ABCDEFGHIJKLMNOPQRSTUVWXYZAAABACADAEAFAGAHAIAJAKALAMANAOAPAQARASATAUAVAWAXAYAZBABBBCBDBEBFBG
1
2
3
4
5
User Guide for Sculpt (For Sculpt only, not for Sculpt Ultra)
6
For Sculpt - Ultra resin user guide, click here:
7
For other resin user guides, please visit https://siraya.tech support section
8
Sculpt is developed to be as the go-to resin for model makers with high hardness, great surface finish, excellent resolution and high temperature resistance at 160C
9
Not only prints made with Sculpt is easy to get great looks with minimal post-processing effort. The hitemp feature allows Sculpt be used to make vulcanized rubber molds or to be printed as mold.
10
11
Due to higher polymer content for its outstanding mechanical properties, the ideal printing condition for Sculpt is over 25C.
12
If user can maintain a resin temperature of 30C, the printing time could be further reduced
13
It is recommended to shake Sculpt bottle vigorously before pouring
14
15
* Important, before printing Sculpt
16
Sculpt has that dark grey colors that model makers love, and we have already seen some great prints. However, it is also one of the few Siraya Tech resin that has heavy pigments, and it will settle after a long time. To get the best results out of Sculpt, SHAKE HARD (applies to all resins with pigments)

To do it correctly to shake that bottle for 20-30s before use. Stir up the resins that is already in the vat before each print. And if you just received Sculpt, before opening it up for the first time, turn it upside down for a minute (submerged in warm water is even better) and then shake for another minute or two to make sure you get a great mix.

IF you want to take it to next level, throw a small metal ball in there and shake, the object will significantly increase the efficiency of mixing pigments and resins.
17
18
Please download profiles base for Elegoo, Anycubic, Phrozen, Peopoly, EPAX, Creality
19
https://drive.google.com/drive/folders/1eCz4_dc0fT-jfBLp4L9mKYebY90lfHHO?usp=sharing
20
21
Exposure: Sculpt Grey
22
Recommended
Resin Temperture 25-35C
Room temperature 20-28C
23
PrinterLayer HeightExposure (s)# of Initial LayersExposure for Init LayersExposure (s)# of Initial LayersExposure for Init LayersNote
24
Photon50um18 (s)480 S18 (s)690 s
25
Photon MonoWhere to find printer profiles: https://drive.google.com/drive/folders/1eCz4_dc0fT-jfBLp4L9mKYebY90lfHHO?usp=sharing
26
Photon Mono XWhere to find printer profiles: https://drive.google.com/drive/folders/1eCz4_dc0fT-jfBLp4L9mKYebY90lfHHO?usp=sharing
27
Shuffle50um
Use TR250 profile
https://www.dropbox.com/s/v7puaea58scxewr/profile_phrozen-tr250-50um-shuffle_2018-12-06.json?dl=1
28
Shuffle XL50um
Use TR250 profile
https://www.dropbox.com/s/xinbughp5clviq7/profile_phrozen-tr250-50um-shuffle-xl_2018-12-06.json?dl=1
29
EPAX X150um14 (s)460 s14 (s)675 s
30
Elegoo Mars50um14 (s)460 s14 (s)675 s
31
Mars 2 ProWhere to find printer profiles: https://drive.google.com/drive/folders/1eCz4_dc0fT-jfBLp4L9mKYebY90lfHHO?usp=sharing
32
Mars 3Where to find printer profiles: https://drive.google.com/drive/folders/1eCz4_dc0fT-jfBLp4L9mKYebY90lfHHO?usp=sharing
33
SaturnWhere to find printer profiles: https://drive.google.com/drive/folders/1eCz4_dc0fT-jfBLp4L9mKYebY90lfHHO?usp=sharing
34
Sonic Mini 4KWhere to find printer profiles: https://drive.google.com/drive/folders/1eCz4_dc0fT-jfBLp4L9mKYebY90lfHHO?usp=sharing
35
Might 4KWhere to find printer profiles: https://drive.google.com/drive/folders/1eCz4_dc0fT-jfBLp4L9mKYebY90lfHHO?usp=sharing
36
Mega 8KWhere to find printer profiles: https://drive.google.com/drive/folders/1eCz4_dc0fT-jfBLp4L9mKYebY90lfHHO?usp=sharing
37
D750um15 (s)590 s
38
Inkspire50um18 (s)690 s
Inkspire does not specify its light output, one user told us it is very closely to Photon
39
Moonray
Moonray Ortho Clear Resin setting works well.
40
Slash50um
100um 5 sec
75um 4 sec
50um 3.5 sec
25um 2.8 sec
10um 2.5 sec

