3Built-Wiring-Recommendations
 Share
The version of the browser you are using is no longer supported. Please upgrade to a supported browser.Dismiss

View only
 
 
ABCDEFGHIJKLMNOPQRSTUVWXYZ
1
www.3built.com

© 2019 3Built LLC
2
MakeYearModelOEM Switch TypeOEM Wire ColorAttach MethodRecommended RES UnitVehicle with factory 12V batteryNotes
3
Artic Cat1989Kitty CatNormally OpenSpliceRES6VXFALSETo connect the RES6VX you would splice the RES's Blue wire to Brown wire coming from the On/Off switch and the splice the RES's Green wire to the Black wire coming from the On/Off switch. Alternatively you can also connect to both wires coming from the Kitty Cat's emergency switch which also has the Brown and Black wires. Use which ever switch is more easily accessible.
4
Artic CatUnknown50ccNormally OpenBlack with White tracerSpliceRES12VXFALSEAttach RES Blue wire to Artic Cat's Black/White wire. Attach RES Green wire to ground. Route RES Black and Red power wires to the battery.
5
Artic Cat2008DVX50Normally OpenBlue/YellowSpliceRES12VXTRUECrimp the Blue wire from the RES12VX to the blue/yellow wire from the Arctic Cat's CDI unit. Connect the RES12VX's green wire to ground. (the RES12VX's yellow wire is not used)
6
Can-Am2011DS 90XNormally ClosedBlack/White or White/BlackCutRES12VXTRUEFrom either On/off switch, cut the White/Black or the Black/White wire and connect the RES12VX's Blue wire to one cut end the the RES12VX's Yellow wire to the other cut end.
7
Can-Am2011DS 90Normally ClosedBlack/White or White/BlackCutRES12VXTRUEFrom either On/off switch, cut the White/Black or the Black/White wire and connect the RES12VX's Blue wire to one cut end the the RES12VX's Yellow wire to the other cut end.
8
Can-Am2011DS 70Normally ClosedBlack/White or White/BlackCutRES12VXTRUEFrom either On/off switch, cut the White/Black or the Black/White wire and connect the RES12VX's Blue wire to one cut end the the RES12VX's Yellow wire to the other cut end.
9
EtonunknownImpuls 50 (AXL50)Normally ClosedRed/BlackCutRES12VXTRUECut the Red/Black wire and connect the RES12VX's Blue wire to one of the cut ends and then connect the RES12VX's Yellow wire to the other cut end.
10
EtonunknownThunder 90 (AXL90)Normally ClosedRed/BlackCutTRUECut the Red/Black wire and connect the RES12VX's Blue wire to one of the cut ends and then connect the RES12VX's Yellow wire to the other cut end.
11
EtonunknownViper 70 (R70)Normally ClosedBlack/WhiteCutRES12VXTRUECut the Black/White wire near the teather switch and connect the RES12VX's Blue wire to one of the cut ends and then connect the RES12VX's Yellow wire to the other cut end.
12
EtonunknownSierra 90 (DXL90)Normally ClosedWhite/BlackCutRES12VXTRUECut the White/Black wire and connect the RES12VX's Blue wire to one of the cut ends and then connect the RES12VX's Yellow wire to the other cut end.
13
HondaAllCRF50F & XR50Normally OpenBlack with White tracerSpliceRES6VXFALSEAttach RES BLUE wire to Honda's Black/White wire of the handlebar switch. Attach RES GREEN wire to frame.
14
HondaunknownEU2000i GeneratorNormally OpenBlack & GreenSpliceRES6VXFALSEFind the two wires that go to the factory Stop Switch. Splice the RES6VU-B's Blue wire to the black wire on the generator and then splice the RES6VU-B's Green wire to the green wire on the generator.
15
HondaunknownGX160 Go-Kart EngineNormally OpenBlack/RedSpliceRES6VXFALSESplice the RES's Blue wire to the Black/Red ignition wire. Connect the RES's Green wire to ground.
16
Honda2006TRX90Normally ClosedBlack/WhiteCutRES12VXTRUECut the Honda'a Black/White wire off the handlebar switch. Attach the RES BLUE wire to one cut end and attch the RES YELLOW wire to the other cut end.
17
KawasakiunknownKDX50Normally OpenSpliceRES6VXFALSE
18
Kawasaki2009KFX50Normally OpenBlue/YellowSpliceRES12VXTRUEMETHOD 1 (at handlebar switch)
19
Attach the RES BLUE wire to the Blue/Yellow wire coming from the handlebar switch. Then attach the RES GREEN wire to ground. YELLOW wire is not used. 
20
21
METHOD 2 (at tether switch)
22
Cut on of the GREEN wire that are at the pull-cord tether switch. Attach the RES BLUE wire to one cut end and attach the RES YELLOW wire to the other cut end. RES GREEN wire is not used.
23
KazumaunknownMeerkat 50Normally ClosedCutRES12VXTRUEBesides the left knee, under the gas tank, there is a factory kill switch with a tether that can be connected to the rider. Cut one of the wires that go to that switch and then connect the BLUE wire from the RES12VX to one of the cut ends and then connect the YELLOW wire from the RES12VX to the other cut end. This will allow the RES12VX to break the continuous loop in the Kazuma’s safety circuit and cause the engine to shut off. The tethered kill switch will still operate normally.
24
