ABCDEFGHIJKLMNOPQRSTUVWXYZAA
1
Links
Paper No.
1st Author
Surname		1st Author
First name		Proceeding's
Volume		Page
start		Page
end 		DOI
Full DOITitle
2
336.pdf336Abu BakarNabilah 2916926
10.18552/2024/SCMT/336
https://doi.org/10.18552/2024/SCMT/336
DESIGN OPTIMIZATION OF RC STRUCTURE UTILIZING BLENDED CONCRETE
3
133.pdf133AgunbiadeTaiwo 1347360
10.18552/2024/SCMT/133
https://doi.org/10.18552/2024/SCMT/133
PHYSICAL, MECHANICAL AND CHEMICAL PROPERTIES OF NANOCELLULOSE FIBRE REINFORCED MORTAR
4
125.pdf125AhmadShamsad 1311324
10.18552/2024/SCMT/125
https://doi.org/10.18552/2024/SCMT/125
NON-CARBONATE ALKALI-ACTIVATED BINDERS UTILIZING NATURAL POZZOLAN, LIMESTONE POWDER, SILICOMANGANESE FUME, AND RED MUD
5
124.pdf124Al Ashaibi Azedin 1300310
10.18552/2024/SCMT/124
https://doi.org/10.18552/2024/SCMT/124
TRIAXIAL TEST OF HYDRATED LIME ON THE MECHANICAL PROPERTIES OF HOT MIX ASPHALT CONCRETE
6
333.pdf333AldhaherDunya 2883897
10.18552/2024/SCMT/333
https://doi.org/10.18552/2024/SCMT/333
HOW CAN BUILDING INFORMATION MODELLING (BIM) TOOLS AND WORKFLOWS ASSIST ARCHITECTS TO OPTIMISE THEIR DESIGN AND ACHIEVING ENERGY EFFICIENCY RESULTS?
7
507.pdf507AlengaramU. Johnson 16274
10.18552/2024/SCMT/507
https://doi.org/10.18552/2024/SCMT/507
DEVELOPMENT OF SUSTAINABLE HOMEBREWED SODIUM SILICATE AND ITS EFFECTIVENESS IN GEOPOLYMER MORTARS
8
131.pdf131AmaniAli 1335346
10.18552/2024/SCMT/131
https://doi.org/10.18552/2024/SCMT/131
MECHANICAL IMPACTS OF COMPLETE AGGREGATE SUBSTITUTION IN ALKALI ACTIVATED CONCRETE PAVEMENT
9
107.pdf107AnwarFaiz Habib 1222230
10.18552/2024/SCMT/107
https://doi.org/10.18552/2024/SCMT/107
EFFECT OF COMBINED REPLACEMENT OF CEMENT AND AGGREGATES ON THE PERFORMANCE OF PERVIOUS CONCRETE
10
231.pdf231AyaneKikuchi 2578587
10.18552/2024/SCMT/231
https://doi.org/10.18552/2024/SCMT/231
DYNAMIC COLLAPSE SIMULATION INCLUDING LARGE DISPLACEMENTS AND ROTATION BEHAVIOR OF CONCRETE MEMBERS USING EXTENDED RBSM
11
603.pdf603BoakyeKwabena 1104111
10.18552/2024/SCMT/603
https://doi.org/10.18552/2024/SCMT/603
INFLUENCE OF CURING TEMPERATURE ON THE HYDRATION AND MECHANICAL PROPERTIES OF MORTAR PREPARED WITH PARTIALLY REPLACED CALCINED CLAY
12
203.pdf203Bouzinac Solène 1407418
10.18552/2024/SCMT/203
https://doi.org/10.18552/2024/SCMT/203
RHEOLOGICAL PROPERTIES OF EXTRUDED STABILIZED EARTH
13
136.pdf136CândidoTaíssa 1388403
10.18552/2024/SCMT/136
https://doi.org/10.18552/2024/SCMT/136
CHLORIDE-INDUCED CORROSION OF STEEL REBARS IN CONCRETE WITH LOW BINDER CONTENT
14
226.pdf226CorominasAndreu 2538550
10.18552/2024/SCMT/226
https://doi.org/10.18552/2024/SCMT/226
IMPROVING THE PROP ERTIES OF RECYCLED CONCRETE BY USING SURFACE TREATED FINE MIXED RECYCLED AGGREGATES
15
