| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | AA | AB | AC | AD | AE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Timestamp | Start Time | Finish Time | Project Title | FULL Name | Laser Run Time (TOTAL for ALL copies | How many COPIES did you make? | Was the Machine CLEAN when you STARTED? | Describe the problem with the DIRTY Machine? | Did you CLEAN the Machine AND the Work Area when you FINISHED? | What MATERIAL did you use? | What THICKNESS? | Did you use CUTTING? | Cutting Power | Cutting Speed | Cutting Number of Passes | Did you use ENGRAVING? | Engraving Power | Engraving Speed | Engraving Number of Passes | Engraving Scan Gap | Results | Project Notes | Machine Notes | Software Notes | ||||||
2 | 4/29/2022 13:17:48 | 4/29/2022 13:00:00 | 4/29/2022 13:01:00 | Initial Log Entry | Nate Caine | 1 | 1 | No | rails not cleaned, many spots | No | OTHER | Surface Engrave ONLY | No | No | Success | Will review with previous user the cleaning expectations. | |||||||||||||||
3 | 4/30/2022 19:28:10 | 4/30/2022 17:00:00 | 4/30/2022 19:30:00 | MOM Key Chain | Nadeen Hathaway | 30 | 5 | Yes | Yes | Plywood | 5 mm | Yes | 50 | 50 | 1 | Yes | 400 | 200 | 200 | 200 | Success | Saved file on computer under user folder (MOM) Need to duplicate rows | |||||||||
4 | 5/2/2022 21:19:08 | 5/2/2022 19:00:00 | 5/2/2022 21:15:00 | Bridesmaid Boxes | Chris Wilcoxson | 45 | 4 | Yes | Yes | MDF (Medium Density Fibreboard) | 6 mm (1/4") | Yes | 80 | 10 | 1 | Yes | 20 | 20 | 1 | 0.175 | Success | Some shadowing noticed in middle of machine bed | |||||||||
5 | 5/3/2022 20:01:08 | 5/3/2022 18:15:00 | 5/3/2022 19:40:00 | Machine Maint for Shadow Problem | Nate Caine | 5 | 10 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 30 | 20 | 1 | No | Success | Reports of "shadow lines" could not be replecated. Attempted all 9 locations. At 50%/20mm/s on 3mm plywood. Also at 80%/10mm/s on mdf, plywood and acrylic. All edges were fine with no ghosts. | |||||||||||||
6 | 5/4/2022 13:30:04 | 5/4/2022 10:30:00 | 5/4/2022 13:30:00 | Nixie Clock Case | Stephen Savage | 180 | 8 | Yes | Yes | Plywood | 4 mm | Yes | 95 | 3 | 1 | No | Success | Sanded plywood from Home Depot is quite variable in hardness. Some cuts were better. | |||||||||||||
7 | 5/4/2022 19:48:57 | 5/4/2022 19:15:00 | 5/4/2022 19:45:00 | Bridesmaid Boxes | Chris Wilcoxson | 10 | 2 | Yes | Yes | Softwood (Balsa, Basswood, Pine) | 6 mm (1/4") | No | Yes | 30 | 30 | 1 | 150 | Success | |||||||||||||
8 | 5/5/2022 21:44:58 | 5/5/2022 21:39:00 | 5/5/2022 21:43:00 | name tag | Wade Mason | 3 | 1 | No | rails not cleaned | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 60 | 10 | 1 | Yes | 30 | 200 | 1 | 1 | Success | |||||||||
9 | 5/11/2022 21:05:13 | 5/11/2022 19:00:00 | 5/11/2022 21:00:00 | Infinity Markers mdf and acrylic | Andrew Capuno | 50 | 3 | Yes | Yes | MDF (Medium Density Fibreboard) | 3 mm (1/8") | Yes | 50 | 5 | 5 | Yes | 50 | 150 | 2 | 0.5 | Success | ||||||||||
10 | 5/12/2022 17:56:22 | 5/12/2022 16:00:00 | 5/12/2022 18:00:00 | Horse Portraits | Hannah Barker (Eric Ose) | 120 | 6 | Yes | Yes | Wood | 6 mm (1/4") | No | Yes | 60 | 300 | 1 | 0.11 | Success | |||||||||||||
11 | 5/13/2022 1:07:52 | 5/12/2022 11:00:00 | 5/12/2022 11:30:00 | Golf Foam Insert | Lavell D | 7 | 6 | Yes | Yes | Foam Core (Non-PVC) | 6 mm (1/4") | Yes | 90 | 10 | 1 | No | Success | ||||||||||||||
