HT - ASP Technical Request Form.xlsx

	A	B	C	E	F
1
2
3			TECHNICAL REQUEST FORM
4			TECHNICAL REQUEST FORM
5				HT TAP CHANGER
6
7
8
9	This form is intended for entering the specifications of HT tap changers with 1 or more identical stages, operated by 1 control device.
10
11	If you require a special HT tap changer, for example with 2 or more different stages, operated by 1 or 2 control devices (examples below), send us your specifications.
12
13
14	CUSTOMER'S NAME
15
16	COUNTRY
17
18
19	Question1	Select the required Max Voltage Um (kV) - test voltages
20	"Max Voltage Um (kV). Applied voltage 50Hz/1 min (kV) / Full wave lightning impulse BIL 1.2/50µs (kV)"
21
22
23	Question 2	Electric circuit diagram			.
24
25
26
27
28
29	Question 3	What is the number of positions?
30	(for the diagrams series-parallel and star-delta, the number of positions is implicitly 2)
31
32
33
34
35
36	Question 4	GROUP OF CONTACTS configuration
37
38		Question 4.1	Group of contacts COUNT per Stage ?		.
39
40
41
42
43		Question 4.2	Stage (Deck) COUNT ?		.
44
45
46
47
48
49	Question 5	RATED CURRENT per Fixed Contact
50	Select the fixed contact reference needed from the drop down list taking into account the following conbinations of characteristics
51
52
53
54	The tubular fixed contacts (up to 400A) are available only with electric circuits diagramms « Bridge », « Series/Parallel » or « Star-Delta »
55
56
57
58
59	Question 6	CONTROL DEVICE AND DECKS CONFIGURATIONS
60
61		Question 6.1	Decks Configurations		.
62
63
64
65
66		Question 6.2	Type of control device		.
67
68
69
70
71		Question 6.3	Type of vertical decks configurations		.
72
73
74
75
76
77
78
79	OPTIONAL FEATURES - the following questions are about optional features, by default the answer to these questions is NO if you need one of these characteristics choose from the drop-down list
80
81	Question 7	OPTIONAL ANODIC OXIDATION AND PRIMER PAINTING ON OUTSIDE ALUMINIUM PARTS
82
83	Are anodic oxidation and primer painting required for the outside aluminum parts?				NO (by default)
84
85	The previously selected control device. In yellow the areas that would be covered by the anodic oxidation and primer painting:
86
87
88
89	Question 8	OPTIONAL MECHANICAL LOCK WITH MICRO-SWITCH			NO (by default)
90
91
92
93
94
95	Question 9	SIGNALING MICRO-SWITCHES AND SAFETY MICRO-SWITCH
96
97		Question 9.1	Is signaling micro switches required ?		No (by default)
98
99
100		Question 9.2	Is safety micro switches required ?		No (by default)