301.pdf301ElmezayenYoussef 2672683
10.18552/2024/SCMT/301
https://doi.org/10.18552/2024/SCMT/301
RETROFITTING OF SEVERELY CORRODED CONTINUOUS RC BEAMS WITH C-FRCM COMPOSITES
16
126.pdf126Fadele
Oluwadamilola
1325334
10.18552/2024/SCMT/126
https://doi.org/10.18552/2024/SCMT/126
CRUSHED ANDESITE POWDER AS A CEMENT FILLER MATERIAL – EFFECT ON STRENGTH AND DURABILITY PROPERTIES
17
218.pdf218FantilliAlessandro 1469480
10.18552/2024/SCMT/218
https://doi.org/10.18552/2024/SCMT/218
LINKING MICROSTRUCTURE ASPECTS AND MECHANICAL BEHAVIOUR OF WOOL REINFORCED COMPOSITES
18
227.pdf227FrassonBruna 2551562
10.18552/2024/SCMT/227
https://doi.org/10.18552/2024/SCMT/227
ALKALI-ACTIVATED HYBRID MORTARS ANALYZED BY ELECTRICAL IMPEDANCE SPECTROSCOPY
19
121.pdf121FujimotoYohei 1282290
10.18552/2024/SCMT/121
https://doi.org/10.18552/2024/SCMT/121
EVALUATION OF FLY ASH CONTRIBUTION TO PERFORMANCES OF STEAM AND INTERNALLY CURED CONCRETE
20
314.pdf314FujimotoKonoka 2754765
10.18552/2024/SCMT/314
https://doi.org/10.18552/2024/SCMT/314
EXPERIMENTAL INVESTIGATION ON EVALUATION METHOD OF HARDENING BEHAVIOR OF GEOPOLYMER MORTAR USING ELECTRICAL RESISTANCE
21
239.pdf239FukudomeKazuto 2624637
10.18552/2024/SCMT/239
https://doi.org/10.18552/2024/SCMT/239
DEVELOPMENT OF A CURING PLANNING METHOD CONSIDERING BOTH LOW CARBONIZATION AND PRODUCTIVITY
22
317.pdf317FumotoTakayuki2766774
10.18552/2024/SCMT/317
https://doi.org/10.18552/2024/SCMT/317
OBSERVATION OF ASR EXPANSION CRACKS INSIDE CONSTRAINED MORTAR CYLINDER USING X-RAY CT
23
337.pdf337GhafooriNader 2927941
10.18552/2024/SCMT/337
https://doi.org/10.18552/2024/SCMT/337
Role of Fly Ash Types on Properties of Cement Based Mixtures
24
338.pdf338GhafooriNader 2942954
10.18552/2024/SCMT/338
https://doi.org/10.18552/2024/SCMT/338
EFFECT OF CURING TIME AND TYPE ON STRENGTH OF NON-PROPRIETARY BLENDED ULTRA-HIGH-PERFORMANCE CONCRETE
25
240.pd240GrahamKenneth 2638658
10.18552/2024/SCMT/240
https://doi.org/10.18552/2024/SCMT/240
COMPARING LIFE-CYCLE CARBON FOOTPRINTS OF INTERIOR FLOORING OPTIONS AND PROPOSING IMPROVED BUILDING LIFESPAN ASSESSMENT PROCESSES FOR SPECIFIERS
26
330.pdf330HagiwaraTaiki 2861870
10.18552/2024/SCMT/330
https://doi.org/10.18552/2024/SCMT/330
NON-CONTACT DETECTION OF CORRODED STEEL SHEET PILE THICKNESS USING HEAT BALANCE SIMULATION AND INFRARED THERMOGRAPHY
27
225.pdf225HaoHaoyu 2526537
10.18552/2024/SCMT/225
https://doi.org/10.18552/2024/SCMT/225
INFLUENCE OF WATER COMPENSATION ON MECHANICAL PERFORMANCE AND DURABILITY OF MIXED RECYCLED AGGREGATE CONCRETE
28
207.pdf207HayashidaHiroshi 1425435
10.18552/2024/SCMT/207
https://doi.org/10.18552/2024/SCMT/207
MECHANISM BY WHICH HORIZONTAL CRACKS ARE GENERATED IN A BRIDGE SLAB DUE TO FROST DAMAGE
29