12 | 5/14/2022 14:47:18 | 5/14/2022 12:00:00 | 5/14/2022 14:50:00 | Clock Case | Stephen Savage | 120 | 8 | Yes | Yes | Plywood | 4 mm | Yes | 100 | 3 | 1 | No | Conditional Success | Some harder areas faled to cut all the way through, but could be separated with an exacto knife. | |||||||||||||
13 | 5/23/2022 12:55:34 | 5/23/2022 11:30:00 | 5/23/2022 0:30:00 | Acrylic award | Jot Powers | 20 | 3 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 60 | 10 | 1 | Yes | 30 | 200 | 1 | 0.1 | Fail | There were X axis shifts during the engraves. I tried different parts of the machine and also tried lowering the engrave speeds from 200 down to 100. Still happened. Not in the same place every time. Red tagged the system and left the failure examples in the machine with notes. | |||||||||
14 | 5/24/2022 21:58:12 | 5/24/2022 19:00:00 | 5/24/2022 22:00:00 | Qr Code Cards | Axel Olson | 2 | 35 | Yes | Yes | Anodized Aluminum | Surface Engrave ONLY | No | Yes | 50 | 50 | 1 | 140 | Success | none | none | |||||||||||
15 | 5/25/2022 11:16:59 | 5/25/2022 10:45:00 | 5/25/2022 11:15:00 | Clock faceplate | Stephen Savage | 30 | 1 | Yes | Yes | Hardwood (Cherry, Alder, Walnut, Poplar) | 6 mm (1/4") | Yes | 100 | 4 | 1 | No | Success | ||||||||||||||
16 | 5/29/2022 8:19:25 | 5/28/2022 15:00:00 | 5/28/2022 15:01:00 | Machine Check | Nate Caine | 1 | 1 | No | rails not cleaned, many spots | No | OTHER | Surface Engrave ONLY | No | No | Success | Need to review, again, the cleaning requirements with the previous user. Habitual problem. | |||||||||||||||
17 | 6/14/2022 21:18:05 | 6/14/2022 21:00:00 | 6/14/2022 21:14:00 | dINO SIGNS | Mariah Heck | 6 | 3 | Yes | Yes | Plywood | 5 mm | Yes | 80 | 10 | 1 | Yes | 50 | 150 | 1 | 0.175 | Success | ||||||||||
18 | 6/16/2022 22:15:25 | 6/16/2022 19:00:00 | 6/16/2022 21:55:00 | Laser Class | Eric Ose | 7 | 6 | No | needed some isopropyl alcohol to clean | Yes | Plywood | 3 mm (1/8") | Yes | 60 | 10 | 1 | Yes | 50 | 300 | 1 | 0.15 | Success | |||||||||
19 | 6/17/2022 23:33:19 | 6/17/2022 16:00:00 | 6/17/2022 23:00:00 | Plaque | Tim M | 60 | 2 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 65 | 10 | 1 | Yes | 45 | 400 | 1 | 0.085 | Success | ||||||||||
20 | 6/18/2022 13:49:23 | 6/18/2022 12:44:00 | 6/18/2022 13:44:00 | spell effects | Wade Mason | 20 | 1 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 80 | 100 | 1 | Yes | 35 | 100 | 1 | 0.15 | Success | ||||||||||
21 | 6/21/2022 20:58:19 | 6/21/2022 20:00:00 | 6/21/2022 21:30:00 | Acrylic plates | Mariah Heck | 20 | 5 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 5 mm | Yes | 85 | 10 | 2 | No | Conditional Success | Still needed to snap the pieces out of the sheet at the end | |||||||||||||
22 | 6/22/2022 21:48:47 | 6/22/2022 20:00:00 | 6/22/2022 21:45:00 | Peg board display | Nadeen Hathaway | 1 | 1 | Yes | Yes | MDF (Medium Density Fibreboard) | 5 mm | Yes | 100 | 5 | 2 | No | Fail | Test runs of smaller surface areas first | |||||||||||||
23 | 6/24/2022 18:49:58 | 6/24/2022 17:00:00 | 6/24/2022 18:00:00 | stuff | tim m | 45 | 1 | No | wood resin on slats | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 50 | 10 | 1 | Yes | 50 | 400 | 1 | 0.08 | Success | |||||||||
