the indicator flashes blue and red alternately after you release the button. | |
| Sony | WH-1000XM2 | Headphones | WH-1000XM2 | Press and hold the POWER button for about 7 seconds. Make sure that the indicator flashes blue and red alternately after you release the button. | |
| Sony | WH-1000XM3 | Headphones | | On the headphones, press and hold the power button for 7 seconds, until the blue LED indicator flashes like this: flash-flash-pause-flash-flash-pause. You should also hear a voice prompt that says: "Bluetooth pairing." | |
| Sony | XAV-AX100 | Receiver | XAV-AX100 | On your receiver, press HOME, then touch Settings. Touch (General Settings). Touch Bluetooth Connection, then set the signal to ON. The Bluetooth signal will be turned on (the receiver will go into pairing mode) and a Bluetooth icon will appear on the status bar of the unit. | |
| Sony | ZSRS60BT | Boombox | ZS-RS60BT | Press BLUETOOTH to turn on the Bluetooth function. If no devices have been paired, such as when you press BLUETOOTH for the first time, the unit automatically enters pairing mode, and the Bluetooth indicator and the word "PAIRING" flash on the display. To pair to a second Bluetooth device, hold down BLUETOOTH until two beeps are heard. | Hold down ERASE until "BT RESET" appears on the display. Then press ENTER. When the paired device information is cleared the word "COMPLETE" appears on the display. |
| SoundPal | Cube F1 | Speaker | | Press and hold the Call/Music button (with telephone and play/pause symbols). Then turn it off and back on again. You will see the LED flash blue. | |
| SoundPeats | Force | Earbuds | | Power on the headset, press and hold the Multifunction button for approximately 3 seconds until the LED indicator flashes blue quickly (you will hear the voice prompt “power on” first, just keep holding the Multifunction button). Now the headset is in pairing mode. | |
| Syllable | D900 | Earbuds | D900 | With the earbuds powered off or while the blue LED is flashing, hold the button on one of the earbuds for 3 to 4 seconds, until the LEDs alternate rapidly between red and blue | |
| Symphonized | NGR Bluetoth wood in-ear headphones | Earphones | | Hold the middle circle button on the earphones for 3 seconds until the light flashes red and blue, showing they are in pairing mode. | |
| TaoTronics | TT-BH07 | Earphones | TaoTronics TT-BH07 | Press and hold the Multifunction Button (between the volume buttons) for approximately 5 seconds until the LED indicator flashes red and blue alternately. | |
| TaoTronics | TT-BH10 | Earphones | TaoTronics TT-BH10 | Press and hold the Multifunction button for 5 seconds to bring the headphone into pairing mode. The LED indicator will flash red and blue. | |
| TaoTronics | TT-BH040 | Headphones | | Turn off the headphones, then press and hold the power button until the LED flashes red and blue (about 5 seconds) | |
| TaoTronics | TT-BR05 | Receiver | | On the receiver, press and hold the power button for 2 seconds until the LED flashes red and blue alternately. | |
| TaoTronics | TT-SK05 | Speaker | TaoTronics TT-SK05 | Turn on the speaker by switching the power button to On. The speaker will automatically go into pairing mode as indicated by a flashing green or blue LED. To connect the speaker to a second device, turn off Bluetooth in the first device. | |
| Tivoli | PAL BT | Speaker | Tivoli Bluetooth | Turn The PAL BT to the Off postion. Next, turn the PAL BT switch to the “BT” position. This will power on the Bluetooth. Turn the volume up about ¼ to start. Depending on your device, you may need to make multiple attempts at Pairing and/or Connecting to the PAL BT, but please give your device adequate time to Pair or Connect before repeating the process. | |
| Ultimate Ears | Boom 2 | Speaker | | On your speaker, press the UE BOOM's Bluetooth button for 3 seconds. The UE BOOM will enter pairing mode, make a sound, and flash its Bluetooth LED while searching for another device. If you see two entries for your speaker, be sure to click on the one that has a headphones icon. Don't click the one with a picture of a computer monitor and a phone. For Windows 7, please contact us at support@plugable.com | |