105.pdf105HernándezMiriam1200210
10.18552/2024/SCMT/105
https://doi.org/10.18552/2024/SCMT/105
EFFECT OF HIGH GYPSUM CONTENTS IN MORTARS MADE WITH PORTLAND CEMENT AND ALKALI ACTIVATED SLAG
30
602.pdf602
Higuera-Florez
Camilo 191103
10.18552/2024/SCMT/602
https://doi.org/10.18552/2024/SCMT/602
OBTENTION OF THE CHLORIDE DIFFUSION COEFFICIENT OF FLY ASH BLENDED CONCRETE THROUGH RESISTIVITY MODELLING
31
205.pdf205HuXiaoou---
10.18552/2024/SCMT/205
https://doi.org/10.18552/2024/SCMT/205
A HYBRID GROUND SOURCE HEAT PUMP SYSTEM DESIGN FOR SMALL RESIDENTIAL BUILDINGS IN HOT-CLIMATE APPLICATIONS
32
504.pdf504HuQinxin 13539
10.18552/2024/SCMT/504
https://doi.org/10.18552/2024/SCMT/504
MICRO-MECHANISM OF ROCK FATIGUE
33
326.pdf326InoseSho 2817829
10.18552/2024/SCMT/326
https://doi.org/10.18552/2024/SCMT/326
A STUDY ON INPUT SETTINGS OF FULL-SCALE FEM FATIGUE ANALYSES FOR MAINTENANCE OF REINFORCED CONCRETE SLABS
34
322.pdf322Ito Hitoshi 2781792
10.18552/2024/SCMT/322
https://doi.org/10.18552/2024/SCMT/322
TEMPERATURE VARIATION ANALYSIS INSIDE CONCRETE DURING FREEZING AND THAWING BY HYDROTHERMAL COUPLED ANALYSIS
35
331.pdf331JiXi2871882
10.18552/2024/SCMT/331
https://doi.org/10.18552/2024/SCMT/331
MECHANICAL DEGRADATION PREDICTION OF MORTAR SPECIMENS UNDER FREEZE–THAW CYCLES CONSIDERING TIME-DEPENDENT FATIGUE DAMAGE
36
502.pdf502JinWei-Liang 11526
10.18552/2024/SCMT/502
https://doi.org/10.18552/2024/SCMT/502
EXPERIMENTAL STUDY ON THE CHLORIDE DIFFUSION OF CONCRETE BASED ON ITS PORE STRUCTURE
37
102.pdf102KachouhNancy1164175
10.18552/2024/SCMT/102
https://doi.org/10.18552/2024/SCMT/102
PERFORMANCE PREDICTION OF STEEL FIBER-REINFORCED RECYCLED AGGREGATES CONCRETE DEEP BEAMS WITH WEB OPENINGS
38
307.pdf307KenmokuShunsuke 2699707
10.18552/2024/SCMT/307
https://doi.org/10.18552/2024/SCMT/307
A FUNDAMENTAL STUDY ON ESTIMATION OF RELATIVE PERMITTIVITY DISTRIBUTION IN CONCRETE USING DATA ASSIMILATION
39
206.pdf206KobayashiMari 1419424
10.18552/2024/SCMT/206
https://doi.org/10.18552/2024/SCMT/206
CARBONATION TREATMENT OF RECYCLED COMPACTED CEMENT PASTE: EFFECT OF TEMPERATURE AND PRESSURE ON PHYSICAL PROPERTIES
40
221.pdf221KuriharaRyota 1481490
10.18552/2024/SCMT/221
https://doi.org/10.18552/2024/SCMT/221
EXPERIMENTAL AND NUMERICAL STUDY ON THE FLEXURAL RESPONSE OF CONCRETE BEAM REINFORCED WITH BASALT FRP BARS
41
211.pdf211LehmanDawn 1447459
10.18552/2024/SCMT/211
https://doi.org/10.18552/2024/SCMT/211
DEVELOPMENT OF 3D PRINTED CEMENTITIOUS MATERIALS: MIX AND MACHINERY DESIGN
42
501.pdf501LeiHaoran 1314
10.18552/2024/SCMT/501
https://doi.org/10.18552/2024/SCMT/501
THE APPLICATION OF PROBABILISTIC LIFE CYCLE ASSESSMENT TO BUILDINGS: A CASE STUDY
43
223.pdf223LimHorhok 2505515
10.18552/2024/SCMT/223