24 | 6/25/2022 20:44:39 | 6/25/2022 19:00:00 | 6/25/2022 19:30:00 | thing | Tim M | 30 | 2 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 50 | 10 | 1 | Yes | 50 | 400 | 1 | 0.08 | Success | ||||||||||
25 | 6/28/2022 20:07:47 | 6/28/2022 19:28:00 | 6/28/2022 20:05:00 | H Box | Mariah Heck | 9 | 2 | Yes | Yes | Plywood | 5 mm | Yes | 80 | 10 | 1 | Yes | 50 | 150 | 1 | 0.175 | Conditional Success | Didn't quite cut all the way through | |||||||||
26 | 6/29/2022 21:18:19 | 6/29/2022 19:30:00 | 6/29/2022 21:15:00 | Stamp Logo | Ronald Lyons | 20 | 9 | Yes | Yes | Rubber, Rubber Stamp | 3 mm (1/8") | No | Yes | 100 | 70 | 2 | 400 | Success | bring good files protip | ||||||||||||
27 | 7/5/2022 14:15:48 | 7/5/2022 14:00:00 | 7/5/2022 21:15:00 | bracket | Tim M | 15 | 4 | No | residue on rails | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 65 | 10 | 1 | No | Success | |||||||||||||
28 | 7/6/2022 21:43:06 | 7/6/2022 19:30:00 | 7/6/2022 10:00:00 | Ingus talisman | Ron Lyons | 120 | 5 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 100 | 75 | 1 | Yes | 100 | 75 | 2 | 0.05 | Success | ||||||||||
29 | 7/10/2022 17:13:11 | 7/10/2022 13:00:00 | 7/10/2022 16:30:00 | Laser Certification Class | Eric Ose | 24 | 6 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 60 | 10 | 1 | Yes | 40 | 200 | 1 | 0.08 | Success | ||||||||||
30 | 7/13/2022 21:32:44 | 7/13/2022 19:15:00 | 7/13/2022 21:30:00 | Ingus tags | Ron Lyons | 40 | 3 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 60 | 20 | 1 | Yes | 40 | 75 | 1 | 0.08 | Success | At first did not succeed in cutting because we are idiots. and by that I mean we had the units in inches. switching that to mm allowed us to put in the settings correctly and work perfectly fine. | |||||||||
31 | 7/13/2022 21:38:05 | 7/13/2022 21:30:00 | 7/13/2022 21:45:00 | Foam board dinosaur | Spencer Smith | 6 | 1 | Yes | Yes | Foam Core (Non-PVC) | 5 mm | Yes | 65 | 100 | 1 | No | Success | ||||||||||||||
32 | 7/15/2022 16:11:42 | 7/15/2022 15:30:00 | 7/15/2022 16:00:00 | beater | Tim M | 3 | 3 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 65 | 10 | 1 | No | Success | ||||||||||||||
33 | 7/18/2022 19:24:17 | 7/16/2022 15:06:00 | 7/16/2022 15:22:00 | ghost trap | Nate G | 16 | 3 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 10 | 60 | 1 | No | Success | Eric Ose helped with this | |||||||||||||
34 | 7/18/2022 20:27:28 | 7/18/2022 19:15:00 | 7/18/2022 20:30:00 | Wingdings | Ronald Lyons | 15 | 3 | Yes | Yes | Plywood | 5 mm | Yes | 80 | 10 | 1 | Yes | 25 | 150 | 1 | 400 | Success | ||||||||||
35 | 7/21/2022 21:31:53 | 7/21/2022 19:00:00 | 7/21/2022 21:35:00 | Laser Class | Eric Ose | 17 | 5 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 60 | 10 | 1 | Yes | 40 | 200 | 1 | 0.08 | Success | ||||||||||
36 | 7/25/2022 16:00:09 | 7/25/2022 14:45:00 | 7/25/2022 15:56:00 | printing plate | Darrell Wertz | 33 | 1 | Yes | Yes | Rubber, Rubber Stamp | 1 mm | No | Yes | 50 | 150 | 2 | 0.08 | Success | |||||||||||||
37 | 7/27/2022 21:27:30 | 7/27/2022 19:30:00 | 7/27/2022 21:30:00 | Skelepops | Ronald Lyons | 40 | 4 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 75 | 10 | 1 | Yes | 75 | 400 | 2 | 200 | Success | ||||||||||
38 | 8/3/2022 21:33:55 | 8/3/2022 20:45:00 | 8/3/2022 21:36:00 | Acrylic Panel Cut/Engrace | Anthony Rico | 40 | 6 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 6 mm (1/4") | Yes | 95 | 15 | 2 | Yes | 50 | 400 | 1 | 0.15 | Success | ||||||||||
