F10 Cheatsheet
 Share
The version of the browser you are using is no longer supported. Please upgrade to a supported browser.Dismiss

View only
 
ABCDEFG
1
ModuleSectionFunction ValueNew valueDefaultDescriptionTRY IT AT YOUR OWN RISK !
2
3
ACSM3001GWF_SBR_WARNDAUERWerte = 01 (for 1 second)wert_01 / Werte=5AComment = duration of the SBR (Seatbelt Reminder) warnings (typically 90s) - 5A HEX = 90 Decimal
4
ACSM3000 AusstattungsflagsGurtzustandsanzeige_Beifahrer_GWF_GZA_BFnicht_aktiv / Werte=00aktiv / Werte=01Disable seat belt status display - passenger
5
ACSM3000 AusstattungsflagsGurtzustandsanzeige_Fahrer_GWF_GZA_FAnicht_aktiv / Werte=00aktiv / Werte=01Disable seat belt status display - driver
6
ACSM3000 AusstattungsflagsSBR_BF_GWF_SBR_BFnicht_aktiv / Werte=00aktiv / Werte=01Disable seat belt reminder - passenger
7
ACSM3000 AusstattungsflagsSBR_FA_GWF_SBR_FAnicht_aktiv / Werte=00aktiv / Werte=01Disable seat belt reminder - driver
8
ACSM3000 AusstattungsflagsSPW_BFnicht_aktiv / Werte=00aktiv / Werte=01Disable sound on disconnect SB - passenger
9
ACSM3000 AusstattungsflagsSPW_FAnicht_aktiv / Werte=00aktiv / Werte=01Disable sound on disconnect SB - driver
10
ACSM3000 AusstattungsflagsSeatBeltReminder_SBR_Fahrernicht_aktiv / Werte=00aktiv / Werte=01Disable seat belt reminder - passenger
11
ACSM3000 AusstattungsflagsSeatBeltReminder_SBR_Beifahrernicht_aktiv / Werte=00aktiv / Werte=01Disable seat belt reminder - driver
12
ACSM3000 AusstattungsflagsSBR_PreWarning_Fahrernicht_aktiv / Werte=00aktiv / Werte=01Disable sound on disconnect SB - driver
13
ACSM3000 AusstattungsflagsSBR_PreWarning_Beifahrernicht_aktiv / Werte=00aktiv / Werte=01Disable sound on disconnect SB - passenger
14
ACSM3000 AusstattungsflagsInitialwarnung_GWF_IWnicht_aktiv / Werte=00aktiv / Werte=01Disable initial seatbelt warning
15
CAS3000 TCTC_MSA_DEFAULT_OFFaktiv / Werte=01nicht_aktiv / Werte=00Turn Auto Start/Stop OFF by default
16
CAS3000 TCTC_MSA_MEMORYaktiv / Werte=01nicht_aktiv / Werte=00Sets car's Auto Start/Stop function to start in the last used setting (e.g. Off) when the engine is started
17
CAS3002 CLMER_KEYOUT_AUTOVRaktiv / Werte=01nicht_aktiv / Werte=00Unlocks doors when engine is stopped (start/stop button is pushed). Allows single pull to open doors.
18
CAS3002 CLMOPEN_RSCR_WITH_REMOTE_KEY_SPFNaktiv / Werte=01nicht_aktiv / Werte=00Comment = Remote Key opens with a 4th button tailgate or rear window (active)
19
CAS3002 CLMREAR_SCREEN_IS_PRIMARYaktiv / Werte=01nicht_aktiv / Werte=00Comment = Remote Key opens with 3rd button tailgate or rear window (active)Comment = Remote Key with 4th button (Special Function) activation - Enables Follow-Me-Home Lighting (Pathway Lighting) with short=press of Fob
20
CAS3002 CLMREMOTE_KEY_SPECIAL_FCTaktiv / Werte=01nicht_aktiv / Werte=00Button 4 (Panic Button).
