_TITAN vs modules compatibility

	B	C	D	E
1
2
3	Brand	Module	Compatible with TITAN?	Comments

4	AML	ez1084-500	Yes, with issues	This unit does fit, though there is a small 1mm gap between the units and the front of the chassis. However everything works as expected.
5	Ams Neve	RMX16	Yes
6	Ams Neve	1073LB	Yes
7	Ams Neve	2264ALB	Yes
8	AMS Neve	88RLB	Yes
9	API	527A	No
10	API	550b	No
11	API	512	Yes	Both C & V will fit just fine
12	API	550A	Yes, with issues	Not tested in our lab. Most likely it will fit not entirely leaving around 1-2 mm gap between module and chassis. It should work properly though.
13	API	529	Yes
14	API	525	Yes, with issues	Not tested in our lab. Most likely it will fit not entirely leaving around 1-2 mm gap between module and chassis. It should work properly though.
15	API	560	No
16	Avedis	E27	No
17	Avedis	MA5	No
18	BAE	1073MPL	Yes, but not tested officially	It was reported by a customer that this unit will fit just fine. Please note that it was not tested in our lab, but based on the feedback it should work just fine.
19	BAE	73EQL	Yes
20	BAE	1073D	Yes, with issues	Not tested in our lab. Screw above the connector (which holds the chassis) would have to be removed, and it will probably fit with maximum 0.5 mm gap (Theoretically - as there could be no gap at all)
21	BAE	G10	Yes
22	Bereich03	VU meters	Unknown
23	Bereich03	Density	Yes
24	Burl Audio	B1	Yes
25	CAPI Audio	BT50	Yes
26	CAPI Audio	FD312	Yes
27	Chameleon Labs	560 EQ	Yes
28	Chandler Limited	GERM 500 MKII	No
29	Chandler Limited	TG-2 500	Yes, with issues	Not tested in our lab, but modules should fit in, but would probably leave small (~2mm) gap as it won't go all the way till the end. However we have received some information (not confirmed by us) that removing the side and back metal cover (just few screws will help to fit the unit properly).
30	Chandler Limited	TG Opto	No
31	Cranborne Audio	Cranborne Camden 500	Yes
32	DOCtron	IMC-500	Yes
33	Elysia	Karacter	Yes
34	Elysia	Skulpter	Yes
35	Elysia	xfilter	Yes
36	Elysia	nvelope	Yes
37	Elysia	mpressor	Yes
38	Elysia	xpressor	Yes
39	Great River	MP-500NV	Yes
40	Great River	32EQ	Yes
41	Heritage Audio	73 EQ Jr	Yes
42	HRK	CS566	Yes
43	IGS	Rubber Bands 500 Mastering EQ	No
44	IGS	One LA 500	No
45	IGS	Tubecore 500	No
46	Joemeek	MEC500	Yes
47	Kush	clariphonic 500	Yes
48	LaChapell Audio	503	Unknown
49	LaChapell Audio	583S MK2	Yes
50	LaChapell Audio	500TDI	Yes
51	LaChapell Audio	583E TUBE	Yes
52	Lindell Audio	7x500vin	No
53	Lindell Audio	PEX500vin	No
54	Lindell Audio	PEQ-501A	No
55	Little Labs	VOG	Yes
56	Louder than Liftoff	Chop Shop EQ	Yes
57	Mäag Audio	EQ4 500	No
58	Mäag Audio	EQ2 500	No
59	Mäag Audio	PREQ4 500	No
60	Millenia	HV-35	Yes, with issues	Not tested in our lab, however it seems that module will fit, but most likely it won't go all the way till the end - so there is a possibility that between module and chassis there will be around 1mm gap. However as a workaround, it seems that top part of the module chassis, is very easy to remove, which would most likely completely remove any compatibility issues.
61	Phoenix Audio	Gyrator EQ	Yes
62	Pultec	EQP-500X	Yes
63	Radial	EXTC 500	Yes
64	Retro	Doublewide II	Yes
65	Retro	500PRE	Yes
66	Ruper Neve Designs	542	Yes
67	Ruper Neve Designs	511	Yes
68	Ruper Neve Designs	551	Yes
69	Ruper Neve Designs	535	Yes
70	Ruper Neve Designs	543	Yes
71	Ruper Neve Designs	517	Yes
72	Ruper Neve Designs	545	Yes
73	Serpent Audio	Splice	Yes
74	Serpent Audio	SB4001	Yes
75	Shadow Hills Industries	Mono Gama	No
76	SPL	HPm	Yes
77	SPL	BIG	Yes
78	SPL	TDx Transient Designer	Yes
79	SSL	611 EQ	Yes
80	SSL	G Comp	Yes
81	SSL	SiX Channel	Yes
82	SSL	UVEQ	Yes
83	SSL	VHD+	Yes
84	Tegeler Audio	Vocal Leveler	Yes
85	Zähl	EQ1	Yes
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100