- LED power 250 (default)
- First layer for all 12sec/ first 3 layers (default amount).
- Slow setting for Lift speed
- 8mm lift height is safest and allow time resin to flow back (they only allow you to pick from 3,8, and 15mm height...which sucks...I'd like 6mm if I could.
- Cooldown between layers on auto (smaller prints i do 2sec to speed things up)
- Supports point(head) size no less than 1mm, but 1.5 is recommended with 2mm shaft.
41
Peopoly PrintersWhere to find printer profiles: https://drive.google.com/drive/folders/1eCz4_dc0fT-jfBLp4L9mKYebY90lfHHO?usp=sharing
42
43
Exposure: Sculpt Clear
44
Recommended
Resin Temperture 25-35C
Room temperature 20-25C
45
PrinterLayer HeightExposure (s)# of Initial LayersExposure for Init LayersExposure (s)# of Initial LayersExposure for Init LayersNote
46
Photon50um11(s)660 s
47
Peopoly Phenom
50um12s660 s
Use Peopoly Deft Profile to start
48
EPA X150um8 (s)650 s
49
Shuffle50um7.5(s)560 s
50
Shuffle XL50um11(s)575 s
51
Phrozen Transform50um8(s)560 s
due to variation in light system in Transform, best to calibrate your resin for your machine in your environment using this https://www.thingiverse.com/thing:4280278
52
53
54
Before Printing
55
It is a good practice to mix resin and expose the bottom of the vat to air before printing. This replenish oxygen in the vat and helps reduce peel force.
56
Sculpt especially benefit from mixing because it has pigments and may settle over time
57
It would also ensure print consistency if user can get the initial resin temperature above 25 and keep the environmental temperature above 20 C
58
59
Cleaning:
60
Use a painter brush (or any brush made with hair) remove excess resins on the printed part with Use 95% concentrated Ethanol or IPA to clean.
61
Do not submerge the parts in alcohol for more than 30 seconds. After 2-3 minutes of cleaning action, remove alcohol with a hair dryer or air blower. For complex part with lots cavities, it may be a good idea to clean/dry multiple times.
62
User can check by touching the dryed surface of the part to see if it is still sticky. If the dryed surface is still sticky, wash some more and dry again.
63
64
Sanding is easy with Sculpt. Use 1000 grit sand paper with a bit of mineral oil or water. Mineral oil adds lusters
65
66
Post Curing:
67
Sculpt reached its optimal strength when the printed part is post-cured with UV after cleaned. Use 395-405nm UV light and cure for about 15 minutes.
68
Make sure resin is completely cleaned off and there is not alcohol left (it needs to be dry) on the print before curing.
69
Curing by submerging object in water will significantly increase curing efficiency
70
71
Mold Release
72
It it a good idea to use mold release to help remove injected material for injection mold aplications.
73
Some of the releases and coatings that has worked for Sculpt Ultra users
74
https://www.amazon.com/SLIDE-HI-TEMP-release-lubricant-Nitride/dp/B004RFKJ3C
75
https://www.amazon.com/Rust-Oleum-248904-Paint-Spray-12-Ounce/dp/B003CT4AKM
76
https://specialtyresin.com/product/release-pro-1628
77
78
79
Mechanical Properties
80
Heat Deflection Point: 160C
81
Liquid Denisty (g/cm3) 1.13
82
Hardness (Shore D) 82
83
Tensile Strength at Break (Mpa) 63
84
Elogation at Break (%) 6
85
Young’s Modulus (MPa) 1000
86
Viscocity (cps at 25c) 400-700
87
88
89
MSDShttps://drive.google.com/open?id=1LLgV7orTDDU5vOMhUIQkvX2dLjG8wAJu
90
91
92
93
94
95
96
97
98
99
100