39 | 8/6/2022 15:34:27 | 8/6/2022 15:00:00 | 8/6/2022 3:30:00 | Fabric Cutting | Mark Sawicki | 1 | 0 | Yes | Yes | OTHER | 1 mm | Yes | 24 | 50 | 1 | No | Conditional Success | ||||||||||||||
40 | 8/8/2022 20:39:31 | 8/8/2022 19:20:00 | 8/8/2022 20:30:00 | Acrylic Logo Cards | Anthony Rico | 50 | 12 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 80 | 15 | 1 | Yes | 45 | 200 | 1 | 0.1 | Success | ||||||||||
41 | 8/8/2022 22:01:24 | 8/8/2022 20:40:00 | 8/8/2022 22:00:00 | Acrylic Case Insert Cut | Anthony Rico | 55 | 10 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 6 mm (1/4") | Yes | 95 | 15 | 2 | Yes | 50 | 300 | 1 | 0.1 | Success | Laser may need alignment. I had ghosting on the left side of the cut. The acrylic was positioned at about the second support rail from the left. There was only ghosting on that edge and about two inches to the right, no ghosting on the right side. | |||||||||
42 | 8/10/2022 19:46:49 | 8/10/2022 19:00:00 | 8/10/2022 19:40:00 | cactus keychains | ANGEL COTTON | 3 | 3 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 2 mm | Yes | 80 | 10 | 1 | Yes | 30 | 10 | 1 | 0.08 | Success | ||||||||||
43 | 8/10/2022 21:26:17 | 8/10/2022 20:00:00 | 8/10/2022 21:30:00 | Keychaines | Nadeen Hathaway | 2 | 2 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 2 mm | Yes | 50 | 20 | 1 | No | Success | four anchor points to make sure file is lined up before cut | |||||||||||||
44 | 8/12/2022 22:24:19 | 8/12/2022 19:00:00 | 8/12/2022 22:00:00 | Laser Certification Class | Eric Ose | 24 | 6 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 60 | 10 | 1 | Yes | 45 | 200 | 1 | 0.08 | Success | ||||||||||
45 | 8/14/2022 17:38:08 | 8/14/2022 14:00:00 | 8/14/2022 17:00:00 | Laser Certification Class | Eric Ose | 24 | 6 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 60 | 10 | 1 | Yes | 45 | 200 | 1 | 0.08 | Success | ||||||||||
46 | 8/14/2022 17:40:24 | 8/14/2022 16:30:00 | 8/14/2022 17:00:00 | Couple Artwork | Eric Ose | 12 | 1 | Yes | Yes | Plywood | 6 mm (1/4") | Yes | 75 | 10 | 1 | Yes | 60 | 400 | 1 | 0.15 | Success | ||||||||||
47 | 8/16/2022 12:12:23 | 8/16/2022 11:00:00 | 8/16/2022 12:00:00 | 4H Tag | David Flores | 15 | 5 | Yes | Yes | Plywood | 6 mm (1/4") | Yes | 60 | 10 | 1 | No | Success | ||||||||||||||
48 | 8/17/2022 22:20:32 | 8/17/2022 21:20:00 | 8/17/2022 22:19:00 | bin bot | Gabe Finke | 10 | 4 | Yes | No | Plywood | 4 mm | Yes | 100 | 25 | 1 | No | Fail | ||||||||||||||
49 | 8/23/2022 12:07:21 | 8/23/2022 11:29:00 | 8/23/2022 12:05:00 | Case Panel | Anthony Rico | 30 | 5 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 6 mm (1/4") | Yes | 95 | 13 | 2 | Yes | 50 | 300 | 1 | 0.1 | Success | ||||||||||
50 | 8/23/2022 20:40:37 | 8/23/2022 19:40:00 | 8/23/2022 20:40:00 | Stickers | Nadeen hathaway | 2 | 12 | No | Dusty | Yes | Paper | 1 mm | Yes | 40 | 20 | 1 | No | Success | |||||||||||||
51 | 8/24/2022 21:50:09 | 8/24/2022 20:30:00 | 8/24/2022 21:45:00 | Gears | Sam Seidel | 10 | 1 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 1 mm | Yes | 100 | 10 | 1 | No | Fail | didnt quite cut all the way through, might need to make more passes or slow down the speed | none | none | |||||||||||