KazumaUnknownMini Falcon 90Normally ClosedCutRES12VXTRUEBesides the left knee, under the gas tank, there is a factory kill switch with a tether that can be connected to the rider. Cut one of the wires that go to that switch and then connect the BLUE wire from the RES12VX to one of the cut ends and then connect the YELLOW wire from the RES12VX to the other cut end. This will allow the RES12VX to break the continuous loop in the Kazuma’s safety circuit and cause the engine to shut off. The tethered kill switch will still operate normally.
25
KTM2006Adventure Mini, Adventure Senior, 50sxNormally OpenSpliceRES6VXFALSE
26
Polaris2013-2014Outlaw 90Normally ClosedBrown/WhiteCutRES12VXTRUEThe Factory Tether Switch has a Brown/White wire and a Black/Yellow wire attached to it. Cut either one of those wires then attach the remote shut-off's Blue wire to one cut end and the shut-off's Yellow wire to the other cut end. This will allow the remote shut-off and the factory tether switch to work at the same time.
27
Polaris2013-2014Outlaw 50Normally ClosedBrown/WhiteCutRES12VXTRUEThe Factory Tether Switch has a Brown/White wire and a Black/Yellow wire attached to it. Cut either one of those wires then attach the remote shut-off's Blue wire to one cut end and the shut-off's Yellow wire to the other cut end. This will allow the remote shut-off and the factory tether switch to work at the same time.
28
Polaris2012Outlaw 50Normally ClosedCutRES12VXTRUECut one of the wires going in to the factory teather switch. Attach the RES12VX's BLUE wire to one cut end and the RES12VX's YELLOW wire to the other cut end. Finish installing per the installation instructions.
29
Polaris2003Scrambler 50Normally ClosedCutRES12VXTRUECut one of the wires going in to the factory teather switch. Attach the RES12VX's BLUE wire to one cut end and the RES12VX's YELLOW wire to the other cut end. Finish installing per the installation instructions.
30
Polaris2004-2012Outlaw/Sportsman 90Normally ClosedCutRES12VXTRUECut the one of the wires going in to the factory teather switch. Attach the RES12VX's BLUE wire to one cut end and the RES12VX's YELLOW wire to the other cut end. Finish installing per the installation instructions.
31
Polaris2004-2006Predator 50Normally ClosedCutRES12VXTRUECut the one of the wires going in to the factory teather switch. Attach the RES12VX's BLUE wire to one cut end and the RES12VX's YELLOW wire to the other cut end. Finish installing per the installation instructions.
32
Suzuki1997LT-80Normally OpenBlack/YellowSpliceRES12VXTRUEConnect RES blue wire to Suzuki Black/Yellow wire (or Black/Red). Connect RES green wire to ground/frame.
33
Suzuki2003LT80Normally OpenBlack with Yellow tracerSpliceRES12VXTRUEConnect RES blue wire to Suzuki Black/Yellow wire (or Black/Red). Connect RES green wire to ground/frame.
34
Suzuki2001-2004JR50K3Normally OpenBlack with Yellow tracerSpliceRES6VXFALSEConnect RES blue wire to Suzuki Black/Yellow wire. Connect RES green wire to ground/frame.
35
Suzuki2005LT80Normally OpenBlack with red tracerSpliceRES12VXTRUEAttach RES BLUE wire to Suzuki Black/Red wire of the magento. Attach RES GREEN wire to frame (ground).
36
Suzuki2006-2009LT-Z50Normally ClosedOrange or Orange/GreenCutRES12VXTRUECut one of the wires going in to the factory remote stop switch. Attach the RES12VX's BLUE wire to one cut end and the RES12VX's YELLOW wire to the other cut end. Finish installing per the installation instructions.
37
Suzuki2003LT160Normally OpenBlack with Yellow tracer (B/Y)SpliceRES12VXTRUEConnect RES blue wire to Suzuki Black/Yellow wire. Connect RES green wire to ground/frame.
38
Suzuki2003LT50 QuadNormally ClosedBlack with Red tracerSpliceRES6VXFALSEConnect RES blue wire to Suzuki Black/Red wire. Connect RES green wire to ground/frame.
39
Yamaha2004Raptor YFM80Normally OpenBlack with White tracerSpliceRES12VXTRUEConnect the RES12VX's BLUE wire to the Raptor's B/W (black with white tracer) wire going to the handlebar switch. You may use the supplied wire tap for the connection. Then connect the RES12VX's GREEN wire to the vehicles frame/ground. In this configuration the RES12VX will ground the B/W wire when it is in the LOCK position and shut the engine-off.
40
Yamaha2004/2005Raptor 50 (YFM50)Normally OpenBlack with White tracerSpliceRES12VXTRUEAttach RES blue wire to Yamaha Black/White wire. Attach RES green wire to frame.
41
Yamaha2006PW50Normally OpenBlack with Red tracerSpliceRES6VXFALSEAttach the RES Blue wire to the Black/Red wire from the Off/Start/Run switch. Ground the RES Green wire to the vehicle's frame.
42
Yamaha2005-2007TT-R50ENormally ClosedBlackCutRES12VXTRUEThere are two black wires that connect the handlebar Off/Run switch to a gray connector under the fuel tank on the right side. Cut one of the two wire (doesn't matter which one) and attach the RES's Blue and Yellow wires to the two ends that were just cut. Wire the black and red RES leads to the battery.
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Loading...