Pre-installation checklist

	A	B	C	D	E
1	N°	Task	Details	Status	Comments
2	Site preparation
3	1	Verify power source	Grid, PV, Genset	Completed
4	2	Confirm voltage rating	For all devices	Not completed
5	3	Grounding system	Properly tested
6	4	Area clean & dry	Suitable for installation
7	5	Equipment protected from elements	Temperature, humidity, dust
8	Tools and equipment
9		Required tools
10	6		Flathead screwdriver
11	7		Crimping tool
12	8		Wire stripper
13	9		Bootlace ferrules
14	10		Electrical wires :
15			Black for negative (-)
16			Red for positive (+)
17			Yellow/Green fro ground (GND)
18		Required equipment
19	11		Elum's device
20	12		Power supply
21	13		UPS (optional)
22	14		Laptop
23	15		RJ45-to-RJ45 Ethernet cable
24	16		USB to RJ45 adapter (if your laptop lacks a LAN port)
25	Power supply setup
26	17	Power supply voltage	Within Elum's device range
27	18	UPS installed	Backup tested and functional
28	19	Surge protectors	Installed and tested
29	Communication setup
30	20	RS485 devices	Number of devices verified
31	21	Ethernet setup	IP Addresses and subnet mask configured
32	Documentation and settings
33	22	Manuals and data sheets	Gathered for all equipment
34	Final confirmation
35	23	Cross-check checklist items	Final review before installation
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100