CIB Slide Block Sizing Chart - Live
 Share
The version of the browser you are using is no longer supported. Please upgrade to a supported browser.Dismiss

View only
 
ABCDEFGHIJKLMNOP
1
PLATE TYPEDEGREE CIB Sliders (Uni/Pro)Grind Trucks
2
CompatibleInstallation Notes:AdaptorSMLXLCompatible*Notes:SMLCompatible*Notes:
3
POWERDYNE
4
AriusNoThe Arius does not have traditional mounting system and is not compatible.N/AxxxxYes23, 45, 6, 7, 8, 9No
5
Reactor Fuse10YesSilver3, 45, 67, 8, 9
10, 11, 12, 13
Yes3, 45, 67, 8, 9Yes (but)*
6
Reactor Neo10YesSilver3, 45, 67, 8, 9
10, 11, 12, 13
Yes3, 45, 67, 8, 9Yes (but)*
7
Reactor Pro Series10YesSilver3, 45, 67, 8, 910, 11, 12Yes3, 45, 67, 8, 9Yes (but)*
8
Thrust15Yes (but)*Remove top washer from the Slide Block to ensure the bolt heads don't touch the plateBlack3, 456, 7, 89, 10NoxxxYes
9
DynaPro (discontinued)
12YesBlack45Yes3, 45, 67, 8, 9Yes
10
Revenge (discontinued)
15Yes (but)*The kingpin has a rounded end which doesn't allow the Silver Adaptor to seat properly to the base. Also the Black Adaptor does not fit over the kingpin.Silver3, 4, 56, 78, 9, 1013Yes3, 45, 67, 8, 9Yes
11
Rival (discontinued)15Yes (but)*The kingpin has a rounded end which doesn't allow the Silver Adaptor to seat properly to the base. Also the Black Adaptor does not fit over the kingpin.Silver3, 4, 56, 78, 9, 10Yes34, 5, 67, 8, 9Yes
12
Triton (discontinued)15YesSilver45, 68NoxxxYes
13
SURE-GRIP
14
Avanti Aluminum10YesSlide Blocks do not fit size 1, does not fit a size 2, but possibly could if you slotted out the circle, also sizes 4 & 6 seem very off center - DeeBlack34, 56,78Yes1, 2, 34, 56, 7, 8 Yes (but)*
15
Avanti Magnesium10Yes( The black bar does fit over the kingpin of the Avanti plates. Both Avanti Aluminum & Magnesium are the same. We found the same problems as Dee did with the Aluminum plates - BryanBlack34, 56,78Yes1, 2, 34, 56, 7, 8 Yes
16
Avenger45NoThe angle is too strong. We would need to design an additional Adapter to fit the 45 angle.xxxxYes1, 2, 34, 56, 7, 8 No
17
ClassicNoxxxYes (but)*
18
CompetitorNoxxxYes
19
Laser
20
NovaYesNo
21
Power-TracYes
22
Probe10YesYes
23
Rock10YesBlack4,5,67YesYes
24
Super XNoNoxxxYes
25
XK - 410NoYesYes
26
BONT
27
Athena20Yes (but)*Small degree of bending required. Can be done by hand or upon installation.Black5.5, 5.75
6.25, 6.5, 6.75
7.0, 7.25, 7.75, 8.0Yes
28
Ignite (Nylon)20Yes (but)*Small degree of bending required. Can be done by hand or upon installation.Black135145, 155165Yes125, 135
145, 155, 165
Yes (but)*
29
Infinity40NoThe angle of the bar isn’t compatible with the infinity
30
Tracer16Yes (but)*Small degree of bending required. Can be done by hand or upon installation.Black
31
ROLL LINE
32
BlasterNoKing pin too wide to fit either barYesYes (but)*
33
EnergyYesYes (but)*
34
EVO
35
GiottoYesYes (but)*
36
Killer/Killer TitaniumNoKing pin too wide to fit either barYes140150, 160Yes (but)*
37
Mariner CupYesYes (but)*
38
MatrixYesYes (but)*
39
MistralYesYes (but)*
40
MirageYesYes (but)*
41
The Variant MYes140150160Yes (but)*
42
MOTA
43
Boss16Yes (but)*small degree of bending required. Can be done by hand or upon installation. Shorter cushions are neededBlack5.0 to 5.56.0 to 6.256.5 to 7.07.25 to 7.5No
44
Boss ProYes (but)*Black5.0 to 5.56.0 to 6.256.5 to 7.07.25 to 7.5
45
CHAYA
46
Shiva ClipNoxxx
47
Ophira
48
Zena
49
Shari20Yessmall won't fit any size smaller than 3, right up against kingpins3,4,5, 67,8
50
RCS
51
Sunlite10Noslider block mounting bolts hit the plate.NoxxxYes (but)*
52
CRAZY
53
Apollo size 20520Noplate too small for the slidersN/A
54
Apollo (Nylon)20Yes (but)*Small degree of bending required. Can be done by hand or upon installation.Black4??Yes (but)*
55
Venus20Yes (but)*Small degree of bending required. Can be done by hand or upon installation.Black252Yes (but)*
56
ATOM (LUIGINO)
57
EagleYes5.255.75, 6.256.75, 7.25, 7.75
PRO ONLY >
8.25, 8.75
Yes (but)*
58
Falcon16Yes (but)*Small degree of bending required. Can be done by hand or upon installation. Shorter cushions are needed. 7.75 plate to large for the XL slider barBlack5.0 to 5.56.0 to 6.256.757.25 to 7.5Yes5.255.75, 6.256.75, 7.25, 7.75
PRO ONLY >
8.25, 8.75
Yes (but)*
59
Pilot Viper16Yes (but)*Remove top washer from the Slide Block to ensure the nuts don't touch the plateBlack5Yes5.255.75, 6.256.75, 7.25, 7.75
PRO ONLY >
8.25, 8.75
Yes
60
SNYDER
61
AdvantageNoYes
62
Super DuluxeNoYes
63
ROLLER DERBY ELITE
64
Neutron 600YesYes (but)*
65
Pro Octane 7000YesYes (but)*
66
LABEDA
67
ProlineYesSilver625, Yes
68
69
MOXI BEACH BUNNY PLATES
10Yesplate size 400 & 450 are too small for the blocks- They is a small spacer under the cushions that can be removed when installing the slider bar. The plate works well with the slider blocksBlack
plate sz 500 , 550
600650,700750Yes
70
71
72
73
Loading...