A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | AA | AB | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Compiled By Connor Weller for PNW - Open Source COVID19 Medical Supplies group https://helppnwcvd19.com/ | |||||||||||||||||||||||||||
2 | Type of Device | Photos | Name of Device | Cleared by Medical Professional (Y/N) | Important Information | Time to produce Quantity 1 | Link to Main Information | Link to Extra Information | ||||||||||||||||||||
3 | Protective Face Shields | |||||||||||||||||||||||||||
4 | Recomended Design--> | DtM-v3.0 Face Shield PPE, 3D printable headband | Y | design approved by the U.S. Department of Health and Human Services (NIH).This design has undergone review in a clinical setting and is recommended when fabricated as instructed. | 1.5 hours | https://www.prusaprinters.org/prints/27748-dtm-v30-a4-face-shield-ppe-for-covid-19-remix-of-p | https://3dprint.nih.gov/discover/3dpx-013238 | |||||||||||||||||||||
5 | Budmen Face Shield V3 | Y | design approved by the U.S. Department of Health and Human Services(NIH).This design has undergone review in a clinical setting and is recommended when fabricated as instructed. | 3 hours | https://3dprint.nih.gov/discover/3dpx-013309 | |||||||||||||||||||||||
6 | Prusa Protective Face Shield - RC2 | Y | Verified with the Czech ministry of health. | 1.3 hours | https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc2?fbclid=IwAR1GBr-Uzce67bhy-gOv9LyBVZTdiGk46eWM2yGPm7F6JBS3XvVSUPhJhjw | |||||||||||||||||||||||
7 | Prusa Protective Face Shield Cover - RC1 (WIP) | Y | adds to the protection of the RC2 & RC3 | 32 mins | https://www.prusaprinters.org/prints/27318-prusa-protective-face-shield-cover-rc1-wip | |||||||||||||||||||||||
8 | BaselineDesign RC3 Feathered Vertical Protection | Y | Identical to the RC3 but provides proper overhead protection while remaining flexable | 1.3 hours | https://www.prusaprinters.org/prints/27633-baselinedesign-rc3-feathered-vertical-protection | |||||||||||||||||||||||
9 | 3DVERKSTAN Face Shield | Y | Approved by Sweden for use in hospitals. Prints extremely quickly and does not require the use of elastic. | 45 minutes | https://3dverkstan.se/protective-visor/?fbclid=IwAR3rpoRBync4Qcv18A-SB7aOsW5H9wcwndHZBwrFhhg_D700dqa_7S-g7iQ | |||||||||||||||||||||||
10 | ||||||||||||||||||||||||||||
11 | proto shield | N | can be cut in extermly quickly and requires no 3d printing while remaining functionally equivilent to the prusa design | 2 minutes | https://www.protohaven.org/proto-shield/ | |||||||||||||||||||||||
12 | Maker Nexus Prusa Remix | N | remix of the RC2 that provides total overhead protection to the user while remaining compatible with all prusa designs. | 1.5 hours | http://makernexuswiki.com/index.php?title=3D_printed_face_shields | |||||||||||||||||||||||
13 | Same Model as above but modified for users with glasses | N | Prints extremely quickly and does not require the use of elastic. | 46 minutes | https://retrolabs.com/3d-prints/3d-printed-face-shield-with-10-mil-pvc | |||||||||||||||||||||||
16 | 3 Hole punch face shield | N | uses a 3 hole punch instead of a laser so shields can be easily swapped out | 2.5 hours | https://docs.google.com/document/d/198bU3BGrS46gPp95_UiwHmX4Mq-hdlz1rCC9efbDoek/edit?fbclid=IwAR04oPY0_Jgcvf97T-l-Rd68fXnXu-ZaQ_C9LdjrD6eMWikPf97m5t96NoY | |||||||||||||||||||||||
17 | Forehead Add-On for 3D Printed Face Shields | N | provides overhead protection for 3d verkstan | 2 min | https://www.instructables.com/id/Forehead-Add-On-for-3D-Printed-Face-Shields/ | |||||||||||||||||||||||
18 | Positive Pressure protection | |||||||||||||||||||||||||||
19 | Wasp: MY SPACE HELMET | N | Full head protection utilizing an airpump with filter and positive pressure to keep the user safe. | unknown | https://www.3dwasp.com/en/protection-helmet-with-ventilation/ | |||||||||||||||||||||||
