WIMA capacitors, 1uF-4.7uF

	A	B	C
1	Project	Capacitors	Notes

2	360 Bass Preamp	C1, C3, C9, C14, C16, C18, C19, C20, C23, C25, C34 (1uF) C28 (2.2uF)	C16 5mm OK; C1, C3, C9, C14, C18, C19, C20, C23, C25, C34 bottom; C28 electrolytic (positive leg marked on PCB).
3	360 Fuzz	C1, C3, C9, C14, C16	5mm underside for all positions.
4	424 Preamp	(none)
5	Achilles	C4, C10	C4 has space for 5mm. C10 can fit on underside of board.
6	Amethyst	C3, C29, C32	5mm underside.
7	Andromeda	C18, C21 (1uF) C6, C19 (2.2uF)	5mm OK for 1uF. Electrolytic for C6/C19 2.2uF (polarity marked on PCB)
8	Andromeda Deluxe	C8, C12, C20, C24, C25 (1uF) C6, C27 (2.2uF)	C8, C12, C20 can't fit (top or bottom); recommended to use MLCC. C24 and C25 can fit on bottom. C6 & C27 polarized (or C27 1uF).
9	Anomaly	(none)
10	Antipode	C11	5mm OK.
11	Anubis	(none)
12	Aperture	C7, C8, C9, C10	C7, C10 5mm OK. C8, C9 not enough space (use electro). C7 polarity right, C8/C9 positive left, C10 positive up
13	Apex	(none)
14	Aphelion	(none)
15	Apollo Mk. I	(none)
16	Apollo Mk. II	(none)
17	Arcturus	C13, C14, C23 (1uF) C6, C8 (2.2uF) C25 (3.3uF)	No space in v1.0. Use electrolytic for C6, C8, C25.
18	Ares	(none)
19	Argent	C5, C13	No space in v1.0. Use Kemets from Aion FX.
20	Argus	(none)
21	Artemis Mk. I	C5	5mm OK
22	Artemis Mk. II	C3, C6, C12	C3 no space; C6 OK; C12 no space
23	Ascalon	C11, C13, C14	No space for 5mm. Use MLCC or electrolytic (C11 and C13 positive left, C14 positive bottom)
24	Asteria Mk. I	(none)
25	Asteria Mk. II	C1 (2.2uF)	Use electrolytic (polarity marked on PCB).
26	Asteria Mk. III	C1 (1uF) C3, C8, C12 (2.2uF)	C1 5mm on underside or electrolytic (positive to the right). Use electrolytic 2.2uF (polarity marked on PCB).
27	Astra	(none)
28	Atom	C4	5mm OK
29	Aurora	C5	5mm underside.
30	Aurora Deluxe	C5	5mm underside.
31	Aurum	C13, C15, C17	5mm underside.
32	Axion	(none)
33	Azimuth	(none)
34	Azure	C7	5mm underside.
35	Beta Preamp	C2, C4, C9, C10, C13 (2.2uF)	Use polarized caps as in original. Polarity marked on PCB for each.
36	Binary	C2, C9, C19	5mm underside (C19 may fit on the top but will be tight)
37	Blaze	(none)
38	Blueshift	C6, C7, C17, C27, C39, C49, C54, C63, C64	No space for 5mm. Use MLCC or Kemet.
39	Cadmus	(none)
40	Calliope	(none)
41	Calypso	C13	5mm underside.
42	Cascade	C21	5mm underside.
43	Celeritas	C6	5mm OK
44	Cepheus	C11, C16	C11 underside. For C16, if you can raise it above the PCB and bend it forward slightly (over R23) then that's the best option, otherwise a polarized electrolytic with the positive side facing to the right.
45	Ceres	(none)
46	Cerulean	C9	5mm OK
47	Charon	C13, C16, C17, 18 (1uF) C7 (2.2uF)	C13, C18 underside; C16, C17 can be top side (but bottom will be easier). C7 polarized (positive to the right).
48	Chroma	C7, C10 (1uF) C2, C3, C8 (4.7uF)	5mm OK For C7/C10. Use electrolytic for C2, C3, C8.
49	Cinder	(none)
50	Cirrus	C2, C5, C10, C12	C5 underside; C2, C10, C12 no space. Recommended to use MLCC or Kemet. Can also use electrolytic. C2 and C5 must be bipolar. C10 positive leg left, C12 positive leg right.
