| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Test Number | Expected Label | LLM Result | LLM Step by Step Reasoning | Prompt Template | INSTRUCTION | OPTIONS | LLM | Prompt Number | |||||||||||||||||
2 | 1 | 1200-N - 3mm HPL Frts & HPL Ends NAUF PB Core | ** 1250-N - 3mm HPL Frts & TF Ends NAUF PB Core** | Let's go through the steps one by one to determine the correct series option. ### Step 1: Material Requirements - **Core Material**: The specification states that adhesives cannot contain urea formaldehyde. Therefore, we need to select a core material that is NAUF (No Added Urea Formaldehyde). - **Fronts Material**: The specification mentions "Plastic Laminate" and "Thermally Fused Laminate (TFL)". - **Fronts Thickness**: The specification mentions 3/4-inch particleboard for drawer fronts and doors. - **Ends Material**: The ends should match the fronts material. - **Fronts Edging**: The specification mentions 3 mm thick PVC edge-banding for doors and drawer fronts. - **Cabinet Edgebanding**: The specification mentions flat 1mm thick impact-resistant PVC edging for shelves. ### Step 2: Core Material Selection - Since adhesives with urea formaldehyde are prohibited, we select "No Added Urea Formaldehyde Particleboard (NAUF PB Core)". ### Step 3: Fronts Material Selection - The specification mentions "Plastic Laminate" and "Thermally Fused Laminate (TFL)". - Since TFL is more cost-effective, we will select TFL. ### Step 4: Fronts Thickness Determination - The specification mentions 3/4-inch particleboard for drawer fronts and doors. - We will select 3mm as it is the standard thickness for TFL. ### Step 5: Ends Material Selection - The ends should match the fronts material, which is TFL. ### Step 6: Fronts Edging Selection - The specification mentions 3 mm thick PVC edge-banding for doors and drawer fronts. - We will select 3mm Radius Edge. ### Step 7: Cabinet Edgebanding Selection - The specification mentions flat 1mm thick impact-resistant PVC edging for shelves. - We will select Flat (.020") PVC Cabinet Edgebanding. ### Step 8: Final Review - Ensure all selections are compatible with each other. - Verify that all requirements from the original specification have been addressed. ### Result Based on the above steps, the correct series option is: **RESULT: 1250-N - 3mm HPL Frts & TF Ends NAUF PB Core** This series option matches the core material (NAUF PB Core), fronts material (3mm TFL), ends material (TFL), fronts edging (3mm Radius Edge), and cabinet edgebanding (Flat (.020") PVC Cabinet Edgebanding). | You are Casework expert. You review specification and follow the instruction to pick correct Series option which represents cabinets materials and thickness: OPTIONS: {OPTIONS} INSTRUCTION: {INSTRUCTION} SPECIFICATION: {INPUT_TEXT} You think step by step. You markup the result option as following: RESULT: series | Note: - Treat Thermally Fused Melamine (TFM), Thermally Fused Laminate (TFL), and Color Matching Thermofused as the same. - If Thermally Fused Melamine is specified as a prefabricated particleboard, select TFL and don't look for other indicators. - Do not take into account the Concealed Cabinet Materials. Steps: 1. Start with Material Requirements: - Begin with the section detailing material requirements. 2. Core Material Selection: - Search for the specified core material. - If mentions that adhesives can't contain urea formaldehyde, pick NAUF; otherwise, select IPB CARB Compliant. - If not explicitly stated, default to Industrial Particleboard CARB Compliant. - Keywords for alternative materials: NAUF, No Added Urea Formaldehyde, MDF, Plywood, Hardwood, Plycore. - If adhesives with urea formaldehyde are prohibited, select No Added Urea Formaldehyde Particleboard (NAUF PB Core). - Eliminate any options that do not match the selected core material. 3. Fronts Material Selection: - Identify materials specified for finished fronts (exposed surfaces). - If fronts are not specified, default to HPL unless TFL or A-Tech Surface is mentioned. - If Thermally Fused Melamine is specified as a prefabricated particleboard, select TFL. - If color matching to interiors/exteriors is required, select TFL. - If both HPL and TFL can be used, choose TFL as the more cost-effective option. - Eliminate any options that do not match the selected fronts material. 