BMW_E9x_Code_List_v1edit
 Share
The version of the browser you are using is no longer supported. Please upgrade to a supported browser.Dismiss

 
View only
 
 
Still loading...
ABCDEFG
1
SBR_FAHRER_1ModuleFunction value2007Description
2
2RADSTANDHEIZUNGXEnables the parked car ventilation option, just set to aktiv. Tested on non-idrive professional HU. Gives you 2 programmable timers to set when you would like the cabin fan to switch on.
3
Seat Belt Chime (Driver)ABGSBR_FAHRER_1 XDisables seat belt chime for driver side
4
Seat Belt Chime (Passenger)ABGSBR_BEIFAHRER_1XDisables seat belt chime for passenger side
5
Key Fob Ejected from Socket upon Engine StopCASKOMFORT_EJECTXWhen turning the engine off key fob will be ejected from socket. (Need to hold start/stop for extra 2 seconds) -- Does this prevent the door from chiming if you leave the key in the slot?
6
Unlock Doors CASER_KEYOUT_AUTOVRXUnlocks all doors when you remove key (2009: Only unlocks driver door if FOB set to unlock driver door only. Set FOB to unlock all doors, and this will unlock all doors, too) (also works with Comfort Access when engine is shut off, might need KOMFORT_EJECT activated) **Automatic door lock when you drive off must be enabled and must be the reason the doors locked for this feature to work, i.e. if you press the Central Lock button before the drive-off lock kicks in, the doors will not auto-unlock.
7
Close Windows/Roof with FobCASKOMFORTSCHLIESSUNG_FBXCloses windows + moon roof through Key Fob
8
Panic ModeCASSONDERTASTE_PANIKALARMXEnables panic alarm. Must have alarm installed. Hold trunk botton on FOB for 5 secs to activate. Change from "nicht_aktiv" to "panikalarm"
9
Disable Auto Dim MirrorsCASSPIEGEL_ELEKTROCHROMXSwitch to nicht_aktiv
10
Disable iDrive Legal DisclaimerCICLEGAL_DISCLAIMER_TIMESet to "kein_ld" to disable the disclaimer.
11
Restore "DSC Off" option in M Drive (M3s)CICDSC_OFF_CICNewer M3s removed the option to disable DSC completely via M Drive. This restores that option.
12
Alarm beep on lockDWAI QUIT_AKUST_SCHAERFXAlarm beep on lock (one beep) (must have alarm installed)
13
Alarm beep on unlockDWAI QUIT_AKUST_ENTSCHAlarm beep on unlock (two beeps) (must have alarm installed)
14
Disable windows safety featureFRM (NFRM)TUERAUF_STOP_MAUTXOpening doors will not interrupt window roll up operation. Normally, if you open a door while the window is automatically rolling up, it will stop the operation. This feature disables it.
15
Side Marker DeleteFRM (NFRM)SIDEMARKER_US (see Note)XDisables side marker/signal light when headlights are on. Change the value to "nicht_aktiv". Module value might be longer than SIDEMARKER_US. Here are some examples: SIDEMARKER_US_NFRM, SIDEMARKER_US_NF, or SIDEMARKER_US_MIT_FRA_V. On some cars disabling this one value is enough to turn off everything and making the changes below will also disable your angel eyes, so check after making this one change and only continue if you find your side markers are still on.
16
Fold mirrors w/ FOBFRM (NFRM)SPIEGEL_KOMFORT_EINKLAPP or ASP_KOMFORT_EINKLAPPXFold side mirrors with FOB (CA also works 2009/01 E92). Requires that CAS > KOMFORTSCHLIESSUNG_FB also be set to aktiv. Mirrors folded with the button inside the car cannot be unfolded via the FOB.
17
Bulb Testing WarningFRM (NFRM)KALTUEBERWACHUNG_BLK_HIXCold testing bulbs in turn signal rear - change setting to nicht_aktiv
18
Bulb Testing WarningFRM (NFRM)KALTUEBERWACHUNG_BLK_VOXCold testing bulbs in turn signal - change setting to nicht_aktiv
19
Bulb Testing WarningFRM (NFRM)KALTUEBERWACHUNG_KZLXCold testing bulbs in number plate - change setting to Nnicht_aktiv
20
Bulb Testing WarningFRM (NFRM)KALTUEBERWACHUNG_NSWXCold testing bulbs in foglights - change setting to nicht_aktiv
21
Bulb Testing WarningFRM (NFRM)KALTUEBERWACHUNG_RLXCold testing bulbs in reversing light - change setting to nicht_aktiv
22
Bulb Testing WarningFRM (NFRM)WARMUEBERWACHUNG_KZL_LIXWarm testing bulbs in number plate light bulb - change setting to nicht_aktiv (For my 2006, it was just WARMUEBERWACHUNG_KZL)
