Part List with Links for Maker Hangar Tricopter by Lucas Weakley (Part List by Coco K at veryhappyrobot.com)
 Share
The version of the browser you are using is no longer supported. Please upgrade to a supported browser.Dismiss

 
View only
 
 
ABCDEFGHIJKLMNOPQRSTUVWXYZ
1
BEWARE: I did not buy all of my parts online. I found many of my parts at local hobby stores. Many of the small parts online come in bulk and are difficult to find singular. Therefore, they are more expensive and the total money spent as represented here might be inaccurate. Also, I had many of these parts from earlier builds, such as the power supply and batteries. This list is written as you would have no parts, but do have access to the tools necessary for the build (laser-cutter, drill, glues, etc.)
2
QuantityPart + LinkPrice ($) (for one)Comments
3
1-7/32" Dia. (5.25 mm) Carbon Tube (Cut into bits of 1/2", 3/4", and 1")8.5
4
1Rod that fits in ID of Tube (Cut into 2 1/2" segment)8.5
5
37/16” x 7/16” x 12” Oak Arms4.99I bought a larger piece of oak and ripped it on the table saw down to 7/16". I was unable to find these online separate from Lucas' site.
6
8M3x25mm Stainless Steel Bolts5.93
7
4M3x6mm Stainless Steel Bolts4.77
8
16M3x10mm Stainless Steel Bolts5.76
9
8M3x22mm Stainless Steel Bolts5.76
10
25M3 Lock Nuts3.65
11
16M3 Washers1.73
12
46-32 x 1.25 Male/Female Standoffs4.79
13
46-32 Nylon Nuts15
14
46-32 x 3/8 Nylon Bolt1.12
15
20Black Cable Ties3.34
16
2M4 Washers6.22
17
22.5” x .047” Push Rods7.56
18
2Push Rod Easy Connectors9.46
19
2Velcro straps8.99
20
43” Wire Rope7.94
21
3Motors18.95(I used 990KV 2212 motors, like the ones I used in my quadcopter)
22
12Bullet Plugs for Motor Leads3.48Only buy these if you need them. The motors I got needed them, but other motor might come with these already soldered on.
23
3ESCs9.95
24
310 x 4.7 Props2.93
25
23300 mAh Batteries39.95
26
1Battery Connector5.93
27
10'16 Gauge Wire2.95
28
1Servo8.95
29
11 – 6″ Servo Extension1.75
30
14mm Heat Shrink4.88
31
110mm Heat Shrink3.61
32
10Male to Male Servo Wires For Flight Controller Board4.99
33
1Battery Charger32.95
34
1Power Supply16.95
35
1Lemon Rx DSM2 Compatible 6-Channel Receiver (Feather Light, End-Pin)5.75
36
1Flip MWC24.5https://youtu.be/sZbvihuzxW4?t=2m42s
37
Laser-Cut Parts (Plywood) (3mm thick)37Dropbox for all files. (you can get the files for lasercutting here. Also, I used 3mm, you can use any size near that. I couldn't find a specified number anywhere. Also, I would just pick this up at your local hobby store)
38
39
Total ($)339.48
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
1
80
1
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Loading...
 
 
 
Sheet1