https://doi.org/10.18552/2024/SCMT/223
EFFECT OF CEMENT ADDITION ON SHRINKAGE PROPERTIES OF FLY ASH-BASED GEOPOLYMER
44
208.pdf208LinWei-Ting 1436446
10.18552/2024/SCMT/208
https://doi.org/10.18552/2024/SCMT/208
STUDY OF 3D PRINTING PERFORMANCES OF CEMENTLESS COLLOIDAL MATERIALS
45
328.pdf328LorikaDenis A 2839851
10.18552/2024/SCMT/328
https://doi.org/10.18552/2024/SCMT/328
ENVIROMENTAL LIFE CYCLE ASSESSMENT OF CACTUS MUCILAGE-MODIFIED CONCRETE
46
134.pdf134LuytenKito 1361375
10.18552/2024/SCMT/134
https://doi.org/10.18552/2024/SCMT/134
DEVELOPMENT OF ECO-FRIENDLY ALKALI-ACTIVATED CONCRETE FOR 3D PRINTING
47
233.pdf233MangatPal 2588600
10.18552/2024/SCMT/233
https://doi.org/10.18552/2024/SCMT/233
ALKALINITY AND Cl-/OH- AFFECTING REINFORCEMENT CORROSION IN ALKALI ACTIVATED CONCRETE
48
104.pdf104
Manso-Morato
Javier1188199
10.18552/2024/SCMT/104
https://doi.org/10.18552/2024/SCMT/104
SUITABILITY OF CONCRETE PRODUCED WITH HIGH CONTENTS OF CRUSHED WIND-TURBINE BLADE
49
112.pdf112MartinsJulia 1231242
10.18552/2024/SCMT/112
https://doi.org/10.18552/2024/SCMT/112
INFLUENCE OF ZETA POTENTIAL ON THE PROPERTIES OF READY-MIX-MORTARS WITH WASTE ADDITION
50
334.pdf334MikataYasuhiro 2898907
10.18552/2024/SCMT/334
https://doi.org/10.18552/2024/SCMT/334
SHEAR CAPACITY OF PC BEAMS DAMAGED BY ASR
51
310.pdf310MitsunagaKoki 2719730
10.18552/2024/SCMT/310
https://doi.org/10.18552/2024/SCMT/310
VISUALIZATION OF INTERNAL DEFECTS IN CONCRETE USING RADAR IMAGES AND GENERATIVE ADVERSARIAL NETWORKS
52
324.pdf324MohammadiAbbas 2793804
10.18552/2024/SCMT/324
https://doi.org/10.18552/2024/SCMT/324
LIFE CYCLE ANALYSIS OF CONCRETE CONTAINING SUPPLEMENTARY CEMENTITUOIS MATERIALS CONSIDERING ECONOMIC AND ENVIRONMENTAL ASPECTS
53
118.pdf118MohammedTarek 1257269
10.18552/2024/SCMT/118
https://doi.org/10.18552/2024/SCMT/118
TREATMENTS FOR THE IMPROVEMENT OF RECYCLED BRICK AGGREGATE
54
119.pdf119MohammedTarek 1270281
10.18552/2024/SCMT/119
https://doi.org/10.18552/2024/SCMT/119
REUSE OF RETURN CONCRETE SLURRY WASTE IN MORTAR
55
325.pdf325NadezhdaMorozova 2805816
10.18552/2024/SCMT/325
https://doi.org/10.18552/2024/SCMT/325
FRACTURE BEHAVIOUR ASSESSMENT OF PRECRACKED CONCRETE BY AE AND DIC PARAMETERS IN COMPRESSIVE STRESS FIELD
56
312.pdf312NagaokaShuji 2731743
10.18552/2024/SCMT/312
https://doi.org/10.18552/2024/SCMT/312
AN ANALYTICAL STUDY ON ELECTRICAL PROPERTIES OF SILANE-TREATED CONCRETE
57
606.pdf606OkekeFrancis 1136150
10.18552/2024/SCMT/606
https://doi.org/10.18552/2024/SCMT/606
ASSESSMENT OF COMPRESSIVE STRENGTH PERFORMANCE OF CORN COB ASH BLENDED CONCRETE: A REVIEW
58
222.pdf222PepinAntoine 1491502
10.18552/2024/SCMT/222
https://doi.org/10.18552/2024/SCMT/222
