HP Tools Questins QC QTP.XLS


1	QTP Questions
2	Q.No	Correct Answer	Question	Option1	Option2	Option3	Option4

3	1	1	We can differentiate the object of the same class in Application Under Test using	Object characteristics	Will not be able to differentiate the object	Question is not clear	none
4	2	1	What is the initial step in software test automation?	Perform Automation Assessment	Test Automation Planning	Both A&B	None of the above
5	3	1	What will be done in Integrate phase of QTP workflow	Run multiple tests to check the flow of data	Record user actions to generate the basic test	Prepare Test automation environment	All of the above
6	4	2	In which Automation Trend, Actions/keywords are recorded or generated?	Capture and playback	Keyword Driven Approach	Data driven approach	All of the above
7	5	2	QTP workflow	Plan, Create, Verify, Integrate	Prepare, Create, Verify&Enhance, Integrate	Plan, Create, Verify&Enhance, Integrate	Prepare, Create, Integrate, Run
8	6	2	What method is used to send runtime values from the application to datatable	IMPORT	VALUE	SETVAL	EXPORT
9	7	2	Which application must be started first in order to ensure that QTP will be able to start to automate testing?	The application under test	Quick Test Professional	Neither of the above	Host System
10	8	2	Which are two tabs where we can see our script and the steps	Active Screen and Keyword view	Keyword view and Expert view	Expert view and Active Screen	All of the above
11	9	2	Which category does QTP belongs to	Performance testing tool	Functionality testing tool	Memory management tool	Test Management tool
12	10	3	For opening the quick test professional help we can use………	F3	F5	F1	F2
13	11	3	In which phase of test automation process, the designed test automation solutions are developed and tested as quality tools and also make sure that the developed tools are reliable and reusable with good documentation	Test Automation Planning	Test Automation design	Test tool Development	Test tool deployment
14	12	3	When outlining your test steps, what principle is important to implement so a test can be re-used any number of times?	Load the appropriate add in	Have all required applications running on the desktop	Set initial and end conditions as part of the test	None of the above
15	13	4	Benefit of Automation testing	Reusability	Consistency	Productivity	All of the above
16	14	4	Failures in test automation can be	No proper project planning	Lack of structured Automation Methodology	No modularization in Automation scripts	All of the above
17	15	4	Functional testing enables you to verify _______ feature of AUT	Accuracy	Reliability	Predictability	All of the above
18	16	4	Two approaches for functional testing are	Test Plan	Manual Testing	Automation Testing	Both B & C
19	17	4	What type of tool C++ test is	Memory Management tool	Test Management tool	Performance testing tool	White box testing tool
20	18	4	Which are the Building blocks of a Test step	Item, operation, documentation	Operation,value, comment	Value,operation, assignment	Item,operation,value
21	19	4	Which are the default columns available in Keyword view	Item,Values, Assignment,Operation	Item,Values, Comment,Operation	Item,Values, Comment,Assignment	Item,Values,Operation,Documentation
22	20	1	A yellow arrow in the left margin of the Keyword View indicates	The step currently running	The step under debug	Both of the above	None
23	21	1	Generate Script is in which tab of Test Settings (File > Settings) Window.	Properties	Web	Resources	Recovery
24	22	1	Press …… to add a new step below the currently selected step	F8	Shift+A	F0	Shift+A+Q
25	23	1	QTP Script files are stored with the extension	*.mts	*.usr	*.mtr	*.vbs
26	24	1	Run time objects properties will be available for which of the below mentioned environment	Activex	Windows standard	Visual Basics	None of the above
27	25	1	The documentation cell is ……..	Read only	Write only	Read and Write	Read write and execute
28	26	1	The Documentation Column in Keyword View is	Read-Only	Write-Only	Read and Write	Read, Write and Execute
29	27	1	The shortcut key for Record, Stop and Run respectively are	F3, F4, F5	F4,F3,F5	F4,F5,F3	F3,F5,F4
30	28	1	To View the "Test results" window after every test run automatically select option	View results when run session ends	View results when run session begins	Save still images captures to results	View results when record session ends
31	29	1	What is the most appropriate Record and Run setting when you expect that the Windows application will be already running on the desktop when the test starts	Record and Run test on any open Windows-based application.	Record and Run on these applications (opened on session start).	Both of the above.	None of the above
32	30	1	What is the significance of Action0	The directory contains files that control all actions	The directory contains files that controls script file	The directory contains files that controls Repository file	None of the above
33	31	1	Which of the following statement is true:	Quick test enables you to open and work on one test at a time.	Quick test enables you to open and work on two tests at a time.	QuickTest enables yoy to open and work on predefined number of tests at a time.	QuickTest enables you to open and work on nine test at a time.
34	32	2	…………displays the open documents side by side	Tile Vertically	Tile Horizontally	Casecade	Tile Casecade.
35	33	2	Add-ins that are installed separately from the quick test professional installation are referred to as ……add-ins.	Internal	External	Buit-in	Built-out
36	34	2	Expert View contains each step as a VBScript line. In object based steps, the VBScript line defines the	Action	Object	Test	Step
37	35	2	How can you tell that QTP is in the “Record” mode?	The Keyword View changes.	The word “Recording” flashes in the lower right corner of the interface.	There is no indication.	None
38	36	2	Movie of the Test run steps are available in which tab of QTP Results window	Run time data table	Screen Recorder	Result details	Both B and C
39	37	2	QTP scripts are saved in default	As a XML file	As a Folder	As a File with extension .tsr	All of the above
40	38	2	Quick Test does not define any object information. It uses the same information from application	That user defined	That developers defined	That testers defined	Statement itself is wrong
41	39	2	Record and Run Settings window contains two tabs.	Web and Window	Web and Windows Applications	Web and Window Applications	Web and Windows Application
42	40	2	Script file will be created in which folder of the test directory structure	Action0	Action1	Parameters	None of the above
43	41	2	The Default add-ins available in QTP are	ActiveX, PowerBuilder, Web	ActiveX, Visual Basic, Windows	ActiveX, Visual Basic, Web	PowerBuilder, Visual Basic, Web
44	42	2	The Default licence type for add-ins is	Temporary	Build-In	Permanent	None of the above
45	43	2	The following are the four main columns in the Keyword view.	Item, Operation, Value, Comments	Item, Operation, Value, Documentation	Item, Operation, Property, Documentation	Number, Operation, Value, Documentation
46	44	2	To Expand all the steps in the keyword view which option you would use from the View menu.	Expand	Expand all	Expand Items	Expand Rows
47	45	2	What "*" represents along with the test name in title bar of QTP?	Test is a critical test	Test is modified but not saved	Both A&B	None of the above
48	46	2	What is the first step to change the logical name of an object recorded by QuickTest	Veiw the test results	Open the Object Repository	View the documentation field in the keyword view	None
49	47	2	what is the recommended capture level for Active screen while test recording?	Low	Partial	Complete	Speed
50	48	2	Which are the default add ins in QTP	.Net,Java,Visual Basic,	Visual Basic,Activex,Web	Web,Java,SAP	Activex,SAP,Web
51	49	2	Which run mode enables the user to see execution marker during execution	Fast	Normal	Both of the above	None
52	50	3	_______refers to data that you specify for the operation performed on the AUT object	Item	Operation	Value	Comment
53	51	3	An operation cell in the keyword view specifies the operation to be performed on the item listed in the……... column	Operation	Documentation	Item	Value
54	52	3	Check the "Allow Other Mercury Products to Run Tests and And Components checkbox to connect to which HP products	Performance Center	Quality Center	Both of the above	None
55	53	3	How many ways of Recording are there in QTP?	1	2	3	4
56	54	3	If no add-ins are selected in QTP, record and run settings under automation tab will display	Web and Windows Application Menu	Only Web Menu	Only Windows Application Menu	ActiveX Menu
57	55	3	If the add-in manager dialog is not displayed on startup of QTP, where would you set this option	tools->view options	tools->object identification	tools->options->general	file->settings->general
58	56	3	In the Step: Window -> Object -> Select "Bangalore" identify the class object in which Bangalore is selected	Edit	RadioGroup	ComboBox	Button
59	57	3	Specify the correct sequence of QTP work flow	Integrate,Create,Prepare,Verify&enhance	Prepare,Create,Integrate,Verify & Enhance	Prepare,Create,Verify & Enhance,Integrate	None of the above
60	58	3	Test Pane in QTP contains	Only Keyword View	Only Expert View	Both Keyword and Expert View	Keyword View, Expert View, Datatable and Active Screen
61	59	3	The …….. Tab enables you to run a line of script to set or modify the current value of a variable or VBScript object in your test or function library.	View	Variables	Command	Current
62	60	3	The …….. Toolbar contains buttons for recording and running your test.	Standard	Tools	Automation	Edit
63	61	3	The Operation Cell in the Keyword View specifies the operation to be performed on the item listed in the --------------- column	Operation	Documentation	Item	Value
64	62	3	The purpose of loading a add-in in QTP	Enables QTP to run fast	To restore the layout of the tool	Enable QTP to recognize AUT objects	Both B and C
65	63	3	What is the purpose of loading an add-in?	To help the perfomance of QuickTest Professional	To restore the layout of the QuickTest window so that it displays the panes in their default sizes and positions	To enable QuickTest Professional to recognize objects in the AUT development environment.	Both B and C
66	64	3	When Quick Test opens, you can chose which of the installed add-ins you want to load using the quick test professional- ……. Dialog box.	Add-In Window	Add-In	Add-In Manager	Add-In Management
67	65	3	Which tool is available to help analyze the outcome of a test run?	The Active Screen.	The Global data table.	The test results.	The Record and Run settings.
68	66	3	While running the test if you select the option "New run results folder", By default the results are stored in	Action0 folder	Action1 Folder	Test Directory structure folder	All of the above
69	67	3	You can view the currently installed Addins by	File -> Settings	Tools->Options and click the General tab	Help->About QuickTest Professional	Both A & B
70	68	4	An Item column can be any of the following	A test object	A statement like Dim	A step generated by step generator	All of the above
71	69	4	During Recording QTP:	Learns Window Name of the recordedObject	Learns Class Name of the recordedObject	Writes a Expert view statement	All of the above
72	70	4	If you focus on a specific step in Keyword View and switch to Expert View, the cursor will be located at which line of the test?	Next	Previous	Last	Corresponding
73	71	4	Please choose the options available for Record and Run Settings "Record and Run only on"	Applications opened by Quick Test	Applications opened via the Desktop	Applications specified below	All of the above
74	72	4	Purpose of exporting QTP test folder to Zip file	To compress the test folder to conserve hard disk space	To ensure easy transfer of tests within a network	To expand tests for better visibility	Both A&B
75	73	4	QTP uses this mechanism(s) to identify objects during Run session	Object Repository	Smart Identification	Dynamic Object Handling	All of the above
76	74	4	Quality Center is used for	To generate script based on user actions	To maintain requirements, test scripts	To prepare test steps, bug tracking and reporting	Both B&C
77	75	4	The Item coloumn can be any of the following	A Test Object	A DIM Statement	Statement generated by Step Generator	All of the above
78	76	4	The programming Statements which are added using keyword view will contain	Recordable test object methods and operations	Non-recordable test object methods and operations	VB script programming commands	All of the above
79	77	4	What access permissions do the test and testers need to have	Database	Host systems	Input/Output data	All of the above
80	78	4	when the option "Save still image captures to results" is set to "Always" then	still images are captured to results when test is passed	still images are captured to results when test is failed	still images are captured to results when test raises warnings	at any of the above situation
81	79	4	Which of the following is a invalid status message option?	Pass	Done	Warning	Abort
82	80	4	While working with the keyword view, you can ………steps to move them to a different location in a test or in an action	Copy and Paste	Cut and Paste	Drag and Drop	Both A and C
83	81	4	You can use the Keyword view to add a step ………. In your test.	At the end	Below the currently selected step	at the beginning	at anypoint
84	82	4	You can view ………….while working with keyword view.	Object Properties	Action Properties	Action call Properties	All of the above
85	83	1	Changing the logical name of the object	Enhances Script readability	Enhances Object Identification	All of the above	None of the above
86	84	1	In the Object Spy window, in the properties tab	Copying of values and its properties can be done using CTRL+C	Copying can be done by right clicking on it and selecting copy	Both A & B	Cannot be copied
87	85	1	Object Repository will contain	Only Recorded Object Properties	All available properties	Depends on Scripting	None of the above
88	86	1	Object spy dialog box	Can be resized	Cannot be resized.
89	87	1	The …..is not accessible as a separate file	Local object repository	Shared object repository	both	None of the above
90	88	1	The object repository window is ……. During record and run sessions	Read only	Read-Write only	Read, write, Enabled.	None of the above
91	89	1	There are …….. Object type filters in object spy dialog box.	Two	Three	Four	Five
92	90	1	Using the Highlight Feature in Object Repository	Highlight the object in Application	Highlight the object in Repository	Highlights depends on selection either in Object Repository or Application	None of the above
93	91	1	What is the Object spy used for?	We can view the object's properties and values	We can add Objects properties and values to repository	Highlight Object in the AUT	Update Object in the Object Repository
94	92	1	Where do you find only test object properties of a recorded object	Object Repository	Object Spy	In Expert View	Both A & B
95	93	1	Which icon on the QTP toolbar represents the Object Spy?	The man	The bulls eye	The paper and glasses	None of the above
96	94	2	"Locate in Object Repository" feature	Enables to locate the object in the application under test corresponding to the one existing in the object repository	Enables to locate the object in object repository corresponding to the one existing in the application under test	None of the above	All of the above
97	95	2	………..Method loads the specified object repository	Overload	Load	Both A and B	None of the above
98	96	2	After identifying the class and properties qtp assigns name to the object and that name will be used in the script, what is that name called as	Object Name	Logical name	No name	None
99	97	2	By default test objects are stored in which object repository	Shared	Local	Both Shared and Local	Global
100	98	2	By default, how QTP passes arguments to procedure?	ByValue	ByRef	ByArg	All of the above
101	99	2	During run time QTP uses which type of objects for identification	Utility Objects	Test Objects	Run objects	Both A and B
102	100	2	How to save a local object repository as a Shared object repository	Resources->Object repository->objects->add objects	Resources->Object repository->file->export local objects	Resources->object repository->file->save as	None of the above
103	101	2	In general the …….object repository is easiest to use when you are creating simple record and run tests.	Shared	Local	Both	None of the above
104	102	2	Test Object Class methods can be overridded by user defined functions with the help of	RegisterUserFunction	RegisterUserFunc	RegUserFunc	RegUserFunction
105	103	2	The ……. Property set for each test object is created and maintained by quicktest.	Run-time object	Test object	Smart Identification object.	Assistive object.
106	104	2	To change the logical name of an object recorded by Quick Test, which step should you take first?	View the test result	Right-click on the object in the keyword view and select object properties> View in Repository	View the documentation field in the keyword view	None of the above
107	105	2	What is file extention of local object repository	.mts	.mtr	.trs	.qrs
108	106	2	You created a test in QTP. If any one object Properties are changed, in next release of AUT what you will best prefer before test run	Recapture all objects properties	Update the changed test object properties with AUT object	Create entire test and run	Object Spy
109	107	3	_________ is used to view and modify the predefined set of properties of all object classes	Object repository	Object repository manager	Object Identification	Virtual object manager
110	108	3	Defining a New Test object through Object Repository	Tester can create new test object for the AUT helping the developer in their roles	Tester can enhance the functionality and identification of the already created test object using this feature	Testers can define new test objects in object repository planned to come in future that does not exist in the application presently	All of the above
111	109	3	If QTP cannot find any object that matches the description, or if it finds more than the object that matches, Quick test may use the …….. Mechanism to identify the object.	Ordinal Identifier	Index Identifier	Smart Identification	Assistive Identification
112	110	3	Object spy can be found in …….menu	Tool	Tools	Task	Tasks
113	111	3	Object Spy is used	To add objects in Repository	To modify objects in Repository	To view all available properties of a application object	All of the above
114	112	3	What is the file extension of shared object repository	.mts	.mtr	.tsr	.qrs
115	113	3	What is the shortcut key for opening an Object Repository.	Alt+R	Shift+R	Ctrl+R	Shift+O+R
116	114	3	Which of the following would represent a QTP object class?	Test	Data entry	Drop-down list	None of the above
117	115	4	Object Spy is used	For troubleshooting when run error comes during execution	To know the parent class of the selected object	To know the available properties of the selected object	All of the above
118	116	4	Using Object repository	We can view the objects all properties & values	We can learn & view the objects specific properties & values	We can define a new test object	Both B&C
119	117	4	Which of the following will be viewed when we point to an object using Object Spy	Properties	Values	Methods	All of the above
120	118	1	Adding Synchronization during recording	Will make a conditional wait in Script at run-time	Will make a unconditional wait in Script at run-time	Will make a conditional wait in AUT at run-time	Will make a unconditional wait in AUT at run-time
121	119	1	How many tabs are there in Test Settings (File>Settings) window.	7	6	5	8
122	120	1	Identify the tabs in the Test Settings (File > Setttings) Window	Properties, Run, Resources, Paramenters, Environment, Web, Recovery.	Properties, Run, Resources, Paramenters, Environment, Web Settings, Recovery.	Properties, Run Options, Resources, Paramenters, Environment, Web, Recovery.	Properties, Run, Resources, Input Paramenters, Environment, Web, Recovery.