4. Fronts Thickness Determination: - Identify the specified thickness for fronts. - If not specified, use the standard thickness for the selected material. - Eliminate any options that do not match the specified or standard thickness. 5. Ends Material Selection: - Search for specified materials for finished ends (exposed surfaces). - If ends are not specified, default to the same as fronts material. - If color matching to interiors/exteriors is required, select TFL. - If both HPL and TFL can be used, choose TFL as the more cost-effective option. - Eliminate any options that do not match the selected ends material. 6. Fronts Edging Selection: - Identify the specified edging for fronts (doors and drawer fronts). - If solid PVC edging or .020" thickness is mentioned, select Square Flat Edge. - If 3 mm thickness is specified for doors/drawer fronts, choose 3 mm Radius Edging Style. - If no edging is specified, default to Square Flat Edge. - Eliminate any options that do not match the selected edging style. 7. Cabinet Edgebanding Selection: - Search for the specified cabinet edgebanding. - If not specified, default to Flat (.020") PVC Cabinet Edgebanding. - Eliminate any options that do not match the selected cabinet edgebanding style. 8. Final Review: - Ensure all selections are compatible with each other. - Verify that all requirements from the original specification have been addressed. - If any conflicts or ambiguities remain, note them for further clarification. | { "options": [ { "series": "1100-C - Sq Flat Edge HPL Frts & HPL Ends IPB CARB Compliant Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1100-N - Sq Flat Edge HPL Frts & HPL Ends NAUF PB Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1150-C - Sq Flat Edge HPL Frts & TF Ends IPB CARB Compliant Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1150-N - Sq Flat Edge HPL Frts & TF Ends NAUF PB Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1200-C - 3mm HPL Frts & HPL Ends IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "ends": "High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1200-N - 3mm HPL Frts & HPL Ends NAUF PB Core", "fronts": "3mm High Pressure Laminate", "ends": "High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1250-C - 3mm HPL Frts & TF Ends IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1250-N - 3mm HPL Frts & TF Ends NAUF PB Core", "fronts": "3mm High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1600-C - Wood Veneer Frts 3mm Wood Edge & HPL Ends IPB CARB Compliant Core", "fronts": "Wood Veneer with 3mm Wood Edge", "ends": "High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": false }, { "series": "1600-N - Wood Veneer Frts 3mm Wood Edge & HPL Ends NAUF PB Core", "fronts": "Wood Veneer with 3mm Wood Edge", "ends": "High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": false }, { "series": "2100-C - Sq Flat Edge TF Frts & Ends IPB CARB Compliant Core", "fronts": "Square Flat Edge Thermally Fused Laminate", "ends": "Square Flat Edge Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "2100-N - Sq Flat Edge TF Frts & Ends NAUF PB Core", "fronts": "Square Flat Edge Thermally Fused Laminate", "ends": "Square Flat Edge Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "2200-C - 3mm TF Frts & Ends IPB CARB Compliant Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "2200-N - 3mm TF Frts & Ends NAUF PB Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "2600-C - Wood Veneer Frts 3mm Wood Edge & TF Color Throughout IPB CARB Compliant Core", "fronts": "Wood Veneer with 3mm Wood Edge", "throughout": "Thermally Fused Laminate Color", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": true }, { "series": "2600-N - Wood Veneer Frts 3mm Wood Edge & TF Color Throughout NAUF PB Core", "fronts": "Wood Veneer with 3mm Wood Edge", "throughout": "Thermally Fused Laminate Color", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": true }, { "series": "2700-C - Sq Flat Edge Frts & TF Color Throughout IPB CARB Compliant Core", "fronts": "Square