BOQ for Roof Water proofing.xlsx

	B	C	D	E	F	G	H
1
2	BOQ for Super Structure Water Proofing / Roof Water proofing
3	BILL OF QUANTITY FOR SUBSTRUCTURE WATER PROOFING WORK / ROOF WATER PROOFING WORK
4	Si.No	Description	Unit	Quantity	Unit Rate	Amount	Remark
5		Bill of Quantity for Roof Water Proofing Work- Torch applied

6		Roof Area Water Proofing Work-Horizontal
7	1	Surface Preparation on horizontal area before application of water proofing work	m2
8	2	Concrete Screed laid to slope :- Supply and cast Light Weight Screed 50-100 mm thick as per project Specification	m2
9	3	Supply and apply one (or) two coat approved bituminous primer over the light weight screed , as per project specification	m2
10	4	Supply and apply one (or) Two Layer Approved Torch applied bituminous water proofing membrane over the primer surface, as per project specification	m2
11	5	Supply and apply one layer Polystyrene Heat Insulation over the membrane surface, as per project specification	m2
12	6	Supply and apply one layer Geotextile (or) Terram Sheet as a separation layer over the membrane surface, as per project specification	m2
13	7	Supply and cast 50 to 100 mm thick average screed 3 x 3 bay slope lines with flexal board , and filling the joints with sealant	m2
14	8	Dressing of Rain Water outlets	Nos
15		Roof Area Water Proofing Work-Upstands Vertical
16	1	Groove cutting :- To Prepare groove cutting on upstands vertical surface	lm
17	2	Upstands :- Supply and Apply one coat primer + One (or) Two Layer mineral finished bituminous water proofing membrane to be terminated in the groove as per project specification	lm
18	3	Supply and fix approved aluminum flashing including sealant	lm
19
20		Total Work Done Amount for Water Proofing Work
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100