Nicolai-HELIUS-TB-Tech_Sheet-2017 - ready


1	HELIUS-TB - 2017								Aktualisierungen, Änderungen und Tippfehler vorbehalten/ Updates, changes and typing errors reserved	Wird geladen...
2		Rahmengrößen	frame sizes	small	medium	large	x-large	xx-large	Wird geladen...
3		empfohlene Rahmengröße	recommended frame size	164-172 cm	170-180 cm	178-190 cm	188-200cm	auf Anfrage/ on enquiry
4	A	Oberrohrlänge	top tube length	575 mm	598 mm	618 mm	638 mm
5	B	Sitzrohrlänge	seat tube length	400 mm	470 mm	490 mm	515 mm
6	C	Steuerrohrlänge	head tube length	110 mm	110 mm	120 mm	130 mm
7	D	Radstand	wheel base	1122 mm	1151 mm	1177 mm	1201 mm
8	M	Sitzrohrüberstand	Seattube offset	40 mm	80 mm	95 mm	100 mm
9	O	Schrittfreiheit	standover	730 mm	740 mm	756 mm	775 mm
10	Q	Reach	reach	408 mm	427 mm	450 mm	467 mm
11	R	Stack	stack	582 mm	614 mm	622 mm	630 mm
12
13		Geometrie Details	geometry details	details for 27,5" S geometry	details for 29" M, L, XL geometry	Wird geladen...
14	E	Lenkwinkel	head angle	67,5°	68,5°
15	F	Sitzrohrwinkel real	seat angle	74°	74,5°
16	G	Tretlagerhöhe zu Achse	bottom bracket drop	-15 mm	-34,5 mm
17	Hr	Hinterbaulänge	chain stay length	435 mm	445 mm
18	I	Sattelstützendurchmesser	seatpost diameter (size S-L)	31.6 mm
19	I	Sattelstützendurchmesser	seatpost diameter (size XL-XXL)	30,9 mm
20		frames without seattube-gusset		30,9 mm
21	K	Gabel-Referenzmaß	fork reffering measurement	519 mm	528 mm
22	L	Federgabelvorstand	fork offset	42 mm	46 mm
23	P	Dämpfer-Einbaulänge	shock absorber length	190 x 51 mm
24	N	Reifendurchmesser (short setup)	tire diameter (short setup)	715 mm	745 mm
25	HS	Steuersatzhöhe	headset stack	3 mm
26
27		Schnittstellen Maße	device measurements
28		empfohlener Gabelfederweg	matching fork travel	120-140 mm	110-130mm
29		maximale Gabeleinbaulänge	maximum fork length	529mm	538mm
30		freigegeben für max. Gabel-Standrohr Ø	approved for max. fork upper tube Ø	34 mm
31		Bremsenmontagestandard	brake mount standard	PM180
32		maximale Bremsscheibengröße hi.	maximum rear-disc diameter	185 mm
33		Hinterrad Nabenbreite / rear axle width	rear axle width	142x12 mm
34		max. empfohlene Reifenbreite 27,5"	max. recommended tire width 27,5"	60,5 mm (2,5")
35		vordere Dämpfer-Einbaubreite	front shock mount clearance	22,0 x 8 mm
36		hintere Dämpfer-Einbaubreite	rear shock clearance	22,0 x 8 mm
37		ISCG 05	ISCG 05	✔
38		Reverb Stealth ready	Reverb Stealth ready	✔
39		Flaschenhaltermontage	bottle cage mount	✔
40
41		Steuerohr Standard	headtube standard		ZS 44/56
42		Steuersatz min. Einpresstiefe unten	ahead set min. insert depth	11 mm
43		Benötigter Steuersatz für tapered Gabelschaft	needed headset for tapered forks	ZS44/28.6 \| ZS56/40


1	PARTLIST	Wird geladen...
2	under construction


1	LINKAGE	Wird geladen...
2	Linkage Characteristics HELIUS TB - 190mm Shock
3	under construction


1		HELIUS TB - FAQ	Wird geladen...
2
3	1


1	GENERAL INSTRUCTIONS
2
3	1	If you order a frame of the ION family without a shock the adjustmentbolt of the excentric key (ET-KEY) is not completely tightened. This ensures an easy assembly of the rear shock. Please tighten the bolt to the specified torque before your first ride
4
5		Nr	Part			Torque
6		1	ET-KEY			7 Nm
7		2	Vorspanndeckel (Umlenkhebel & Schwingenlagerung) / Pre-Load cap (shock lever & swingarm pivot)			5 Nm
8		3	Dämpferschrauben / shock bolts			17,5 Nm
9		4	Schrauben Umwerfer / bolts front mech			7 Nm
10		5	Steckachse / Thru axle			10 Nm
11		tab.1: NICOLAI torque chart
12
13	Change of ET-key position
14
15	The ET-Key allows you to adjust the geometry of you bike, regarding geometry or shock length.
16
17	ION 16	adjustment of steering angle and bottom bracket height
18	ION G16 GPI	adjustment of steering angle and bottom bracket height
19	ION G13	adjustment of steering angle and bottom bracket height
20	ION G13 GPI	adjustment of steering angle and bottom bracket height
21	ION G16	adjustment of shock length and rearwheel travel
22	EBOXX ION 16	adjustment of wheelsize
23	EBOXX ION G16	adjustment of wheelsize
24
25
26		Nr.	Recommended Tools	Nr.	Recommended Tools
27		1	4mm Allen key	4	Torque wrench
28		2	10mm socket wrench	5	Loctite medium strength
29		3	Grease
30		tab.2: ION 16 ET key removal recommended tools
31
32	Wird geladen...				Wird geladen...
33
34
35
36
37
38
39
40
41	Step 1: Check the position of the ET key. Factory setting “LOW”				Step 2: Loosen the screw. Apply axial force to push the opposed ET key out
42
43	Wird geladen...				Wird geladen...
44
45
46
47
48
49
50
51
52	Step 3: Push the ET key completely out of its fitting				Step 4: Take the ET key completely out of its fitting
53
54	Wird geladen...				Wird geladen...
55
56
57
58
59
60
61
62
63	Step 5: Take the 10mm socket wrench to push the key on the opposite side out of its fitting				Step 6: Push it just enough to allow the key to rotate in the high or low position
64
65	Wird geladen...				Wird geladen...
66
67
68
69
70
71
72
73
74	Step 7: Apply some grease				Step 8: Push the key back in so that the outside sits flush in its fitting
75
76	Wird geladen...				Wird geladen...
77
78
79
80
81
82
83
84
85	Step 9: Repeat Step 7 and 8 for the left side. Take care that both keys are in the same position. Failure to comply could cause severe damages to the rider and the bike				Step 10: Apply a small amount of medium strength loctite on the clamp screw and tighten it to 7 Nm
86
87
88	Bei weiteren Fragen besucht bitte unsere Webseite unter: www.nicolai.net oder ruft uns an unter: 05185-957191
89	If you got a question please visit our website on www.nicolai.net or give us a call: +49 5185 957191