ABCDEFG
1
V1.2
2
Calculator For Hyperfine Bed Leveling
3
https://shop.prusa3d.com/forum/prusa-i3-kit-building-calibrating-first-print-main-f6/hyperfine-bed-leveling--t4330.html
4
5
Disclaimer: Using the custom firmware is at your OWN risk, noone else, you take full responsibility for any damages / issues etc.
6
7
To use this document, go to File -> Make Copy
8
9
10
(input below)
11
Layer Height Input your desired layer height here. (I.e. 0.20)
12
13
Why aren't you including the link to the firmware?
14
So you'll read the thread and understand what's its about.
15
16
Live-Z Input
17
Dont use negative signs for live-z. example; Live-Z is at -250, just input 250.
18
19
20
Colors:
21
Best
22
2nd Best
23
3rd Best
24
25
Make sure you've calibrated your extrusion multiplier before continuing
26
27
Proceed to the next sheet.
28
29
Known issues
30
If you have several Z Values that have the correct height, it just selects the first one it sees. and they share best and 2nd best.
31
32
Changes:
33
v1.2
Changed "Fine Tune" to work with the "curr corr" instead of "live-z", since its more about fine tuning
34
than finding the range. (Remember to insert "Curr Corr") and then input your current offsets in first col.
35
36
v1.1Added "Fine Tune" sheet.
37
Input your current offset (from calib) into the cell above 'Height', and Z-live to center.
38
39
MrSpectacle
40