52 | 8/30/2022 21:38:56 | 8/30/2022 20:30:00 | 8/30/2022 21:30:00 | Moar Geerzz | Sam Seidel | 5 | 1 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 1 mm | Yes | 70 | 30 | 1 | No | Conditional Success | started at 100 power and 10 speed, but raised the speed and lowered the power over time to get correct settings that worked well for us. | dont know if this would be a machine issue, but there are certain parts of the file that skip lines or completely offset some of the gear shapes halfway through the cut. probably gonna just cut one gear at a time next time and see if that fixes the issue. | dont know if this would be a machine issue, but there are certain parts of the file that skip lines or completely offset some of the gear shapes halfway through the cut. probably gonna just cut one gear at a time next time and see if that fixes the issue. | |||||||||||
53 | 8/31/2022 13:13:20 | 8/31/2022 10:15:00 | 8/31/2022 13:15:00 | Dragon Day | Meghan Mitchell | 25 | 1 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 70 | 10 | 1 | Yes | 45 | 300 | 1 | 0.1 | Success | ||||||||||
54 | 8/31/2022 22:09:43 | 8/31/2022 20:30:00 | 8/31/2022 22:00:00 | Strat Pickup flatwork | Matt McDonald | 10 | 10 | Yes | Yes | OTHER | 4 mm | Yes | 70 | 15 | 2 | No | Success | Material is Vulcanized Fiberboard | none | the tolerance on the magnet press git is tight, had to account for 0.3 laser beam thickness | |||||||||||
55 | 9/1/2022 14:57:38 | 9/1/2022 14:00:00 | 9/1/2022 15:00:00 | Art Engraving | Skye Lucking | 25 | 1 | Yes | Yes | Wood | 3 mm (1/8") | No | Yes | 20 | 200 | 1 | 300 | Success | The computer gave a message "Your system is running low on memory. Save your work." or something like that and then shut down. I wasn't in the middle of a job or anything. I had to actually unplug the CPU because trying to hard re-boot it just by pushing the button didn't work. when I plugged in back in and pushed the power button, it worked fine after that. | ||||||||||||
56 | 9/3/2022 19:10:17 | 9/3/2022 14:30:00 | 9/3/2022 15:30:00 | ElizaBot | Eric Ose | 2 | 1 | Yes | Yes | MDF (Medium Density Fibreboard) | 3 mm (1/8") | Yes | 75 | 10 | 1 | No | Success | ||||||||||||||
57 | 9/6/2022 21:53:32 | 9/6/2022 21:30:00 | 9/6/2022 21:50:00 | FliteTest Tiny Trainer | Spencer Smith | 7 | 1 | Yes | Yes | Foam Core (Non-PVC) | 5 mm | Yes | 65 | 100 | 1 | No | Success | ||||||||||||||
58 | 9/7/2022 13:27:24 | 9/7/2022 11:00:00 | 9/7/2022 13:30:00 | Dragon and Mermaid Pendants (large and mini) | Meghan Mitchell | 25 | 8 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 10 | 75 | 1 | Yes | 300 | 65 | 1 | 0.06 | Conditional Success | ghosting on mermaid design but not on dragon design (mermaid was engraved near top of machine rack, dragon near bottom, so might be that) | ghosting depending on location in the machine | ||||||||
59 | 9/10/2022 12:39:14 | 9/10/2022 12:10:00 | 9/10/2022 12:36:00 | Bench Pins | Eric Ose | 3 | 4 | Yes | No | Plywood | Surface Engrave ONLY | No | Yes | 35 | 300 | 1 | 0.06 | Conditional Success | Preview showed an engrave but missed a small area of the engrave. Re-saving the HeatSync Logo and importing again resolved the issue | ||||||||||||
60 | 9/11/2022 13:02:02 | 9/11/2022 12:00:00 | 9/11/2022 13:00:00 | Trim Voron doors | Eric Wood | 2 | 1 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 80 | 10 | 1 | No | Success | ||||||||||||||