51	Comet	C7, C13	C7 underside; C13 OK (must use 3mm LEDs so there's enough space)
52	Constellation	C9, C10	5mm OK in v1.1; otherwise C10 fits and can fit C9 on bottom of board
53	Convex	C11, C12	5mm OK.
54	Corvus	C6, C8	C6 5mm OK; C8 not enough space. Recommended to use 4.7uF electrolytic.
55	Crescent	C7	5mm underside.
56	Cumulus	C2, C5, C9, C13	C2 no space; C5 top side; C9 no space; C13 underside. Recommended to use C8 and C12 instead of C9 and C13. For C2 and C5, use 470n (no change) or bipolar electrolytic.
57	Cygnus	C14, C17 (2.2uF)	Recommended to use 2.2uF bipolar, or 1uF (no difference due to low impedance)
58	Deimos	(none)
59	Delta	C4, C8	5mm OK
60	Draco	C3, C9, C14	5mm OK
61	Dryad	C5, C11	5mm OK
62	Durandal	(none)
63	Dynamo	C3	5mm OK
64	DZ4 Preamp	C3, C5, C18, C23	5mm OK (C23 is tight and could be underside).
65	Eclipse	C2, C3, C5, C7 (2.2uF)	All 4 positions are 4.7uF nonpolar (bipolar) in the original. Due to the bipolar +/-15V supply, it's recommended to keep with bipolar capacitors, but they can be electrolytic if film isn't available. Can also substitute 1uF with no change in operation for guitar.
66	Elite	(none)
67	Elysium	C6, C7, C10, C16, C19, C21, C24	C6, C7, C16 underside; C10, C19, C21, C24 MLCC or 3.5mm.
68	Ember	(none)
69	Emerald	C2, C14, C15, C17	5mm underside, or MLCC.
70	Empyrean	C24	5mm OK
71	Empyrean Deluxe	C25, C31, C34 (2.2uF)	Use electrolytic (polar or bipolar). Polarity marked on PCB. 10uF for C25 and C31 as in original.
72	Ephemeris	C6, C9	5mm underside.
73	Epsilon	C1	5mm OK
74	Equinox	(none)
75	Flare	(none)
76	Fractal	C2, C4, C13	No space for 5mm, but 470n is fine in all positions (coupling caps after low impedance output).
77	Fusion	C10 (1uF) C7, C11 (2.2uF)	C10 can be 5mm on bottom side. For 2.2uF, use polarized, or 1uF OK for both.
78	Gaia Mk. I	C16, C21 (1uF) C26 (2.2uF)	No space for 5mm. Use MLCC or electrolytic (C16 pos left, C21 pos right, C26 pos left)
79	Gaia Mk. II	C14-15	C14 underside; C15 OK
80	Gale	C2, C6	5mm OK
81	Gladiator	C10, C22 (1uF) C19 (4.7uF)	C10 OK; C22 underside. Electrolytic for C19.
82	Gladius	C8	No space for 5mm on top or bottom
83	Graviton	C10, C12, C22	C10, C12 underside; C22 no space (could move C15-C16 down though)
84	Hadron	C6	5mm OK.
85	Halo	(none)
86	Halo Deluxe	C6, C9, C13, C27	C13 & C27 underside of PCB. C6 & C9 electrolytic or MLCC
87	Heliodor	C3, C6, C14, C20, C21	5mm underside.
88	Helios	C10, C14	Use C7 instead of C14; for C10, it can be made to fit, but it's tight. Use polarized electrolytic
89	Heliosphere	(none)
90	Hexeract	(none)
91	Horizon	C15 (2.2uF)	Use 2.2uF electrolytic.
92	Hydra	(none)
93	Hypercube	C2, C6, C7, C8, C10, C14, C17, C23, C24	C6-8, C10, C14, C17 can be 5mm (all on top board). For others (main board), use MLCC.
94	Ibex	C1, C4, C6, C9, C12	C6 no space; MLCC or bipolar electrolytic. The others can be 5mm.
95	Isotope	(none)
96	IVP Preamp	(none)
97	Ixora	C11, C12 (1uF) C4 (2.2uF)	5mm OK for 1uF. Use polarized for C4 (2.2uF), or larger size installed on the bottom of the PCB.
98	Karkadann	C2, C8, C10, C11	5mm OK.
99	L4 Bass Preamp	C25, C29 (2.2uF)	Use polarized electrolytic (C25 positive right, C29 positive left)
100	L5 Preamp	C28, C33 (2.2uF)	Can reduce values to 1uF (5mm) for both, or else use polarized electrolytic (C28 positive top, C33 positive left)