Program Description:

"ClipConnTable" is a spreadsheet program written in MS-Excel for the purpose of analysis of steel beam end

connections using double clip angles either welded or bolted to the beam web, and bolted to either the column

flange, column web, or girder web. The connections may be subjected to end shear reaction and/or axial load.

Specifically, all applicable "limit states" for the end connection analysis pertaining to the clip angles, bolts, beam

web, column flange or web, and girder web are checked. The program is presented in a "tabular" format.

This program is a workbook consisting of four (4) worksheets, described as follows:

Program Assumptions and Limitations:

1. The most critical assumption used in this program is that all beam end connections are basically

"full-depth", utilzing as many vertical rows of bolts as permitted. See first page of each worksheet for

outline of other assumptions used.

2. This program is basically a "tabular" format version of the "CLIPCONN.xls" program, and is best suited to

analyze a large number of beam end connections in a very quick, efficient, and concise manner.

(Note: The individual case worksheets in the "CLIPCONN.xls" program were used as "masters calculations"

in the development of this program, and may be referred to for individual detailed calculations.)

3. Once the user has inserted the required input data in cells starting at A408 through F408 and down for each

of the connections to be analyzed, then the user should copy the row of cells from G62 through the end cell

of the particular spreadsheet (either CI408, CV408, or EG408) and "Paste Special" the formulas on down

the worksheet to match the total number of connections to be analyzed.

4. This program follows the procedures and guidelines of the AISC 9th Edition Allowable Stress (ASD) Manual

(1989) and the AISC 9th Edition Manual Vol. II - Connections (1992).

5. This program uses the database of member dimensions and section properties from the "AISC Shapes

Database", Version 3.0 (2001) as well as the AISC 9th Edition (ASD) Manual (1989).

6. This program assumes that the tension capacity for any "limit state" is reduced by the presence of shear.

For allowable bolt tension in the presence of shear, the "interaction" (combined stresses) is handled directly

by the AISC Code equations. For other "limit states" in combined stresses such as bolt bearing, gross and

net shear and tension, and block shear and tension tearout, the effect of "interaction" is handled by use of

the formula, P/Ra+(R/Rv)^2=1, as suggested from the following reference:

"Combined Shear and Tension Stress" - by Subhash C. Goel, AISC Journal, 3rd Qtr.-1986.

Thus, the reduction factor applied to the tension "limit state" capacity is = (1-R/Rv)^2.

R = actual shear end reaction

Rv = allowable shear capacity for the particular "limit state" considered

7. This program contains numerous “comment boxes” which contain a wide variety of information including

explanations of input or output items, equations used, data tables, etc. (Note: presence of a “comment box”

is denoted by a “red triangle” in the upper right-hand corner of a cell. Merely move the mouse pointer to the

desired cell to view the contents of that particular "comment box".)