EXPERIMENTAL REVIEW OF GFRP REBARS IN COMPRESSION AFTER SIMULATED MARINE CONDITIONING USING NOVEL TESTING METHOD
59
605.pdf605RashidSarmad 1122135
10.18552/2024/SCMT/605
https://doi.org/10.18552/2024/SCMT/605
EXPLORING THE POTENTIAL OF STUBBLE WASTE BIOCHAR AS SUSTAINABLE CONSTRUCTION MATERIAL
60
106.pdf106RazaJehangeer 1211221
10.18552/2024/SCMT/106
https://doi.org/10.18552/2024/SCMT/106
PERFORMANCE ASSESSMENT OF AGGREGATES MADE FROM THE MARINE SEDIMENTS AND INDUSTRIAL WASTE
61
103.pdf103
Revilla-Cuesta
Victor1176187
10.18552/2024/SCMT/103
https://doi.org/10.18552/2024/SCMT/103
DURABILITY IN ABRASION TERMS OF A FULL-SCALE POROUS BITUMINOUS MIXTURE MANUFACTURED WITH LADLE FURNACE SLAG
62
402.pdf402Rute CostaAna 2956968
10.18552/2024/SCMT/402
https://doi.org/10.18552/2024/SCMT/402
A ROADMAP TO ACCELERATE MATERIAL REUSE IN CONSTRUCTION AND USE MATERIALS PASSPORTS
63
601.pdf601ShaabanIbrahim G17790
10.18552/2024/SCMT/601
https://doi.org/10.18552/2024/SCMT/601
PERMEATION CHARACTERISTICS AND DURABILITY ASPECTS FOR SUSTAINABLE CONCRETE
64
303.pdf303ShajiNikki Maria 2684693
10.18552/2024/SCMT/303
https://doi.org/10.18552/2024/SCMT/303
CHARACTERIZATION OF AN IRISH SOURCE OF COAL-FIRED FLY ASH AS A CEMENT REPLACEMENT
65
329.pdf329Shibano Kazuma 2852860
10.18552/2024/SCMT/329
https://doi.org/10.18552/2024/SCMT/329
QUANTITATIVE DETECTION OF DELAMINATION IN REINFORCED CONCRETE ROAD WALL BY INFRARED THERMOGRAPHY WITH HEAT BALANCE SIMULATION
66
308.pdf308ShimboHiroshi 2708718
10.18552/2024/SCMT/308
https://doi.org/10.18552/2024/SCMT/308
INVESTIGATION OF MACHINE LEARNING METHOD WITH GENERALLIZATION PERFORMANCE FOR AUTOMATIC HAMMERING TEST
67
236.pdf236ShresthaAnil Ratna 2601611
10.18552/2024/SCMT/236
https://doi.org/10.18552/2024/SCMT/236
PROPERTIES OF ARTIFICIAL AGGREGATES MADE FROM RECYCLED AUTOCLAVED AERATED CONCRETE (AAC) POWDER AND HIGH-VOLUME FLY ASH MORTAR
68
122.pdf122SolankiPranshoo 1291299
10.18552/2024/SCMT/122
https://doi.org/10.18552/2024/SCMT/122
INVESTIGATION OF WASTE GLASS-BASED SODIUM SILICATE ACTIVATOR COMBINED WITH INDUSTRIAL BY-PRODUCTS IN GEOPOLYMER CONCRETE
69
224.pdf224TakahashiHayato 2516525
10.18552/2024/SCMT/224
https://doi.org/10.18552/2024/SCMT/224
STUDY ON 3D MESOSCALE STRUCTURAL ANALYSIS OF CRACKING BEHAVIOUR BY SCDA TOWARDS THE BETTER DEMOLITION
70
304.pdf304TakahashiKeisuke 2694698
10.18552/2024/SCMT/304
https://doi.org/10.18552/2024/SCMT/304
EFFECT OF CARBONATION RATE OF PORTLAND CEMENT PASTE USING AMINO ACID-BASED MIXTURES
71
319.pdf319TakahashiKeisuke 2775780
10.18552/2024/SCMT/319
https://doi.org/10.18552/2024/SCMT/319
EFFECT OF LIQUID WATER PENETRATION ON COMPRESIVE FATIGUE OF CEMENT-BASED MORTAR IN WATER
72
228.pdf228TakeshiIyoda 2563569
10.18552/2024/SCMT/228