23
Disable DRLsFRM (NFRM)DRL_V_GEDIMMTXDisables the Daytime Running Lights (DRL) on Canadian models. This is sub-module FRM, my car did not have an NFRM sub-module.
24
Right Parking lamp malfunction error messageFRM (NFRM)FEHLERMELDUNG_CC_SL_V_RXremove the warning from your BMW idrive when you install HID's or angel eyes
25
Auto Dimming MirrorsFRM (NFRM)SPIEGEL_ELEKTROCHROMXnicht_aktiv to turn off autodim mirror or aktiv to enable mirror
26
Bulb Testing WarningFRM (NFRM)KALTUEBERWACHUNG_BLK_HIXCold testing bulbs in turn signal rear - change setting to nicht_aktiv
27
Bulb Testing WarningFRM (NFRM)KALTUEBERWACHUNG_BLK_VOXCold testing bulbs in turn signal - change setting to nicht_aktiv
28
Bulb Testing WarningFRM (NFRM)KALTUEBERWACHUNG_KZLXCold testing bulbs in number plate - change setting to Nnicht_aktiv
29
Bulb Testing WarningFRM (NFRM)KALTUEBERWACHUNG_NSWXCold testing bulbs in foglights - change setting to nicht_aktiv
30
Bulb Testing WarningFRM (NFRM)KALTUEBERWACHUNG_RLXCold testing bulbs in reversing light - change setting to nicht_aktiv
31
Bulb Testing WarningFRM (NFRM)WARMUEBERWACHUNG_BLK_HIXWarm testing bulbs in rear turn signals - change setting to nicht_aktiv
32
Bulb Testing WarningFRM (NFRM)WARMUEBERWACHUNG_KZL_LIXWarm testing bulbs in number plate light bulb - change setting to nicht_aktiv (For my 2006, it was just WARMUEBERWACHUNG_KZL)
33
Corner Activate on French E87FRM (NFRM)PWM_FRA_V_FKT_SIDEMARKER and SIDEMARKER_US_MIT_FRA_VXYou must set PWM_FRA_V_FKT_SIDEMARKER to wert_02 and SIDEMARKER_US_MIT_FRA_V to aktiv.
34
Euro Adaptive Head Lamps (aka AHL2 or Variable Light Distribution)NFRMAHL2_ENABLERequires active head lamps, may also require FRM3 module. Set this to "aktiv" to enable Variable Light Distribution. When enabled and the head lamp switch is in the Auto position, at lower speeds the head lamps will project a wider, shallower beam, and at high speeds they will project a longer, narrower beam. To test functionality, point the head lamps toward a wall and start the engine; Ignition On is not sufficient. Then first switch the head lamps to the "normal" low beam setting (not Auto). When the low beams complete their self-leveling routine, switch to the Auto setting. The driver's side lamp should move noticeably down and outward.
35
Pathway Lighting via Trunk fob buttonNFRMHEIMLEUCHTEN_FUNKSCHLWhen set to aktiv, pathway lighting (head lamps, tail lights, side markers) is temporarily switched on while the car is off by pressing the Trunk button on the fob.
36
Seat Belt Butler (E92s)NFRMENABLE_GURTBRINGER_FA or
ENABLE_GURTBRINGER_BF
Set to nicht_aktiv to disable for the driver (FA) and/or passenger (BF)
37
Set DRLs to angel eyes or High BeamsNFRMVERHALTEN_DRL_TFLSet to "drl_s" for angel eyes and "drl_h" for high beams.
38
Auto Start/Stop remembers last stateIHKMSA_MEMORYOn M3s equipped with Auto Start/Stop, setting this to "aktiv" will cause Auto Start/Stop to start up in its previous state when the engine is started, rather than always defaulting to on or off (depending on region).
39
Climate don't turn ON in Auto modeIHKKLIMA_MIT_AUTO_0XSet to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
40
Climate don't turn ON in Auto modeIHKKLIMA_MIT_AUTO_1XSet to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
41
Climate don't turn ON in Auto modeIHKKLIMA_MIT_AUTO_10/15XSet to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
42
Climate don't turn ON in Auto modeIHKKLIMA_MIT_AUTO_2XSet to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
43
Climate don't turn ON in Auto modeIHKKLIMA_MIT_AUTO_0XSet to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
44
Climate don't turn ON in Auto modeIHKKLIMA_MIT_AUTO_1XSet to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
45
Climate don't turn ON in Auto modeIHKKLIMA_MIT_AUTO_10/15XSet to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
46
