FLOOR FINISHES AND INTERIOR FINISHES_2.xlsx

	A	B	C	D	E	F
1	Bill Ref.	Description	Quantity	Unit	Rate	Total

2		GFA
3		FECA	2,750.00	m2		0.00
4		UCA	216.00	m2		0.00
5		External Areas	696.00	m2		0.00
6		WATERPROOFING
7		GENERALLY
8	10/1A	Tenderers are referred to the Specification for the full particulars of workmanship and materials, and the quantities herein provided shall be read in conjunction with the drawings		Note		0.00
9	10/1B	This Builders Bill of Quantities has not been measured in accordance with the Australian Standard Method of Measurement of Building Works, 5th Edition		Note		0.00
10		REFERENCE
11		Refer to following sections of "Project" for "Architectural Specification" Revision P1 dated 06 June 2025 by Edmiston Jones: 0621 - Waterproofing - wet areas.		Note		0.00
12		Refer to following architectural drawing series: A200 for "Floor Plans"		Note		0.00
13		Refer to "Project" for "Materials & Finishes Schedule" Revision E dated 13 June 2025 by I&D Studio		Note		0.00
14		PRICES
15		Prices shall include for:
16	10/1C	Fair edges, dressing over angle fillets, turning into grooves and all other labours		Note		0.00
17	10/1D	Internal and external angles, fillets, circular edges		Note		0.00
18	10/1E	Separation strips other than those specifically detailed		Note		0.00
19	10/1F	Nails, screws, clips, rivets, straps, fixings and the like		Note		0.00
20	10/1G	Provision for thermal movement		Note		0.00
21	10/1H	Isolation of dissimilar materials		Note		0.00
22	10/1J	Temporary screeds, rules and grounds		Note		0.00
23	10/1K	Laps, square cutting and waste		Note		0.00
24	10/1L	Environmental and sustainable requirements detailed in the specification		Note		0.00
25		GENERAL ITEMS
26	10/1M	Allow for giving notice of and providing facilities for inspection, of tanking components		Item		0.00
27	10/2A	Allow for protecting the waterproofing from damage throughout the work and cleaning off on completion, including cleaning out of rainwater systems		Item		0.00
28	10/2B	Allow for ensuring that the roof slab structure is satisfactory before fixing membranes, and providing certification of same prior to commencing installation		Item		0.00
29	10/2C	Allow for testing		Item		0.00
30	10/2D	Allow for data submissions		Item		0.00
31	10/2E	Allow for warranties		Item		0.00
32	10/2F	Allow for maintenance manual		Item		0.00
33	10/2G	Allow for workshop drawings and details		Item		0.00
34		WATERPROOFING
35		Waterproofing to Wet Areas
36		Horizontal membrane; applied on wet area floor to falls and/or cross falls
37		Ground Level (A200_P7)	276.00	m2		0.00
38		Vertical membrane; applied on shower wall
39		Ground Level (A200_P7)	1,203.00	m2		0.00
40		Turn-ups less than or equal to 250mm high; including any angle fillet and dressing over fillets at bottom
41		Ground Level (A200_P7)	495.00	m		0.00
42		PLASTERING & RENDERING
43		GENERALLY
44	23/1A	Tenderers are referred to the Specification for the full particulars of workmanship and materials and the quantities herein provided shall be read in conjunction with the drawings		Note		0.00
45	23/1B	This Builders Bill of Quantities has not been measured in accordance with the Australian Standard Method of Measurement of Building Works, 5th Edition		Note		0.00
46		REFERENCES
47		Refer to following sections of IRT Marco Polo "Architectural Specification" Revision P1 dated 06 June 2025 by Edmiston Jones: 0331 - Brick construction, 0671 - Painting		Note		0.00
48		Refer to following architectural drawing series: A200 for "Floor Plans", A600 for "Elevations & Sections", A805 for "Wall Types Details"		Note		0.00
49		Refer to IRT Marco Polo "Materials & Finishes Schedule" Revision E dated 13 June 2025 by I&D Studio		Note		0.00