123	121	1	Synchronization can be used	Only if visual cue is determined during run session	At any time we need QTP to wait for the application process to complete the process	At any time we need application to wait for QTP to complete the process	All of the above
124	122	1	Synchronization is used to	Instructs QTP to wait for the application process to complete before proceeding to the next step in the test	Instruct application to wait for QTP to complete the process before proceeding to the next step in the application	Both A & B	None of the above
125	123	1	What is the default time out of QTP	20sec	40sec	10sec	none
126	124	2	……..statement- Initiates a pause during a run session.	Wait Property	Wait	Sysnc	Exit
127	125	2	A synchronization point can be added to the script through	The Active Screen	The Insert Menu	The Tools Menu	Both A & B
128	126	2	A Synchronization point can be added to the test from	The Active Screen	The Insert Menu	The Tools Menu	The Automation Menu
129	127	2	Does Synchronization point enabled after recording	Enabled	Disabled	None	not sure
130	128	2	During recording the global time out of object synchronization is set to 30 seconds. After recording before test run it is set to 10 seconds, and synchronization point waiting time is 10 seconds. To finish that specific task AUT is taking 25 Seconds. Total how much time QTP waits in this Situation	30 sec	20 sec	25 sec	40 sec
131	129	2	The default global window object synchronization timeout is	10000 ms	20000 ms	30000 ms	40000 ms
132	130	2	What is the function of a synchronization point?	To update test data	Conditional Wait	Unconditional Wait	Pauses test execution
133	131	3	What operation in the Flight AUT might require synchronization?	Entering the passenger name	Deleting an order	Inserting an order	Selecting the business class
134	132	3	Adding Synchronization point, checkpoints comes under which phase of QTP workflow	Prepare	Create	Verify/Enhance	Integrate
135	133	4	……….Method waits for the browser to complete the current navigation	Exist	Wait	WaitProperty	Sync
136	134	4	How long will QTP wait if: Synchronization timeout is set to 10 sec. and the globle timeout is set to 40 sec. but the actual time for the object to be recognized is 25 sec.	10	40	50	None of the above
137	135	4	If Synchronization fails, test result will report	PASS	FAIL	DONE	WARNING
138	136	4	Select the right option for Visual cues	A progess bar reaches 100% completion	A status message appears	Abutton becomes enabled	All of the above
139	137	4	The difference between using Synchronization and Wait statement in QTP	Synchronization works only if visual cue is determined. WAIT works at all instances	Synchronization is conditional wait; Wait is unconditional wait	Synchronization is unconditional wait; Wait is conditional wait	Both A & B
140	138	4	Which of the following environment is AutoSynchronized	Web Applications	SAP Applications	Visual Basics	Both A and B
141	139	1	………… identifies areas of your web site that may not confirm to the world wide web consortium (W3C) web content Accessibility Guidelines.	Accessibility Checkpoint	Standard Checkpoint	Database Checkpoint	Accessible checkpoint
142	140	1	………Specifies when to perform the checkpoint in the test.	Insert Statement	Check statement	Timeout statement	Checkpoint statement
143	141	1	A Standard checkpoint can be applied to check	All the Properties of an object	only the text	Only Picture	All of the above
144	142	1	All ……..are automatically treated as regular expressions.	Programmatic description	Window	WinObject	Collection
145	143	1	How many checkpoints are available in QTP	7	6	8	5
146	144	1	If you do not want QTP to perform a step or checkpoint until an object in your application achieves a certain status, you should insert ………..point to instruct QTP to pause the test until the object property achivers the value you specify.	Synchronization	Check	Smart Identification	None of the above
147	145	1	The regular expression [A-Z] matches	Single Upper case character from A to Z	Range of upper case letters	Both A and B	None
148	146	1	To compare the values of a specified property during a run session with the values stored for the same test object property within the test is	Checkpoint	Output Value	Synchronization	All of the above
149	147	1	To match a text starting from S and ending with L how do you write the regular expressions	S[a-z]+L	[a-z]+	S*	None of the above
150	148	1	Which is used to check specific property values?	CheckProperty method	CheckItemProperty Method	ItemProperty Method	Property Method
151	149	1	While recording you can insert checkpoints from	The Insert Menu	The Active Screen	The Keyword View	All of the above
152	150	1	You can view the results of the checkpoint in the ……..	Test Result window	Checkpoint window	Information pane	Checklist Window
153	151	2	Dynamically changing object properties can be handelled using	Active Screen	Regular Expressions	Checkpoints	All of the above
154	152	2	How can you make a checkpoint flexible?	Use OBJECT PROPERTIES dialog box	Create and insert a regular expression	Using Active Screen	Both B & C
155	153	2	QTP does not support virtual objects for	Normal and Analog Recording	Analog and Low level Recording	Nornal Recording	Analog Recording
156	154	2	The …..checks a variety of objects such as buttons, radio buttons, combo boxes, lists,and so forth.	Image Checkpoint	Standard Checkpoint	Bitmap checkpoint	Accessibility checkpoint
157	155	2	What is regular expression	The expression that you use regularly	Is a string of special characters that defines conditions of a search	An Arithmetic expression	All of the above
158	156	2	Which option is false with respect to the checkpoint in QTP	A Checkpoint is a specialized step that compares two values and reports the results	A checkpoint cannot be added from Active Screen	A checkpoint compares the actual results from the test run with the expected results in the test plan	Without checkpoint a test cannot be considered as a valid test
159	157	2	You create a Image check point by inserting a ……..on a image object	Image Checkpoint	Standard Checkpoint	Bitmap checkpoint	Accessibility checkpoint
160	158	3	……….Specifies the time interval (in seconds) during which Quick Test attempts to perform the checkpoint successfully.	Check timeout	Checkpoint interval timeout	Checkpoint timeout	Quicktest timeout
161	159	3	Regular expressions can be used in a test to	Set static value in object repository at runtime	To set static value in Checkpoint at runtime	To define a checkpoint that can accept a range of values	Both B & C
162	160	3	What is the Regula Expression Matching Zero or more specific Characters	X	#	*	&
163	161	3	Which is the shortcut key that is used to add a standard checkpoint?	F2	F10	F12	F7
164	162	3	You can use checkpoint to	Verify the state of an object	Confirm that an application performs as expected	Both A and B	Only A
165	163	4	How do you know a checkpoint has been used in a test?	A check mark appears next to the step in the test results.	The operation field of the keyword view lists the operation as “Check.”	A checkmark appears at each level of the test results tree.	All of the above.
166	164	4	How can you make a checkpoint flexible	Use the Object Properties dialog box	Ceate and insert a regular expression	Input data to the parameter using the design time DATA TABLE	Both B and C
167	165	4	When checkpoints are used in a test	The test results will show a result of PASS or FAIL	The Operation Column of Keyword view lists the operation as Check	The Expert view has a statement "check checkpoint" in it	All of the above
168	166	4	Which of the following is not the checkpoint in QTP	Standard Checkpoint	Text Checkpoint	Xml Checkpoint	Object Checkpoint
169	167	4	Why do you use regular expressions in your tests?	To set an object property	To define an object property	To define a checkpoint that can accept a range of values	Both A and C
170	168	1	________ is a place holder for a value that is passed to the test during the test run	Input parameter	Output Parameter	Both A&B	Checkpoint
171	169	1	A step in which one or more values are captured at a specific point in your test and stored for the duration of the run session is:	Output Value	Checkpoints	Active Screen	Test Results
172	170	1	After a test executes, the dynamic values for the test are cleared from the -____________________	Design time Data Table	Run Time Data Table	Both of the above	Only B
173	171	1	Arrange the following steps in sequence for setting the parameter value 1)Click the configure the value button. 2)In Keyword View, select the step that contains the recorded input value. 3)Use the default Global Sheet to store the value. 4)Select eh Parameter option. 5)click on OK button. 6) In the Name field type a unique column name to create a new column in your Data Table.	2,1,4,6,3,5	1,6,4,5,2,3	3,6,4,1,2,5	None of the above
174	172	1	Each row in the table represents the set of values that quick test submits for the …… arguments during a single iteration of the test or action.	Parameterized	Non-Parameterized	Distributed	None of the above
175	173	1	How do you set run settings for Global sheet	File->Settings and Run tab	Test-settings and Run Tab	Automatin->Settings and Run Tab	None of the above
176	174	1	how many types of parameters available in QTP	4types	3types	5types	2types
177	175	1	Identify the option which is not belongs to class category in the options given below	Parameters	Button	Edit box	Combo box
178	176	1	Input parameter names and their values are located in	Data Table	Active Screen	Keyword view	Expert view
179	177	1	The default number of iterations of an Action is	Run on one row	Run on all rows	Run on range of rows	A or B
180	178	1	The default setting for DATA TABLE iteration on an action is	Run one iteration only	Run on all rows	Run rows from
181	179	1	What are the different types of environment variables	Built-in, User defined	Location, Index	Random number, Output value	None of the above
182	180	1	What does DEFAULT.xls file under the test directory contain?	It contains the data that we specify in Datatable to parameterize your test	It contains Runtime data results	Both A & B	None of the above
183	181	1	What is data corelation	Using outputed data as input	Pasing input data from DataTable	Both of the above	Only B
184	182	1	Which are the types of parameters available in QTP	Input,Output,Random number and Environment variable	Input,Bitmap,Random number	only Output and Input parameters	None of the above
185	183	1	You can access and perform ……… methods using the object property.	Run-time object	Test object	Smart Identification object.	Assistive object.
186	184	1	You can retrieve values from your test and store them in the Data table using	Output value	Add Object	Standard checkpoint	Step Generator.
187	185	2	…….parameters are useful for localization testing, when you want to test an application where the user interface strings change, depending on the selected language.	Action	Environment	Test	Parent action
188	186	2	How can we ensure that the test can be iterated?	Ensure appropriate add-ins are loaded	Ensure initial and end conditions are set properly	Both A & B	None
189	187	2	If you create a user defined function manually and do not define the scope as Public or Private, in default the scope will be	Private	Public	Both A & B	Protected
190	188	2	Where can you find the result of an output parameter?	Design time Data Table	Run time Data Table	The .usr file	The object repository
191	189	2	Where can you find the results of a Output datatable Parameter?	Design-time datatable	Run-time datatable	Both Design-time and Run-time datatables	In QTP test folder
192	190	2	You can also encrypt strings in data table cells using the ……… option in the data table menu.	Decrypt	Encrypt	Encrypt code	Decrypt code
193	191	3	……… parameters are available only for top-level actions	Action	Environment Variable	Test	None of the above
194	192	3	How can you ensure that the test can be iterated?	Load the appropriate add in	Have all required applications running on the desktop	Set initial and end conditions as part of the test	All of the above
195	193	3	If the Global data sheet does not contain any rows and the Local Data Sheet contains 2 rows then how many times does the test Iterates	2 times	3 times	1 time	infinite
196	194	3	In a test, The global sheet is having 3 records and Action sheet is having 3 records. By default in each test iteration, how many times action will be iterated?	3 times	6 times	1 time	9 times
197	195	3	In default, design-time datatabe is stored in	QTP Installation Directory	Object Repository	Under Test Folder	Test Results
198	196	3	Input Parameter values are presented in _____	Only in design time data table during & after test run	only in design time data table during test run, only in runtime data table after test run	Both in design time and runtime data table after test run	None of the above
199	197	3	The value cell in the keyword view can contain…… vaule	Constant	Parameter	Both A and B	None of the above
200	198	3	Types of Environment variables available in QTP	System Defined, User Defined	Build-In, System Defined	Build-In,User Defined	None of the above
201	199	3	What are the available environment types?	Built-In, Customized	Customized, User Defined	Built-In, User Defined	Both B & C
202	200	3	Where can you find the results of a Input datatable Parameter?	Design-time datatable	Run-time datatable	Both Design-time and Run-time datatables	In QTP test folder
203	201	3	which are the two ways to import the data of an external action data sheet	Use data stored with original action	Use a local editable copy	Both A and B	None of the above
204	202	3	Which best describes the purpose of an input parameter?	A way to create a parameter standard	A way to set a constant parameter value	A way to drive a variety of data values through a test	None of the above
205	203	3	You can parameterize values in steps and checkpoints while ……your test.	Recording	Editing	Both A and B	None of the above
206	204	4	……..built-in environment variable that tells version of the OS on which you are working	OS	OS_Ver	OSVER	OSVersion
207	205	4	Data driven tests	Eliminate the need for performing multiple tests	Increases test coverage	Provides speed in testing	All of the above
208	206	4	In QTP, you cannot parameterize	Statements	Checkpoints	Object Repository	None of the above
209	207	4	When specifying the names for data table parameter, the first character of the parameter name must be a ……….	Letter	Underscore	number	both A and B
210	208	4	Which method is used to send a run-time data sheet to a excel file?	Send	Export	SendSheet	ExportSheet
211	209	4	which of the following cannot be used in the design time Data Table or while importing data	Combo box	Lists	Conditional Formating	All of the above
212	210	4	You can insert Output parameters from	The Active Screen	The Insert Menu	The Keyword View	All of the above
213	211	4	You can parameterize values …….in your test.	In steps	In checkpoints	Of action parameters	All of the above
214	212	4	You can run tests on which browser	Microsoft Internet explorer	Netscape Browser	Mozilla Firefox	All of the above
215	213	1	A test comprises call to action. When you create a test, it contains a call to a ….action.	1	2	3	Multiple
216	214	1	By default all the actions in a test use which object repository	Local object repository	Global object repository	None of the above	Shared object repository
217	215	1	Call to Copy of Action	Copies the entire code of an action, datasheet and object repository and all are editable in the calling script	Copies the entire code of an action, datasheet and object repository and all are not editable in the calling script	Calls the entire code of an action, datasheet and object repository and all are editable in the calling script	Calls the entire code of an action, datasheet and object repository and all are not editable in the calling script
218	216	1	For every action called in your test, QTP creates a corresponding………in the data table so that you can enter data table parameters that are specific to that action only	Action sheet	Excel sheet	Both A and B	None of the above
219	217	1	If your test calls an external action that is renamed or deleted, where would you find the action?	The Missing Resources pane	The Missing Action Pane	Automantion Menu	Syntax error tab
220	218	1	If you have multiple actions in your test and you want to run from the current action which option you select	Select the Action in the test in Keyword view and select Run Current Action from Automation Menu	Select the Action in the test in Keyword View and select Run from Step from Automation menu	We can not run specific Action	None
221	219	1	when you create a test it includes …….. Action.	Single	Unlimited	Three	Multiple
222	220	1	You can not expand ……..actions from the test flow view.	Reusable	non-reusable	Both A and B	None of the above
223	221	2	______ data sheet of data table provides a source of values that can be used by any action in the test	Local	Global	Shared	Global & local
224	222	2	_________method is recommended which requires maintaining the action only at one place i.e. in the original action	Call to copy of an action	call to existing action	Both A&B	Call to new action
225	223	2	………. Provides a list of the resources that are specified in your test but can not be found.	Missing Pane	Missing resource pane	Resource Pane	Missing Item Pane
226	224	2	If an action has a local repository, can you still associate a shared object repository	No	Yes, always	Can't judge	Only in some situations
227	225	2	If Global sheet contains zero data's and action sheet contains two rows of data, how many times script will iterate in default	0 Times	1 Times	2 Times	3 Times
228	226	2	In the ….., the action list is always visible and the expert view always displays the script for the selected action.	Keyword view	Expert View	Action flow	Action View
229	227	2	QTP creates certain files and directories in each test directory. In that Action0 is:	Directory that contains nothing	Directory that contains files that controls all actions, except Action0	Directory that contains a log of user actions on objects that was captured during recording	Both B&C
230	228	2	Sometimes you may want to call an action from within an action. This is called…….	Reusability	Nesting	Sharing	None of the above
231	229	2	To iterate a specific action in multiple actions test, give the samples in	Global sheet	Particular action sheet	All action sheets	None of the above
232	230	2	When you insert a call to an existing action, the action is inserted in read only format, what will be the state of the Record button ?	Enabled	Disabled	Not Visible	None of the above
233	231	2	Where do you mark an action is reusable?	Action Settings	Action Properties	Action Run Settings	Action Call Properties
234	232	2	where do you set the run settings for each actions	Action Properties	Action Call Properties	Both of the above	Test settings
235	233	2	Which actions can be only only within the test in which it was created?	Reusable Actions	Non-Reusable Actions	Internal Actions	External Actions
236	234	2	Which is a TRUE statement?	Two or more tests can call the same action and one action cannot call another action	Two or more tests can call the same action and one action can call another action	Only One test can call the same action and one action can call another action	Only One test can call the same action and one action cannot call another action
237	235	2	You can manage the test actions and the test or function library steps using the ……menu command.	File	Edit	Automation	Tools
238	236	2	You must use the …….action option in QTP if you want to save an action under another name.	Resave	Rename	Reuse	Split
239	237	3	How many kinds of Actions are there?	1	2	3	4
240	238	3	In QTP, Test Flow appears when test has	Reusable actions	General actions	Called actions	None of the above
241	239	3	The ……enables you to view either the entire test flow or you can view the steps for a selected reusable or external action.	Actiona Flow	Action File	Action List	Action Repository
242	240	3	There are three kinds of actions:	Non-reuse action, reuse action, external Action	Call to internal action, Call to reusable action, External action	Non-reusable action, Reusable Action, External Action	Call to non-reusable action, reusable action, External Action
243	241	3	What is the option to divide already created action into two actions	Call to copy of an action	Divide action	Split action	Separate action
244	242	3	When you open a test, you can choose view……	The test flow (call to action)	you can view and edit individual actions stored with your test	Both A and B	None of the above
245	243	3	where you can set the action as resusable action	Insert call to new action	Action Properties dialog box	Both A and B	None of the above
246	244	3	which are the ways you can call to resusable actions	call to copy of an action	call to existing action	Both A and B	only B
247	245	3	Which of the below mentioned options is not correct with respect to QTP Test Directory Structure	Action0	Action1	Values	default.xls
248	246	4	……………. Are the highest level of the test hierarchy in the keyword view.	Tests	Steps	Call to Action	Actions
249	247	4	Action iteration types that available in Action call properties	Run one iteration only	Run on all rows	Run from rows	All of the above
250	248	4	By default, new actions are	Short	External	Reusable	Non-Reusable
251	249	4	If a QTP script has 3 actions, how many datasheets will be there in default	1	2	3	4
252	250	4	If you want to include one or more statements in every new action in your test, you can create an ………	Reusable action	split action	function	Action template
253	251	4	In the action data structure each action has its own:	Folder with a local object repository	Local data table sheet	Run settings	All of the above
254	252	4	Missing Resources Pane displays	Missing Actions	Missing Object Repository	Missing Repository Parameters	All of the above
255	253	4	The option available while deleting an action	Delete the selected call to the action	Delete the action and its calls from this test	Delete the action and its calls from all the tests	Both A&B
256	254	4	What method is used to send a runtime datasheet to a excel file located in hard drive	IMPORT	EXPORT	IMPORTSHEET	EXPORTSHEET
257	255	4	When you delete an action from a test	Action's Keyword View is Deleted	Action's Expert View is Deleted	Local Object Repository is deleted	All of the above
258	256	4	Where do you configure an action to use shared object repository?	Test Settings	Action Settings	Action Call Properties	Associate Repositories
259	257	4	Which are the highest level of test hierarchy in Keyword View?	Tests	Steps	Calls to Actions	Actions
260	258	4	Which type of action can be called from the other test?	Reusable action	Regular (non-reusable) action	External action	All of the above
261	259	1	Data table object is available in which category of step generator	Utility Objects	Test Objects	Functions	User defined objects
262	260	1	The ………. Enables you to encode your passwords and place values into the data Table	Password Encoder	Password Decoder	Password Encode	Password Decode
263	261	1	We can add test object methods, all types of functions using	Function Generator	Step Generator	Object Repository	None of the above
264	262	1	What is the purpose of SystemUtil object	Starting the AUT explicitly through script	Execute the test through script	Close the AUT	All of the above
265	263	2	_______operation or method used to check for existence of an object in a AUT	isexist	exist	isobject	isexists
266	264	2	…….. Method - Imports a sheet of a specified file to a specified sheet in the run-time data table.	SheetImport	ImportSheet	ImportDataTable	ImportTable
267	265	2	Default File extension of Function Library is	.tsr	.qfl	.lrr	.lra
268	266	2	From the given list select the options which are optional in select statement	FROM	ORDER BY	SELECT	None of the above
269	267	2	Step Generator option is available in which menu	View	Insert	Automation	Resources
270	268	2	The method used for sending information to test results is	Reporter.log()	Reporter.ReportEvent()	Reporter.Msgbox()	Reporter.Report()
271	269	2	What are the different categories in Step Generator	Utility objects, web, test objects	Utility objects, test objects, functions	test objects, functions, User defined objects	All of the above
272	270	2	What Information Pane in QTP will display	Licence Information	Syntax Errors	Logical Errors	Both A & B
273	271	2	Which field in Step Generator is optional, depending on the object and operation?	Category	Value/Argument	Step Documentation	None of the above
274	272	2	which field in the Step Generator dialog box is optional depending on the object and operation?	Category	Value/Argument	Documented steps	Only C
275	273	2	Which of the following statement is true:	You can open and work on two function libraries simultaneously.	You can open and work on multiple function libraries simultaneously.	You can open and work on nine function libraries simultaneously.	You can open and work on one function library at a time.
