LV Panels List of Tests .xlsx

	A	B	C	D
1	T&C Requirement Compliance Sheet
2	Sr. No.	Test Description	FAT	SAT
3	LV Panels
4	1	Physical inspection and specs. Verification – Verification has to be done with approved GA drawing, SLD, BOQ, method statements.	x	x
5	2	First Megger (Before High Voltage test)	x	x
6	3	High voltage dielectric test - 2.5kV for 01min.	x	y
7	4	Second Megger (Post High Voltage test)	x	y
8	5	Torque test - During FAT all the joint sections on horizontal & vertical bus bar to be verified with torque wrench and to be marked for tightness. During SAT all input / output terminations and busbar joint sections to be verified with torque wrench. Note: Torque values table shall be provided by panel manufacturer.	x	x
9	6	Mili Volt Drop Test: For the panels transported to site in isolated sections, post alignment of such panels onsite horizontal joint sections to be verified using mili volt drop test kit	x	x
10	7	Control Circuit Verification Test	x	y
11	8	CT Test: Polarity & Ratio to be verify.	x	x
12	9	Measuring Instruments: - Parameter to be verify by connecting available load.	x	x
13	10	Switchgears Mechanical / Electrical Operation & Voltage Verification	x	x
14	11	Verification of interlocks (Mechanical / Electrical)	x	x
15	12	Primary injection test for all Breakers - During FAT this test to be done on the rated value of the breaker and during SAT, this test to be done on the set values as per discrimination study.	x	x
16	13	Secondary injection test for Micrologic breakers - During FAT this test to be done and during SAT, this test to be done on the set values as per discrimination study.	x	x
17	14	Verification of BMS interface points	x	x
18
19	Test Instrumentation Required/Considered For SAT
20	Sr. No.	Description	Qty.
21	1	3-Phase Power Quality Analyzer	1 No.
22	2	True RMS Multi-meter	1 No.
23	3	True RMS Clamp meter	1 No.
24	4	Insulation resistance tester (0-1000V)	1 No.
25	5	Phase sequence meter	1 No.
26	6	Digital thermographic scanner	1 No.
27	7	Hi-post test kit (2.5 kV)	1 No.
28	8	Primary injection kit set	1 No.
29	9	Secondary injection kit set	1 No.
30	10	Torque Wrench	1 No.
31	11	Test Lamp Kit	2 Nos.
32	12	Millivolt drop test kit	1 No.
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100