Annex 1：Delta 40W.xlsx

	B	C	D	E	F	G	H	I	J	K
1
2	Material Parameter Reference of AlgoLaser_Delta for 40W for LightBurn
3	Material	image	Speed (mm/min)	Max Power	Min Power	Line Interval	Image Mode	Test Results	Remark	Reference Picture(Parameter setting location)
4	Birch Plywood 桦木胶合板		25000	100%	0	0.1	Grayscale		30% air volume
5	Basswood Plywood 椴木胶合板		30000	100%	0	0.1	Grayscale		30% air volume
6	Eucalyptus plywood 桉木胶合板		30000	50%	0	0.05	Grayscale		30% air volume
7	Pine Board 松木板		25000	100%	0	0.1	Grayscale		30% air volume
8	Paulownia Plank 泡桐木板		30000	100%	0	0.09	Grayscale		30% air volume
9	MDF 中密度板		30000	100%	0	0.1	Grayscale		30% air volume
10	cherry wood 樱桃木		30000	100%	0	0.1	Grayscale		30% air volume
11	Walnut 胡桃木		25000	100%	0	0.1	Grayscale		30% air volume
12	Black Acrylic 黑色亚克力		25000	100%	0	0.1	Grayscale		30% air volume
13	Green Acrylic 绿色亚克力		30000	100%	0	0.1	Grayscale		30% air volume
14	Orange Acrylic 橙色亚克力		30000	100%	0	0.1	Grayscale		30% air volume
15	Blue Acrylic 蓝色亚克力	/	/	/	0	/	Grayscale	/	Blue Light is Absorbed
16	Yellow Acrylic 黄色亚克力		25000	100%	0	0.1	Grayscale		30% air volume
17	Red Acrylic 红色亚克力		30000	100%	0	0.1	Grayscale		30% air volume
18	PolyVinyl Chloride (雪弗板)		30000	50%	0	0.1	Grayscale		10% air volume
19	Gray Cardboard 灰纸板		30000	70%	0	0.1	Grayscale		10% air volume
20	White Cardboard 白纸板		25000	100%	0	0.09	Grayscale		10% air volume
21	Black Cardboard 黑纸板		30000	50%	0	0.1	Grayscale		30% air volume
22	Coated Duplex Board (牛卡纸)		25000	50%	0	0.1	Grayscale		30% air volume
23	Leather 皮革		30000	100%	0	0.1	Grayscale		30% air volume
24	colored paper 彩纸		25000	30%	0	0.1	Grayscale		30% air volume
25	Navy Blue canvas 海军蓝色帆布		25000	50%	0	0.1	Grayscale		30% air volume
26	denim 牛仔裤		28000	100%	0	0.1	Grayscale		30% air volume
27	rubber 橡胶		25000	100%	0	0.1	Grayscale		30% air volume
28	white ABS sheet 白色ABS		/	/	0	/	Grayscale	/	30% air volume
29	black ABS sheet 黑色ABS		25000	100%	0	0.1	Grayscale		30% air volume
30	bamboo 竹子		20000	100%	0	0.1	Grayscale		30% air volume
31	Stainless steel 不锈钢		8000	100%	0	0.05	Grayscale		30% air volume
32	cold rolled sheet 冷轧板		5000	100%	0	0.07	Grayscale		30% air volume
33	coated metal 涂层金属		30000	30%	0	0.1	Grayscale		30% air volume
34	dry leaves 干树叶		30000	70%	0	0.1	Grayscale		30% air volume
35	clear acrylic 透明亚克力		Need to add laser color paper
36	copper 铜		/	/	/	/	/	/
37	gold 金		/	/	/	/	/	/
38	Pure aluminum 纯铝		/	/	/	/	/	/
39	pure iron 纯铁		/	/	/	/	/	/
40
41
42
43	Notice： 1、The results would be different in even same material with different finishing or different colors, So you need to adjust the speed and power rate based on different objects. Also, please adjust the focal length to be the best, make the focal spot to be the smallest. 2、It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or pervious to light, etc. Then, you need to use the marker pen to black it to engrave.
44
45
46
47
48
49
50
51	以上雕刻数据的测试是基于没有灰度过度的位图雕刻的，灰度图的雕刻值要根据实际情况自行调整
52	以上雕刻数据的测试是基于没有灰度过度的位图雕刻的，灰度图的雕刻值要根据实际情况自行调整
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100