276	274	2	You can retrieve or modify property values of the test object during the run session by adding ……… statements in the keyword view or Expert view.	GetROProperty and SetROProperty	GetTOProperty and SetTOProperty	GetTOProperty and SetROProperty	GetROProperty and SetTOProperty
277	275	3	Data table stores values in	Global Sheet	Action sheet	Both A and B	None of the above
278	276	3	Else Statement is added in QTP	Only if the test object is stored in Object repository	Only through Expert View	Only if IF statement is used	Both B & C
279	277	3	Example of Non-recordable test object method and operation that you can generate using step generator	Click	Set	Getvisibletext	All of the above
280	278	3	Function Definition Generator is found in which menu option.	File	Tools	Insert	View
281	279	3	Functions category of Step generator displays ________functions	Built-in	Library and local script functions	Both A&B	None of the above
282	280	3	If it is importanat for you to save the resulting data from the run-time data table, you can insert a ……….. Statement to the end of your test to export the run-time data table to a file.	Export.Datatable	DataTable_Export	DataTable.Export	Both A and B
283	281	3	In order for the ElseIf to be available in the Step list, what must be done?	The object repository must be created.	Save and run the test.	The If step must exist and be highlighted.	All of the above
284	282	3	In QTP, you can define and store user defined function in a	Function Library	Directly in an action within a test	Both A & B	None
285	283	3	Reporting a Event in Test Results is	Reporter Event	Report Event	Reporter.ReportEvent	Report.ReporterEvent
286	284	3	Which of the following are used to increment in a for loop	++	Next	Step	Skip
287	285	3	You can insert …….. Statements that instruct QTP to wait until the object exists.	Exists	Wait	Both A and B	None of the above
288	286	3	You can insert Reporter object using which of the following?	Insert Menu	Step Generator	Both of the above	None of the above
289	287	4	How do we log a event status to QTP test results?	Reporter	Reporter Event	Reporter.Event	Reporter.ReportEvent
290	288	4	In addition to adding standard statement steps to your test using the keyword view, you can also insert	Checkpoint step	Output value step	Comment step	All of the above
291	289	4	In Quick Test, you can add which types of steps without recording?	Conditional Statement	Loop Statement	Report and Comment	All of the above
292	290	4	Step Generator is used	To add test objects in Repository	To add test objects to a test	To add functions to a test	All of the above
293	291	4	The command used to invoke other applications from QTP is	InvokeApplication	SystemUtil.Run	RunApp	Both A & B
294	292	4	The Concatenation Operator in VBScript	+	&	+ and &	+ or &
295	293	4	The Correct Syntax of a conditional statement starting with DO is	Do….While	Do….Until	Do….Next	Both A & B
296	294	4	The runtime property values of a test object can be found using the method(s)	GetROProperty	GetProperty	GetTOProperty	Both GetROProperty and GetTOProperty
297	295	4	To correct syntax of the condition a statement starting with Do is ……..	Do….While	Do…..Until	Do….Next	Both A and B
298	296	4	To terminate an application that is not responding we use	SystemUtil.Stop	SystemUtil.Terminate	SystemUtil.Closeprocess	SystemUtil.CloseProcessbyName
299	297	4	TRIM function in VBScript returns	A copy of a string without trailing space	A copy of a string without leading space	A copy of a string with trailing space	A copy of a string without both trailing and leading space
300	298	4	Using the Data Table Utility Object what functions you can perform	Insert sheets	Count of rows in the data table	Import a data sheet	All of the above
301	299	4	What are the different types of looping statements available in QTP?	while, do while	do until,for	Loop until	Both A&B
302	300	4	What is the shortcut key to open a step generator.	F2	F5	F6	F7
303	301	1	Local Object Repository in QTP has file extension	.mtr	.mts	.qfl	.tsr
304	302	1	Quick Test does not automatically recognize web objects during a record session. To set the environment what shoud be done?	Enable Web add-ins	install web add-ins	Both of the above	none
305	303	1	Where do we specify the maximum Time to wait for a Web Page to load.	File > Settings>Web Tab	Tools>Options>Web Tab	Resources>Settings>Webtab	None of the above
306	304	1	You can record tests on web applications in Quick Test Professional only by using	Microsoft Internet explorer	Netscape Browser	Mozilla Firefox	All of the above
307	305	2	In the Web Test Settings dialog box the browser navigation timeout is set to	50sec	60sec	20sec	40sec
308	306	3	Browser navigation timeout is in which tab of test settings ( File> Settings) window.	Properties	Resources	Web	Web Settings
309	307	3	In which dialog box do you check Web to load the add-in for a web application?	Options	Test Settings	Add-In Manager	Object Repository
310	308	3	The default global web synchronization timeout is	20000 ms	40000 ms	60000 ms	80000 ms
311	309	3	The purpose of Creating Text Checkpoint on a Web application	To check text object properties of web application	To check the contents of database	To check if a text string appears at the appropriate position on a webpage	Both A&B
312	310	4	Some examples of Web objects are	Hyperlinks	images	frames	all of the above
313	311	4	What was one application usage difference in the Web AUT as compared to the Windows AUT?	More screens	More steps to complete a manual test for a new order	Different login processes	All of the above
314	312	4	While setting record and run settings for web applications which are the two options available in Quick Test?	Record and run test on any open browser	Open the following address when a record or run session begins	Record and run on these applications	Both A and B
315	313	2	The method used to open the specified URL in a browser is	SystemUtil.Run	Navigate()	NavigateURL()	OpenURL()
316	314	3	The method used to get data from HTML table is:	GetData(Row,Col)	GetRowValue(Rowid,Col)	GetCellData(Row,Col)	None of the above
317	315	1	………. Tab enables you to view the current value of any variable or VBScript expression,	Watch	View	Locate	Current
318	316	1	………… Runs only the current line of the script, when the current line calls a method is performed in its entirety, but is not displayed In the view.	Step over	Step out	Step Into	Step Till
319	317	1	Shortcut key to Insert/ Remove a breakpoint is	F9	F8	Ctrl+b	Shift+b
320	318	1	To detect and isolate defects in a test or function library you can control the run session using	Pause	Run	F12	Session
321	319	2	The …… tab displays the current value of all variables that have been recognized upto the ast step performed in the run session.	View	Variables	Locate	Current
322	320	2	The Information pane provides a list of ……. In the test	Semantic errors	Syntax Errors	Common errors	Logic errors
323	321	2	what is the functionality of break points	Temporarily suspends a test	Stops a test run at a specific step in the test	Stops the test permanently	All of the above
324	322	3	……… runs only the current line of the script, If the current line calls a method, the method is displayed in the view but not performed. ………… Runs only the current line of the script, when the current line calls a method is performed in its entirety, but is not displayed In the view.	Step over	Step out	Step Into	Step Till
325	323	3	Steps in creating a custom checkpoint	Use the outcome values of at least two columns and perform calculation on these values	Store the outcome of the calculation in a new parameter	Both of the above	Only A
326	324	3	Tabes in Debug viewer pane are:	Watch, Variable, Debug	Watch, Data, Command	Watch, Variable, Command	View, Variable, Command
327	325	3	When a test or function library run stops at a breakpoint, which is used to check and modify the values of VBScript object and variables?	Debug Window	Debug Dialog	Debug Viewer	Debug Page
328	326	3	Which command is used to begin a debug session at a specific point in your test?	Start from Step	Run to Step	Run from Step	Start to Step
329	327	4	Custom Checkpoint is used to	Verify dynamic values in the test using output parameters	Validate a test outcome as acceptable or unacceptable by using conditional statement	Add a Report Event to report if the test outcome is acceptable	A,B &C
330	328	4	which are the options available in the Debug Toolbar	Step over	Pause	Stepout	All of the above
331	329	1	In SQL _______ operator is used to search for a string that matches a string pattern containing the % wild card character Ex:- 'S%'	LIKE	BETWEEN	=	AND
332	330	1	The data is updated in the database when a record is inserted,updated, or deleted in the AUT. This process is also known as	Data Persistence	Data Updation	Both A and B	None of the above
333	331	1	What is the extension of SQL query file that you save while creating database checkpoint	.dqy	.qfl	.mts	.qrs
334	332	1	What is the full form of ODBC	Open Database connectivity	Our Database connectivity	Open Data Connections	None
335	333	1	Which property returns the design time datatable, which enables you to modify the data that is used for the datatable parameters in your test?	Datatable	DesignTable	Design_Table	None
336	334	2	In Test Settings -> Run the Datatable iteration option is for which data sheet?	Local	Global	Design time Datatable	Run time Datatable
337	335	2	Which method for the Datatable utility object will allow you to retrieve information from the datatable during the test run	IMPORT	VALUE	GETCELL	GETROW
338	336	2	While inserting Database checkpoint to view/verify the most recent data first in a result set, specify the sort order as	Ascending	Descending	Left Ascending	Right Descending
339	337	2	You can connect to database using which connectivity in database checkpoint	ADODB	ODBC	We can not connect to database form QTP	Only A
340	338	3	How can you write query in Database Query wizard in QTP	Using Microsoft Query	Using SQL statement manually	Both A and B	Using Oracle
341	339	4	Properties of database checkpoints are	Source	Rowcount	Dbuniqueid	All of the above
342	340	4	SQL statements enable you to	Retrieve data from a database	Insert new records into a database	Update records in a database	All of the above
343	341	4	The default properties of database checkpoint are	Source, Connection string	Value, Attachedtext	Rows count, DBuniqueID	Both A&C
344	342	4	To create a database checkpoints	Must have MS Query install for wizard	Must have a DSN setup to select DB	Wizard specifies tables/columns to be checked	All of the above
345	343	4	What does the source property of a database test object specify?	RowsCount	Table Name	Field Name	SQL Query
346	344	4	Which are the clauses associated with the SELECT statements	SELECT	FROM	DELETE	Both A and B
347	345	4	which of the below mentioned points are related to the database checkpoint during execution.	The Test arrives at the database checkpoint step and connects to the database	QuickTest sends a query to the database to retrieve the actual data	QuickTest gathers the result set of the query, which provides the actual data	All of the above
348	346	1	If an object is contained in both local and shared repositories then, during a run session.	QTP will use the object in the local object repository.	QTP will use the object in shared object repository	There will be a conflict	QTP will use descriptive programming
349	347	1	when you associate a shared object repository with a new action, the objects in the shared object repository appear in the	object Repository	Actions	Test	All of the above
350	348	1	When you copy an object to the local object repository	Its parent object also get copied to the local object repository	Its parent object are not copied to the local object repository	You have to manually copy the parent objects and store if require	Copy is not possible; you have to manually drag and drop parent objects to local repository
351	349	1	which are the two types of object repositories available in QTP	Shared and Local	Shared and Peraction	Global and Local	None of the above
352	350	1	Which object repository test objects are associated with a specific action and no other actions will have access to these objects	Local	Shared	Both A&B	Merge object repository
353	351	1	You open the Object Repository window for aspecific component by choosing…….	Resources->object repository	Tools>Object Repository	File> Object Repository	Help> Object Repository
354	352	2	In QTP 9.2 we can load for a script	One Local Repository and one Shared Repository	One Local Repository and multiple Shared Repositories	Multiple Local Repositories and One Shared Repository	Multiple Local Repositories and Multiple Shared Repositories
355	353	2	In QTP 9.2, Test objects can be stored in two types of object repositories……	Shared object Repository and Per action object repository	Shared object repository and local object repository	Shared object repository and Action object repository	Both A anc C
356	354	2	Shared Object Repository best suites when you	Create single- action tests	Work on multiple tests that have some common objects	Do not expect to frequently modify the test object properties in the application	Have very few tests that correspond to a given application interface or set of objects
357	355	2	What Object Repository type can you create using Object Repository Manager?	Local Repository	Shared Repository	Both	None
358	356	2	When we change the logical name of a object in Object Repository will it be reflected in Attached Text property	Yes	No	Some times	Can not Judge
359	357	2	You can add objects to a shred object repository by using	Object repository	Object Repository manager	Resource Manager	Actions
360	358	3	When you modify the name of an object in the local object repository, the name is automatically updated in …….for all occurrences pf the object.	In the Keyword View	In the Expert View	Both A and B	None of the above
361	359	3	You added some properties in Object Repository for a test Object. If you update the object using update form application feature--	Added properties will also be updated	Only default properties will be updated except Added properties	It recaptures default object properties from AUT and added properties will not be displayed	None of the above
362	360	4	In the Object Repository Manager you can	Create a shared object repository	Associate object repositories to actions	Add objects to a shared object repository	All of the above
363	361	4	In the Object Repository Window:	Local Objects are Editable	Shared Objects are in Read only Format	Loca Objects are in Read Only Format	Both A & B
364	362	4	Shared Object Repository in QTP has file extension	.mtr	.mts	.qfl	.tsr
365	363	4	Using Object Repository Manager you can	Create a shared object repository	Open Shared object repository for editing	Add or define objects into Shared object repository	Merge, compare Shared object repository including above features
366	364	4	Which of the following is created, by default with a new action?	Local object repository	Local data sheet	Global data sheet	A and B
367	365	4	You can associate shared object repositories with …….actions simultaneously, using the associate Repositories dialog box	Seven	Two	Three	Multiple
368	366	1	An application may contain objects that behave like standard objects but are not recognized by quick test you can define these object as	Virtual Objects	Customized Objects	Both A and B	Simple Object
369	367	1	To record mouse clicks, cursor movement, and keyboard input relative to the entire desktop which of option of analog recording need to be selected	Record Relative to the Screen	Record Relative to the following window	Record Relative to the system	None of the above
370	368	1	what is the short cut key for Analog Recording	Shift+Alt+F3	Ctrl+Shift+F3	Ctrl+Alt+F4	None of the above
371	369	1	where will you set the option to disable virtual object identification	Tools-> options->general	Tools->options->run	Tools->view options->general	file->settings->general
372	370	1	Which is the default recording mode in QTP	Context Sensitive	Analog mode	Lowlevel mode	None of the above
373	371	2	Extention of virtual object collection files	.vcf	.vot	.vct	.vcd
374	372	2	Quick Test identifies a virtual object according to its ……..	Properties	Boundaries	Object Spy	Edges
375	373	2	The statement that calls the recorded analog file is	ExecuteAnalog	RunAnalog	CallAnalog	CopyAnalog
376	374	2	Use low-level recording mode,when you want to Record.	Mouse movements	when an object is not recognized by Qtp	mouse Actions	None of the Above
377	375	2	What is the default Recording mode in QTP	Context-Sensitive Recording	Standard Recording	Analog Recording	Default Recording
378	376	2	what is the short cut key for Low Level Recording	Shift+Alt+F3	Ctrl+Shift+F3	Ctrl+Alt+F4	Both A and B
379	377	3	The ………contains all the virtual object collections defined on your computer.	Virtual Objects Manager	Virtual Manager	Virtual Object Manager	Virtual Object Wizard
380	378	3	Virtual objects are stored in which folder of QTP?	Action0 folder	Action1 Folder	Dat folder in QTP installation	Result folder
381	379	3	which are the two run modes in QTP	Context Sensitive and Normal	Normal and Analog	Normal and Fast	Fast and Lowlevel
382	380	4	Analog Recording depends on	window coordinates	desktop coordinates	fonts	All of the above
383	381	4	Bitmap Checkpoints are sensitive to	Changes in Image Properties	Image Size	Screen Resolution	All of the above
384	382	4	During Analog Recording, QTP	QTP stores recorded object properties in Object Repository	QTP stores mouse tracking events in Object Repository	QTP stores recorded object properties in test folder	QTP stores mouse tracking events in test folder
385	383	4	Quick Test does not recognize virtual objects during	Analog recording	Low level recording	Context Sensitive	Only A and B
386	384	4	Quick test does not support virtual objects for ……..recording.	Analog	Low-level	Normal	Both A and B
387	385	1	A ……… is a convenient way to organize and store multiple recovery scenarios together.	Recovery File	Recovery Folder	Recovery Log	Log File
388	386	1	Post recovery test run options specify	How to continue the run session after QTP identifies the exception	Errors while running	recovery scenario during a run session	All of the above
389	387	1	The recovery operations screen in Recovery secnario Wizard enables you to manage the collection of …….in the recovery scenario.	Recovery Operations	Recovery files	Trigger Events	All of the above
390	388	1	What can be used to handle unpredictable exceptions?	Recovery Scenario Manager	Exception Manager	Select Case Statement	All of the above
391	389	1	Which object repository type does QTP stores information about object automatically during a run session?	Local Repository	Shared Repository	Both	None
392	390	2	when you save recovery scenario it will be saved with which extention	.xls	.qrs	.qrc	.tsr
393	391	2	While executing a test if there is any mismatch in the property of the object which option you select	Pop Up window	Object State	Test Run error	Application Crash