Flat Edge", "throughout": "Thermally Fused Laminate Color", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": true }, { "series": "2700-N - Sq Flat Edge Frts & TF Color Throughout NAUF PB Core", "fronts": "Square Flat Edge", "throughout": "Thermally Fused Laminate Color", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": true }, { "series": "2800-C - 3mm Frts & TF Color Throughout IPB CARB Compliant Core", "fronts": "3mm", "throughout": "Thermally Fused Laminate Color", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": true }, { "series": "2800-N - 3mm Frts & TF Color Throughout NAUF PB Core", "fronts": "3mm", "throughout": "Thermally Fused Laminate Color", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": true }, { "series": "3100 - Sq Flat Edge HPL Frts & Ends Plywood Core Cabinet Box", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "Square Flat Edge High Pressure Laminate", "core": "Plywood Cabinet Box" }, { "series": "3200 - 3mm HPL Frts & Ends Plywood Core Cabinet Box", "fronts": "3mm High Pressure Laminate", "ends": "3mm High Pressure Laminate", "core": "Plywood Cabinet Box" }, { "series": "3600 - Wood Veneer Frts 3mm Wood Edge & HPL Ends Plywood Core Cabinet Box", "fronts": "Wood Veneer with 3mm Wood Edge", "ends": "High Pressure Laminate", "core": "Plywood Cabinet Box" }, { "series": "4200-C - 3mm Frts & A-Tech Surface Throughout IPB CARB Compliant Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "Industrial Particleboard CARB Compliant" }, { "series": "4200-N - 3mm Frts & A-Tech Surface Throughout NAUF PB Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "4400-C - 3mm Frts & A-Tech Surface Throughout IPB CARB Compliant Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "Industrial Particleboard CARB Compliant" }, { "series": "4400-N - 3mm Frts & A-Tech Surface Throughout NAUF PB Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "4700 - 3mm Wood Edge and Wood Veneer Frts & Ends", "fronts": "3mm Wood Edge and Wood Veneer", "ends": "3mm Wood Edge and Wood Veneer", "core": "Not Specified" }, { "series": "5120-C - 3mm HPL Frts & Ends IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "ends": "3mm High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "5120-N - 3mm HPL Frts & Ends NAUF PB Core", "fronts": "3mm High Pressure Laminate", "ends": "3mm High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "5220-C - 3mm TF Frts & Ends IPB CARB Compliant Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "5220-N - 3mm TF Frts & Ends NAUF PB Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "6120-C - 3mm HPL Frts & Exteriors IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "exteriors": "3mm High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "6120-N - 3mm HPL Frts & Exteriors NAUF PB Core", "fronts": "3mm High Pressure Laminate", "exteriors": "3mm High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "6220-C - 3mm TF Frts & Exteriors IPB CARB Compliant Core", "fronts": "3mm Thermally Fused Laminate", "exteriors": "3mm Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "6220-N - 3mm TF Frts & Exteriors NAUF PB Core", "fronts": "3mm Thermally Fused Laminate", "exteriors": "3mm Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard" } ] } | openai/gpt-4o-2024-05-13 | Prompt 1 | |||||||||||||||||
3 | 3 | 2800-C - 3mm Frts & TF Color Throughout IPB CARB Compliant Core | 2800-C | Let's go through the steps one by one to determine the correct series option. ### Step 1: Material Requirements - The specification mentions that the basis for the specification is Stevens Advantage 2800 Designer Series. ### Step 2: Core Material Selection - The core material should be Industrial Particleboard CARB Compliant (IPB CARB Compliant) as there is no mention of adhesives containing urea formaldehyde being prohibited. - Eliminate options with NAUF PB Core. ### Step 3: Fronts Material Selection - The specification states that door and drawer fronts must be matching high pressure laminate (HPL) on both sides. - Eliminate options that do not have HPL for fronts. ### Step 4: Fronts Thickness Determination - The specification states that door and drawer fronts shall be 3/4" thick. - Eliminate