ABCDEFGHIJKLMNOPQRSTUVWXYZAAABACADAEAFAGAHAIAJAKALAMANAOAPAQARASAT
1
2
3
INSTRUCTIONS
Cut-n-Paste data from the MEPStoPHPP tool into the PHPP Components Sheet as shown below.
4
Step 1 - go to PHPP data and choose your heat pump from cell B16
5
Step 2 - Copy and Paste in your PHPP - graphic guide is to the right.
6
Step 3 - Print PHPP Data tab to pdf file and submit with your certification
7
8
A selection assistant has also been included below if you want to see units with a specific capacity. Hint leave Ducted/non-ducted/both BLANK (use delete key) and Unit Configuration BLANK to see more.
9
10
Number of air conditioning units with sufficient data for PHPP in database:
11
0
12
13
14
Database filter
15
Note that "both" in terms of ducting refers to having both ducted and non ducted components. Leave blank if you don't want to use this filter
16
17
Note kW heating is rated heating conditions at 7C outdoor, 20C indoor. Cooling is at 35 outdoor 27 indoor. Consult the supplier for capacity at your design conditions
18
19
Min Heating kWMax Heating kWMin Cooling kWMax Cooling kWBrandDucted / non-ducted / bothUnit ConfigurationOptions
20
3535MITSUBISHI ELECTRIC#NAME?
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
1. Assuming it's a normal air-to-air heating heat pump (it can also be used for cooling just not hot water). Set to 2-Only heating
45
2. Air-to-air heat pump heat source is outdoor air.
46
3. Air-to-air heat pump puts the heat into the indoor air (the heat sink).
47
4. Set to recirculation cooling
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100