RFP 2025-205 DRT SpecInspTest fee proposal worksheet.xlsx

	A	B	C	D	E	F	G
1	Diego Rivera Theater FEE PROPOSAL WORKSHEET SPECIAL INSPECTIONS AND MATERIALS TESTING SERVICES
2	In addition to this worksheet, Proposers are to include the firm’s detailed unit rate sheet with 2025, 2026, and 2027 hourly billing rates and cost of all tests provided by the firm. Based on the construction documents and DSA 103 forms provided, the proposer is to determine which positions and tests are required, to estimate quantities and to note rates for these on this form. On this form, Proposers are to note its proposed pricing and estimated quantities of the services. The prices listed in Sections I, II, III and IV must be coordinated with the Proposer’s Section V BUDGET.
3	I. Hourly Rates
4	Category	Position Title/Description		Units	Estimated Quantity	Unit Rate	Estimated Budget
5	Professional and Management	Registered Geotechnical Engineer		Hour			$ -
6		Registered Civil Engineer (Forms)		Each			$ -
7		Project Engineer		Hour			$ -
8		Staff Engineer		Hour			$ -
9		Project Manager		%
10	Special Inspection, Testing, and Sampling	Lead Special Inspector		Hour			$ -
11		Earthwork/Asphalt Concrete Inspector and Materials Tester		Hour			$ -
12		DSA Shotcrete Inspector		Hour			$ -
13		DSA Masonry Inspector		Hour			$ -
14		CWI Welding Inspector		Hour			$ -
15		Nondestructive Testing (NDT) Inspector		Hour			$ -
16		ICC Inspector		Hour			$ -
17		Firestop Inspector		Hour			$ -
18		Inspector/Technician		Hour			$ -
19	Offsite Fabrication	Precast Concrete Inspection		Hour			$ -
20		CWI Welding Inspection		Hour			$ -
21		Non-Destructive Testing		Hour			$ -
22	Shift differential for prevailing wage positions only		Hourly Rate +:
23	Overtime factor for prevailing wage positions only		Hourly Rate x:
24	Doubletime factor for prevailing wage positions only		Hourly Rate x:
25
26	II. Fixed-Price Rates
27	Category	Position Title/Description		Units	Estimated Quantity	Unit Rate	Estimated Budget
28	Laboratory Testing	Lab Maximum Density 4-inch mold		Test			$ -
29		Lab Maximum Density 6-inch mold		Test			$ -
30		Plasticity Index		Test			$ -
31		Sand Equivalent		Test			$ -
32		Theoretical Maximum Density		Test			$ -
33		Asphalt Core Density		Test			$ -
34							Page 1 of 2
35	II. Fixed-Price Rates (continued)
36	Category	Position Title/Description		Units	Estimated Quantity	Unit Rate	Estimated Budget
37	Laboratory Testing (continued)	Mix Design Review		Each			$ -
38		Rebar Tensile/Bend		Set			$ -
39		Concrete Compressive Strength		Test			$ -
40		Mortar Cylinder Compressive Strength		Test			$ -
41		Grout Compressive Strength		Test			$ -
42		CMU Compressive Strength		Test			$ -
43		Composite Masonry Prisms Tests		Test			$ -
44		Absorption/Moisture Content/Oven Dry Density		Test			$ -
45		Linear Shrinkage		Test			$ -
46		Masonry Core Compressive Strength		Test			$ -
47		Masonry Core Shear Test		Test			$ -
48		High Strength Grout Cube Compressive Strength		Test			$ -
49		Fireproofing Dry Density		Test			$ -
50		High Strength Bolt Hardness, Wedge, Tensile Strength		Set			$ -
51		Sample Pickup		Trip			$ -
52	Equipment	Nuclear Gauge		Day			$ -
53		Pull /Torque Test Equipment		Day			$ -
54		Fireproofing Adhesion/Cohesion Test		Day			$ -
55		UT/NDT Testing Equipment		Day			$ -
56		Skidmore Equipment		Day			$ -
57	Complete the following section with any additional hourly positions or fixed-price items not included in the above Sections I and II. Additionally, for hourly positions indicate if those positions are subject to and governed by the Prevailing Wage Laws (“PW”) by specifying Yes (“Y”) or No (“N”). Insert additional pages if necessary.
58	III. Other
59	Category	Position Title/Description	PW?	Units	Estimated Quantity	Unit Rate	Estimated Budget
60	Category	Position Title/Description	Y/N	Units	Estimated Quantity	Unit Rate	Estimated Budget
61	Special Inspections	Sampling & Tagging Reinforcing Steel	Y	Hours			$ -
62		Coring Machine Operator	Y	Hours			$ -
63		Coring Machine Operator Helper, if needed	Y	Hours			$ -
64	Laboratory Testing	Weld Procedure Specification Review	N	Each			$ -
65	Laboratory Testing	Anchor Bolts & Rods Not Readily Identifiable	N	Each			$ -
66
67	IV. Reimbursable Expenses - LUMP SUM
68
69	Enter the Proposer’s Special Inspection and Materials Testing ESTIMATED BUDGET TOTAL. This is to be coordinated with the estimates given in sections above.
70	V. ESTIMATED BUDGET TOTAL
71	$ -
72
73							Page 2 of 2
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100