options that do not match the specified thickness. ### Step 5: Ends Material Selection - The ends can be either color matching thermofused or matching HPL. - Since the basis for the specification is Stevens Advantage 2800 Designer Series, which uses TFL for color matching, we will select TFL for ends. - Eliminate options that do not have TFL for ends. ### Step 6: Fronts Edging Selection - The specification states that edges shall have 3mm radius extrusion banding. - Eliminate options that do not have 3mm Radius Edge. ### Step 7: Cabinet Edgebanding Selection - The specification states that cabinet sides, top, bottom, adjustable shelves, and other interior components shall be edged with (.020") flat edge extrusion. - Eliminate options that do not have Flat (.020") PVC Cabinet Edgebanding. ### Step 8: Final Review - Ensure all selections are compatible with each other and verify that all requirements from the original specification have been addressed. ### Applying the Steps to the Options 1. **Core Material Selection:** - Eliminate options with NAUF PB Core. - Remaining options: 2800-C, 1250-C, 2200-C, 5220-C, 6120-C, 6220-C, 4200-C, 4400-C, 5120-C, 1600-C, 2600-C, 2700-C, 3100, 3200, 3600. 2. **Fronts Material Selection:** - Eliminate options that do not have HPL for fronts. - Remaining options: 2800-C, 1250-C, 2200-C, 5220-C, 6120-C, 6220-C, 4200-C, 4400-C, 5120-C, 1600-C, 2600-C, 2700-C, 3100, 3200, 3600. 3. **Fronts Thickness Determination:** - Eliminate options that do not match the specified thickness (3/4"). - Remaining options: 2800-C, 1250-C, 2200-C, 5220-C, 6120-C, 6220-C, 4200-C, 4400-C, 5120-C, 1600-C, 2600-C, 2700-C, 3100, 3200, 3600. 4. **Ends Material Selection:** - Eliminate options that do not have TFL for ends. - Remaining options: 2800-C, 1250-C, 2200-C, 5220-C, 6120-C, 6220-C, 4200-C, 4400-C, 5120-C, 1600-C, 2600-C, 2700-C, 3100, 3200, 3600. 5. **Fronts Edging Selection:** - Eliminate options that do not have 3mm Radius Edge. - Remaining options: 2800-C, 1250-C, 2200-C, 5220-C, 6120-C, 6220-C, 4200-C, 4400-C, 5120-C, 1600-C, 2600-C, 2700-C, 3100, 3200, 3600. 6. **Cabinet Edgebanding Selection:** - Eliminate options that do not have Flat (.020") PVC Cabinet Edgebanding. - Remaining options: 2800-C, 1250-C, 2200-C, 5220-C, 6120-C, 6220-C, 4200-C, 4400-C, 5120-C, 1600-C, 2600-C, 2700-C, 3100, 3200, 3600. ### Final Review - The remaining options are: - 2800-C - 3mm Frts & TF Color Throughout IPB CARB Compliant Core ### Result RESULT: 2800-C | You are Casework expert. You review specification and follow the instruction to pick correct Series option which represents cabinets materials and thickness: OPTIONS: {OPTIONS} INSTRUCTION: {INSTRUCTION} SPECIFICATION: {INPUT_TEXT} You think step by step. You markup the result option as following: RESULT: series | Note: - Treat Thermally Fused Melamine (TFM), Thermally Fused Laminate (TFL), and Color Matching Thermofused as the same. - If Thermally Fused Melamine is specified as a prefabricated particleboard, select TFL and don't look for other indicators. - Do not take into account the Concealed Cabinet Materials. Steps: 1. Start with Material Requirements: - Begin with the section detailing material requirements. 2. Core Material Selection: - Search for the specified core material. - If mentions that adhesives can't contain urea formaldehyde, pick NAUF; otherwise, select IPB CARB Compliant. - If not explicitly stated, default to Industrial Particleboard CARB Compliant. - Keywords for alternative materials: NAUF, No Added Urea Formaldehyde, MDF, Plywood, Hardwood, Plycore. - If adhesives with urea formaldehyde are prohibited, select No Added Urea Formaldehyde Particleboard (NAUF PB Core). - Eliminate any options that do not match the selected core material. 3. Fronts Material Selection: - Identify materials specified for finished fronts (exposed surfaces). - If fronts are not specified, default to HPL unless TFL or A-Tech Surface is mentioned. - If Thermally Fused Melamine is specified as a prefabricated particleboard, select TFL. - If color matching to interiors/exteriors is required, select TFL. - If both HPL and TFL can be used, choose TFL as the more cost-effective option. - Eliminate any options that do not match the selected fronts material. 