CarnyRex Wheelie: Print guide

	A	B	C	D	E	F	G	H	I	J	K
1	CarnyRex Wheelie: Print & Hardware Guide
2	How to use this guide
3	1. Make sure you have the .STL files! You can get them here: https://www.etsy.com/shop/CarnyRex
4	2. Use the table below to organise the gCode for your prints by colour & settings. Unless otherwise specified, parts should come oriented for printing.
5	3. If you are not sure about a setting, or something seems wrong, reach out to: CarnyRex@gmail.com I'd be happy to answer any questions / update this guide.
6	4. After you've printed out everything, go to https://youtu.be/QM8RKyC-nCY to watch the assembly guide!
7	5. Parts will often be updated after release - they will be linked in the "updates" column below
8	Parts				Recommended print settings
9	Part	Quantity	Updates	Pallette	Resolution (mm)	Walls (mm)	Infill	Supports?	Brim?	Slicing/ printing notes	Post processing notes
10	Stock_ring_V2	1	Updated part link	Brass / Gold	0.2	1.2	16%	No	No
11	Stock_mid_V2	1	Updated part link	Wood / Brown	0.2	1.2	16%	Yes	No	- The brim is optional - Make sure not to have too many supports inside the screw holes! You can use minimum support area to control this.
12	Stock_grip	1	N/A	Wood / Brown	0.2	1.2	16%	No	No
13	Stock_shoulder	1	N/A	Wood / Brown	0.2	1.2	16%	No	No	Make sure you get your layer adhesion right! This has alot of weight it has to support at the end.
14	Stock_front	1	N/A	Wood / Brown	0.2	1.2	16%	Yes	Yes
15	Barrel_body	1	N/A	Metal / Grey	0.2	0.8	16%	No	No
16	Barrel_base	1	N/A	Metal / Grey	0.2	0.8	16%	Yes	No	The supports are only necessary for the slot tang at the bottom, they may not be necessary depending on how good your bridging settings are.
17	Barrel_tang	1	N/A	Metal / Grey	0.2	0.8	16%	Yes	No	The end of the tang can warp, try a brim or heavier supports if that happens
18	Butt_cap	1	N/A	Brass / Gold	0.2	0.8	16%	No	No
19	Belt_clip	1	N/A	Brass / Gold	0.2	1.2	16%	Yes	No
20	Key	1	N/A	Brass / Gold	0.2	0.8	16%	No	No
21	Catch_block	1	N/A	Metal / Grey	0.2	0.8	16%	No	No
22	Catch_sear	1	N/A	Metal / Grey	0.2	0.8	16%	No	No
23	Catch_trigger	1	N/A	Metal / Grey	0.2	0.8	16%	Yes	No	You might be able to do these without supports, depending on bridge performance
24	Lock_bridle	1	N/A	Metal / Grey	0.2	0.8	16%	No	No
25	Lock_chainlink	3	N/A	Metal / Grey	0.2	1.2	16%	No	No
26	Lock_cockspring	1	N/A	Metal / Grey	0.2	0.8	16%	No	No
27	Lock_dog_cover	1	N/A	Metal / Grey	0.2	0.8	16%	No	No
28	Lock_dog_jaw_bottom	1	N/A	Metal / Grey	0.2	0.8	16%	Yes	No	You might be able to do these without supports, depending on bridge performance
29	Lock_dog_jaw_top	1	N/A	Metal / Grey	0.2	0.8	16%	Yes	No	You might be able to do these without supports, depending on bridge performance
30	Lock_dog_V2	1	Updated part link	Metal / Grey	0.2	0.8	16%	No	No
31	Lock_pyrite	1	N/A	Metal / Grey	0.2	0.8	16%	No	No
32	Lock_jaw_screw	1	N/A	Metal / Grey	0.2	1.2	16%	No	No
33	Lock_mainspring	1	N/A	Metal / Grey	0.2	1.2	16%	No	No
34	Lock_pan_cover	1	N/A	Metal / Grey	0.2	0.8	16%	Yes	No	Make sure your supports are very light / have a small interface so they are easy to remove. You may be able to get away with no supports.
35	Lock_pan_sear	1	N/A	Metal / Grey	0.2	0.8	16%	No	No
36	Lock_pan_spring	1	N/A	Metal / Grey	0.2	1.2	16%	No	No
37	Lock_pan	1	N/A	Metal / Grey	0.2	0.8	16%	Yes	No
38	Lock_plate	1	N/A	Metal / Grey	0.2	1.2	16%	Yes	No
39	Lock_sear_lever	1	N/A	Metal / Grey	0.2	1.2	16%	No	No
40	Lock_sear	1	N/A	Metal / Grey	0.2	1.2	16%	No	No
41	Lock_spindle	1	N/A	Metal / Grey	0.2	1.2	16%	No	No
42	Lock_wheel	1	N/A	Metal / Grey	0.2	0.8	16%	No	No
43	Rail_bottom	1	N/A	Metal / Grey	0.2	0.8	16%	No	No
44	Rail_head	1	N/A	Metal / Grey	0.2	0.8	16%	No	No
45	Rail_top	1	N/A	Metal / Grey	0.2	0.8	16%	No	No
46	Ramrod_guide_front	1	N/A	Brass / Gold	0.2	0.8	16%	No	No
47	Ramrod_guide_back	1	N/A	Brass / Gold	0.2	0.8	16%	No	No
48	Ramrod_head	1	N/A	Brass / Gold	0.2	0.8	16%	No	No
49	Ramrod	1	N/A	Wood / Brown	0.2	0.8	16%	No	Yes
50	Butt_ring_holder	1	N/A	Brass / Gold	0.2	0.8	16%	No	No
51	Butt_ring	1	N/A	Brass / Gold	0.2	0.8	16%	No	No
52	Trigger_guard	1	N/A	Brass / Gold	0.2	0.8	16%	No	No
53	M5 x 10mm (Pan head, Slot)	11	N/A	N/A	N/A	N/A	N/A	N/A	N/A	These are for desperate people without access to real screws - Some people have assembled it correctly with these, but I don't rate it the best solution :P
54	M5 x 20mm (Pan head, Slot)	6	N/A	N/A	N/A	N/A	N/A	N/A	N/A	These are for desperate people without access to real screws - Some people have assembled it correctly with these, but I don't rate it the best solution :P
55	M5 x 30mm (Pan head, Slot)	1	N/A	N/A	N/A	N/A	N/A	N/A	N/A	These are for desperate people without access to real screws - Some people have assembled it correctly with these, but I don't rate it the best solution :P
56	M5 x 40mm (Pan head, Slot)	1	N/A	N/A	N/A	N/A	N/A	N/A	N/A	These are for desperate people without access to real screws - Some people have assembled it correctly with these, but I don't rate it the best solution :P
57	M5 x 60mm (Pan head, Slot)	2	N/A	N/A	N/A	N/A	N/A	N/A	N/A	These are for desperate people without access to real screws - Some people have assembled it correctly with these, but I don't rate it the best solution :P
58	1cm X 2cm Steel compression spring	1	N/A	N/A	N/A	N/A	N/A	N/A	N/A
59	0.5cm X 1cm Steel compression spring	1	N/A	N/A	N/A	N/A	N/A	N/A	N/A
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100