Final LifeTrac 6 BOM V.09-01-13
 Share
The version of the browser you are using is no longer supported. Please upgrade to a supported browser.Dismiss

Comment only
 
 
ABCDEFGHIJKLMNOPQRSTU
1
PartLinkQuantityPriceItem NumberNotes
2
3
1 7/8" Bearingshttps://www.surpluscenter.com/item.asp?item=1-210-30-4&catname=powerTrans1619.95Item# 1-210-30-4
4
5
8 are for the second set of wheel mounts and then we are using one more for each of the 8 wheel mounts on the outside instead of the more expensive bearing in the first photo -->
6
7
8
9
10
11
12
13
14
15
16-tooth sprocket w/ 1 7/8" borehttps://www.surpluscenter.com/item.asp?item=1-2145-16-N&catname=powerTrans420.95tem# 1-2145-16-NWelding done at Sweiger Shop
16
17
This does not require any welding. Last time, was there a reason we ordered the sprockets and sleeves separately and then welded them?
18
19
20
21
22
23
24
25
26
16-tooth sprocket w/ 5-hole plate for bolting to motor drumshttps://www.surpluscenter.com/item.asp?item=1-2823-16&catname=powerTrans410.5Item# 1-2823-16Welding and machining done at Sweiger Shop
27
28
Q: Last time we ordered these, they had a 15/16" hole with a key way. We don't use that hole, so it seems we could go with these sprockets with unfinnished bore holes. They are 1/2 the price. A: They will be 5x the price after they are bored out and keyway broached.
29
30
How do we put in an order to Sweiger Shop for the mounting plates?4Shop time
31
32
33
34
2 SPOOL 25 GPM JOYSTICK LOADER CONTROL VALVEhttps://www.surpluscenter.com/item.asp?item=9-4782&catname=hydraulic1293.95For Drive System
35
36
37
38
39
40
41
42
3 SPOOL 25 GPM JOYSTICK LOADER VALVE W/ GRAPPLEhttps://www.surpluscenter.com/item.asp?item=9-8217&catname=hydraulic1381.95For Loader Arms and Aux
43
44
45
46
47
48
ITEM NOT NAMEDhttps://www.surpluscenter.com/item.asp?item=1-3206&catname=misc199.95Item# 1-3206Seat Slides available on Surplus Center are the same as the ones that come with this seat.
49
50
51
52
53
3" X 8" X 2" DOUBLE-ACTING HYDRAULIC CYLINDERhttp://www.surpluscenter.com/item.asp?item=9-9273&catname=hydraulic174.99Item# 9-9273There is one center cylinder for the tilt.
54
55
56
57
58
2" X 32" X 1.25" DOUBLE-ACTING HYDRAULIC CYLINDERhttp://www.surpluscenter.com/item.asp?item=9-7710-32&catname=hydraulic2195.95Item# 9-7710-32The cylinder in the image is not the one described.
59
60
61
62
63
SAE 8 plughttp://www.surpluscenter.com/item.asp?item=9-6408-8&catname=hydraulic20.95Item# 9-6408-8 This is for the CEB manifolds T2 port
64
65
66
67
68
1/2 NPT 30 GPM 1500-3000 PSI HYD CUSHION VALVEhttps://www.surpluscenter.com/item.asp?item=9-4019-50-H&catname=hydraulic2 - 470.95Item# 9-4019-50-H We have 3 and need a total of 5. Should we order more to have a few on hand?
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Loading...