21
CAS3003 FH MASTERKOMFORTSCHLIESSUNG_FBaktiv / Werte=01nicht_aktiv / Werte=00Closes mirrors + windows + moon roof through Key Fob - Requires ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN set to aktiv
22
CAS3003 FH MASTERKOMFORTSCHLIESSUNG_PAaktiv / Werte=01nicht_aktiv / Werte=00Closes mirrors + windows + moon roof through Comfort Access - Requires ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN set to aktiv
23
CAS3003 FH_MasterKMFRT_OEFF_HINTENwert_01 / Werte=05Comfort opening: Delay between front and rear windows - NOT TESTED
24
CAS3003 FH_MasterKMFRT_OEFF_SHDwert_01 / Werte=23Comfort opening: Delay between the rear windows and SHD (Moon Roof) - NOT TESTED
25
CAS3003 FH_MasterKMFRT_SCHL_VORNEwert_01 / Werte=05Connect Comfort: Delay between front and rear windows- NOT TESTED - Presumed Delay on Close
26
CAS3003 FH_MasterKOMFORT_SCHL_SHDwert_01 / Werte=23Connect Comfort: Delay between the front windows and SHD (Moon Roof) - NOT TESTED - Presumed Delay on Close
27
CAS3010 HKL_BEDIENUNGUSE_FBD4aktiv / Werte=01nicht_aktiv / Werte=00Comment = can be the key 4 the FBD (OP_KEY_BUT_SPFN) used for the opening of the HK. This feature is currently available for F11 and F07.
28
CMB_MEDIA/
HU_NBT
3001 TELEPHONE_PARAMETERINBAND_RINGINGaktiv / Werte=01nicht_aktiv / Werte=00Kommentar=The telephone ringtone is transferred to the Combox
29
CMB_MEDIA3001 TELEPHONE_PARAMETERRINGTONEring_tone2 / Werte=01 orring_tone2 / Werte=01Kommentar=Set the Ring Tone (if no Inband Ringing is set)ring_tone3 / Werte=02
30
CMB_MEDIA3006 TELEMATIKMY_INFO_SUPPORTED_POISIncrease CIC stored addresses/messages from 25 to 50
31
FRM3020ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSENaktiv / Werte=01nicht_aktiv / Werte=00By itself does nothing, yet if it is not set to aktiv, neither KOMFORTSCHLIESSUNG_FB nor KOMFORTSCHLIESSUNG_PA will work,Opening doors (FRONT) will not interrupt window roll up operation. Normally, if you open a door while the window is automatically rolling up, it will
32
FRM3020ASP_BORDSTEINAUTOMATIK_DELTAWerte=5AWerte=3B2 character hexadecimal value that determines the angle of the passenger side mirror when the car is put into reverse
33
FRM3030FH_TUER_AUF_STOP_MAUTnicht_aktiv / Werte=00aktiv / Werte=01stop the operation. This feature disables it. May need to wait for iDrive to reset for activationnicht_aktiv / drl_h / drl_l /
34
FRM3050DRL_MODUSdrl_s / Werte=03bottom); 4: TFL_S via separate TFLeuchte; ECE Xenon (rings + bottom); 5: TFL_ECE (North Country Comfort); 6: DRL_S_ohne_SL via separate/ drl_s_ohne_sl /TFLeuchte without taillight / tail lights, U.S.; 7: TFL_S_ohne_SL via separate TFLeuchte without tail light / rear light, ECE
35
FRM3050FLA_AUTO_AKTIVaktiv / Werte=01nicht_aktiv / Werte=00Set High Beam Assistant Defaukt to Automatic onComment = high beam flash: Light control on the vehicle page: 0: in-phase, 1: intermittent, left and right opposite phase - NOT TESTED -
36
FRM3050FLB_INTERMITTIERENDasynchron / Werte=01synchron / Werte=00Presumed to work in conjunction with FLB_NSWComment = high beam flashing: Control Fog Lights: 0: NSW inactive, 1: NSW blink as FL / TFL - No Noticeable Effect - NEEDS ADDITIONAL