61 | 9/14/2022 20:51:34 | 9/14/2022 19:45:00 | 9/14/2022 20:45:00 | Dragon Face | Meghan Mitchell | 21 | 1 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 80 | 10 | 1 | Yes | 45 | 300 | 1 | 0.15 | Success | ||||||||||
62 | 9/14/2022 21:53:12 | 9/14/2022 20:45:00 | 9/14/2022 21:45:00 | Strat Bobbin V 4 | Matt McDonald | 5 | 6 | Yes | Yes | OTHER | 3 mm (1/8") | Yes | 90 | 10 | 1 | No | Success | Fixed a few tolerance issues | none | none | |||||||||||
63 | 9/15/2022 23:22:44 | 9/15/2022 19:00:00 | 9/15/2022 23:11:00 | Stamp Making Class | Eric Ose | 39 | 5 | Yes | Yes | Rubber, Rubber Stamp | 3 mm (1/8") | Yes | 70 | 10 | 1 | Yes | 100 | 70 | 70 | 0.1 | Success | ||||||||||
64 | 9/18/2022 20:49:57 | 9/18/2022 13:00:00 | 9/18/2022 16:00:00 | Laser Certification Class | Eric Ose | 24 | 6 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 10 | 70 | 1 | Yes | 45 | 200 | 1 | 0.08 | Success | ||||||||||
65 | 9/19/2022 19:04:58 | 9/19/2022 16:30:00 | 9/19/2022 17:30:00 | Marvel engraving | David Nawi | 30 | 1 | Yes | No | MDF (Medium Density Fibreboard) | Surface Engrave ONLY | No | Yes | 50 | 300 | 1 | 0.1 | Success | Fill shape on a layer doesn't unfill a different layer | Shadow (from burnt-away material) | None | ||||||||||
66 | 9/19/2022 19:06:09 | 9/19/2022 18:00:00 | 9/19/2022 19:00:00 | Keychain tags | Eric Ose | 8 | 2 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 70 | 10 | 1 | Yes | 45 | 200 | 1 | 0.08 | Success | A couple of us used the machine. It was clean before we started and clean at 7pm when we wrapped up | |||||||||
67 | 9/19/2022 19:11:04 | 9/19/2022 17:30:00 | 9/19/2022 18:00:00 | Simple dinosaur jigsaw | David Nawi | 3 | 1 | No | I had just engraved a previous project | Yes | Plywood | 5 mm | Yes | 70 | 10 | 1 | No | Success | The pieces might be better-fitting if they are already in place? | Ghosting (an engraving line a few mm away from the cut) | |||||||||||
68 | 9/19/2022 22:57:26 | 9/19/2022 21:25:00 | 9/19/2022 22:05:00 | Guardian | Eric Ose | 25 | 1 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 70 | 10 | 1 | Yes | 55 | 300 | 1 | 0.12 | Success | Used Jarvis image option, did adjust the contrast and brightness a bit. | |||||||||
69 | 9/20/2022 21:38:53 | 9/20/2022 19:00:00 | 9/20/2022 21:30:00 | skelepop | Ron Lyons | 40 | 14 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 6 mm (1/4") | Yes | 75 | 10 | 2 | Yes | 50 | 200 | 1 | 400 | Success | ||||||||||
70 | 9/24/2022 13:20:54 | 9/24/2022 12:30:00 | 9/24/2022 13:20:00 | Dog and wayne | Ronald Lyons | 12 | 2 | Yes | Yes | Wood | 6 mm (1/4") | No | Yes | 50 | 200 | 2 | 300 | Success | |||||||||||||
71 | 9/25/2022 20:25:06 | 9/25/2022 13:00:00 | 9/25/2022 17:00:00 | Laser Certification Class | Eric Ose | 24 | 6 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 70 | 10 | 1 | Yes | 45 | 200 | 1 | 0.08 | Success | ||||||||||
72 | 9/26/2022 20:52:01 | 9/26/2022 19:05:00 | 9/26/2022 19:50:00 | small box | Eric Johnson | 15 | 1 | Yes | Yes | MDF (Medium Density Fibreboard) | 3 mm (1/8") | Yes | 50 | 100 | 1 | Yes | 30 | 100 | 2 | 300 | Success | ||||||||||
73 | 9/26/2022 20:55:02 | 9/26/2022 19:50:00 | 9/26/2022 20:45:00 | Logos | John Fielden | 15 | 4 | Yes | Yes | MDF (Medium Density Fibreboard) | 3 mm (1/8") | Yes | 80 | 10 | 1 | Yes | 45 | 250 | 2 | 0.01 | Success | ||||||||||