4. Fronts Thickness Determination: - Identify the specified thickness for fronts. - If not specified, use the standard thickness for the selected material. - Eliminate any options that do not match the specified or standard thickness. 5. Ends Material Selection: - Search for specified materials for finished ends (exposed surfaces). - If ends are not specified, default to the same as fronts material. - If color matching to interiors/exteriors is required, select TFL. - If both HPL and TFL can be used, choose TFL as the more cost-effective option. - Eliminate any options that do not match the selected ends material. 6. Fronts Edging Selection: - Identify the specified edging for fronts (doors and drawer fronts). - If solid PVC edging or .020" thickness is mentioned, select Square Flat Edge. - If 3 mm thickness is specified for doors/drawer fronts, choose 3 mm Radius Edging Style. - If no edging is specified, default to Square Flat Edge. - Eliminate any options that do not match the selected edging style. 7. Cabinet Edgebanding Selection: - Search for the specified cabinet edgebanding. - If not specified, default to Flat (.020") PVC Cabinet Edgebanding. - Eliminate any options that do not match the selected cabinet edgebanding style. 8. Final Review: - Ensure all selections are compatible with each other. - Verify that all requirements from the original specification have been addressed. - If any conflicts or ambiguities remain, note them for further clarification. | { "options": [ { "series": "1100-C - Sq Flat Edge HPL Frts & HPL Ends IPB CARB Compliant Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1100-N - Sq Flat Edge HPL Frts & HPL Ends NAUF PB Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1150-C - Sq Flat Edge HPL Frts & TF Ends IPB CARB Compliant Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1150-N - Sq Flat Edge HPL Frts & TF Ends NAUF PB Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1200-C - 3mm HPL Frts & HPL Ends IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "ends": "High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1200-N - 3mm HPL Frts & HPL Ends NAUF PB Core", "fronts": "3mm High Pressure Laminate", "ends": "High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1250-C - 3mm HPL Frts & TF Ends IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1250-N - 3mm HPL Frts & TF Ends NAUF PB Core", "fronts": "3mm High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1600-C - Wood Veneer Frts 3mm Wood Edge & HPL Ends IPB CARB Compliant Core", "fronts": "Wood Veneer with 3mm Wood Edge", "ends": "High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": false }, { "series": "1600-N - Wood Veneer Frts 3mm Wood Edge & HPL Ends NAUF PB Core", "fronts": "Wood Veneer with 3mm Wood Edge", "ends": "High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": false }, { "series": "2100-C - Sq Flat Edge TF Frts & Ends IPB CARB Compliant Core", "fronts": "Square Flat Edge Thermally Fused Laminate", "ends": "Square Flat Edge Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "2100-N - Sq Flat Edge TF Frts & Ends NAUF PB Core", "fronts": "Square Flat Edge Thermally Fused Laminate", "ends": "Square Flat Edge Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "2200-C - 3mm TF Frts & Ends IPB CARB Compliant Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "2200-N - 3mm TF Frts & Ends NAUF PB Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "2600-C - Wood Veneer Frts 3mm Wood Edge & TF Color Throughout IPB CARB Compliant Core", "fronts": "Wood Veneer with 3mm Wood Edge", "throughout": "Thermally Fused Laminate Color", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": true }, { "series": "2600-N - Wood Veneer Frts 3mm Wood Edge & TF Color Throughout NAUF PB Core", "fronts": "Wood Veneer with 3mm Wood Edge", "throughout": "Thermally Fused Laminate Color", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": true }, { "series": "2700-C - Sq Flat Edge Frts & TF Color Throughout IPB CARB Compliant Core", "fronts": "Square Flat Edge", "throughout": "Thermally Fused Laminate