ABCDEFGHIJKLMNOPQRSTUVWXYZ
1
SMS Commands List
2
DescriptionSMS command formatMeaningExample / Reply / Note
3
Address queryDWWhen the GPS signal is lost, send DW or 123 to start LBS positioningDW
4
123123
5
Coordinates queryWHERE#Latitude and longitude query Reply: Current position! Lat:N22.577156,Lon:E113.916748,Course:0.00,Speed:0.00Km/h,DateTime:2013-01-08 17:35:32
6
TimezoneGMT,P1,P2,P3#timezone settingP1: E/W East/west time zone
P2: 0-12 (hour) P3: 0/15/30/45 (minute)
e.g.: GMT,W,4,30#
7
IMEIIMEI,**********#change IMEI
8
IMEI,#imei query
9
APN SettingAPN,apn content#Set APN Data of SIM Card inside the GPS TrackerAPN,CMNET#
(notice: cmnet is China's mobile apn)
10
APN,apn content,apn user,apn password#
11
APN#Current APN Data query
12
Set tracking server / Home IP and Port of the serverSERVER,1,domain,port,0#set tracking server with domainserver,1,gw.gwgps12580.com,8005,0#
13
SERVER,0,ip address,port,0#set tracking server with ip addressSERVER,0,88888888,1111,0#
14
SERVER#Current tracking server querySERVER#
15
Restore factory defaultFACTORY#Restore factory settings (restore all settings except domain /APN/)FACTORY#
16
17
Machine Reboot RESET#After the command is sent, the terminal will restart after 1MINRESET#
18
Set center number, only center number can control the unit.CENTER,A,xxxxx#add center numberCENTER,A,13417411616#
19
CENTER,D#Delete center numberCENTER,D#
20
CENTER#Check current center number
21
Set SOS phone numbers to receive alarmsSOS,A,phone nunber1,phone number2#3 SOS phone numbers at most
22
SOS,D,phone nunber1,phone number2#Delete SOS phone numbers
23
SOS#Check current sos phone numbers
24
Check the statusSTATUS#Battery，GPS,GSM signal，ACC, DefenseSample: Reply:Battery:3.41V,Battery too low! Warning; GPRS:Link Up; GSM Signal Level:Strong; GPS:Successful positioning, SVS Used in fix:10(11), GPS Signal Level:32,31,32,31,28,29,29,36,32,33; ACC:OFF; Defense:OFF
25
Parameters queryPARAM#IMEI, center number，SOS number,working mode, timezoneExamples of replies:
Scheduled upload:
IMEI:868120103643505;TIMER:20,20; SENDS:5; SOS:13730454825,,; Center Number:; Sensorset:10,1,5,1; Defense time:10; TimeZone:E,8,0;
Fixed distance upload:
IMEI:868120103643505;Distance:200; SENDS:5; SOS:13730454825,,; Center Number:; Sensorset:10,1,5,1; Defense time:10; TimeZone:E,8,0;
26
Data uploading intervalTIMER,time 1,time 2#time 1= 5～18000 seconds; upload interval in ACC ON status; default value: 10
time 2= 5～18000 seconds; upload interval in ACC OFF status; default value: 10		In motion status, data inloading interval
27
TIMER#Check current data uploading interval
28
HBT uploading interval HBT,T1,T2#time 1= 1～5 mninutes; hear-beating time upload interval in ACC ON status;
time 2= 1～5 mninutes; hear-beating time upload interval in ACC OFF status;		At stationary or sleeping status, HBT interval
29
HBT#Check current HBT uploading interval
30
Vibration AlarmSENALM,ON,M#Turn on Vibration AlarmM=0～2；Alarm methods:
0 means GPRS，1 means SMS+GPRS，2 GPRS+SMS+CALL；default：0
31
SENALM,OFF#Turn off Vibration Alarm
32
SENALM#Check current setting
33
Movement AlarmMOVING,ON,R,M#Turn on Movement AlarmR=100～1000; Radius, in meters, default value: 300;
M=0～2; Alarm methods:
0 GPRS only, 1 SMS+GPRS; 2 GPRS+SMS+CALL; default value: 0;
34
MOVING,OFF#Turn off Movement Alarm
35
MOVING#Check current setting
36
Low-battery AlarmBATALM,ON,M#Turn On Low-battery AlarmM=0~1: 0 means GPRS，1 means SMS+GPRS, default is 0
37
BATALM,OFF#Turn off Low-battery Alarm
38
BATALM#Check current setting
39
Over-speed AlarmSPEED,ON,B,C,M#Turn On Over-speed AlarmB=5～600, seconds; Alarm time range; default value: 20 seconds
C=1～255km/h; over-speed value range; default value: 100km/h
M=0～1; Alarm reporting mode, 0 GPRS only, 1 SMS+GPRS; default value: 0
40
SPEED,OFF#Turn off Over-speed Alarm
41
SPEED#Check current setting
42
Power Failure AlarmPOWERALM,ON,M,10,300,0#Turn On Power Failure AlarmM=0～2; Alarm methods:
0 GPRS only, 1 SMS+GPRS; 2 GPRS+SMS+CALL; default value: 0;
43
POWERALM,OFF#Turn off Power Failure Alarm
44
POWERALM#Check current setting
45
Cut off and resume oil with relay (can be sent from center number)RELAY,1#Cut off the oil remotelyNote: The command can only execute with speed lower than 43km/h. If speed exceeds the safety limit: 43 km /h, Cut off the fuel supply operation delay execution!
46
RELAY,0#resume oil remotely
47
RELAY#Check current setting
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100