74 | 9/26/2022 22:39:17 | 9/25/2022 15:00:00 | 9/25/2022 17:00:00 | Tiles | Eric Ose | 5 | 1 | Yes | No | Plywood | 3 mm (1/8") | Yes | 70 | 10 | 1 | Yes | 45 | 300 | 1 | 0.1 | Success | ||||||||||
75 | 9/28/2022 21:52:10 | 9/28/2022 20:00:00 | 9/28/2022 21:25:00 | asphaltum/aluminum test | Addy J. Jennings | 60 | 2 | Yes | Yes | OTHER | Surface Engrave ONLY | No | Yes | 55 | 150 | 4 | 0.085 | tba- step 1 of several | |||||||||||||
76 | 10/1/2022 15:00:39 | 10/1/2022 14:20:00 | 10/1/2022 15:00:00 | Clock-project | Anjelica Guzman | 7 | 1 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 80 | 10 | 1 | No | Success | Some of the pieces did not fully fall out b/c holes were small | good! | good! - Eric helped me because I am not certified | |||||||||||
77 | 10/1/2022 15:41:41 | 10/1/2022 15:00:00 | 10/1/2022 15:40:00 | painted aluminum test | Adam Jennings | 20 | 1 | Yes | Yes | OTHER | Surface Engrave ONLY | No | Yes | 80 | 120 | 2 | 0.085 | Fail | |||||||||||||
78 | 10/4/2022 12:11:11 | 10/4/2022 10:35:00 | 10/4/2022 12:15:00 | Hello Sunshine | Skye Lucking | 20 | 1 | Yes | Yes | MDF (Medium Density Fibreboard) | 3 mm (1/8") | Yes | 70 | 10 | 1 | No | Success | ||||||||||||||
79 | 10/4/2022 13:45:42 | 10/4/2022 12:45:00 | 10/4/2022 13:45:00 | Hello Sunshine on Acrylic Circle | Skye Lucking | 9 | 1 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 1 mm | Yes | 70 | 10 | 1 | Yes | 20 | 160 | 1 | 50 | Success | ||||||||||
80 | 10/4/2022 14:53:25 | 10/4/2022 13:35:00 | 10/4/2022 13:41:00 | Mother and Child stamp | Meghaqn Mitchell | 6 | 1 | Yes | Yes | Rubber, Rubber Stamp | 2 mm | No | Yes | 100 | 70 | 1 | 0.1 | Success | |||||||||||||
81 | 10/5/2022 20:00:33 | 10/5/2022 19:15:00 | 10/5/2022 19:59:00 | aluminum enclosure | Adam Jennings | 20 | 1 | Yes | Yes | OTHER | Surface Engrave ONLY | No | Yes | 100 | 90 | 1 | 0.091 | Fail | |||||||||||||
82 | 10/8/2022 16:12:02 | 10/8/2022 13:00:00 | 10/8/2022 16:00:00 | skeleton buttons | Ronald Lyons | 60 | 320 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 75 | 10 | 1 | No | Success | ||||||||||||||
83 | 10/9/2022 16:55:45 | 10/9/2022 14:00:00 | 10/9/2022 16:50:00 | Laser class | Christine Taylor | 4 | 1 | Yes | Yes | Wood | 5 mm | Yes | 60 | 10 | 2 | Yes | 45 | 200 | 1 | 0.08 | Success | keychains | |||||||||
84 | 10/9/2022 16:58:56 | 10/9/2022 14:00:00 | 10/9/2022 16:56:00 | Laser Class | Melissa Mai | 4 | 1 | Yes | Yes | Wood | 5 mm | Yes | 60 | 10 | 1 | Yes | 45 | 200 | 1 | 0.08 | Success | ||||||||||
85 | 10/10/2022 18:42:30 | 10/10/2022 17:45:00 | 10/10/2022 18:45:00 | 5s Shadow board | Darrell Wertz | 5 | 1 | Yes | Yes | OTHER | Yes | 40 | 20 | 1 | No | Success | |||||||||||||||
86 | 10/10/2022 21:50:58 | 10/10/2022 19:30:00 | 10/10/2022 22:00:00 | skelepop earrings | Ronald Lyons | 45 | 30 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 75 | 10 | 1 | No | Success | ||||||||||||||
87 | 10/12/2022 21:49:51 | 10/12/2022 20:30:00 | 10/12/2022 21:45:00 | Skeleton earrings | ronald lyons | 24 | 32 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 75 | 10 | 1 | No | Success | ||||||||||||||