394	392	3	Recovery scenarios activate specific recovery operations when ……occur.	Specific Errors	Test Errors	Trigger Events	QTP Errors
395	393	3	Using Option Explicit Statement	Handles Exceptions automatically	Explicit declaration of variables is optional	Forces Explicit declaration of variables	Enables Optional Step
396	394	3	Which of the available recovery scenario options must be configured before the system can recognize that a problem exists?	The record and run settings	The recovery operation	The event trigger	None
397	395	3	while executing a test if you get error from QTP tool which option you select to handle this	Pop Up window	Object State	Test Run error	Application Crash
398	396	4	Which of the following is false about the recovery scenario	Trigger	Recovery	Post Recovery	Pre Recovery
399	397	1	The method used to continue test execution after getting run-time error is	On Error Resume Next	On Error Proceed Next	On Error Raise Next	On Error Next
400	398	1	Filtering options in merging Object repository contains the options?	All objects and All objects with conflicts in Object Description	All objects and Few objects with conflicts in object description	Only objects with conflicts	None of the above
401	399	3	You can use the Object repository merge tool to merge objects from………	Two shared object repositories into a single shared object repository	The local object repository of one or more actions or components in to a shared object repository.	Both A and B	None of the above
402	400	2	When a test is run in Update mode, what is updated	Test Results	Object Description	Logical Name of the Object	Application Name
403	401	3	which are the options available in Ordinal Identifiers	Location	Index	Both of the above	None of the above
404	402	4	Environments that Object Identification dialog contains by default	Activex	Standard Windows	Web and Visual basic	All of the above
405
406
407
408
409	Q.No	Correct Answer	Question	Option1	Option2	Option3	Option4
410	1	1	ACTIVE SCREEN offers a visual representation of each test step. You can make changes to the test script directly from Active Screen without connecting to the AUT	TRUE	FALSE
411	2	1	By default Quick Test assumes the value that is generated within the application under test as a constant value or expected value	TRUE	FALSE
412	3	1	Functional testing to verify whether or not the AUT successfully completes a transaction	TRUE	FALSE
413	4	2	Mainframe applications cannot be tested through QTP	TRUE	FALSE
414	5	1	QTP is capable of writing user actions as documentation on its own	TRUE	FALSE
415	6	2	QTP scripts are always case sensitive	TRUE	FALSE
416	7	2	Scripts created in QTP will work only if we record	TRUE	FALSE
417	8	1	VBS can be embedded in QTP Scripts	TRUE	FALSE
418	9	1	You can specify the order In which the columns are displayed in the keyword view.	TRUE	FALSE
419	10	2	It is imposible to compress the file while saving QTP Test	TRUE	FALSE	Not sure	None of the above
420	11	1	Quick Test result window has got two panes, the right pane displays the Result summary and Left pane displays the Test summary tree	TRUE	FALSE	Not sure	None of the above
421	12	1	QuickTest should be running before the application under test is invoked because QuickTest uses internal hooks to recognize user actions on the application under test	TRUE	FALSE
422	13	2	QuickTest verifies only visible properties of the application at runtime	TRUE	FALSE
423	14	1	To run the test in normal mode debugger should be installed with QTP	TRUE	FALSE
424	15	1	You can use Microsoft excel to type and save a formula to the Default.xls file in the quickTest test directory	TRUE	FALSE
425	16	1	For each object and method in an Expert View statement, a corresponding row exists in the Keyword View.	TRUE	FALSE	There is a problem with the statement	None of the above
426	17	1	You can work on one or several function libraries at the same time.	TRUE	FALSE
427	18	1	A QTP user can increase or decrease the active screen information saved with the test.	TRUE	FALSE
428	19	1	Panes in QTP can have one of the following states- docked or floating	TRUE	FALSE
429	20	1	When we switch from Expert view to the keyword view, QTP automatically checks for syntax errors in the test and shows them in the information pane.	TRUE	FALSE
430	21	1	If the information pane is not open, QTP automatically opens it in case a syntax error is detected.	TRUE	FALSE
431	22	2	QTP processes a comments when it runs a test.	TRUE	FALSE
432	23	1	By default the bottom right part of the Test result window displays information on the selected checkpoint only if it has a status failed.	TRUE	FALSE
433	24	2	Installing and loading an Add-In is one and the same thing.	TRUE	FALSE
434	25	2	To maximize performance and object identification reliability, load all the add-ins	TRUE	FALSE
435	26	2	Changing the logical name of a recorded object will affect object identification at run-time	TRUE	FALSE
436	27	1	Every action in QTP has its own object repository associated in default	TRUE	FALSE
437	28	2	Every Script in QTP has only one local object repository irrespective of number of actions associated with that script	TRUE	FALSE
438	29	2	We cannot able to delete objects from Object Repository after recording	TRUE	FALSE
439	30	1	We cannot able to delete objects from Object Repository during recording	TRUE	FALSE
440	31	1	For tests, you can also view test object properties and property values for objects in the active screen, regardless of whether the objects are stored in the object repository.	TRUE	FALSE
441	32	1	The object properties window differes for objects stored in shared and local object repository.	TRUE	FALSE
442	33	1	You can rename objects in the shared object repository using the object repository manager.	TRUE	FALSE
443	34	1	At the time if copying, pasting and moving bojects, you can not move an object to any of its descendants	TRUE	FALSE
444	35	2	When you remove a step from test, its corresponding object is also removed from the repository.	TRUE	FALSE
445	36	2	You can use find and replace dialog box to replace property of object names.	TRUE	FALSE
446	37	1	Synchronization is used to instruct QuickTest to wait for the application process to complete before proceeding to the next step in the test	TRUE	FALSE	Not sure	none
447	38	2	Synchronization points can also be added through active screen after recording	TRUE	FALSE
448	39	1	A Checkpoint can verify one or more values	TRUE	FALSE
449	40	1	A Checkpoint statement includes synchronization timeout in default. No need to explicitly synchronize for a checkpoint statement	TRUE	FALSE
450	41	2	Standard Checkpoints can be added to the script only during recording	TRUE	FALSE
451	42	1	Using Standard Checkpoint you can check more than one properties at a time	TRUE	FALSE
452	43	1	In Keyword view , you can also view properties for items such as checkpoints.	TRUE	FALSE
453	44	2	You can not modify the settings of existing chcekpoints.	TRUE	FALSE
454	45	1	Regular expressions enable Quick Test to identify objects and text strings with undependable values.	TRUE	FALSE
455	46	2	You can use regular expression only for the values of type string and number.	TRUE	FALSE
456	47	2	If you expect the values of a property to change in an unpredictable way during each run session, you can use regular expressions.	TRUE	FALSE
457	48	1	Regular expressions can also be used with XML checkpoints.	TRUE	FALSE
458	49	1	Output value is used for reading the dynamic value that appears in a object at runtime	TRUE	FALSE
459	50	1	We can able to set expected values to the script at runtine through datatable	TRUE	FALSE
460	51	1	We can able to store runtime datatable at any location of the harddrive without using EXPORT method	TRUE	FALSE
461	52	1	The active screen enables you to Parameterize object values and insert checkpoints	TRUE	FALSE
462	53	2	The Data Table does not assists you in parameterizing your test	TRUE	FALSE
463	54	1	You can edit information in the data table by typing directly in to the table cells	TRUE	FALSE
464	55	1	The sheet you import automatically takes the name of the sheet it replaces.	TRUE	FALSE
465	56	2	The use of complex and/or nested formulas in the Data Table is supported.	TRUE	FALSE
466	57	1	During the run session, QuickTest creates a ..Data Table--- a live version of the data table associated with your test.	TRUE	FALSE
467	58	1	When you parameterized a step in a test using the data table, you must decide whether you want to make it a global data table parameter or an action data table parameter.	TRUE	FALSE
468	59	1	After running a parameterized test, you can view the actual values taken from the data table in the test results Runtime data table.	TRUE	FALSE
469	60	1	The Data Table assists you in parameterizing your test.	TRUE	FALSE
470	61	2	There are four types of parameters: Test/Action, Random number, Environment Variable, Regular Expression	TRUE	FALSE
471	62	1	By outputing values to the global data table sheet from one action and using them as input parameters in another action, you can easily pass values from one action to another.	TRUE	FALSE
472	63	2	Random number parameters are appropriate for non numeric values, such as text or hypertext links	TRUE	FALSE
473	64	1	Action called using "Insert Call to Existing…" will be read-only in the calling script	TRUE	FALSE
474	65	2	Action copied using "Insert Call to Copy…" will be read-only in the calling script	TRUE	FALSE
475	66	2	Actions cannot be nested during recording	TRUE	FALSE
476	67	1	Actions iterations are in default set to "Run on all Rows"	TRUE	FALSE
477	68	1	All Actions in a Test Script uses its Local Object Repository in Default	TRUE	FALSE
478	69	1	All External Actions are Reusable Actions	TRUE	FALSE
479	70	2	All Reusable Actions are External Actions	TRUE	FALSE
480	71	2	Copy to an Existing action can be performed only if the action is reusable	TRUE	FALSE
481	72	2	In QTP 9.2, actions are reusable in default	TRUE	FALSE
482	73	1	Reusable actions and External actions both are same provided External actions are used in external scripts	TRUE	FALSE
483	74	2	Values in Action Datatable can be used in all independent actions in the test	TRUE	FALSE
484	75	1	Values in Global Datatable can be used in all independent actions in the test	TRUE	FALSE
485	76	1	Values in the global data sheet can be used in any action in the test. When you run the test, the complete test runs once for each row of data in the global data sheet.	TRUE	FALSE
486	77	1	You can copy and paste or drag and drop actions to move them to a different location within a test	TRUE	FALSE
487	78	2	When you remove an external action, you remove all calls and the action from the action list. The original action is alos affected.	TRUE	FALSE
488	79	1	You can insert additional steps on the test objects captured in the active screen after the recording session.	TRUE	FALSE
489	80	2	SetTOProperty changes the property values used to identify an object during the test run. It also effects the values saved in the object Repository for the object.	TRUE	FALSE
490	81	1	GetTOProperty method returns the value of a specified property for a test object from the object repository.	TRUE	FALSE
491	82	1	We can apply Text Checkpoints to a web applications	TRUE	FALSE	can't say	None of the above
492	83	2	You can run the test on web applications in QTP only by using Microsoft Internet Explorer	TRUE	FALSE
493	84	1	The Web Tab is availabe only when Web support is Installed and loaded.	TRUE	FALSE
494	85	2	You can not manage some aspects of a local object repository using the QTP Object Repository automation object model.	TRUE	FALSE
495	86	1	For each action, you can use a combination of objects from your local and shared object repositories.	TRUE	FALSE
496	87	2	If a child object is added to a local object repository, and its parents are in a shared object repository, then you have to manually drag and drop its parent object from shared object repository to local object repository	TRUE	FALSE
497	88	1	You can open any function library, regardles of whether it is associated with the currently open test.	TRUE	FALSE
498	89	1	You can print the contents of the keyword view to your windows default printer (and even preview the contents prior to printing)	TRUE	FALSE
499	90	2	In Analog recording mode, Quick Test records object properties in the object repository. Because the recording is done at object level	TRUE	FALSE
500	91	1	QTP captures active screen images when recording in Analog mode	TRUE	FALSE
501	92	1	You cannot use the Object Spy feature to recognize Virtual objects	TRUE	FALSE
502	93	2	Virtual objects enables you to record and run tests on objects that are normally recognized by Quick Test.	TRUE	FALSE
503	94	1	In the test results, the virtual object is displayed as though it is in a standard class object	TRUE	FALSE
504	95	2	You can view the object SPY to view virtual object Properties.	TRUE	FALSE
505	96	1	You can not insert any type of check point on a virtual object	TRUE	FALSE
506	97	1	Whenever you open a test or a function libarary, QTP automatically checks for the availibility of specified resources.	TRUE	FALSE
507	98	1	By default, recovery scenario operations are activated only after a step returns an error.	TRUE	FALSE
508	99	1	Each Recovery secnario is represented by an icon that indicates its type	TRUE	FALSE


1
2	Q.No	Question Type	Correct Answer	Question	Option1	option2	option3	Option4	Topic

3	1	M	1	With Mercury Quality Center, you can	Standardize and manage the entire quality process	Improve application quality and reliability	Improve Automation process	None	Introduction
4	2	M	1	Design of test cases in QC is done at which module	Test Plan	Test lab	Requirements	Dashboard	Test Planning
5	3	M	3	Default format of execution report will be:	word doc	excel sheet	html format	CSV	Test Execution
6	4	M	4	Quality Center testing process includes	Specifying Requirements	Planning Tests	Running Tests and Tracking Defects	All above	Introduction
7	5	M	3	Requirement Specifying Phase involve	Define Testing Scope	Designing Test cases	Create Requirements,	Creating Testing tasks	Defining Test Requirement
8	6	M	4	Test Planning Phase involves	Define Testing Strategy	Define Test Subjects	Define Tests and Requirements coverage	All above	Test Planning
9	7	M	2	Running of Tests is done in which of the following module	Test Plan	Test Lab	Dashboard	Defect module	Test Execution
10	8	M	1	Dash Board enables us to:	teams to track application readiness in real-time and manage project risk.	Manage test Requirements	Define test Strategy	Raise defects	Introduction
11	9	M	2	user can change password from	Test lab button	Tools menu	Filter button	Test Plan	Introduction
12	10	M	3	Follow up alerts can be created on out standing issues in which module	Test Lab	Requirements	Defect	Test Plan	Defect Tracking
13	11	M	1	Defect with status "Not Closed" can be viewed in which module	Defect Module	Test Plan	Test Lab	Dashboard	Defect Tracking
14	12	M	1	Assigning tasks to testers is done at which Phase of QC Testing process	Planning Tests	Running phase	Specifying Requirements	Generating Reports	Test Planning
15	13	M	3	Roles That can be assigned to any Quality center9.0 user are	Site admin	Proj admin	Both A & B	Error manager	Introduction
16	14	M	4	Site Admin can do which of the Following	Assigning users to projects	Creating Quality Center projects	Storing Project data in Project database	All the above	Introduction
17	15	M	2	Details about designer, status, and the creation date for each test case that is created will be in which Module	Test Lab	Test Plan	Dashboard	Defects	Test Planning
18	16	M	1	If test Type is referred as WR-AUTOMATED what does it mean	A Win runner Test	Test Case for Windows OS	A Manual Test	No such option in QC	Test Planning
19	17	M	3	Under which Tab of Test lab module a user can add his comments about his Test set	Execution Grid	ExceutionFlow	Test Set properties	Linked defects	Test Execution
20	18	M	2	The Main Purpose of Execution Grid in Test lab module is:	To manage Defects raised	To manage test execution and Test results	To generate Test Report	None	Test Execution
21	19	M	4	Which of the operations can be done from Requirement Module	Add test coverage for the requirement	Add defect links for the requirement.	Add New Child Requirement to the requirement tree.	All the above	Defining Test Requirement
22	20	M	3	Under Requirement coverage chart, Yellow color indicates	Pass	Skipped	No run	Failed	Defining Test Requirement
23	21	M	1	What are the operations that can be done by using defect module	Adding a New Defects	Defects cannot be raised in QC	updating of defect is not possible	Defect status cannot be changed	Defect Tracking
24	22	M	4	Quality Center's support for manual tests includes	template tests	parameters	ability to call other manual tests	All the above	Test Planning
25	23	M	1	Purpose of Traceability Matrix	documenting the requirements identified in the project plan	Defects are seamlessly integrated	Allows smooth information flow between various testing stages	incorporates all aspects of the testing aspects	Defining Test Requirement
26	24	M	2	What Forms the Basis for Test Plan Tree	Test cases	Requirements	Test sets	Test Plan	Test Planning
27	25	M	3	How many subfolders or entries you can create in each folder.	525	676	No limit	250	Introduction
28	26	M	3	Quality Center generates traceability alerts for the following	to track application readiness in real-time	When Tests are not added to test set	When a Requirement changes and it has associated tests	When all the requirements are covered	Defining Test Requirement
29	27	M	1	Creation of test plan requires to keep one of the following point in mind	Divide your application into modules or functions to be tested	Schedule test execution and assign tasks to application testers	Correct the defects that needs to be fixed	Examine the application documentation to determine your testing scope	Test Planning
30	28	M	2	Test Steps are designed after	Requirements are captured	Once tests are added to test plan	before raising defects	while assigning tasks	Test Planning
31	29	M	4	A test set is the logical grouping of	Test plan	Requirements	Test steps	tests that should be run as a group	Test Execution
32	30	M	3	When a Defect is Repaired its status is	verified	repaired	Fixed	Open	Defect Tracking
33	31	M	2	Which module enables to divide application according to functionality	Requirements	test plan	Test lab	Dashboard	Test Planning
34	32	M	1	Which of the defect status is not available in QC by default	Verify	New	Open	Fixed	Defect Tracking
35	33	M	1	What type of Test Management Tool is QC?	Web based	Windows based	Client Server based	All of the above	Introduction
36	34	M	2	What is release?	Line of business	Version of an application	group changes in application	distribution	Working with releases
37	35	M	1	How many core modules are present in QC?	Five	Seven	three	Four	Introduction
38	36	M	2	Which part of the screen is the common tool bar located?	Upper left corner of the window	Upper right corner of the window	Bottom right corner of the window	None of the above	Introduction
39	37	M	1	What is the first phase of the test management process using QC9.2?	Define Releases	Define Requirements	Develop test plan	Execute tests	Introduction
