Mellow Kit Vz330 Essential parts

	A	B	C	D	E	F	G	H	I
1	Essential parts
2	Section	Name	Amount	Weight		Pricing
3
4	Frame					Constants
5		Spacer Feet	4	10.7			Name	Value	Unit
6		Feet	4	173.6			Wear Rate	0.5	€/hour
7		2020 Endcap	8	11.4			Electricity	18	ct/hour
8		Frame_brace	2	102.9			Machine Cost Per Month	75	€
9		Cable holder frame Side	1	10.88			Printing hours per day	15	hour
10		Handle	2	72.2			Printing days per week	5	days 1-7
11	Gantry						Printing hours per month	300	hour
12		Y gantry tube spacers	4	1			Price Printer	1500	€
13		CF tube ends	2	10.9			Pay off per Month	10	%
14		X limit switch stopper	1	1			Pay off per Month per Print	0.5	€/hour
15	Rear Motor Mounts
16		spacer frame side	2	6.8			Object Weight Ratio	1.3	Ratio
17		spacer inner side	2	6.6			Win Margin	135	%
18		Tension adjustement knob	2	5.5			Base Price	10	€
19		knob cap	2	1.1
20	Front Motor Mounts						Machine Rate	1.18	€/hour
21		Spacers	2	3.2
22	Z-Assembly
23		Bed level adjustment knobs	4	1.2
24		Z-chain mount	1	5.9
25	PrintHead						Material Cost	110.57	€
26		X end stop switch mount	1	0.9			Machine Printing Cost	59.00	€
27		cable holder	1	1.2
28		fan duct lower Goliath Long	1	10			Raw Cost	179.57
29		fan duct lower Goliath spacers	2	1			Win	62.85
30		fan duct upper	1	5.6	23.15mm Tall
31		upper duct mount	1	2.5			COST	242.43	€
32		upper duct cpap c clamp	1	1
33		Goliath 2510 fan duct	1	3.1		All Allowed brands / Filament / Settings can be found here:
34		Belt Clips	4	2.3		Filaments
35	Electronics
36		CPAP controller board mounting plate	1	6.8		Variables
37		CPAP fan mount	1	10.5		Name	Value	Unit
38		CPAP fan outlet	1	3.2		Filament Cost	75	€/kg	Fillament kost per KG goes here.
39		Lower Grill right with powerswitch	1	56.4		Object Weight	1134.1	Grams	Weight of the prints goes here.
40		Lower Grill left	1	48.1		Print hours	50	hour	Amount of time spend on the print goes here.
41		Super8 +5160 mount	1	64.25
42		Super8 din mount	2	6.85
43		5160 fan cover	1	19.1		Object Ratio	Printability of material.		Depending on the material you useyou put the ratio in the object weight ratio tab.
44		knobs	4	12.5		Filament	Ratio
45		Vz330 logo plate	1	18.03		PLA	1
46		Pi mount	1	4.5		PETG	1.1
47		Din mount Pi	1	5		ABS/ASA	1.2
48	Front Screen					PC	1.4
49		Screen mount back	1	11		PC CF	1.3
50		Screen mount frame	1	5.9		PPS CF	1.5
51		Screen front cover	1	30.85
52
53	Front door hinges
54		Front door hinge part1	4	22.3
55		Front door hinge part2	4	24.6
56		Logo insert	4	2.6
57	Door latches
58		Door latch Body bottom Left	1	4.8
59		Door latch body bottom right	1	4.8
60		Door latch body top left	1	4.8
61		Door latch body top right	1	4.8
62		Latch top left and bottom right	2	2
63		Latch top right and bottom left	2	2
64		Lever top left and bottom right	2	1.5
65		Lever top right and bottom left	2	1.5
66	Trim covers
67		Front door lower stopper	1	16.95
68		Top cover front handle	2	17
69		Trim Top cover Corner	4	3.5
70		Trim Top cover lower side corner	4	52.52
71		Trim center	16	23
72		Trim side pannel corner trim	8	23
73	Grommets
74		Grommet_slotted_TPU	2	2.8
75		Stepper_Cable_grommet_TPU	3	1.4
76	Chamber circulation
77		Enclosure recirculation fan	1	6.7
78	Tophat Hinges
79		Hinge_spacer_1mm	2	2.6
80		Left Bottom	1	12.83
81		Left middle	1	8.3
82		Left top	1	21.42
83		Right Bottom	1	12.9
84		Right Middle	1	8.3
85		Right Top	1	21.42
86	Allignment tools
87		Z allignment tool 10mm Rod	2
88		MGN12 Allignment Tool	2	13
89		MGN9 Allignment tool	2	13.3
90		X Allignment Tool	2	42
91
92
93
94
95
96
97
98
99
100