https://doi.org/10.18552/2024/SCMT/228
A Study of DEF Expansion Suppression Mechanism by Ground Granulated Blast Furnace Slag
73
115.pdf115TelescaAntonio 1243256
10.18552/2024/SCMT/115
https://doi.org/10.18552/2024/SCMT/115
HYDRATION PROPERTIES AND TECHNICAL BEHAVIOUR OF BLENDED BELITE CALCIUM SULFOALUMINATE CEMENTS
74
214.pdf214ThuEi Myat 1460468
10.18552/2024/SCMT/214
https://doi.org/10.18552/2024/SCMT/214
INVESTIGATION ON CARBONATION AND CHLORIDE PENETRATION RESISTANCE OF CONCRETE USING COAL GASIFICATION SLAG
75
335.pdf335ToskaKlajdi 2908915
10.18552/2024/SCMT/335
https://doi.org/10.18552/2024/SCMT/335
REPAIR OF HIGH TEMPERATURE DAMAGED CONCRETE THROUGH TEXTILE REINFORCED COMPOSITES
76
327.pdf 327
Trochoutsou
Niki 2830838
10.18552/2024/SCMT/327
https://doi.org/10.18552/2024/SCMT/327
DURABILITY OF FLAX TEXTILE-REINFORCED MORTAR SYSTEMS
77
237.pdf237Vidanalage
Nuwan Padukka
2612623
10.18552/2024/SCMT/237
https://doi.org/10.18552/2024/SCMT/237
EXPERIMENTAL INVESTIGATION OF THE EMBEDMENT STRENGTH OF LAMINATED VENEER LUMBER (LVL)
78
505.pdf505WangHuachuan 14046
10.18552/2024/SCMT/505
https://doi.org/10.18552/2024/SCMT/505
DURABILITY ANALYSIS OF CONCRETE FOR UNDERGROUND THERMAL ENERGY STORAGE
79
604.pdf604WibowoAndi 1112121
10.18552/2024/SCMT/604
https://doi.org/10.18552/2024/SCMT/604
EVALUATING THE QUALITY OF LIGHTWEIGHT CONCRETE MADE FROM COATED EPS AGGREGATES USING ULTRASONIC PULSE VELOCITY
80
506.pdf506XiXun 14761
10.18552/2024/SCMT/506
https://doi.org/10.18552/2024/SCMT/506
TIME-DEPENDENT RELIABILITY ANALYSIS OF NON-UNIFORM CORROSION-INDUCED CONCRETE CRACKING
81
607.pdf607XuZhiqi 1151161
10.18552/2024/SCMT/607
https://doi.org/10.18552/2024/SCMT/607
ORIENTED THERMAL CONDUCTIVE COMPOSITE PHASE-CHANGE MATERIAL ENABLED BY ORIENTED EXPANDABLE GRAPHITE SKELETON FOR HEAT STORAGE
82
135.pdf135YamamotoShinya 1376387
10.18552/2024/SCMT/135
https://doi.org/10.18552/2024/SCMT/135
VERSATILITY AND DECARBONIZING EFFECT OF CONCRETE MIXED WITH BIOCHAR
83
313.pdf313YamamotoHinata 2744753
10.18552/2024/SCMT/313
https://doi.org/10.18552/2024/SCMT/313
STUDY ON ESTIMATION OF INTERNAL CRACKS IN REINFORCED CONCRETE BY ELECTROMAGNETIC WAVES USING MACHINE LEARNING
84
229.pdf229YurikaNoguchi 2570577
10.18552/2024/SCMT/229
https://doi.org/10.18552/2024/SCMT/229
SUGGESTION FOR ENVIRONMENTALLY FRIENDLY TSC WITH OPTIMIZED GROUTING MATERIALS
85
241.pdf241ZeadatZayed F2659670
10.18552/2024/SCMT/241
https://doi.org/10.18552/2024/SCMT/241
CARBON EMISSIONS IN JORDAN'S CONSTRUCTION SECTOR: AN EXAMINATION OF OBSTACLES
86
503.pdf503ZhangFeng 12734
10.18552/2024/SCMT/503
https://doi.org/10.18552/2024/SCMT/503
ELECTROCHEMICAL BEHAVIOUR OF ALKALI-ACTIVATED CONCRETE
87
88
89
90
91
92
93
94
95
96
97
98
99
100