| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Module | Description | Subsection | Default value | New value | Status | Notes/sources | ||||||||||||
2 | ACSM | Seat-belt reminder sound off | 3001 > SBR-PreWarning_Fahrer (driver) | active = 01 | nicht_aktiv | OK | |||||||||||||
3 | 3001 > SBR-PreWarning_Beifahrer (passenger) | active = 01 | nicht_aktiv | ||||||||||||||||
4 | Seat-belt reminder lights off | 3001 > Gurtzustandsanzeige_Beifahrer (driver) | active = 01 | nicht_aktiv | |||||||||||||||
5 | 3001 > Gurtzustandsanzeige_Fahrer (passenger) | active = 01 | nicht_aktiv | ||||||||||||||||
6 | Welcome gong disabled | 3001 > Initialwarnung | active = 01 | nicht_aktiv | Disable pedestrian detection? | ||||||||||||||
7 | |||||||||||||||||||
8 | |||||||||||||||||||
9 | BDC_BODY | Close windows and fold-in side mirrors with medium press of lock button on key fob; short press of unlock button unfolds mirrors | 3056 > KOMFORTSCHLIESSUNG_FB | aktiv; werte = 00 | |||||||||||||||
10 | 3056 > KOMFORTSCHLIESSUNG_PA | aktiv | |||||||||||||||||
11 | 3056 > KOMFORT_SCHLIESSEN | Wert_01 | Set to 00 to close immediately | ||||||||||||||||
12 | 3110 > ASP_BEIKLAPPEN | Set to: aktiv | |||||||||||||||||
13 | 3110 > ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN | werte = 01 | |||||||||||||||||
14 | 3110 > ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN | werte = 01 | |||||||||||||||||
15 | Cabin preconditioning assigned to fourth button (with red panic symbol) on key fob | 30D0 > RC_DEFAULT_IDG_4TH_BUTTON_LONG | werte 03 = panic alarm | werte 07 = precondition cabin | Cools or heats cabin depending on ambient temperature | ||||||||||||||
16 | Open frunk assigned to third button | 30D0 > RC_DEFAULT_IDG_3TH_BUTTON_LONG | werte 02 = trunk | werte 05 = frunk | |||||||||||||||
17 | Change triple-blink count | 3068 > BLINKZYKLEN_ANZAHL_TIPP | werte 02 (3 blinks) | werte 03 (4 blinks) | Inactive after 2015; Changed in 2015 MY | ||||||||||||||
18 | Activate brake-force flashing with hard braking | 3068 > ESS_AKTIVIERBARER_AUSGANG | nicht_aktiv | bremsclicht blinkend | After activation, panic stop causes lamp error on head-unit — "OK" to clear. No restart required. | ||||||||||||||
19 | Enable automatic hazards after panic stop | 30XX > WB_GB_Enable | nicht_aktiv | aktiv | |||||||||||||||
20 | Illuminate door-handle LED in reverse | 3070 > OVT_BEI_REUCKFAHRLICHT | nicht_aktiv | aktiv | |||||||||||||||
21 | Activate rear fog lights | 3068 > NSL_Verbaut | nicht_verbaut | Set to: verbaut | Activates rear fog indicator in instrument display | ||||||||||||||
22 | DIY at | 3064 > Mapping_Nebelschlussl_L_output | Set to: nsl_l | Activates turn-indicator light in bumper, not actual rear-fog light | |||||||||||||||
23 | http://www.mybmwi3.com/forum/viewtopic.php?p=21509 | 3064 > Mapping_Nebelschlussl_L_Function | Set to: nebelschlusslicht | ||||||||||||||||
24 | 3064 > Mapping_Nebelschlussl_R_output | Set to: nsl_r | |||||||||||||||||
25 | 3064 > Mapping_Nebelschlussl_R_Function | Set to: nebelschlusslicht | |||||||||||||||||
26 | Set EcoPro driving mode as default on start | 3221 > PfFesMaster > FesInitMode | werte 03 = Comfort | werte 07 = EcoPro | untested | ||||||||||||||
27 | |||||||||||||||||||
28 | |||||||||||||||||||
29 | BKOMBI | Turns off speed correction and displays actual speed | 3000 > BC_V_KORREKTUR | aktiv | nicht_aktiv | No effect | |||||||||||||
30 | Sets the clock via GPS signal | 3000 > GPS_UHR | nicht_aktiv | aktiv | |||||||||||||||
31 | |||||||||||||||||||
32 | |||||||||||||||||||
33 | HU_NBT | Enable route magnet | 3000 > HMI -> NAVI_ROUTENMAGNET | nicht_aktiv | aktiv | http://www.bimmerfest.com/forums/showthread.php?t=711517&highlight=trip+import | |||||||||||||
34 | Navigation route preview | 3000 > HMI > NAVI_ROAD_PREVIEW | nicht_aktiv | aktiv | |||||||||||||||
35 | Navigation route simulator | 3000 > HMI > NAVI_SCROLLING_ALONG_ROUTE | nicht_aktiv | aktiv | |||||||||||||||
36 | Disable Office function speed lock-out | 3000 > OFFICE_MESSAGES_SPEEDLOCK_CONDITION | aktiv | nicht_aktiv | |||||||||||||||
37 | Add temperature and PSI to tire monitor screen | 3001 > RDC_SAFETY | nicht_aktiv | aktiv | |||||||||||||||
38 | Disable legal disclaimers on navigation screen | 3001 > LEGAL_DISCLAIMER_TIME | kein_ld | ||||||||||||||||
39 | 3001 > MACRO_CAM_LEGALDISCLAIMER | kein_ld | |||||||||||||||||
40 | 3001 > MACRO_NIVICAM_LDISCLAIMER | kein_ld | |||||||||||||||||
41 | Sets the clock via GPS signal | 3000 > SETTINGS_TIME_AUTOMATIC | nicht_aktiv | Navigation | |||||||||||||||
42 | Change triple-blink count | 3069 > PIA_DEFAULT_TIPPBLINKEN | Teppblinken_fuenfmal (02) | New coding change after 2015 MY | |||||||||||||||
43 | |||||||||||||||||||
44 | |||||||||||||||||||
45 | KAFAS2 | Enable high-beam assistant | 3015 > FLA_ON_OFF | FLA_off | FLA_on | No change in regular high beams operation | http://www.bimmerfest.com/forums/showthread.php?t=660719&page=2 | ||||||||||||
46 | HU_NBT | 3000 > HIGH_BEAM_ASSISTANT | nicht_aktiv | aktiv | No change in regular high beams operation | bimmerfest.com/forums/showthread.php?t=644297 | |||||||||||||
47 | BDC? | 3050 > FLA_AUTO_AKTIV | ? | automatisch | Not found | ||||||||||||||
48 | BDC? | 3050 > FLA_ON_OFF | nicht_aktiv | aktiv | Not found | ||||||||||||||
49 | |||||||||||||||||||
50 | |||||||||||||||||||
51 | SAS | Initial following distance for Active Cruise Control | 3000 > C_Abstandsstufe_init | Stufe_4 (4 blocks) | Stufe_2 (1 block) | ||||||||||||||
52 | |||||||||||||||||||
53 | |||||||||||||||||||
54 | Sources | http://f30.bimmerpost.com/forums/showthread.php?t=1020138 | |||||||||||||||||
55 |