40	38	M	4	What are the tools for creating a release tree?	New Release folder	New Release	New Cycle	All of the above	Working with releases
41	39	M	4	What are the fields in Cycle detail screen?	Name	Start Date and End Date	Brief description of the cycle	All of the above	Working with releases
42	40	M	4	What are the type of attachments QC supports?	File and URL	Snap Shot and System properties with clip board image	excel sheet	All of the above	Working with releases
43	41	M	2	Which view in Requirement Module are you able to analyze coverage calculation by cycle?	Filtering requirement by cycle	View coverage by cycle	Requirement Review by Cycle	None of the above	Defining Test Requirement
44	42	M	1	If you tie a requirement to a cycle whether it affects all the cycles?	requirements in the specific cycle	requirements in all the cycles	coverage view cycle	Module view cycle	Defining Test Requirement
45	43	M	3	what should be the characteristics of a requirement?	Unique and Precise	Bounded and Testable	Both a and b	None of the above	Defining Test Requirement
46	44	M	1	What is the direct cover status?	execution status of the tests that are linked to requirement	execution status of the test that is linked to Test Plan	Execution status of the test that is link to Test coverage	Execution status of Defect	Defining Test Requirement
47	45	M	3	What is a fixed column?	To set non Scrolling Rows	To select non-scrolling columns	specify the number of non-scrolling columns you want to set in	None of the above	Defining Test Requirement
48	46	M	1	What is the purpose of the requirement traceability?	define a link between multiple requirements	define a link between requirement and defect	define a link between requirement and Test case	None of the above	Defining Test Requirement
49	47	M	4	What is the different Criterions of business Criticality?	Critical	Important	Nice to have	All of the above	Analyze Requirement Risks
50	48	M	3	When do you allocate testing time for requirements?	After finding business criticality	After finding Failure Probability	Both a and b	None of the above	Analyze Requirement Risks
51	49	M	3	What should be the characteristics when you create a tests?	Accurate and Economical	Consistent and Appropriate and Traceable	Both a and b	Ambiguous and difficult	Test Planning
52	50	M	4	What are the different types of functional testing tools that QC supports?	WR-AUTOMATED	QUICKTEST_TEST	LR-SCENARIO	Both a and b	Test Planning
53	51	M	1	What is the Use of template test?	to reuse a test design across different tests	to reuse a test plan	reuse a test execution	reuse tests in different projects	Test Planning
54	52	M	4	When do you assign values to parameters?	During calling the test	After calling the test->right click->called test parameters	During test execution	All of the above	Test Planning
55	53	M	2	What is Live analysis Graph?	Visual Overview of all the test in Requirement Module	Visual overview of all the test within a folder in test plan tree	Visual Overview in Defects Gird	All of the above	Test Planning
56	54	M	1	What is a test set?	test set is a group of test designed to achieve specific testing goals	Collection of test steps	Organizing tests into Defects Module	Both a and C	Test Execution
57	55	T	1	Test set can contain a combination of manual and automated tests	TRUE	FALSE			Test Execution
58	56	M	3	What is the highest level folder in a Test Lab?	Unattached folder	Subject folder	Root folder	Execution folder	Test Execution
59	57	M	4	what are the two types of execution condition in execution flow?	Finished and passed	Passed and failed	Finished and completed	None of the above	Test Execution
60	58	M	4	How do you run test concurrently?	multiple remote hosts	add multiple instances of the test	test set	All of the above	Test Execution
61	59	M	4	How many views does the defect Module have?	Seven Views in the defect tool bar	Two Views-> details and tree	Public and private view -- two	Two views->grid and details view	Defect Tracking
62	60	M	3	what are the different types of graphs supported by QC?	Summary, Progress Trend	Requirements coverage and Defects Age	Both a and b	None of the above	Reporting
63	61	M	4	what is the database used in QC?	Oracle	SQLServer	Ms-Access	Both a and b	Introduction
64	62	M	1	When you assign a requirement to release is it tested in all cycles within the release?	Yes it tied to all cycles	tied to all test modules	tied to Defect Module	None of the above	Defining Test Requirement
65	63	M	1	How do we login to QC 9.2?	Authenticate	Quality center	add ins	All of the above	Introduction
66	64	M	1	What is a private view?	Private Views are accessible only to the user who created them	Private Views are accessible to all the users of that project	We can't create Private Views in QC	None of the above	Reporting
67	65	M	1	What is the foundation for the Release Module?	Creation of Release tree	Creation of Requirement folder	Creation of a Cycle	All of the above	Working with releases
68	66	M	3	Different types of attachments available in Requirements module are:	File and URL	Snap Shot and System info	Both a and b	None of the above	Defining Test Requirement
69	67	M	1	What does the solid blue line indicates in the Execution flow tab?	It indicates the test is to be executed only if the previous test execution status is Finished.	It indicates the test is to be executed only if the previous test execution status is Passed.	It indicates test is to be executed only when previous test execution failed.	It indicates test is already executed and passed	Test Execution
70	68	M	4	What is the defect requirement relationship?	requirements have been met	associated with multiple defects	status of the defect to determine the requirements	All of the above	Defect Tracking
71	69	M	4	What type of data can be exported from an excel to quality Center?	Requirements	Test Plan	Defects	All of the above	Reporting
72	70	M	1	While executing a manual test case you realize that a step is missing from the test. This is a critical step and you would like to have it documented in the test run. What is the best solution for this situation?	click on the add step button in the Manual runner	Make a note of it and add the step in the design steps tab in the Test Plan steps can only be added there	Edit the results from the Test run properties window after the test run	Execution status of the Test run properties	Test Execution
73	71	M	2	When determining the order for running tests in a Test Set QC first checks the	Execution Grid	Execution Flow	Test set tree	Quality Center runs the tests according to the specified order, grouped by host type	Test Execution
74	72	M	1	choose statement that accurately describe functionality pertaining to Automated test execution	Automated tests will be executed without user intervention at the time set in the planned exec time	Automated test must be executed in separate test set from manual test	Both A&B	Automated tests will be executed with user intervention.	Test Execution
75	73	M	3	In Which Document Generator page you can specify the tests from the test Grid that should appear in the Project document?	Subject lists	Test sets	Test Lists	template tests	Reporting
76	74	M	3	Which statement accurately describes functionality of the Requirements module?	each requirement can have only one associated defect	The Direct Cover status is related only to the last run of the associated tests	Parent requirements exists for the structure and organization of the specific requirements and cannot be associated with tests	You can only send one requirement per email message	Defining Test Requirement
77	75	M	3	The Document Generator allows for the export of Quality Center data into what formats	PDF and word	Word and Excel	Word	Word and HTML	Reporting
78	76	M	4	Choose the statement that accurately describe functionality of the test plan	Test sets can be created from Test Plan	Tests can be associated with Multiple defects	Test folders can be arranged in any Order	Both a and b	Test Planning
79	77	M	4	Which statements accurately describe functionality of the Execution flow tab?	Dependencies between tests can be created by dragging a line from one test name to another test	you can run manual tests from the execution with Manual runner or the execution box	You can schedule the test run date and time by clicking the time dependency icon	All of the above	Test Execution
80	78	M	1	Which tab of the test plan is used to define the basic information about the test?	details	Design steps	test Script	Attachments	Test Planning
81	79	M	3	Where can the links between requirements and test cases be defined within Quality Center?	The Test lab and Test Plan Module	Test lab Module	The requirements and Test Plan Module	The requirements and Test lab Modules	Test Planning
82	80	M	3	How can you update the value of a Test parameter?	Right click on the calling step and select Test parameters	Double click on the calling step	right click on the calling step and select Called Test parameters	Test parameters can be updated only from the original tests	Test Planning
83	81	M	2	What would you consider to be your yardstick for measuring the progress of your project and the final arbiter of its successful completion?	Test cases	Defects	Test sets	Requirements	Defect Tracking
84	82	M	1	A defect can be associated with how many tests	One	unlimited	equal to the number of requirements associated with tests	Ninety Nine	Defect Tracking
85	83	M	4	Which requirements view enables you to evaluate the breakdown of coverage according to test coverage status?	Document View	Coverage View	Requirement View	Coverage Analysis View	Defining Test Requirement
86	84	M	4	Which of the following are valid requirements names choose three?	Secure()Purchase	Booking/Reservations	%Travel+Preferences	All of the above	Defining Test Requirement
87	85	M	3	Which tests allows you to create script using Vbscript, Jscript, Python Script and to integrate these scripts into your testing?	QUICKTEST_TEST	WR-AUTOMATED	VAPI-XP-TEST	ALT-SCENARIO	Test Planning
88	86	M	4	Which test type can be set as Template test?	WinRunner test	Load Runner test	Visual API-XP test	Manual test	Test Planning
89	87	M	2	Graph data can be exported from bar chart tab to which of these formats	HTML, CSV,WORD,TEXT	HTML,Text,Excel	PDF, Rich Text Format, Text and Excel	PDF, Word and excel	Reporting
90	88	M	3	When defining the Test Run Properties for a test in a test set where can you set parameter values and other options for an automated tests	Details	Execution flow	Run Events	Configuration	Test Execution
91	89	M	4	What value type should you assign to a defect to mark the stages of its life cycle?	Milestones	Severity levels	Priority levels	status	Defect Tracking
92	90	M	2	What feature allows you to view the complete history of test runs in a Test Set?	Run events	Run History	Execution log	All runs	Test Execution
93	91	M	1	When running QTP tests from the Test lab module there are automatically run in	Fast Mode	Normal Mode	Batch Mode	Silent Mode	Test Execution
94	92	M	3	Template tests are test designs that contain steps and parameters that are reusable across different	Test sets	Projects	Tests	Requirements	Test Planning
95	93	M	2	What feature allows you to setup test reruns and cleanup tests when running automated tests	Test Run Properties	On failure Rules	Configuration	run events	Test Execution
96	94	M	3	Quality center allows for the entry of defects at what stage during the testing process	Test execution	Test Planning and Execution	Requirements, Test planning and Test execution	None of the above	Introduction
97	95	M	1	What does the ? Icon next to test in the Test plan module signify	Unsupported test type	Unsupported add in	incomplete data	Test not completed	Test Planning
98	96	M	3	The Test planning - Trend Graph displays what type of information	Number of test accumulated in QC projects at specific points during a period of time	the number of tests that are currently in Quality center Project	The history changes to specific test plan fields in QC project for each time interval displayed	Displays Requirements covered in Tests	Test Planning
99	97	M	2	What Graph feature allows you to customize the graph title, graph color and graph display?	Graph properties	Set Graph appearance	Graph configuration	Display options	Reporting
100	98	M	4	What web client can be used with QC?	Netscape	Safari	FireFox	Internet explorer	Introduction
101	99	M	2	What term describes the main function of QC?	test cases	Repository	load tests	defects	Introduction
102	100	M	3	What database can be used with QC 9.2?	Access and Sybase	Oracle and Paradox	SQLServer and Oracle	All of the above	Introduction
103	101	M	4	Which HP functional testing tools integrate with QC?	HP Open View and Win Runner	HP WInRunner and HP LoadRunner	Winn Runner and performance center	WinRunner and QTP	Test Planning
104	102	M	3	Which component provides an executive level view of the entire QC?	QC Foundation	Business Process insight	Quality Center Dashboard	Service test component	Reporting
105	103	M	2	When designing test steps it is important to ensure that all aspects of the application are tested. When writing test steps what are two things that should be done to ensure clear and accurate steps	specify all actual results and use parameters to the step name	Specify pass and fail conditions for the step and use consistent terminology throughout the test	using the numbering system for the tests	All of the above	Test Planning
106	104	M	4	What are the steps in the correct Order to convert a requirement to a test?	make changes to the automatic conversion and select an automatic method	Select convert to tests destination path and convert to automated test	select the destination subject path with automated method and make changes to the automatic conversion	Select an automatic method ,make changes to the automatic conversion and select the destination subject path	Defining Test Requirement
107	105	M	2	When you define tests inside quality center it is important that the tests are accurate and traceable. What are two other key pointers when defining test.	simple and consistent	consistent and appropriate	repeatable and convertible	consistent and automation	Test Planning
108	106	M	1	What type of test can be created in Quality center select three?	load, System and Winrunner	batch test, vugen and RPT tests	system, Business process and interface tests	Business, commercial and System tests	Test Planning
109	107	M	4	Links between requirements and tests can be defined from	Test Plan	requirement Module	Defects	Both A&B	Test Planning
110	108	M	3	In which module of QC we will Generate test scripts?	Requirements	Test lab	Test plan	Defects	Test Planning
111	109	M	3	What will be the default test type when you create a test?	Load runner	Win Runner	Manual	Quicktest_test	Test Planning
112	110	M	1	Calling a Test with parameters can be done through	Design steps	Test Scripts	Requirement coverage	None of the above	Test Planning
113	111	M	3	Defining a parameter can be done using	step option	Script option	parameter properties	all of the above	Test Planning
114	112	M	2	Which option will allow to launch an automated script?	Link defects	Test Script	Design steps	Requirement Coverage	Test Planning
115	113	M	4	What is a Test set includes?	Group of tests	Manual Tests	Automation Tests	all of the above	Test Execution
116	114	M	4	Elements of the Test lab Module ______	Test sets tree	execution grid and flow	Properties	all of the above	Test Execution
117	115	M	4	Run schedule for the test is done through	Test run sequence	Test run condition	Defining tests	all of the above	Test Execution
118	116	M	4	Run schedule of the test contains	execution conditions	Time dependency	Test with finished status	Both A&B	Test Execution
119	117	M	4	Run schedule of Test for time dependency can be	any time	specified time	Date and time	all of the above	Test Execution
120	118	M	4	Test set properties include	Notifications	On failure	Message	Both A&B	Test Execution
121	119	M	1	Run clean up tests before each rerun of the test with	Manual sign Off	Automated Sign off	both a and b	None of the above	Test Execution
122	120	M	4	Running tests manually include	Exec steps	end of run	cancel with attachments	all of the above	Test Execution
123	121	M	4	Viewing of test run results through	execution grid	execution flow	Test set properties	Test run	Test Execution
124	122	M	3	The test sets tree organizes your test sets	sequentially	randomly	hierarchically.	None of the above	Test Execution
125	123	M	4	Test executions can be	sequenced	scheduled	rerun	All of the above	Test Execution
126	124	M	3	In the defects Module's summary sheet which is mandatory column	defects grid	add defect	summary	subject	Defect Tracking
127	125	M	4	The elements of the defects module include	grid	filter	description and History	all of the above	Defect Tracking
128	126	M	1	What will be the default status of the defect in the add defect ?	New	planned	rejected	deferred	Defect Tracking
129	127	M	1	What will be the default status of the Regression value in the add defect?	N	New	planned	Y	Defect Tracking
130	128	M	1	What is the symbol for the trace changes?	exclamatory mark	question	flag	None of the above	Defect Tracking
131	129	M	1	What is the symbol for the track changes?	flag with red symbol	flag with question mark	flag with dot mark	all of the above	Defect Tracking
132	130	M	1	How many defects can be associating to a test by default?	one	Multiple	both a and b	None of the above	Defect Tracking
133	131	M	4	An associated test can be viewed through	details	view report	rerun test and manually	all of the above	Test Execution
134	132	M	4	Defects can be logged at any stage from which module?	Requirements	Test Lab	Test Plan	all of the above	Defect Tracking
135	133	M	3	When adding a sub report what will be the default type?	associated requirements	associated graphs	associated defects	all of the above	Defect Tracking
136	134	M	4	A test set is a group of tests designed to achieve specific	Test rerun	Test scripts	Test defects	testing goals	Test Execution
137	135	T	2	Test set folder can be assigned to a release	TRUE	FALSE			Test Execution
138	136	M	3	How do you access context specific Shortcut menus in QC?	Click on interface element	using F5 short cut key	right click certain interface elements	Double click on interface element	Test Execution
139	137	M	3	How do you create a test plan tree manually	Creating folders	create tests	Create folders and adding tests to this folders	None of the above	Test Planning
140	138	M	4	In the Test lab module define a group of tests called	Test Modules	Test Units	Test components	Tests sets	Test Execution
141	139	M	1	In Which Module the Testing process starts	Release	Test Plan	Test Execution	Defects	Defining Test Requirement
142	140	M	1	At which stage during the testing process you can add defects.	Requirements, Test planning and Test execution	Test execution	Test Planning and Execution	None of the above	Defect Tracking
143	141	M	4	Send an email in the event of	status as failed	finished their runs	details sets	both a and b	Test Execution
144	142	M	4	The Test team records requirements in QualityCenter by creating a	Requirements Grid	Requirements Matrix	Requirements tree	Requirements outline	Defining Test Requirement
