teltonika fm series sms gprs commands

	A	B	C	D
1	TELTONIKA FM/FMA SERIES GPRS & SMS COMMANDS
2
3	The following information is used for setting up the GPS device with the correct configuration to work on the whitelabeltracking.com platform. You may use these commands with SMS or GPRS. GPRS commands only work when device is pointed to our servers and ignition on.
4
5	POINT TO:	data.gpsiot.net
6	PORT:	12070
7
8		SMS COMMANDS: Any commands sent via SMS must start with a user name and password. If you have not configured a device user name and password, you must use 2 spaces at start of SMS
9
10		Typical SMS format: <space><space>setparam #:#	1st # = ID value 2nd # = new parameter value
11		Typical GPRS format setparam #:#	1st # = ID value 2nd # = new parameter value
12
13
14
15
16
17	Initial configuration commands: (If not already done, these are the first commands that should be sent via SMS, dont forget 2 spaces at start)
18
19		command:	Description	Expected Response(some commands will not give response)
20		setparam 1240:1	enable gprs	Yes
21		setparam 1242:apnname	set apn	Yes
22		setparam 1243:apnuser	set apn user	Yes
23		setparam 1244:apnpass	set apn password	Yes
24		setparam 1245:data.gpsiot.net	set terminal serip or domain	Yes
25		setparam 1246:12070	set destination server port	Yes
26		setparam 1247:1	devine gprs transport protocol (udp or tcp ==0 or 1)	Yes
27
28
29	Mandatory configuration commands: (assumes device has been pointed to us with initial SMS)
30		command:	Description	Expected Response(some commands will not give response)
31		setparam 1540:3600	indicates time interval in seconds in order to acquire new record when stationary	Yes
32		setparam 1544:3600	indicates frequency (time interval in seconds) of sending data to server when stationary	Yes
33		setparam 1550:60	indicates time interval in seconds in order to acquire new record when in motion	Yes
34		setparam 1551:1000	indicates distance in meters in order to acquire new record	Yes
35		setparam 1552:30	indicates angle in degrees in order to acquire new record	Yes
36		setparam 1554:60	indicates frequency (time interval in seconds) of sending data to server when in motion	Yes
37		setparam 111,xx	set odometer where xx is the new odometer value	Yes
38		setparam 1283:1	enablelne odometer function/recording	Yes
39
40	Troubleshooting commands: (for best results use SMS)
41
42		command:	Description	Expected Response(some commands will not give response)
43		getstatus	Modem Status information	Yes
44		getops	List of currently available GSM operator	Yes
45		ggps	Google Map Link information	Yes
46		getgps	Current GPS data and time	No
47		cpureset	Reset CPU/reboot	No
48		resetprof	Reset all FLASH1 profile configuration to default profile	Yes
49		getver	Device / Modem / Code version information	Yes
50		getinfo	Device runtime system information	Yes
51		deleterecords	Delete all records saved on FLASH	No
52		getio	Readout digital inputs and outputs	Yes
53		getparam #	Readout parameter value according entered ID. # - ID value.	Yes
54		flush #,#,#,#,#,#,#	Initiates all data sending to specified target server 1.# - IMEI 2.# - APN 3.# - LOGIN 4.# - PASS 5.# - IP 6.# - PORT 7.# - MODE (0-TCP/1-UDP)	Yes
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100