37
FRM3050FLB_NSWaktiv / Werte=01nicht_aktiv / Werte=00TESTINGComment = Maximum actuating time of the 4th Button (Special Function key) of the
38
FRM3050FOMEHO_FFB_SPFN_TIMESLOTwert_01__400ms / Werte=030: no activation of FMH by FFB SPFN possible;1: 300 ms; 2: 350ms, 3 400ms, 4: 450ms;5: 500 ms; 6: 550ms; 7: 600 ms;
39
FRM3050FOMEHO_TIMEOUTwert_01 / Werte=28FollowMeHome: Activation time - NOT TESTEDwert_01__100% /wert_02__50% /
40
FRM3050HELLIGKEIT_DRLwert_03__54% /wert_01__100% / Werte=64Daytime Running Light (DRL) Brightness in % - NOT TESTEDwert_04__80% /
41
FRM3050HELLIGKEIT_FL_BIXENONwert_01 / Werte=64High Beam Brightness in % - NOT TESTED
42
FRM3050NSW_AUS_BEI_FLnicht_aktiv / Werte=00aktiv / Werte=01Change to nicht_aktiv to enbale Fog Lights with High Beams / Flashers - Works for Some and not others - Reason Unknownnicht_aktiv / soft_on /
43
FRM3050WL_FUNKTION_ALnicht_aktiv / Werte=00Welcome Lights - Low Beam Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)hard_on / soft_on_LEDnicht_aktiv / soft_on /
44
FRM3050WL_FUNKTION_FLnicht_aktiv / Werte=00Welcome Lights - High Beam - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)hard_on / soft_on_LEDnicht_aktiv / soft_on /
45
FRM3050WL_FUNKTION_KZLhard_on / Werte=02Welcome Lights - License Plate Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)hard_on / soft_on_LEDnicht_aktiv / soft_on /
46
FRM3050WL_FUNKTION_NSWnicht_aktiv / Werte=00Welcome Lights - Fog Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)hard_on / soft_on_LEDnicht_aktiv / soft_on /
47
FRM3050WL_FUNKTION_POLhard_on / Werte=02Welcome Lights - Position Lights (Angel Eyes and Front Side LED's) - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)hard_on / soft_on_LEDnicht_aktiv / soft_on /
48
FRM3050WL_FUNKTION_SSLhard_on / Werte=02Welcome Lights - Tail Lights - 0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp)hard_on / soft_on_LED
49
FRM3050WL_TIMEOUTwert_01 / Werte=14Welcome Light: Activation time - NOT TESTED
50
FRM3050ESS_ERSSCHEINUNGSBILDbremslicht blinkend (brake light flashing)flaechenvergroesserung (area enlargement)Brake Force Delay Option
51
FRM3050ESS_ON_VERZ(default for Europe (14 dec) 10 m/s2; default for US (10 dec) 8 m/s2)Brake Force Delay Option - This refers to deceleration speed
52
FRM3050ESS_GESCHW_SCHWELLE(default for Europe Werte=32 (50 dec) default for US Werte=05 (5 dec))Brake Force Delay Option - This refers to the threshold speed for activation
53
FRM3090AUSG_11_NSW_L_IS_INDICATORaktiv / Werte=01nicht_aktiv / Werte=00Expected Left Fog as Turn signal - No Noticeable Effect
54
FRM3090AUSG_12_NSW_R_IS_INDICATORaktiv / Werte=01nicht_aktiv / Werte=00Expected Right Fog as Turn signal - No Noticeable Effect
55
HKFM3010SCH_FBDaktiv / Werte=01nicht_aktiv / Werte=00Button on key fob will be enabled to CLOSE the trunk - Does not work immediately; Allow for some time before it begins to work. Must enable TASTER_FBD
56