145	143	M	2	Through Which Module do you link test to requirement	Test Plan Module	Requirement Module	Test Lab module	None of the above	Defining Test Requirement
146	144	M	4	To ensure traceability a test case must map back to a	defects	TestSet	Test plan	requirements	Test Planning
147	145	M	4	To what entities defect can be associated with	Requirement, Test and Test set	Test Instance, Test Run	Test Step and Defect	All of the above	Defect Tracking
148	146	M	4	What are options available in Tools menu of Common toolbar	Change project, customize, Defects	Clear history, Document Generator	Excel Report generator and Dash board	All of the above	Introduction
149	147	M	4	What are testing levels defined in QualityCenter	complete, medium, None	Full, medium, none	High, Medium , Low	Full, basic, partial and None	Analyze Requirement Risks
150	148	M	4	what are the settings done in Test set properties when an automation test fails	Rerun the test set up to	Run clean up test before each rerun of the test	settings per test	Both a and b	Test Execution
151	149	M	4	What is the different Criterions of business Criticality	Critical	Important	Nice to have	All of the above	Analyze Requirement Risks
152	150	M	4	what will be the default value of the Priority in the add defect	high	low	medium	blank	Defect Tracking
153	151	M	4	When running QTP tests from the Test lab module they will run automatically in	Normal Mode	Batch Mode	Silent Mode	Fast Mode	Test Execution
154	152	M	4	How do we save the favorite view	Private or Public favorite	Organize favorites	defects Module - Select favorites and save	Defects Module -- select and Add to favorites	Reporting
155	153	M	2	Which option you will use to view columns as per your choice?	select view coverage	Select columns	Select Requirements	None of the above	Defining Test Requirement
156	154	M	3	While designing the test plan tree you accidentally delete a folder that contained some tests that you need. Can you recover the tests	no. once deleted we can not get them back	the test can be recovered from the subject folder	the test can be recovered form the unattached folder	Project manager have permission to recover deleted tests	Test Planning
157	155	M	1	While working in the Test Grid view, you only want to see Win Runner and Quickest tests. Which filter on the type will return only these tests	QUICKTEST_TEST Or WR-AUTOMATED	QUICKTEST_TEST And WR-AUTOMATED	QUICKTEST_TEST And = WR-AUTOMATED	Not Manual	Test Planning
158	156	M	4	A User wants to run several tests sets concurrently on multiple remote hosts. In Order to accomplish this task in Quality center you must	Combine all of the tests into one Test Set	Open a new execution dialog box instance for each 'Test set'	Select each test set in the Test Sets Tree and click on RUN	set up the host machines in the execution flow tab for each Test Set	Test Execution
159	157	M	4	Associating defects and tests ensures	flag for follow up	invert selection	Parameters	traceability	Defect Tracking
160	158	M	4	When executing a Test set you would like your manager to be notified of any test fail that occur. In which Test Lab tab can this be set up	Execution flow	Linked defects	Execution Gird	Test Set Properties	Test Execution
161	159	M	3	if an automated test fails we can rerun the test up to	2 times	3 times	n times	None of the above	Test Execution
162	160	M	4	In QualityCenter you have the ability to add a follow up flag to remind your self to follow up an issue. When the follow up date arrives QC sends you an email . What QC elements can you set a follow up flag on	a requirement in a Requirements module view	test in the test plan tree or Test Grid	A test instance in the Execution Grid and a defect in the Defects Grid or Defect Details dialog box	All of the above	Reporting
163	161	M	1	What will be the default status of the New execution condition	Finished	Passed	Failed	None of the above	Test Execution
164	162	M	4	What Quality center element would you consider to be the building blocks for creating Test sets	Test Plans	Requirements	Design steps	Tests	Test Execution
165	163	M	4	What are the key pointers for designing Test steps	active case	action per step	field names	all of the above	Test Planning
166	164	M	4	Before Executing a tests for testing your requirements, you tie test set folder to a cycle for:	Reviewing the progress of tests in the Release module	Determining the number of resolved and outstanding defects at a release or a cycle level	Enhancing the reporting granularity for the test set folder.	All of the above	Test Execution
167	165	M	4	You use Requirement Details view to	Display requirements according to tests with which they are associated	The requirements with which they are traced	Defects with which they are linked.	All of the above	Defining Test Requirement
168	166	M	2	Risk tab enables you to calculate and analyze risk associated with a	Release	Requirement	Test Plan	Test Lab	Analyze Requirement Risks
169	167	M	2	Requirement Traceability tab provides two tabs	Relationships and Traceability	Relationship and Impact Analysis	Impact Analysis and Traceability	Relationship and Test Coverage	Defining Test Requirement
170	168	M	2	How many ways are there for creating test plan tree.	1	2	3	None of the above	Test Planning
171	169	M	1	To reuse a test design across different tests, you configure it as	Template tests	Automated Test	Manual Test	None of the above	Test Planning
172	170	M	3	Live Analysis graph is generated from	Requirement Module	Release Module	Test Plan Module	Defect Module	Working with releases
173	171	M	4	What is the name of main folder in Test Plan Module	Test	Root	Requirement	Subject	Test Planning
174	172	M	4	Execution Grid in Test Lab Module Enables you to	Declare the test sets	Run test sets	Review the result of Execution	all of the above	Test Execution
175	173	M	4	In the Test Lab Module, you use the execution flow tab to :	Graphically map the execution flow	Schedule test to based on the execution completion status of other test.	Schedule test to run independently from other test.	All of the above	Test Execution
176	174	M	4	A defect can be linked directly or indirectly to an entity. This linkage enables you:	Trace your defects from the perspective of quality center entities.	Search defects that are related to specific quality center entities.	Link multiple entities of the same type to the same defect	all of the above	Defect Tracking
177	175	M	4	Defects can be directly associated with the following entity.	Requirement	Test	Test set	All of the above	Defect Tracking
178	176	M	4	Requirement module displays the requirement in how many different views	2	5	3	4	Defining Test Requirement
179	177	M	1	Select Columns option is enable in requirement module in following view	Requirement Tree, Requirement Grid	Requirement Details, Requirement Grid, Requirement Tree	Coverage Analysis, Requirement Details, Requirement Tree	Coverage Analysis, Requirement Details	Defining Test Requirement
180	178	M	1	What is the Direct Cover status of requirement which is not connected to test cases.	Not Covered	No Run	Not Completed	Failed	Defining Test Requirement
181	179	M	4	What is the Direct cover status of requirement which is connected with test cases but test is not executed	Failed	Passed	Not Completed	No Run	Defining Test Requirement
182	180	M	1	You can rename the default folder of	Release Module	Requirement Module	Test Plan Module	Test Lab Module	Working with releases
183	181	M	1	How many views are available in test lab module	2	3	4	1	Test Execution
184	182	M	2	How many views does the test plan Module have?	1	2	3	4	Test Planning
185	183	M	1	What are the views available in test plan module	Test Grid, Test Plan Tree	Test Plan Tree, Test Grid, Test Plan Details	Test Plan Details, Test Plan Tree	Test Grid, Test Plan Details	Test Planning
186	184	M	2	What are the views available in test lab module	Test Sets Tree, Test Sets Grid, Test Sets Details	Test Sets Tree, Test Sets Grid	Test Sets Tree, Test Sets Details	Test Set Grid, Test Sets Details	Test Execution
187	185	M	3	Quality Center is which type of tool	Configuration management tool	Defect Management Tool	Test Management System	None of the above	Introduction
188	186	M	3	The ………determines the privileges that the user has within a project.	User ID	User Name	User Group	User SID	Introduction
189	187	M	1	Quality Center 9.2 prompts you to install Microsoft .NET ……………… if it not already installed on your machine.	Framework 2.0	Framework 1.0	Framework 3.0	Framework 4.0	Introduction
190	188	M	2	The …………. Can change and override a user's properties or password.	Global Administrator	Site Administrator	Administrator	QC Administrator	Introduction
191	189	M	3	You can filter quality center data to display only those records that meet the criteria that you define. How many filters can you define	Only one filter	Only two items as a filter	Multiple items as a filter	We can set filters in QC	Defect Tracking
192	190	M	3	In the test plan tree you can define the ……… filter for associated test sets as 'Open'. This ensures that only tests that belong to an open test set are displayed.	Double	Twice	Cross	Multiple	Test Planning
193	191	M	3	By default, records appear in quality center in the	Ascending order	Descending order	Order in which they were added	None of the above	Introduction
194	192	M	4	When you use text search, the search ignores	articles (a, an, the)	coordinate conjunctions(and, but, for, not, or)	Boolean operators (and, or, not, if, then)	all of the above	Test Planning
195	193	M	4	You can export the data in grid as a	Text file	Microsoft Excel worksheet	Microsoft Word document	All of the above	Reporting
196	194	M	1	The alerting functions in quality centers are	Automatic notification alerts, Follow up alerts	Email alerts, Automatic notification alerts, Follow up alerts	Defect alerts, Email alerts, Automatic notification alerts, follow up alerts	Final alerts, Email alerts, Automatic notification alerts, follow up alerts	Reporting
197	195	M	1	You can create traceability links between………… in the requirement module	Requirements	Requirements and Test Case	Tests	Defects	Defining Test Requirement
198	196	M	2	You can associate a test instance with a defect. This is performed by creating ………… in the test plan module, or by adding a defect during a manual run.	Linked tests	Linked Defects	Linked Errors	Linked Data	Test Execution
199	197	M	4	You access Quality Center over the ……..,via a web browser.	Internet	a corporate intranet	mobile internet	Both A and B	Introduction
200	198	M	2	Each Quality Center project is supported by a ………… that stores project information.	Root folder	Database	Flat file	both b and c	Introduction
201	199	M	4	Quality Center Enables you to manage user access to a project. The ………determines the privileges that the user has within a project.	QC group	user _Account group	Account Group[	User Group	Introduction
202	200	M	3	You can import data from …………..to a quality center project.	Word or Notepad	Word or WordPad	Word Or Excel	Word or Power Point	Reporting
203	201	M	4	Quality Center prompts you to install …………. If it is not already install on your machine.	Microsoft Java 2.0	Microsoft Visio 13.0	Microsoft Visual Studio 2.0	Microsoft .NET Framework 2.0	Introduction
204	202	M	4	The ………… can send messages to users connected to quality center projects informing them about important maintenance or other issues.	Site User	site controller	site Analyzer	site administrator	Introduction
205	203	M	4	Quality center organizes and displays data in ……….	Grids	Trees	Folders	Both A And B	Introduction
206	204	M	3	When Defining a filter, you can also include a cross filter, This is an advanced ………… on an associated item such as requirement ,tests, test sets or defects.	Secondary filter	Primary filter	Cross Filter	Second Filter	Defect Tracking
207	205	M	1	You can use text search for records in predefined fields of the ……..	Requirements, Test Plan, Defects Module	Releases, Test Plan, and Defect Module	Requirements, and Defects Module	Requirements, Execute tests, and Defects Module	Test Planning
208	206	M	3	A ……………. Indicates that the alert is new. A gray flag indicates that the alert has already been read.	Green flag	Pink Flag	Red Flag	Blue Flag	Defect Tracking
209	207	M	2	Quality Center enables you to add your own alerts, in addition to automatic traceability notifications. You can use …… flags to remind yourself to follow up on something.	Alert me	Follow up	Follow me	Follow	Defect Tracking
210	208	M	3	A …………………. Is a view of a quality center window with the settings you apply to it.	Personal view	My view	Favorite view	Fav view	Defining Test Requirement
211	209	M	1	You save favorite views in either a………. Folder or a ………… folder. Views in a ………… folder are accessible to all users, Views in a …………… folder are accessible only to the user who created them.	Public, Private , Public, Private	Root, Base , Root, Base	Locked, Unlocked, Locked, Unlocked	Both B and C	Defining Test Requirement
212	210	M	4	You can view a list of alerts for a ……… entity	A test in the test plan tree or test grid	A test instance in the execution grid	None of the above	Both A and B	Test Planning
213	211	M	1	A red flag indicates that the alert is	New	Old	Follow up	Urgent	Defect Tracking
214	212	M	2	A gray flag indicates that the alert ………	New	Has already been read	Follow up	Urgent	Defect Tracking
215	213	M	4	Quality Center assigns the image a unique file name with …………extension	.jpeg	.gif	.doc	.jpg	Defining Test Requirement
216	214	M	4	You save Favorite views in ………….	Favorite Folder	Personal Folder	Both a and b	Public and Private Folder	Defect Tracking
217	215	M	2	Requirement topics are recorded in the requirements module by creating a	Requirements cycle	Requirements tree	Requirement plan	Requirement Module	Defining Test Requirement
218	216	M	3	QA manager changes a requirement from a ……… status to a reviewed status once it is approved.	Released	Tested	Not Reviewed	None of the above	Defining Test Requirement
219	217	M	2	You can also import requirements to your Quality Center project from Microsoft word, Excel, or their third party requirement management tools. To import requirement, you must first install the appropriate………..	HP Third Party add-in	HP Quality Center add-in	HP Quality Center	HP Quality Center License	Defining Test Requirement
220	218	M	4	The requirements Grid view enables you to display requirements in a …………. View	Flat	Hierarchical	Flat-hierarchical	Flat non-hierarchical	Defining Test Requirement
221	219	M	1	The …………… View enables you to analyze the breakdown of child requirements according to test coverage status.	Coverage Analysis	Coverage Requirements	Coverage	Coverage Tests	Defining Test Requirement
222	220	M	2	You can search for a particular requirement in the requirements tree or in the requirements grid using the ……. Command.	Search	Find	Search all	Find all	Defining Test Requirement
223	221	M	1	You can replace field values in the requirements tree or in the requirements grid using the ………… command.	Replace	Replace all	Find & Replace	Replace and Find	Defining Test Requirement
224	222	M	4	You can copy a requirement within the same project or between projects. Which of the below items are copied at the time of copying the requirement.	Test Coverage	Defect Linkage	Risk-based quality management data	None of the above	Defining Test Requirement
225	223	M	1	There are two methods you can use to create tests from requirements.	Convert requirements to tests and Generate a test from requirements	Convert Requirements to tests and Convert a test from requirements.	Convert Requirements to tests and Generate a Requirement from test	Convert a test from requirements and Generate requirements to tests	Test Planning
226	224	M	2	When analyzing the impact of a change proposed in a specific requirements, the traceability links indicates the other………. That the change might affect.	Tests	Requirements	Tests and Requirements	None	Analyze Requirement Risks
227	225	M	1	………..Links indicates requirements that affect a selected requirement. ……………. Links indicate requirements that are affected by a selected requirement.	Trace From, Trace To	Trace To, Trace From	From Trace, To Trace	None of the above	Analyze Requirement Risks
228	226	M	3	When a requirement changes, Quality center alerts the affected requirements. The alerts can be seen by…….	Author of the requirement	Users authorized by the Author of the requirement	All users	Administrator	Analyze Requirement Risks
229	227	M	1	Each Requirement type with risk based quality management enabled supports either.	Risk Analysis or Risk Assessment	Risk Breakdown or Risk Assessment	Risk Breakdown or Risk Review	Risk Analysis or Risk Evaluation	Analyze Requirement Risks
230	228	M	2	An …. Requirement is a requirement belonging to a type that represents requirements that are children of analysis requirements and at a lower level in the requirements tree hierarchy	Analysis	Assessment	Policy	Test	Defining Test Requirement
231	229	M	3	For each assessment requirement under the analysis requirement, you determine the Risk category. The Risk category composed of two factors.	Business Probability and Failure Criticality	Business Vitality and Failure Probability	Business Criticality and failure Probability	Business Criticality Failure Possibility	Analyze Requirement Risks
232	230	M	3	The failure probability of a requirement has three possible values….	High, Standard, Low	High, Average, Low	High, Medium , Low	None of the above	Analyze Requirement Risks
233	231	M	2	Quality Center Defines four Testing Levels	Full , Partial, Basic, Low	Full, Partial, Basic , None	Full, Half, Basic , None	High, medium, low, none	Analyze Requirement Risks
234	232	M	1	During Requirement risk calculation, the …… displays the requirements for which did not determine a risk category or exclude explicitly from the analysis	Missing assessment link	missing assessment field	missing assessment value	missing assessment relation	Analyze Requirement Risks
235	233	M	4	Which of the item is not a part of "Developing a test plan" in QC.	Design Test Step	Design Tests	Automate Tests	Define Testing Policy settings	Test Planning
236	234	M	1	To find a specific test by Test ID in the test Grid, Choose………. And enter the test ID	Test>Go to Test	Test> Find Test	Test> Search Test	Test> Link Test	Test Planning
237	235	M	3	Developing and editing a test plan tree requires appropriate user………	ID's	Requirements	Permissions	Passwords	Test Planning
238	236	M	1	To set a Quick test professional test as a template test, right-click the test in the test plan tree, and choose……	Template test	Template Tree	Template Plan	Template	Test Planning
239	237	M	2	A Question mark icon in the test plan tree indicates that the Quick Test Professional Add-in is ….	Not Activated	Not Installed	Not Enabled	Not Set	Test Planning
240	238	M	2	In the test Plan module, you create…….. By selecting requirements to link to a test.	RTM	Requirement coverage	Test coverage	SRS	Test Planning
241	239	M	3	In the Requirement module, you create …….. By selecting test to link to a requirement.	RTM	Requirement coverage	Test coverage	SRS	Defining Test Requirement
