FII-HI - ASP Technical Request Form.xlsx

	A	B	C	D	E	F
1
2
3			TECHNICAL REQUEST FORM
4			TECHNICAL REQUEST FORM
5					FII-HI TAP CHANGER
6
7
8
9	This form is intended for entering the specifications of FII-HI tap changers with 1 or more identical stages, operated by 1 control device.
10
11	If you require a special FII-HI tap changer, for example with 2 or more different stages, operated by 1 or 2 control devices (examples below), send us your specifications.
12
13
14				Example : 1 stage Common output per phase – 3 positions 1 stage Bridge – 3 positions Both operated by 1 single control device
15
16
17
18	CUSTOMER'S NAME
19
20	COUNTRY
21
22
23	Question1	Select the required Max Voltage Um (kV) - test voltages				36 kV. 70 KV / 200 kV
24	"Max Voltage Um (kV). Applied voltage 50Hz/1 min (kV) / Full wave lightning impulse BIL 1.2/50µs (kV)"
25
26
27	Question 2	Electric circuit diagram				Series_Parallel__on_2_windings
28
29
30
31
32
33	Question 3	What is the number of positions?
34	(for the diagrams series-parallel and star-delta, the number of positions is implicitly 2)
35
36
37
38
39
40	Question 4	GROUP OF CONTACTS configuration
41
42		Question 4.1	Group of contacts COUNT per Stage ?			.
43
44
45
46
47		Question 4.2	Stage (Deck) COUNT ?			.
48
49
50
51
52
53	Question 5	RATED CURRENT per Fixed Contact
54	Select the fixed contact reference needed from the drop down list taking into account the following conbinations of characteristics
55
56
57
58
59
60
61	Question 6	LOCATION OF THE CONTROL DEVICE				.
62	The control device can be located on the right or on the left of the tap changer, when switching unit in horizontal position, facing fixed contacts connections
63
64
65
66
67
68	Question 7	PRESENCE OF A BEVEL GEAR / DIRECTION OF THE MOVING BAR
69	By default, the shaft of the control device is perpendicular to the bars and the fixed contacts.
70
71	On request, a bevel gear can be added on the main bracket ; 6 configurations are available according to the location of the contol device
72
73	Does optional bevel gear have to be added on the main bracket ?
74
75
76
77	Question 8	Type of control device ?			.
78
79
80
81
82
83	Question 9	NUMBERING OF THE KNOB				Ba
84
85
86
87
88	OPTIONAL FEATURES - the following questions are about optional features, by default the answer to these questions is NO if you need one of these characteristics choose from the drop-down list
89
90	Question 10	OPTIONAL ANODIC OXIDATION AND PRIMER PAINTING ON OUTSIDE ALUMINIUM PARTS
91
92	Are anodic oxidation and primer painting required for the outside aluminum parts?					NO (by default)
93
94	The previously selected control device. In yellow the areas that would be covered by the anodic oxidation and primer painting:
95
96
97
98	Question 11	OPTIONAL MECHANICAL LOCK WITH MICRO-SWITCH				NO (by default)
99
100