HKFM3010SCH_TOEHKIaktiv / Werte=01nicht_aktiv / Werte=00Button on driver-side will be enabled to CLOSE the trunk - Does not work immediately; Allow for some time before it begins to work
57
HKFM3010TASTER_FBDaktiv / Werte=01nicht_aktiv / Werte=00Use w/ Above
58
HU_CIC / HU_NBT3000 HMICDMM_ES_ALBUM_INFOaktiv / Werte=01nicht_aktiv / Werte=00Album-info on / off - No Noticeable Effect - NEEDS ADDITIONAL TESTING
59
HU_CIC / HU_NBT3000 HMICOMFORT_OPENINGaktiv / Werte=01nicht_aktiv / Werte=00This adds a new option "Comfort Acess" in Settings--->door locks-->Lock Button..Works same as "All Doors" NEEDS ADDITIONAL TESTINGperm_off / Werte=00 or
60
HU_CIC / HU_NBT3000 HMIDAYDRIVING_LIGHTstandard / Werte=02 orstandard / Werte=02tick/untick this option. Useful for countries where DRL is not mandatory.perm_on / Werte=01
61
HU_CIC / HU_NBT3000 HMIEFF_DYN_SAILINGaktiv / Werte=01nicht_aktiv / Werte=00Kommentar=Scheunert Bernd EI-42 - No Noticeable EffectEnable Efficient Dynamics Sport CID
62
HU_CIC / HU_NBT3000 HMIEFF_DYN_SPORT_CIDaktiv / Werte=01nicht_aktiv / Werte=00even after enabling EFF_DYN_SPORT_UNIT, in which case see KOMBI / 3008 PIA_Einheiten / DREHMOMENT and LEISTUNG forworkaround to force units in hp and ft lb. For 550i cars the gauges appear, but do not function at all - presume the issue is with the
63
HU_CIC / HU_NBT3000 HMIEFF_DYN_SYS_CIDaktiv / Werte=01nicht_aktiv / Werte=00"Configure ECO PRO" to the Settings=>Driving mode screen. Since there is no actual ECO PRO Functionality, as it is not part of the MY 2011 DynamicDriving Control, "Configure ECO PRO" in nonfunctional.
64
HU_CIC / HU_NBT3000 HMIHELLIGKEIT_AMBILIGHTAdds "Brightness” Slider (-5/+5) on Settings=>Lights Screen. Slider is non-functionalDisplays B & O sound menu - Removes L7 Surround Checkbox and Adds Bang & Oulfsen Menu to Settings=>Tone Screen with Studio and Expanded
65
HU_CIC / HU_NBT3000 HMIHIGH_END_AUDIO_MENUEvolle inszkein_menue / Werte=00Settings - Nonfunctional
66
HU_CIC / HU_NBT3000 HMIHUD_DISTANCE_INFOaktiv / Werte=01nicht_aktiv / Werte=00Enables Adapative Cruise Control iBrake Distance in HUD- NOT TESTED
67
HU_CIC / HU_NBT3000 HMIHUD_TURNSIGNALaktiv / Werte=01nicht_aktiv / Werte=00in Settings=>Heads-Up Display to work. Check Box does NOT appear on 2013.Replaces "Surround" on/off checkbox with "L7 Surround" Slider (-5/+5) on Settings=>Tone screen. - Slider still appears to function as off (full
68
HU_CIC / HU_NBT3000 HMIL7_SURROUND_CONFIGaktiv / Werte=01nicht_aktiv / Werte=00left) and on (any setting other than full left).Changes "Surround" on/off Checkbox to "L7 Surround" checkbox and adds the Logic7 Logo to right of the L7 Surround Checkbox on Settings=>Tone
69
HU_CIC / HU_NBT3000 HMILOGIC7_SYMBOLaktiv / Werte=01nicht_aktiv / Werte=00Screen.Enables "Digital tachometer" checkbox on Settings=>Info Display screen. Can not be checked - non functional. NEEDS ADDITIONAL TESTING
70
HU_CIC / HU_NBT3000 HMIM_DIGITAL_TACHOaktiv / Werte=01nicht_aktiv / Werte=00and with HUDM tachometer units - Adds "Digital tach.:" to the Settings=>Language/Units screen; however, the choices between kmh and mph can not be set.