88 | 10/17/2022 17:17:01 | 10/13/2022 18:30:00 | 10/13/2022 18:45:00 | Acrylic square | Jot Powers | 1 | 1 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 80 | 15 | 1 | No | Fail | Wanted to test cutting speed/power by cutting a small square first. Ran that square and didn't cut through, so increased power and decreased speed and moved slightly to cut a new small square. From there, couldn't get the laser to fire. It would run the pattern, but the laser wouldn't run. Tried restarting the laser, changing settings. Nothing obvious. Gave up and ran it on the big laser. | |||||||||||||
89 | 10/17/2022 18:07:40 | 10/17/2022 17:45:00 | 10/17/2022 18:22:00 | Sigils | Robert Douglass | 42 | 15 | No | Debris left in bottom, slats dirty | Yes | Plywood | 3 mm (1/8") | Yes | 100 | 10 | 1 | Yes | 20 | 100 | 1 | 0.01 | Success | Software update available | ||||||||
90 | 10/17/2022 20:38:54 | 10/17/2022 19:10:00 | 10/17/2022 20:35:00 | Prius A/C Vent Seal | Nate Caine | 3 | 16 | Yes | Yes | OTHER | 2 mm | Yes | 40 | 40 | 1 | No | Success | 2mm Felt (Polyester Cloth) | |||||||||||||
91 | 10/18/2022 13:03:55 | 10/18/2022 23:30:00 | 10/18/2022 13:00:00 | Acrylic Case Inserts | Anthony Rico | 40 | 10 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 6 mm (1/4") | Yes | 95 | 10 | 2 | Yes | 30 | 400 | 1 | 0.1 | Success | ||||||||||
92 | 10/23/2022 18:36:55 | 10/23/2022 14:00:00 | 10/23/2022 17:00:00 | Laser Certification Class | Eric Ose | 12 | 3 | No | a few of the rails had something that required isopropyl to clean. | Yes | Plywood | 3 mm (1/8") | Yes | 70 | 10 | 1 | Yes | 45 | 200 | 1 | 0.08 | Success | |||||||||
93 | 10/25/2022 21:51:50 | 10/25/2022 19:00:00 | 10/25/2022 21:50:00 | jewelry stand | ronald lyons | 20 | 4 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 75 | 10 | 1 | No | Success | ||||||||||||||
94 | 10/26/2022 20:58:15 | 10/26/2022 19:00:00 | 10/26/2022 21:00:00 | Jewelry Stand | Ronald Lyons | 25 | 4 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 10 | 75 | 1 | Yes | 65 | 200 | 1 | 300 | Success | ||||||||||
95 | 10/31/2022 22:06:37 | 10/31/2022 21:30:00 | 10/31/2022 22:04:00 | sonoran souvenirs | Eric Ose | 2 | 1 | Yes | Yes | Plywood | 4 mm | Yes | 80 | 10 | 1 | Yes | 35 | 300 | 1 | 0.1 | Success | ||||||||||
96 | 11/1/2022 13:53:15 | 11/1/2022 11:28:00 | 11/1/2022 13:45:00 | Wearables Case Parts | Anthony Rico | 60 | 8 | Yes | Yes | Acrylic (Plexiglas, Lucite) | 3 mm (1/8") | Yes | 95 | 15 | 1 | Yes | 25 | 300 | 1 | 0.1 | Success | ||||||||||
97 | 11/11/2022 11:10:47 | 11/10/2022 14:35:00 | 11/10/2022 20:30:00 | DMA Stars | Eric Ose | 39 | 52 | No | Rails were dirty unknown stuff, but wiped clean with water. | Yes | Foam Core (Non-PVC) | 4 mm | Yes | 65 | 100 | 1 | No | Success | Only had 1 fire out of the 52 parts. | ||||||||||||
98 | 11/12/2022 14:06:59 | 11/12/2022 9:00:00 | 11/12/2022 12:00:00 | Laser Cutter Certification | Eric Ose | 36 | 9 | Yes | Yes | Plywood | 3 mm (1/8") | Yes | 70 | 10 | 1 | Yes | 45 | 200 | 1 | 0.08 | Success | ||||||||||
99 | 11/17/2022 15:14:03 | 11/17/2022 13:00:00 | 11/17/2022 15:00:00 | Testing engraving settings | Angie Stephens | 21 | 4 | Yes | Yes | Wood | 6 mm (1/4") | Yes | 80 | 5 | 1 | Yes | 300 | 45 | 1 | 0.025 | Success | ||||||||||
100 | 11/19/2022 13:09:50 | 11/19/2022 12:15:00 | 11/19/2022 13:06:00 | Closed Sign | Peter Hicks | 5 | 1 | Yes | Yes | Wood | 3 mm (1/8") | Yes | 80 | 10 | 1 | Yes | 45 | 200 | 1 | 0.08 | Success |