242	240	M	4	You can create design steps for …….	Manual	Automated Test	SRS	Both A and B	Test Planning
243	241	M	1	In the requirement module, you can use the ……… view to examine the status of your requirement.	Coverage Analysis	Coverage Breakdown	Requirement Status	Coverage Status	Defining Test Requirement
244	242	M	2	By default , coverage is available only for the following requirement types;…………	Functional, Testing, Defined.	Functional, Testing and Undefined.	Functional, System and Undefined.	Functional, System and Undefined.	Defining Test Requirement
245	243	M	3	To increase the flexibility and power of a test, you can add ……….to the called test and to the tests that call it.	Input Values	Output Values	Parameters	None of the above	Test Planning
246	244	M	1	While generating automated test scripts, what does WR-AUTOMATED automated test type means.	A test that is created by Winrunner	A test that is executed by Winrunner	A test that is deleted by Winrunner	None of the above	Test Planning
247	245	M	3	Using Quality Center Test lab module, executing tests also consists of ……..	Run test Automatically	Run test Manually	Both a and b	None of the above	Test Execution
248	246	M	1	The test lab module includes the following toolbars:	Test set and Select Tests	Test Select and Set Tests	Set Test and Tests Select	None of the above	Test Execution
249	247	M	2	In the test lab module , in execution grid columns, the column execution date means	The date on which the test was first executed.	The date on which the test was last executed.	The date on which the test was Created.	The date on which the test will be executed in future	Test Execution
250	248	M	4	You can organize test execution by creating……..	Test modules	Test flows	Test beds	Test sets	Test Execution
251	249	M	1	While creating the test sets, after you design tests in the Test Plan module, you create a …………….	test sets tree	test sets flow	test sets grid	test sets rows	Test Execution
252	250	M	4	By default, the uppermost level in a test sets tree is the ………..	Level 0 Folder	Top folder	Highest level folder	Root folder	Test Execution
253	251	M	1	In the Execution flow a dashed line - - - -> arrow indicates that the test	is to be executed independently.	it to be executed only if the previous test has status finished	is to be executed only if the previous test has status passed	None of the above	Test Execution
254	252	M	4	You can delete a ……. Execution condition(s) connected to a test	Single	Two	Three	All	Test Execution
255	253	M	3	You can run the tests automatically on …..	Your machine	Remote Hosts	Both a and b	None	Test Execution
256	254	M	3	You can view the test results from the……	Test Instance dialog box	Test properties dialog box	Test instance properties dialog box	None	Test Execution
257	255	M	1	Linked defects view on the sidebar of test instance properties dialog box displays:	Linked defects and requirements coverage for a test instance.	Only linked defects for a test instance.	Linked defects and history for a test instance	Linked defects and test results for a test instance.	Defect Tracking
258	256	M	3	In the test Instance properties dialog box, you can view and edit the On failure rules for an automated test instance using the …. View.	Automated	Details	Run Events	Both A & C	Test Execution
259	257	M	3	You track defects in quality center defects module, which you open by clicking the ….. Button on the sidebar.	Track Defect	Open Defect	Defects	Log Defects	Defect Tracking
260	258	M	4	To find a specific defect by defect ID in the Defects grid, choose………..	Defects > Defect	Defects > Move to Defect	Defects > Set Defect	Defects > Go to Defect	Defect Tracking
261	259	M	4	You can use the ……. To restrict and dynamically change the fields and values in the Defect Grid.	Scripting Editor	Notepad Editor	QC Editor	Script Editor	Defect Tracking
262	260	M	3	There are two methods you can use to conduct a search for similar/related defects;	Find parallel defects and find parallel text	Find parallel defects and related Text	Find similar defects and find similar text.	Find all defects and find all text.	Defect Tracking
263	261	M	4	You can update defects directly in the …… , or in the ……… dialog box.	Defect Grid	Defect Detail	Defect Module	Both A and B	Defect Tracking
264	262	M	1	Quality Center reports can be generated from the	Requirements, Test Plan, Test Lab, Defect modules	Requirements, Test Plan, Defect Module.	Requirements, Test Plan modules	Requirements, Test Plan, Test Lab modules	Reporting
265	263	M	4	Quality Center enables you to generate graphs from the ………	Requirements module	Test Plan module	Test Lab module	All of the above	Reporting
266	264	M	3	Requirements summary graph	Shows how many requirements accumulated in a quality center project at specific points during a period of time.	Shows the history of changes to specific requirements fields in a quality center project.	Shows how many requirements are currently in a quality center project.	Shows how many test are currently in a quality center project.	Defining Test Requirement
267	265	M	2	By default, the graph appears as a	Pie chart	Bar Chart	Pareto Chart	Both A and B	Reporting
268	266	M	1	You can determine how information appears in the graph using the ………..	Graph toolbar	Graph settings	Graph menu	Both A and C	Reporting
269	267	M	2	……… Graph enables you to create and display a dynamic graphical representation of data related to test plans and test sets.	Coverage Analysis	Live Analysis	Summary graph	None of the above	Reporting
270	268	M	4	You use Live analysis graphs to view data that relates to a ………. Folder.	Test subject	test set	test category	both A and B	Working with releases
271	269	M	4	You use the ……… pages to specify the information from the test plan tree view of the test plan module that should appear in the project document.	Subject tree	Subject tests	Subject plans	Both A and B	Test Planning
272	270	M	2	You can generate a ……. That enables you to quickly see how the document will look, without all the detail included.	View project document	preview project document	pre project document	None	Reporting
273	271	M	4	After you have added a report to the excel reports tree, you must define which project data you want to include in the report. You define this data by creating …….. To extract the data.	Test queries	Lotus Queries	Excel Macros	SQL queries	Reporting
274	272	M	2	To view the database type used for your project database, click the ……… button.	Database in use	Database Type	Get Database	Database Version	Reporting
275	273	M	2	You begin the application testing process by defining a releases tree in the ……..	Requirement Module	Releases Module	Plan Tests Module	Either B Or C	Working with releases
276	274	M	2	A releases represents a ……. In one or more applications that will be available for distribution at the same time.	Group of releases	Group of changes	Groups of defects	Groups of requests	Working with releases
277	275	M	1	After defining the release, a QA manager defines ……… A ……… is a set of development and quality assurance efforts performed to achieve a common goal based on the release timeline.	cycles, cycle	Tries, Try	Priorities, Priority	Files, File	Working with releases
278	276	M	4	After defining the releases tree , the QA manager defines and reviews the ……. In the requirements module and assigns them to releases and cycle.	Plans	Group of Plans	Upcoming modules	Requirements	Defining Test Requirement
279	277	M	2	After the QA Manager assigns requirements, the QA team leader assigns each ……. Folder in the Test Lab module to a cycle.	test case	Test set	Teststep	all of the above	Test Planning
280	278	M	1	While reviewing and deciding which new defects need to be fixed, the QA manager assigns them to the appropriate ………..	Release and cycle	Cycle and requirement	Defect and Cycle	Requirement and Defect	Defect Tracking
281	279	M	2	In the progress tab, in the coverage progress graph, the planed coverage curve below the assigned requirements curve indicates the percentages of requirements that are ……… throughout the release.	Run	covered	passed	assigned	Defining Test Requirement
282	280	M	4	The ……..helps you draw conclusions quickly and see the number of defects submitted over the courses of a release or cycle.	Details tab	Attachments tab	Progress tab	Quality tab	Working with releases
283	281	M	2	The defects are categorized by ………..in terms of how they impact system operation.	Priority	Severity	Both a and b	None of the above	Defect Tracking
284	282	M	1	After you define a releases tree in the releases module, you continue the application testing process by specifying …..	Requirements	Releases	Plan Tests	Run tests	Defining Test Requirement
285	283	M	2	The Requirements …….. Is a graphical representation of your requirements specification, displaying the hierarchical relationship between different requirements.	Graph	Plan	Path	Tree	Defining Test Requirement
286	284	M	3	After defining your requirements, you can add traceability between the requirements, when analyzing the impact of a change proposed in a specific requirements,………. Shows the other requirements that the change might affect.	Equality	Link-ability	Traceability	Cross-links	Defining Test Requirement
287	285	M	4	The assigned requirements are then used as a basis for the test plan in the test plan module. The tests you create during the test plan phase are the linked to these requirements to create ……….	Linkages	Linked-Requirements	Requirements Plan	Coverage	Test Planning
288	286	M	2	QA Manager reviews the requirements, they change a requirements from a not reviewed status to a …….. Status once it is approved.	Passed	Reviewed	Partially Reviewed	Both B and C	Defining Test Requirement
289	287	M	4	You can also import requirements to your Quality center project from……….	Microsoft word	Excel	Other third party Requirement management tools	All of the above	Defining Test Requirement
290	288	M	1	In the Requirements tree view, Indicator columns indicates that the specified requirements has …….	Attachments, linked defects, alerts, and follow up flags.	attachments , linked defects, alerts.	Attachments, linked defects, and follow up flags	Linked defects, alerts, and follow-up flags.	Defining Test Requirement
291	289	M	2	To find the specific requirement by Req ID in the Requirements Tree view, Choose ……….., and enter the requirement ID.	Requirements> Find Requirements	Requirements> Go to Requirements	Requirements> Get Requirements	Requirements> Display Requirements	Defining Test Requirement
292	290	M	3	The Requirements ……..view enables you to display requirements in a flat non-hierarchical view. Each line in the ……. Displays a separate requirement.	File , File	Hierarchical, hierarchy	Grid, Grid	Both B and C	Defining Test Requirement
293	291	M	3	The ……..Analysis view enables you to analyze the breakdown of child requirements according to test ….. Status.	Plan	Requirement	Coverage	Task	Test Planning
294	292	M	1	The Requirement module field Direct cover status means	The current status of the requirement	The previous status of the requirement	The coming status of the requirement	The next status of the requirement.	Defining Test Requirement
295	293	M	4	Methods you can use to create tests from requirements	Convert requirements to tests	Generate a Test from a Requirements	Get a test from a requirements	Both A and B	Test Planning
296	294	M	1	Using the requirements traceability tab in the requirement details view you can add traceability links to and from a selected requirement……….links indicate requirements that affect a selected requirement…………..links indicate requirements that are affected by a selected requirement.	Trace From, Trace To	Trace To, Trace From	Trace from select, Trace to select	Trace to select, Trace from Select	Defining Test Requirement
297	295	M	2	You can display traceability relationships that exist between requirements in the …… tab, This tab contains the trace from and Trace To grids	Traceability	Relationships	Req-traceability	Traceability-Req.	Defining Test Requirement
298	296	M	3	The …….. Feature enables you to calculate at which level to test each requirements, based on the nature of the requirements and the resources you have available.	Level-based quality management	Calculate-based quality management	Risk-based quality management	None of the above	Defining Test Requirement
299	297	M	1	You can assign or calculate the risk category of an assessment requirement. The Risk category is composed of its…….	Business Criticality and Failure Probability	Business Probability and Failure Criticality	Priority and Severity	None of the above	Analyze Requirement Risks
300	298	M	3	The ……. Link displays the requirements for which you did not determine a risk category or exclude explicitly from the analysis.	Missing risk assessment	Miss assessment	Missing assessment	Exclude assessments	Analyze Requirement Risks
301	299	M	2	QC is the tool provided by	Mercury	HP	IBM	None of the above	Introduction
302	300	M	4	Quality Center is a tool used for	Functional and Regression Testing	System Testing	Performance and Load Testing	Test Management	Introduction
303	301	M	1	The Second module in Quality Center 9.2 is	Requirement	Release	Test Plan	Test Lab	Defining Test Requirement
304	302	M	3	The last module in Quality Center is	Requirement	Release	Defect	Test Lab	Defect Tracking
305	303	M	4	VAPI-XP-TEST allows you to create a test using	Vbscript	Jscript	PythonScript	All of the above	Test Planning
306	304	M	3	You can run the automation test on	Local Machine	Server Machine	Both a and b	None of the above	Test Execution
307	305	M	3	How you can update the value of test parameter?	Right click on the calling step and select Test parameters	Double click on the calling step	right click on the calling step and select Called Test parameters	Test parameters can be updated only from the original tests	Test Planning
308	306	M	2	Which statements accurately describes functionality in the Test Lab?	Two different users can run the same Test set concurrently with both automated test cases	Test sets with automated tests run automatically when reach the time set in the exec date and planned exec time fields	You do not have the option to save filters in the Execution Grid as favorites	When copying and pasting test sets between projects you cannot copy the results of the previous runs of tests in the Test set	Defect Tracking
309	307	M	4	Which statements accurately describes functionality in the Execution Flow tab?	Dependencies between tests can be created by dragging a line from one test name to another test	you can run manual tests from the execution with Manual runner or the execution box	You can schedule the test run date and time by clicking the time dependency icon	Both a and b	Test Execution
310	308	M	3	QC application file is called as?	QC	QualityCenter	qcbin	sabin	Introduction
311	309	M	3	Test Plan module is used for	Creating manual test	Creating automated test	Creating both manual and automated test	Executing both manual and automated test	Test Planning
312	310	M	3	Test Lab module is used for	Creating a test sets	Executing test sets	Both a and b	None of the above	Test Execution
313	311	M	3	Defect module is used for	Reporting the defects	Tracking the defects	Both a and b	None of the above	Defect Tracking
314	312	M	2	Priority to the defect is mostly given by	Tester	Manager	Developer	None of the above	Defect Tracking
315	313	M	1	Defect fixing is depends on	Priority	Severity	Both a and b	Developer	Defect Tracking
316	314	M	4	You can find the status of application by	Traceability	Generating different Graphs	Generating Reports	All of the above	Defining Test Requirement
317	315	M	4	In Quality Center you can customized	Requirements Module	Release Module	Defect Module	All the modules	Introduction
318	316	M	1	Requirements Coverage is done in Planning Tests Phase	TRUE	FALSE			Test Planning
319	317	M	2	Requirement Mapping is not Possible via QC	TRUE	FALSE			Defining Test Requirement
320	318	M	1	Test case can be linked with Defect id during execution	TRUE	FALSE			Test Planning
321	319	M	2	Defect reporting is not possible via QC	TRUE	FALSE			Defect Tracking
322	320	M	1	Creation of test sets is done in Running Test Phase	TRUE	FALSE			Test Execution
323	321	M	1	Project should be included in the QC database to access the requirements of that project	TRUE	FALSE			Defining Test Requirement
324	322	M	2	Test lab Module enables you to add defects, determine repair priorities, repair open defects, and analyze the data	TRUE	FALSE			Test Execution
325	323	M	1	Traceability notifications cannot be done by normal QC user	TRUE	FALSE			Defining Test Requirement
326	324	M	2	Priority of the Requirement cannot be changed in QC	TRUE	FALSE			Defining Test Requirement
327	325	M	1	Adding New Defect can be done by using defect module	TRUE	FALSE			Defect Tracking
328	326	M	1	Defects graph summarizes the defects by status and priority level.	TRUE	FALSE			Defect Tracking
329	327	M	2	Execution of tests in your test set cannot be done Automatically	TRUE	FALSE			Test Execution
330	328	M	2	Requirements do not get displayed according to the tests with which they are associated in the test plan tree	TRUE	FALSE			Test Planning
331	329	M	1	Main Function of Requirement module is to share Common vision for requirements management	TRUE	FALSE			Defining Test Requirement
332	330	M	2	Coverage analysis view disables user to analyze the breakdown of child requirements	TRUE	FALSE			Reporting
333	331	M	1	Other Mercury tools like QuickTest Professional and LoadRunner can establish a connection to Quality Center and then store their tests into this structure.	TRUE	FALSE			Test Planning
334	332	M	1	In Test lab Module,testcases can be Moved to a Particular Test set from Select Tests	TRUE	FALSE			Test Planning
335	333	M	2	Tests cannot be scheduled to run unattended at off hours with no supervision	TRUE	FALSE			Test Execution
336	334	M	2	Requirements documents cannot be viewed in Coverage Analysis	TRUE	FALSE			Defining Test Requirement
337	335	M	1	Under Requirement coverage chart, RED color indicates FAILED	TRUE	FALSE			Defining Test Requirement
338	336	M	2	Each line in the Requirement grid specifies extension of existing requirement.	TRUE	FALSE			Defining Test Requirement
339	337	M	1	When a defect is repaired, its status is fixed.	TRUE	FALSE			Defect Tracking
340	338	M	1	A test set is the logical grouping of tests that should be run as a group	TRUE	FALSE			Test Execution
341	339	M	2	Latest versions of QC doesn't support both Linux and UNIX OS	TRUE	FALSE			Introduction
342	340	M	1	After you define requirements, tests, or defects in your worksheets, you can export them to Quality Center.	TRUE	FALSE			Introduction
343	341	M	1	In the Requirements module, the Analysis menu is available in the Requirements Grid view	TRUE	FALSE			Defining Test Requirement
344	342	M	2	In the Requirements module, the Analysis menu is not available in the Requirements Grid view	TRUE	FALSE			Defining Test Requirement
345	343	M	2	Test steps are designed before we add test to test plan tree	TRUE	FALSE			Test Planning
346	344	M	1	Is it possible to log defects during test run?	TRUE	FALSE			Test Planning