71
HU_CIC / HU_NBT3000 HMIM_DIGITAL_TACHO_EINHaktiv / Werte=01nicht_aktiv / Werte=00NEEDS ADDITIONAL TESTING and with HUD
72
HU_CIC / HU_NBT3000 HMIM_KEY_SETTINGSaktiv / Werte=01nicht_aktiv / Werte=00M key settings available - No Noticeable Effect - NEEDS ADDITIONAL TESTINGAdds "M Drive 1" & "M Drive 2" on Settings screen; however, DSC, Engine, Chassis, and Steering settings can not be set - Nonfunctional. Also adds
73
HU_CIC / HU_NBT3000 HMIMDRIVEaktiv / Werte=01nicht_aktiv / Werte=00"M dynamic driving syst." checkbox on Settings=>Info Display screen. When checked it completely turns off the dashboard tachometer EfficientDynamics display. - Nonfunctional
74
HU_CIC / HU_NBT3000 HMIMOMENTDISTRIBUTION_MENUaktiv / Werte=01nicht_aktiv / Werte=00Adds menu for xDrive Torque Distribution - NOT TESTED
75
HU_CIC / HU_NBT3000 HMINAVI_DEST_EXPORTaktiv / Werte=01nicht_aktiv / Werte=00Kommentar=Memorized Point Export feature (via USB) is coded or not (Asia only)
76
HU_CIC / HU_NBT3000 HMINAVI_DEST_IMPORTaktiv / Werte=01nicht_aktiv / Werte=00Kommentar=Memorized Point Import feature (via USB) is coded or not (Asia only)Go to "Route Information" on iDrive when you're going somewhere and it will tell you at what point(s) along your journey you'll likely need to fill up.
77
HU_CIC / HU_NBT3000 HMINAVI_FUELSTOP_PROPOSALaktiv / Werte=01nicht_aktiv / Werte=00You can then select that notice and it will tell you about the stations in the area at that point on your trip.
Active by default on 2013
Active by default on 2013
78
HU_CIC / HU_NBT3000 HMINAVI_FULL_GUIDINGPOPUPaktiv / Werte=01nicht_aktiv / Werte=00Kommentar=(This descibes whether the arrow popups are available in the main map window.)Kommentar=(This describes whether the arrow view is available as a map view in the main map.) - Adds "Arrow View" to Navigation=>Map=>Map
79
HU_CIC / HU_NBT3000 HMINAVI_MAP_ARROWVIEWaktiv / Werte=01nicht_aktiv / Werte=00views
80
HU_CIC / HU_NBT3000 HMINAVI_MYPOI_EXPORTaktiv / Werte=01nicht_aktiv / Werte=00Kommentar=TMyPOI Export feature (via USB) is coded or not (not for Asia)Kommentar=MyPOI Import feature (via USB) is coded or not (not for Asia) - Adds "Import (USB)" to Navigation=>Map=>Points of Interest=>Option
81
HU_CIC / HU_NBT3000 HMINAVI_MYPOI_IMPORTaktiv / Werte=01nicht_aktiv / Werte=00Button=>Mappermanent / nicht_aktiv /
82
HU_CIC / HU_NBT3000 HMINAVI_RNC_MAINMAP_TEXTpermanent / Werte=FFKommentar=Describes, whether and how long the RNC infotext shall be shown on map10_sekunden
83
HU_CIC / HU_NBT3000 HMINAVI_ROAD_PREVIEWaktiv / Werte=01nicht_aktiv / Werte=00Road preview is possible or not- No Noticeable Effect - NEEDS ADDITIONAL TESTING
84
HU_CIC / HU_NBT3000 HMINAVI_ROUTE_RECORDaktiv / Werte=01nicht_aktiv / Werte=00Kommentar=Route record features are coded or not
85
HU_CIC / HU_NBT3000 HMINAVI_SPLIT_GUIDINGPOPUPnicht_aktiv / Werte=00aktiv / Werte=01Kommentar=(This descibes whether the arrow popups are available in the splitscreen.)