Climate don't turn ON in Auto modeIHKKLIMA_MIT_AUTO_2XSet to nicht_aktiv. A/C will not automatically turn on when Auto is pressed.
47
REST feature on cars with ALL buttonIHKREST_TASTE_VERBAUT"Enabling this will switch your ALL button back to a REST button; see http://www.e90post.com/forums/showthread.php?t=497347 for more information.
48
Wiper wipes to End position after turning engine offJBBF (2JBBF)ZYCLUS_VOLLEND_KLR_AUSXWhen Wiper is Wiping, and you turn engine off, it will now keep on going until it returns to the home (bottom) position.
49
Auto Headlight Sensitivity adjustment from BC ButtonKOMBILICHT_AUT_WERT_1, LICHT_AUT_WERT_2, LICHT_AUT_WERT_3XSet all 3 to aktiv, change the sensitivity of your automatic light sensor in your Dash! Only works if you do NOT have iDrive. If you have CCC iDrive, see the option higher up in the spreadsheet. If you have CIC iDrive, there is not yet a known way to do this.
50
Digital SpeedKOMBIBC_DIGITAL_VXDisplays digital speed in cluster
51
Door DongKOMBICC_ZUENDSCHLUESSELXDisables dong when driver's door is open and key is in slot.
52
Instant MPGKOMBIDIGITAL_KVAXDisplays digital instant-read MPG in cluster
53
Instrument Cluster Lighting Always OnKOMBIM_TAG_SKALENBELEUCHTUNGSet to "aktiv" to keep your instrument cluster lighting on even when your head lamps are off.
54
Display cruise control set speedKOMBITEMPOMAT_SETZ_ANZ_DAUERXChange the value from wert_01 to wert_02 On vehicles that do not briefly indicate the speed the cruise control is set at, changing this value will enable the display.
55
Driver seat memory options in clusterKOMBISITZ_AUT_VERST_AUS, SITZ_AUT_VERST_ENT and SITZ_AUT_VERST_ENT_TXEnable driver seat memory options in cluster when retrofiting powered seats (3 parameters must be aktiv) + VO $459 added to CAS and FRM
56
Display cruise control set speedKOMBITEMPOMAT_SETZ_ANZ_DAUERXChange the value from wert_1 to wert_2 On vehicles that do not briefly indicate the speed the cruise control is set at, changing this value will enable the display.
57
Fuel tank reserve warning levelKOMBIC08_TANK_SCHWELLE_RESERVESet to wert_01 to have the fuel reserve warning show up at 1/8 full rather than 1/4 (tested on an 2011 M3)
58
Euro MDM (for M3s)M3DSCMDYNAMIC_MODE_USA; US_VEHICLE; M3_UEBERSTEUERN_MUE_0; M3_UEBERSTEUERN_MUE_1_2_MEuro MDM allows more wheelspin and sliding than the US calibration. To enable it, the first two settings should be set to "nicht_aktiv". The next two are based on your chassis and whether you want Euro or US mode: wert_00 for Euro E90; wert_01 for US E90; wert_02 for Euro E92; wert_03 for US E92; wert_04 for Euro E93; wert_05 for US E93
59
Disable "DSC Off" buttonM3DSCABSCHALTBARKEIT_DSCTested on a 2011 E92 M3. Default is "aktiv", but when set to "nicht_aktiv", the DSC Off button is deactivated, i.e. it is not possible to turn DSC completely off. MDM can still be used, however.
60
Enable SMS management from Professional RadioRAD2SMS_RAD2XEnable SMS management from RAD2. Change nicht_akitv to aktiv. Note: RAD2 prod date 2010, MULF2 High Basis SVS prod. date 2009, installed on e91 2006.
61
Rain Close from full openSHD (FZD)REGENSCHLIESSENXAuto wipers have be on for this to work. Once it closes, you wont be able to re-open sunroof until car power down for about 10 minutes. spaz (CasperSYTFU Verified 07 E92)
62
Rain Close Sunroof from TiltSHD (FZD)REGENSCHLIESSENTILTX(CasperSYTFU Verified 07 E92)
63
Xenon retrofitVO in FA string (see notes)522XThis is for those installing OEM xenons without the self leveling feature. Add $522 to VO (telling the car your adding xenon headlights). Disable self leveling for xenon headlights by saying nicht_aktiv to line AUTO_LWR_ENABLE (in FRM). To enable inner halogen light as high beam (in FRM):

PWM_ANST_FL_BIXENON
wert_01
wert_01

More details: http://www.e90post.com/forums/showpost.php?p=8982434&postcount=1666
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Loading...
 
 
 
E9x Code List
Translations Quick Reference
E7x Code List
SA Codes List
Form Responses 1
Announcements
Sheet7
Form Responses