347	345	M	1	Unique requirement is the only requirement that defines testing objective?	TRUE	FALSE			Defining Test Requirement
348	346	M	1	In Requirement Details view DETAILS tab enables you to view and change the values of fields specified for selected requirement.	TRUE	FALSE			Defining Test Requirement
349	347	M	2	Attachment option is used to add only text files	TRUE	FALSE			Working with releases
350	348	M	1	You assign a requirement to a release to test the requirement in all the cycles	TRUE	FALSE			Working with releases
351	349	M	1	You assign a requirement to a cycle to test a requirement only within a specific cycle of release	TRUE	FALSE			Working with releases
352	350	M	1	One test can be associated with multiple defects	TRUE	FALSE			Defect Tracking
353	351	M	1	Defect Log during the manual test run are automatically associated with that specific test run.	TRUE	FALSE			Test Planning
354	352	M	2	Filter and Select Column options work in same manner	TRUE	FALSE			Defining Test Requirement
355	353	M	1	By Creating a list of authorized users and assigning each user a password and user group, you control the kinds of additions and modifications each user makes to the project	TRUE	FALSE			Introduction
356	354	M	1	You can import data from word or excel to a quality center	TRUE	FALSE			Reporting
357	355	M	1	When you connect to a project, the quality center main window opens and display the module in which you were last working	TRUE	FALSE			Introduction
358	356	M	1	You can save filter and sort information as a favorite view and then load it as needed.	TRUE	FALSE			Defect Tracking
359	357	M	1	You can copy and paste the filter, sort and group by settings to another project.	TRUE	FALSE			Defect Tracking
360	358	M	2	You can also share the settings ( filter, sort, and group by settings) with another user by passing them to email or text file.	TRUE	FALSE			Reporting
361	359	M	1	Quality Center is a sophisticated system for tracking application defects, enabling you to monitor defects closely from initial detection until resolution.	TRUE	FALSE			Defect Tracking
362	360	M	1	You launch Quality Center on your machine from your web browser	TRUE	FALSE			Introduction
363	361	M	1	When you customize your project, you can instruct quality center to preserve a log of values for the system and user fields in your requirement , test , test set, test instance, and defect entities.	TRUE	FALSE			Introduction
364	362	M	2	You can no longer customize data by specifying the order in which columns appear, and by changing column size.	TRUE	FALSE			Defining Test Requirement
365	363	M	1	You can filter quality center data to display only those records that meet the criteria that you define.	TRUE	FALSE			Defect Tracking
366	364	M	1	Text search is only available if it has been enabled for the projects.	TRUE	FALSE			Test Planning
367	365	M	1	When a requirement, test, or defect changes, quality center alerts the associated entities and can notify those responsible for any associated entities	TRUE	FALSE			Reporting
368	366	M	1	Throughout the testing process, you can add attachments to help illustrate your work.	TRUE	FALSE			Introduction
369	367	M	1	You can use a Uniform Resource Locater to a quality center record as an attachment.	TRUE	FALSE			Working with releases
370	368	M	1	A follow up flag is specific to your user login name. Anyone else viewing the records does not see your follow up alert.	TRUE	FALSE			Defect Tracking
371	369	M	2	You can rename or delete Requirements root folder.	TRUE	FALSE			Test Execution
372	370	M	2	You can not move a requirement to a new location in the requirements tree by dragging it..	TRUE	FALSE			Defining Test Requirement
373	371	M	2	You can delete a requirement from the requirements module. Deleting a requirement does not delete its child requirements, tests coverage, requirement traceability link, and defects linkage	TRUE	FALSE			Defining Test Requirement
374	372	M	2	While defining traceability relationships, you cannot add a requirement traceability link by dragging a requirement from the requirements tree to the appropriate grid…	TRUE	FALSE			Defining Test Requirement
375	373	M	2	The Failure probability of a requirement is a measure of how important the requirement is to your business.	TRUE	FALSE			Analyze Requirement Risks
376	374	M	1	In relation to a test plan module, You can add user-defined fields and change the label of any of the fields in the Test Grid	TRUE	FALSE			Test Planning
377	375	M	1	You can change the label of any of the test detail fields.	TRUE	FALSE			Test Planning
378	376	M	2	A test can cover more than one requirement, and a requirement can be covered by only one test.	TRUE	FALSE			Defining Test Requirement
379	377	M	1	Requirement coverage is created automatically when you convert a requirement to a test. Therefore, even if you have not yet added requirements coverage, it may already exist.	TRUE	FALSE			Defining Test Requirement
380	378	M	2	Test coverage is created automatically when you generate a requirement from a test.	TRUE	FALSE			Defining Test Requirement
381	379	M	1	You do not use to set a test as a template test to be able to call it or to add parameters, Making a test as a template test is used for filtering purpose only.	TRUE	FALSE			Test Planning
382	380	M	1	If you do not assign values to the parameters when creating a test call, you are promoted to do so when you call this test from another test, when you add your test to a test set, or when you run your test.	TRUE	FALSE			Test Planning
383	381	M	1	You can add user defined fields and change the label of any of the fields in the execution Grid.	TRUE	FALSE			Test Execution
384	382	M	1	You can also drag the test sets between lists.	TRUE	FALSE			Test Planning
385	383	M	1	The execution flow tab enables you to watch the execution process as it happens and to control the way your tests are executed	TRUE	FALSE			Test Execution
386	384	M	2	You can assign multiple values to a parameter during a test run.	TRUE	FALSE			Test Execution
387	385	M	1	If a manual test run was paused during execution, you can continue the run at a later stage.	TRUE	FALSE			Test Execution
388	386	M	1	When you run Quick Test Professional tests from the test lab module, they are automatically run in Fast mode. They can not be run in normal mode.	TRUE	FALSE			Test Execution
389	387	M	2	You can only view the execution log even if did not select Enable Log in the Automatic Runner dialog box before you executed the test.	TRUE	FALSE			Test Execution
390	388	M	1	Quality Center enables you to compare the results of a test run with the results of previous runs.	TRUE	FALSE			Test Execution
391	389	M	1	Each line in the defect grid displays a separate records.	TRUE	FALSE			Defect Tracking
392	390	M	2	You can add user defined fields and change the label of the fields in the defects grid.	TRUE	FALSE			Defect Tracking
393	391	M	1	You can link defects to the quality center entities, such as requirements, tests, other defects.	TRUE	FALSE			Defect Tracking
394	392	M	2	You can add new defect to the quality center project from releases module at any stage of the testing process	TRUE	FALSE			Defect Tracking
395	393	M	1	You can only see changes made to a defect for selected fields predefined by the project administrator in project customization.	TRUE	FALSE			Defect Tracking
396	394	M	1	You can link a defect to the run steps and other defects.	TRUE	FALSE			Defect Tracking
397	395	M	2	You can only remove direct links from the linked defects grid. Indirect links are removed automatically when the direct links are removed.	TRUE	FALSE			Defect Tracking
398	396	M	1	You can also use the graph wizard to guide you through the graph creation process.	TRUE	FALSE			Reporting
399	397	M	1	The live analysis graphs that you create are unique for your user login	TRUE	FALSE			Reporting
400	398	M	1	The quality center document generator enables you to create a Microsoft word document containing a project's requirements, planning, test list, test set folders, and defect tracking data.	TRUE	FALSE			Reporting
401	399	M	1	The document generator enables you to create a hard copy of the data contained in a quality center project.	TRUE	FALSE			Reporting
402	400	M	2	You can define a logo for the project document, and save the image so that it is available for other users in the current project. If you do not select an image, the document generator uses the mercury logo in the project document.	TRUE	FALSE			Reporting
403	401	M	1	You can generate Excel reports that enables you to export quality Center data to Microsoft Excel and analyze the data from within Excel.	TRUE	FALSE			Reporting
404	402	M	2	You can export quality center data to Microsoft Excel. You cannot create a reports with parameter.	TRUE	FALSE			Reporting
405	403	M	1	Releases tree enables the modeling of upcoming releases within a hierarchical tree structure.	TRUE	FALSE			Working with releases
406	404	M	2	A defect can not be submitted to quality center project from any module at any stage of the testing process.	TRUE	FALSE			Defect Tracking
407	405	M	2	The QA manager cannot track the progress of the testing process in real time by analyzing the releases tree and ensuring that it matches the release goals.	TRUE	FALSE			Working with releases
408	406	M	1	You can move a release folder or a releases to a different location in the releases tree.	TRUE	FALSE			Working with releases
409	407	M	2	The Releases Root folder can also be removed.	TRUE	FALSE			Working with releases
410	408	M	1	You can create a duplicate of a cycle within the same release	TRUE	FALSE			Working with releases
411	409	M	1	You can also move a release folder or a releases to a new location in the releases tree by dragging it .	TRUE	FALSE			Working with releases
412	410	M	2	Each requirement in the tree is described in detail and cannot include any relevant attachments.	TRUE	FALSE			Defining Test Requirement
413	411	M	1	QA Manager assign the requirements to releases and cycle in the release tree in the releases module.	TRUE	FALSE			Defining Test Requirement
414	412	M	1	You start a requirement tree by adding requirements to the requirements root folder	TRUE	FALSE			Defining Test Requirement
415	413	M	1	You can add, view and edit Microsoft word rich text from within quality center, without the need to edit the text in word.	TRUE	FALSE			Reporting
416	414	M	2	You cannot update your requirements directly in the requirements tree or grid, or in the requirements details dialog box.	TRUE	FALSE			Defining Test Requirement
417	415	M	1	You can send e-mail about a requirement to other users in your quality center project	TRUE	FALSE			Reporting
418	416	M	2	You cannot copy a requirement within the same project or between projects.	TRUE	FALSE			Defining Test Requirement
419	417	M	1	Test coverage, defect linkage, and risk-based quality management data for the requirement are not copied.	TRUE	FALSE			Analyze Requirement Risks
420	418	M	1	When a requirement changes, quality center alerts the affected requirements, the alerts can be seen by all users.	TRUE	FALSE			Defining Test Requirement
421	419	M	2	Releases module is used to prepare the requirements for a particular release	TRUE	FALSE			Working with releases
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000


1	Part A : UCF TBAS Application Testing 2.2	Sub Topics	No. of questions
2	Quality Center Overview	· Overview of Quality Center features, interface, working with releases, data, test planning, execution and defect tracking.	8
3	QC – Important Features	· Data movement from excel to Quality Center and Vice Versa, Requirements are definition and management in Quality Center, Building, designing and management of tests managed in Quality Center, Test execution cycles creation and management in Quality Center, Defect creation, management and tracking in Quality Center, Reports generation, customization and configuration in Quality Center, Data movement from word to Quality Center and Vice Versa
4	Database Basics	· Database concepts such as SQL, RDBMS, DML, DDL and Joins	7
5	Test Data Preparation	· Types of test data sets that are typically needed for execution and how test data can be generated
6	Tool Support for Testing	· Role of tools in various aspects of the testing lifecycle	5
7	VB Scripting	· Concepts of VB Scripting such as syntax, constants, functions, operators, statements	5
8	Part B : UCF TBAS Automation Testing 2.2	Sub Topics	No. of questions
9	Advanced QTP	. Expert View, Script generator, different run Modes, Debugging	25
10	Total Questions (Part A + Part B)	50


1
2
3
4	What are the two most commonly used ADO Objects ? A. Fields b. Execute c. connection,recordset d. open , connectionstring
5	Do Statements always end with ? Loop
6	In Automation approach framework function to be developed after or before feasibility study application ? After, Before , None , Both A and B
7	Successful automation framework must have the features ? Environment independent, Defined folder structure, Defined instance process, All
8	Empty is a VB script Keyword ? True
9	Which of the following is used to remove decimal places from a number ? Trunc , trim, pad , both a and b
10	How can you change the column name ? Cant be changed, Using alter system , Alter database , update
11
12
13	1. Expert view contains each step as a VBScript line. In VBScript line, in object based steps, the VBScript line defines the ____
14	a) Action b)Object c)test d)step
15	2. When the test or functional library run steps at a break point, You can use the _____ to check and modify the values of VBScript object $ variables
16	a) Debug window b)debug dialog c)debug viewer d)debug page
17	3. You can run in maintenance run mode when QT is set to use the _____run mode
18	a) Maintenance b)low level c)analog d)normal
19	4. When creating programatic description from an ActiveX test object $ the relevant run-time object is windowless, you must add ____ property to description $ set its value to true.
20	a)window Handle b)windowless c)winless d)none
21	5. The native property set for each run-time object is created and maintained by
22	a) QT b)object creation c)Microsoft d)Adobe
23	6. In QTPII, NEW function to load function library
24	a) ExecuteFile b) LoadLibrary c)ExecuteLibrary d)LoadFunctionLibrary
25	7. Version history dialog box is used to ? A) view version info about current test b) Retrive earlier version of test C) View earlier version of test d) All
26	8. ___ tracking options enable you to track application performance counter during run session
27	a) Local system monitor b) Global system monitor c)Local sys monitor d)Global sys monitor
28	9. Closing and restarting QT application
29	a) Application.Exit b) Application.Close c) Application.End d) Application.Quit
30	10. QTP wait for web page to load
31	a)BrowserTimeout b)BrowserNavigationTimeout
32	11. The command used to connect with database
33	a)Create object (Connectivity name)
34	b)dbConnect(Connectivity name)
35	c)Open(Connectivity name)
36	d)None
37	12. Which statement is correct to create dictionary object
38	a)Create object(Dictionary, Scripting)
39	b)Create object(Scripting, dictionary)
40	c)Create object(dictionary)
41	d)Create object(Scripting .dictionary)
42	13. ___ represent set of add-ins from the Add-in manager dialog browser
43	a) Addins collection b)Addin collection c)Addins manager collection d)Addin manager
44	14. How to declare a constant
45	a) Dim statement b)con statement c)constant statement d)option explicit statement
46	15. Test library architecture Framework requires collection of ___
47	a) SQA basic library b)API c)DCC d)All
48	16. For security reason, remote access to your QT application is not enabled. If you want to allow QC to open and run Qtest losts, you must select
49	a) Allow other HP products to run test
50	b) Allow other HP products to run
51	c) Allow other HP test and component
52	d) Allow other HP test to run component
53	17. Integration quick test with QC enables you to store and access files in QC project, as well as use the object to access the wide range of functionalities provided in QC
54	a)QC utility b)QC center utility c)QC connection d)QC util
55	18. Which of the following is correlate the sub-query ? In , exist , Union , insert
56	19. Didtinct is used for? selecting all the duplicate row , eliminate all duplicate row from o/p , both , none
57	20. Using preserve key word u can reduce the last array dimension ? False
58	21. test library architecture framework requires the creation of ? SQA basoc libraries , Api's , dll
59
60	22. what does the child objects methods returns ?
61	a) A Collection object
62	b) String true – false
63	c) Boolean true – false
64	d) Collection items.
65	23. To delay steps tools ?
66	a) Delay Step Execution by
67	b) Delay every step execution by
68	c) Delay all steps execution by
69	d) Delay each step execution by
70	24. when you run in a maintenance mode the ____ opens for steps that failed because an object was not found in application ?
71		a) Maintenance Wizard
72		b) Maintenance Run Wizard
73		c) Maintenance Run Option
74		d) Maintenance Work Wizard
75	25. ____Pane enables u to view and define general information about ur test including add-in?
76		a) Test Property Pane
77		b) Action Property Pane
78		c) Set Property Pane
79		d) Property Pane
80
81	26. You can use ___ Property to completely disable or enable reporting steps?
82		a) Disable
83		b)Enable
84		c) Filter
85		d) enable –disable
86
87	27. Property Indicates whether QTP Beeps after sync?
88		a) BeepONSync
89		b) BeepAfterSync
90		c) Beep.Sync
91		d) BeepSync
92	28. ___ Methos in Wscript sends one or more keystrokes to the active window?
93		a) PressKey
94		b) SendKeys
95		c) SendMethod
96		d) PressMethod n
97
98	30. ___ is used to comment a code ?
99		a) Rem Statement
100		b) Apostrophe
101		c) Both
102		d) None
103
104	31. Randomized statement in VB initialize the random number ?
105		TRUE
106		FALSE
107
108	32. IsDate function returns in teger value?
109		TRUE
110		FALSE
111
112	33. Function that evaluate expression and return a value ?
113		a) Exp
114		b) Eval
115		c) Execute
116		d) None
117
118	34.Default data type of QTP ?
119		a) integer
120		b) String
121		c) Varient
122		d) Double
123
124	35. Concatenation of two strings >
125		a) $
126		b)&
127		c) And
128		d) *
129
130	36. What is Path Locator ?
131		a) PathFinder.Locale
132		b) PathFinder.Locate
133		c)Locale.PathFinder
134		d)Locate.PathFinder
135
136	37. Mechanism used to identify objects using run session?
137		a) Recovery Scenario
138		b) Smart identification
139		c) Handling Objects
140		d) Ordinal Identifier
141
142	38. to get count value of list and combo box ?
143		a) GetItemsCount
144		b)GetCount
145		c) GetItemCount
146		d) None
147
148	39. QC connection is must for ?
149		a) Linear Scripting
150		b) Data Driven Framework
151		c) Hybrid Framework
152		d) HP BPT Framework
153
154	40. Statement to return a value from the functio ?
155		a) Return(return value)
156		b) Exit (Return value)
157		c) Function name = Return value
158		d) None
159
160	41. Method used for the browser to complete current navigation ?
161		a) Exist
162		b) Wait
163		c) WaitProperty
164		d) Sync