50		PRICES
51		Prices shall include for:
52	26/1C	Cutting including raking and circular cutting and waste		Note		0.00
53	26/1D	Making good around pipes and the like		Note		0.00
54	26/1E	Environmental and sustainable requirements detailed in the Tender documents (if any)		Note		0.00
55		GENERAL ITEMS
56	23/1G	Allow for giving notice of and providing facilities for inspection	1.00	Item		0.00
57	23/1H	Allow for co-operating with, attending on and making good after all other trades as necessary	1.00	Item		0.00
58	23/1J	Allow for covering and protecting surfaces from weather and building operations	1.00	Item		0.00
59	23/1K	Allow for cleaning on completion	1.00	Item		0.00
60	23/1L	Allow for compliance with quality assurance requirements	1.00	Item		0.00
61	23/1M	Allow for data submissions	1.00	Item		0.00
62	23/1N	Allow for warranties	1.00	Item		0.00
63	23/1P	Allow for contractor's submissions	1.00	Item		0.00
64		RENDER TO EXTERNAL WALLS
65		Rendered to brickworks
66		Ground Level (A200-P7)	911.00	m2		0.00
67		Roof Level (A203-P6)	13.00	m2		0.00
68		RENDER TO INTERNAL WALLS
69		10mm render to existing brick walls of W03, W03a, W03b and new brick walls of W03c (NB: Refer detail to A805-P5)
70		Ground Floor (A201-P6 to A202-P6)	170.00	m2		0.00
71		TILING
72		GENERALLY
73	19/1A	Tenderers are referred to the Specification for the full particulars of workmanship and materials, and the quantities herein provided shall be read in conjunction with the drawings		Note		0.00
74	19/1B	This Builders Bill of Quantities has not been measured in accordance with the Australian Standard Method of Measurement of Building Works, 5th Edition		Note		0.00
75		REFERENCE
76		Refer to following architectural drawing series: A200 for "Floor Plans"		Note		0.00
77		Refer to IRT Marco Polo "Floor Finishes - Ground Floor Plan 01" ID110 Revision 3 dated 15 June 2025 by I&D Studio		Note		0.00
78		Refer to IRT Marco Polo "Floor Finishes - Ground Floor Plan 02" ID111 Revision 3 dated 15 June 2025 by I&D Studio		Note		0.00
79		Refer to IRT Marco Polo "Materials & Finishes Schedule" Revision E dated 13 June 2025 by I&D Studio		Note		0.00
80		PRICES
81		Prices shall include for:
82	19/1C	Temporary rules, temporary grounds, temporary screeds and the like		Note		0.00
83	19/1D	Cutting and making good around pipes, sanitary fittings, floor wastes and the like		Note		0.00
84	19/1E	All normal bedding and pointing materials, adhesives and the like		Note		0.00
85	19/1F	Standard glazed edge tiles		Note		0.00
86	19/1G	Salient and re-entrant corners including trims if required by the documents		Note		0.00
87	19/1H	Environmental and sustainable requirements detailed in the Tender documents (if any)		Note		0.00
88		GENERAL ITEMS
89	19/1J	Allow for attending on and making good after all other trades, cutting out and making good defective work		Item		0.00
90	19/1K	Allow for covering and protecting surfaces from weather and building operations		Item		0.00
91	19/1L	Allow for contractor's submissions		Item		0.00
92	19/1M	Allow for laying sample panel		Item		0.00
93	19/2A	Allow for submitting samples		Item		0.00
94	19/2B	Allow for cleaning and polishing on completion		Item		0.00
95	19/2C	Allow for grouted and caulked joints		Item		0.00
96	19/2D	Allow for spare tiles		Item		0.00
97	19/2E	Allow for preparation of substrate		Item		0.00
98	19/2F	Allow for warranties		Item		0.00
99		NOTES AND ASSUMPTIONS
100		Note: Unknown FE Demarcation for Scullery, Kitchen, Temp Room 1-3, Ironing, TBC, Chef Ma., Pantry, PG Holding Bay, Laundry Area, Area Beyond Door Link To Cordeaux Louge, and ELEC DB. Assumption: Floor Tiles Finishes on the above Areas.		Note		0.00