86
HU_CIC / HU_NBT3000 HMINAVI_TRIP_EXPORTaktiv / Werte=01nicht_aktiv / Werte=00Kommentar=Trip Export feature (via USB) is coded or not
87
HU_CIC / HU_NBT3000 HMINAVI_TRIP_IMPORTaktiv / Werte=01nicht_aktiv / Werte=00Kommentar=Trip Import feature (via USB) is coded or not - "Import trip (USB)" to Navigation=>Stored trips
88
HU_CIC / HU_NBT3000 HMINOTEPADaktiv / Werte=01nicht_aktiv / Werte=00Kommentar=Notepad available - No Noticeable Effect
89
HU_CIC / HU_NBT3000 HMIRSE_BRIGHTNESSaktiv / Werte=01nicht_aktiv / Werte=00Kommentar=enable RSE brightness - No Noticeable Effect
90
HU_CIC / HU_NBT3000 HMISPEEDLOCK_X_KMH_MAXvalue = FF (change the Werte value to FF)3_kmh = 3 or 8_kmh = 8Disable DVD Speedlock - Part 2
91
HU_CIC / HU_NBT3000 HMISPEEDLOCK_X_KMH_MINvalue = FF (change the Werte value to FF)3_kmh = 3 or 8_kmh = 8Disable DVD Speedlock - Part 1
92
HU_CIC / HU_NBT3000 HMIVIDEO_NUR_MIT_HANDBREMSE/
VIDEO_HANDBRAKE
nicht_aktiv / Werte=00aktiv / Werte=01Video just in combination with handbrake. Use w/ above SPEEDLOCK_X_KMH_MIN and SPEEDLOCK_X_KMH_MAX.
93
HU_CIC / HU_NBT3000 HMIENT_CODEC_OGGaktiv / Werte=01nicht_aktiv / Werte=00Enable playback of video files using OGG codec
94
HU_CIC / HU_NBT3000 HMIENT_CODEC_XVIDaktiv / Werte=01nicht_aktiv / Werte=00Enable playback of video files using XVID codec
95
HU_CIC / HU_NBT3000 HMIENT_CODEC_XVCDaktiv / Werte=01nicht_aktiv / Werte=00Enable playback of video files using XVCD codec
96
HU_CIC / HU_NBT3000 HMIENT_MC_VIDEO_SUPPORTaktiv / Werte=01nicht_aktiv / Werte=00Allows videos to be stored to the internal hard drive
97
HU_CIC / HU_NBT3001 EXBOXHUD_ACTIVATIONaktiv / Werte=01nicht_aktiv / Werte=00
98
HU_CIC / HU_NBT3001 EXBOXHUD_Maktiv / Werte=01nicht_aktiv / Werte=00Adds "M View" check box in HUD Displayed Information screen. Cannot be checked NEEDS ADDITIONAL TESTING
99
HU_CIC / HU_NBT3001 EXBOXLEGAL_DISCLAIMER_TIMEkein_ldld_mit_timeoutDisables iDrive legal disclaimer during iDrive startup. Change the value: ld_mit_timeout --> kein_ld
100
HU_CIC / HU_NBT3001 EXBOXMACRO_CAM_LEGALDISCLAIMERkein_ldld_mit_timeoutDisables camera legal disclaimer shown on PDC and Sideview
Loading...