| Ultimate Ears | Megaboom | Speaker | MEGABOOM | On the Megaboom, hold down the Bluetooth button (above the power button) until you hear a tone. The Bluetooth connection button will blink rapidly, meaning the speaker is ready for pairing. | |
| Ultimate Ears | Mini Boom | Speaker | | Press UE MINI BOOM's Bluetooth button for 3 seconds. UE MINI BOOM will enter pairing mode, make a sound, and flash its Bluetooth LED while searching for another device. | |
| Ultimate Ears | Plattan | Headphones | | Turn off the headphones. Press and hold the power button for 6 seconds. The ‘power on’ tone will sound after 1 second and when entering pairing mode, a second tone will sound. | |
| Ultimate Ears | Plattan 2 | Headphones | | Turn off the headphones. Press and hold the power button for 5 seconds until the LED blinks blue | |
| Ultimate Ears | Roll 2 | Speaker | UE Roll 2 | On the UE Roll, press and hold the Bluetooth button until you have the tone. | |
| Ultimate Ears | WONDERBOOM | Speaker | WONDERBOOM | On the speaker, press and hold the Bluetooth button on top until you hear a tone. | |
| UVOKS | Bluetoooth V4.1 | Earphones | | Press the power button on the headset for at least five seconds. The LED should flash red and blue, indicating the headset is in pairing mode. | |
| Victrola | 6-in-1 Music Center | Music Center | Wooden Music Center | On the music center, select FM/Bluetooth mode with the selection knob. Slide the slide switch to the Bluetooth symbol. The ST/BT indicator will flash blue. | |
| Vizio | S4251w-B4 | Soundbar | VIZIO S4251w | Press and hold the Bluetooth button on the Sound Bar for five (5) seconds or use the BT Pair menu option from the remote. When the Sound Bar is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Bar will light sequentially from left to right and back again. | |
| Vizio | SB2920 | Soundbar | VIZIO SB2920 | Press and hold the Bluetooth button on the Sound Bar or the Bluetooth button on the remote for five (5) seconds. When the Sound Bar is in Bluetooth Pairing Mode, the LED indicators on the Display Panel on the front of the Sound Bar will light sequentially from bottom to top and back again. | |
| Vizio | SB3651-E6 | Soundbar | VIZIO SB3651 | Press and hold the Bluetooth button on the sound bar for five (5) seconds or select the BT Pair option from the display remote menu. When the sound bar is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Bar will light sequentially from bottom to top and back again. | |
| VTIN | VBT008B | Headset | | Turn on the headset by holding the sliver button (located at the connecting point of the boom mic to the ear phone)..Hold the button down for a few seconds until you see a blue blinking light right above the button. (If It blinks red, you need to charge the headset). | |
| VXI | Blueparrott B250-XT, B350XT, B450-XT | Headset | | With the headset powered off, press the MFB until the light rapidly flashes blue and you hear the audio prompt "Power on." Keep holding the MFB for approximately 10 seconds until you hear "Discovering" (B350-XT), "Pairing Mode" (BT450-XT), or two rising tones followed by four more tones (BT250-XT). | |
| Xiaomi | Mi | Speaker | | On your speaker, press and hold the Start/Stop button for two seconds, until you hear a beep. | |
| Yamaha | R-S202BL | Receiver | Yamaha | Press the Bluetooth source button on the remote for more then 3 seconds to enter pairing mode. Pairing mode lasts for 5 minutes. In pairing mode, the front panel display of this unit will indicate “PAIRING,” and the Bluetooth indicator will blink. | |
| Yamaha | YBA-11 | Receiver | YBA-11 Yamaha | Turn on the Bluetooth function to go into pairing mode. | |
| Yamay | BH-M9 (Generic Chinese made. Others have similar name) | Headset | BH-9 | Press and hold the multi-function button for about 8 seconds, until the indicator light alternates between blue and red, indicating that it is in pairing mode. | |
| Yamay | BH-M20 (Generic Chinese made. Others have similar name) | Headphones | | Press and hold the multi-function button (the big one at the base of the mic) for about 8 seconds, until the light alternates between blue and red, indicating that it is in pairing mode. | |