20 | Aerosol Box | Y | Covers the patient and provides protection to medical personnel during intubation | unknown | https://sites.google.com/view/aerosolbox?fbclid=IwAR06aNsfxzOsU3GyVPHrB6_VhUUAniZX09kkr2BTmES-ECToH--GTEkKZhI | https://www.facebook.com/bai.w.qiu/videos/10158202094677700/?fref=gs&dti=670932227050506&hc_location=group | ||||||||||||||||||||||
21 | Covid Box | Y | Covers the patient and provides protection to medical personnel during intubation | unknown | https://www.covidbox.org/home | |||||||||||||||||||||||
22 | ||||||||||||||||||||||||||||
23 | Isolation Gowns | information on medical gown certification | ||||||||||||||||||||||||||
24 | Peek-a-boo isolation gown | Y | Handmade gown providing shoulder to ankle protection | unknown | https://www.peekaboopatternshop.com/isolation-gown/?fbclid=IwAR1DkHoXhm4_YPckIAR3eqx_tc7AxgwmyoGq17pTjk6i8OKsdjTsVLW5B1A | |||||||||||||||||||||||
25 | DIY Plastic PPE Gown | Y | This design uses 0.7 mil plastic. We found that thickness optimizes: the cost per gown; being durable enough for single use; being thin enough to allow thumb holes to be punctured before donning gloves; and being flexible enough to be doffed safely. While this gown is closed on the back by default, some providers may prefer to slit the back leaving easy-to-break connections near the neck, waist, or knees to make doffing easier. | 2-4 minutes | https://www.instructables.com/id/DIY-Plastic-PPE-Gown/?fbclid=IwAR1CEzHmgYd4qfliUhsZt0dHs4bnR9QNU6HSlwAkdZi1fekMEPYsJQWGSMA | http://richmond-pediatrics.com/?fbclid=IwAR291j4IVPxAJkOERQtlP5MANUe9tIfUkK1mntcFSB45WfddCDCJOqDpfps | ||||||||||||||||||||||
26 | ||||||||||||||||||||||||||||
27 | N95 Protection | |||||||||||||||||||||||||||
28 | 3DPrinted N95 Shields | N | 3D printed cover for N95 Masks that extends their usable life. | 1.1 hours | https://m.facebook.com/3DPrinted-N95-Shields-110044470631893/ | |||||||||||||||||||||||
29 | ||||||||||||||||||||||||||||
30 | Filtering Masks | |||||||||||||||||||||||||||
31 | MedSHIELD-19 | Y | FOR CUSTOMIZING A SNORKELING MASK INTO A VIRUS PROTECTION MASK | unknown | https://customsurgical.de/en/free-3d-model-for-customizing-a-virus-protection-mask/?fbclid=IwAR0lZYCqw6CXsNZ3Hv0KRnt4T21bT36EXZXz8fy6xvHGw-ANffZJticOLBQ | |||||||||||||||||||||||
32 | 3D PRINTABLE MASK FOR COVID-19 | Y | Developed with a hospital in Billings. Stretches out a single N95 mask into 6. | unknown | https://www.makethemasks.com/make-the-masks | https://longliveyoursmile.com/3d-printable-mask-for-covid-19/ | http://douglasbeck.net/?fbclid=IwAR0vpyN4hGeNPFdJ4ev0oL8jyfr4yzCaBUaX9QR7CIZWVip8_1ymWXAEN8s | |||||||||||||||||||||
35 | sewed masks | Y | fastest way to produce masks | unknow | https://www.weneedmasks.org/sew-a-mask/?fbclid=IwAR09i7ECioN3gWhltbGXmQe3bHiKk7vUpzBBDPK-MFf_scJmLlaSZUmiUpc | |||||||||||||||||||||||
36 | Maker Mask | Y | fully 3D printable NIH approved respirator mask using readily available materials found at your local hardware store, or purchased in bulk. The mask features an easily replaceable HEPA Filter respirator inspired system that allows for re-use in conjunction with common sterilization and sanitation procedures. | unknow | https://www.makermask.com/ | |||||||||||||||||||||||
37 | ||||||||||||||||||||||||||||
38 | Ear Savers | |||||||||||||||||||||||||||
39 | Surgical Mask Tension Release Band for Ear Comfort & Extended Use | Y | Surgical Mask Tension Release Band for Ear Comfort & Extended Use. v2 uses less material for faster printing. Compared to pointed/arrow models, won't get caught in hair.100% for larger heads/hairdos and 85% for average. | unknown | https://3dprint.nih.gov/discover/3dpx-013410?fbclid=IwAR07axagM4emaCR8LSMSQe_eFNiJ_1sORsQD6TOxsqgeTvGyhNAkBkda1eg | |||||||||||||||||||||||
40 | ||||||||||||||||||||||||||||
41 | PAPR | |||||||||||||||||||||||||||
