ABCDEFGHIJKLMNOPQRSTUVWXYZAAABACADAEAF
1
v09.05.24
2
INVOICE
3
4
Number
5
6
Sup'r ClimbingDate
7
www.suprclimbing.com
Sup'r #
8
gautier@suprclimbing.com
Customer #
9
Due Date
10
12
13
INVOICE ADDRESSDELIVERY ADDRESS
14
Company NameCompany Name
15
AddressAddress
16
PostcodePostcode
17
CityCity
18
CountryCountry
19
VATContact name
20
PhonePhone
21
EmailEmail
22
23
24
TypeSetsVolumes or holds Price
25
ICE Plates00 - €
26
Discount0% - €
27
Fiberglass/GRP DUAL00 - €
28
Discount0% - €
29
Fiberglass/GRP CLASSIC00 - €
30
Discount0% - €
31
Holds PU00 - €
32
Discount0% - €
33
Woods DUAL00 - €
34
Discount0% - €
35
Woods CLASSIC00 - €
36
Discount0% - €
37
Vis
38
Subtotal after discount
 - €
39
Transport - €
40
VAT0% - €
41
TOTALincoterm (EXW) - €
42
43
If order is <10k€, 100% deposit required upfront for order confirmation.
44
If order is >10k€, 50% deposit required upfront for order confirmation & remaining amount before delivery.
45
46
Payment information (Wise Bank Europe):
Product origin:
47
Account name : SUP R CLIMBING
HS-CODE: 9506 99 90
48
SWIFT/BIC : TRWIBEB1XXX
The exporter of the products covered by this document declares that, except where otherwise clearly indicated, these products are of EUROPEAN UNION (EU) preferential origin.
49
IBAN : BE96 9673 8097 1405
50
Wise Bank's address: Avenue Louise 54, Room S52, Brussels 1050, Belgium
51
52
- Discount for early payment: 0%.
53
- In case of late payment, a penalty equal to 3 times the legal interest rate will be payable (Decree 2009-138 of February 9, 2009).
54
- For professionals, a minimum flat fee of 40 euros for collection costs will be payable (Decree 2012-1115 of October 9, 2012).
55
- Sup'r remains sole owner of the delivered goods until the client has paid 100% the sales price.
56
- By validating an order you agree to respect the technical specifications of use.
57
SUPR'CLIMBING SARL
201 ROUTE DE LYON, 67400 ILLKIRCH-GRAFFENSTADEN, FRANCE
58
Siret : 91772263900015 - RCS : Strasbourg B 917 722 639 - N° TVA intracom : FR51917722639 - Capital : 2 000,00 €
59
60
61
62
63
64
Specifications
65
1. General Information
Each product should be visually checked before use. Cracks, loose inserts and any defects may compromise the integrity of the product. If such defects are found, the product may need to be replaced or discarded.
Avoid throwing the product as they have not been made for it.
Conduct regular checks of the products which are in use; for example, every month or between each setting of a route that features the products.
2. Fixation
Installation should be made by experienced professionals. Incorrect installation can result in serious injuries.
The product should be placed on a flat wall over its entire surface and must not come out on the edges. Do not fasten to curved walls.
The wall surface must comply with the current standard for climbing walls (DIN EN 12572-1) or boulder walls (DIN EN 12572-2).
The product should be installed the right side up and not inverted. In other words, the textured/dual texture must be visible, and the product’s unpainted side must either be against or facing the wall.
Impact drivers should not be used on the products. Use normal drill mode - and not hammer mode - with torque of 5-10Nm.
The product has been designed with mounting holes and all of them must be used when setting. We suggest using 4.5x50mm or 4.5x60mm screws. The mounting screws must fully penetrate the climbing wall with a full thread. The screws must be installed as perpendicular to the wall as possible.
Do not over-tighten the volumes, and check for correct fastening.
No old holes may be used for new screw installation on the climbing wall.
Re-tightening may be necessary at certain intervals due to high dynamic loads.
3. Use
The products are designed for indoor use. Outdoor use may reduce the product life span and cause the colors to fade more quickly. Warranty does not apply for outdoor use.
Scratches, grazes, scrapes and color changes to the product do not constitute hazards.
Screwing holds on the product is at your own risk. Neither Sup’r nor manufacturers would be liable if a setter or user fails to comply with these instructions.
Impacts will reduce the Integrity of volumes and will lead to texture damage over time. The client is responsible for making cosmetic & structural repairs on their wooden volumes if they have been badly handled and show impacts.
4. Cleaning
The products should be cleaned at regular intervals. Clean only with water or special cleaning products for holds. Do not use cleaning chemical solutions without testing before.
If using a high-pressure water jet, keep water temperature below 40°C (100°F). It is imperative to maintain a minimum distance of 35-40cm (14-16in) between the nozzle and the product, otherwise the pressure of the water can potentially damage the surface of the product.
5. Care and Storage
Handling with care can result in a longer life span.
Store the products carefully in a dry place between 5° - 40°C (40° - 100°F).
Volumes can be stacked only with protection between them in order to maintain a quality coating. Avoid direct contact between volumes.
Falls and non-conforming storage can result in visible scratches or other serious damage to the products. Products will not be replaced due to non-conforming storage.
6. Warranty and Replacement
Compliance with these instructions is a basic requirement for safe use of the products, and warranty application.
The products may not be replaced independently.
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101