42 | COVID-19 Swim Mask HEPA PAPR | N | affordable and uses commonly availible components. | unknown | https://www.instructables.com/id/COVID-Swim-Mask-HEPA-PAPR/ | |||||||||||||||||||||||
43 | ||||||||||||||||||||||||||||
44 | Last Resort Ventilators | |||||||||||||||||||||||||||
45 | OxyGEN | N | OxyGEN is an automated manual AMBU type ventilator | unknown | https://www.oxygen.protofy.xyz/ | |||||||||||||||||||||||
46 | MIT Emergency Ventilator (E-Vent) Project | N | MIT opensource ventilator | unknown | https://e-vent.mit.edu/ | |||||||||||||||||||||||
47 | ||||||||||||||||||||||||||||
48 | Links to More Resources | |||||||||||||||||||||||||||
49 | N95 shield | https://drive.google.com/drive/folders/1-7AqfcKaGstJ0goRNiYks1Y732DsCLHn?fbclid=IwAR2pNePCFsdCaGXFu9iFPsbj92PeD11D-v8VfpSLRLTh06omOkV7Downy5U | ||||||||||||||||||||||||||
50 | more verified designs and extra linls | https://docs.google.com/document/d/1AiDK_-oWIbhYkBPeulDN_2SXN13PcxBAK9dI4Pf14VY/mobilebasic | ||||||||||||||||||||||||||
51 | in depth resource for creator groups | https://docs.google.com/document/d/1TyorpGMKvI4K__31-ElUeSLgGOwifRqiWh1-UV5LgOk/edit?fbclid=IwAR2fFS5TRDhnUDy9KBpYNL2J4SJTE9OvTarLGD6AfGWedgMTnaV7ZaMafsU | ||||||||||||||||||||||||||
52 | everething fabric ppe | https://www.fabrictempe.com/ppeefforts?fbclid=IwAR2KFLP_1FTdK_EQsNJWUacCMJ2posIe_atb_hV8uEfFJ5RpRIMY5Dp9Mbc | ||||||||||||||||||||||||||
53 | HP resources for 3d printable medical tools | https://enable.hp.com/us-en-3dprint-COVID-19-containment-applications | ||||||||||||||||||||||||||
54 | how to help elsewhere and guidlines on making PPE | https://getusppe.org/makers/ | ||||||||||||||||||||||||||
55 | data base of opensource face shield designs | https://www.diymed.org/ppe/face-shields | ||||||||||||||||||||||||||
56 | NIH approved designs | https://3dprint.nih.gov/collections/covid-19-response | ||||||||||||||||||||||||||
57 | the mask project (fully lasercut) | https://www.maskproject.tech/ | ||||||||||||||||||||||||||
58 | make magazine compilation of projects | https://makezine.com/2020/03/27/make-these-projects-to-fight-covid-19-right-now/ | ||||||||||||||||||||||||||
59 | Global OSCMS group database | https://docs.google.com/spreadsheets/d/1JH5uL3WW6PwvwFRe4wqXkheK0-jcGYqaPmb9J3Dr6Ac/edit#gid=179139280 | ||||||||||||||||||||||||||
60 | Compilation of other efforts helping produce PPE right now | http://3dprintedppe.com/?fbclid=IwAR01s0yasaYXudoSRcnL9DVWqPPvVU2kE0R4uhhwSVDgoJp4IJnTQnfnm5M | ||||||||||||||||||||||||||
61 | ||||||||||||||||||||||||||||
62 | ||||||||||||||||||||||||||||
63 | ||||||||||||||||||||||||||||
64 | ||||||||||||||||||||||||||||
65 | ||||||||||||||||||||||||||||
66 | ||||||||||||||||||||||||||||
67 | ||||||||||||||||||||||||||||
68 | ||||||||||||||||||||||||||||
69 | ||||||||||||||||||||||||||||
70 | ||||||||||||||||||||||||||||
71 | ||||||||||||||||||||||||||||
72 | ||||||||||||||||||||||||||||
73 | ||||||||||||||||||||||||||||
74 | ||||||||||||||||||||||||||||
75 | ||||||||||||||||||||||||||||
76 | ||||||||||||||||||||||||||||
77 | ||||||||||||||||||||||||||||
78 | ||||||||||||||||||||||||||||
79 | ||||||||||||||||||||||||||||
80 | ||||||||||||||||||||||||||||
81 | ||||||||||||||||||||||||||||
82 | ||||||||||||||||||||||||||||
83 | ||||||||||||||||||||||||||||
84 | ||||||||||||||||||||||||||||
85 | ||||||||||||||||||||||||||||
86 | ||||||||||||||||||||||||||||
87 | ||||||||||||||||||||||||||||
88 | ||||||||||||||||||||||||||||
89 | ||||||||||||||||||||||||||||
90 | ||||||||||||||||||||||||||||
91 | ||||||||||||||||||||||||||||
92 | ||||||||||||||||||||||||||||
93 | ||||||||||||||||||||||||||||
94 | ||||||||||||||||||||||||||||
95 | ||||||||||||||||||||||||||||
96 | ||||||||||||||||||||||||||||
97 | ||||||||||||||||||||||||||||
98 | ||||||||||||||||||||||||||||
99 | ||||||||||||||||||||||||||||
100 | ||||||||||||||||||||||||||||
101 | ||||||||||||||||||||||||||||
102 | ||||||||||||||||||||||||||||
103 | ||||||||||||||||||||||||||||
104 |