Color", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": true }, { "series": "2700-N - Sq Flat Edge Frts & TF Color Throughout NAUF PB Core", "fronts": "Square Flat Edge", "throughout": "Thermally Fused Laminate Color", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": true }, { "series": "2800-C - 3mm Frts & TF Color Throughout IPB CARB Compliant Core", "fronts": "3mm", "throughout": "Thermally Fused Laminate Color", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": true }, { "series": "2800-N - 3mm Frts & TF Color Throughout NAUF PB Core", "fronts": "3mm", "throughout": "Thermally Fused Laminate Color", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": true }, { "series": "3100 - Sq Flat Edge HPL Frts & Ends Plywood Core Cabinet Box", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "Square Flat Edge High Pressure Laminate", "core": "Plywood Cabinet Box" }, { "series": "3200 - 3mm HPL Frts & Ends Plywood Core Cabinet Box", "fronts": "3mm High Pressure Laminate", "ends": "3mm High Pressure Laminate", "core": "Plywood Cabinet Box" }, { "series": "3600 - Wood Veneer Frts 3mm Wood Edge & HPL Ends Plywood Core Cabinet Box", "fronts": "Wood Veneer with 3mm Wood Edge", "ends": "High Pressure Laminate", "core": "Plywood Cabinet Box" }, { "series": "4200-C - 3mm Frts & A-Tech Surface Throughout IPB CARB Compliant Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "Industrial Particleboard CARB Compliant" }, { "series": "4200-N - 3mm Frts & A-Tech Surface Throughout NAUF PB Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "4400-C - 3mm Frts & A-Tech Surface Throughout IPB CARB Compliant Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "Industrial Particleboard CARB Compliant" }, { "series": "4400-N - 3mm Frts & A-Tech Surface Throughout NAUF PB Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "4700 - 3mm Wood Edge and Wood Veneer Frts & Ends", "fronts": "3mm Wood Edge and Wood Veneer", "ends": "3mm Wood Edge and Wood Veneer", "core": "Not Specified" }, { "series": "5120-C - 3mm HPL Frts & Ends IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "ends": "3mm High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "5120-N - 3mm HPL Frts & Ends NAUF PB Core", "fronts": "3mm High Pressure Laminate", "ends": "3mm High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "5220-C - 3mm TF Frts & Ends IPB CARB Compliant Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "5220-N - 3mm TF Frts & Ends NAUF PB Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "6120-C - 3mm HPL Frts & Exteriors IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "exteriors": "3mm High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "6120-N - 3mm HPL Frts & Exteriors NAUF PB Core", "fronts": "3mm High Pressure Laminate", "exteriors": "3mm High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "6220-C - 3mm TF Frts & Exteriors IPB CARB Compliant Core", "fronts": "3mm Thermally Fused Laminate", "exteriors": "3mm Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "6220-N - 3mm TF Frts & Exteriors NAUF PB Core", "fronts": "3mm Thermally Fused Laminate", "exteriors": "3mm Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard" } ] } | openai/gpt-4o-2024-05-13 | Prompt 1 | |||||||||||||||||
4 | 6 | 1200-N - 3mm HPL Frts & HPL Ends NAUF PB Core | ** 1100-N - Sq Flat Edge HPL Frts & HPL Ends NAUF PB Core** | Based on the provided specification and following the detailed steps, let's determine the correct series option for the cabinets: ### Step-by-Step Analysis: #### 1. Material Requirements: - **Core Material**: The specification mentions that adhesives should not contain urea formaldehyde. Therefore, we should select "No Added Urea Formaldehyde Particleboard (NAUF PB Core)". - **Fronts Material**: The specification requires high-pressure laminate (HPL) for exposed surfaces. - **Fronts Thickness**: The specification does not explicitly mention the thickness, so we will use the standard thickness for HPL. - **Ends Material**: The ends should match the fronts, which is HPL. - **Fronts Edging**: The specification mentions that PVC edging will not be acceptable, so we should look for options without PVC edging. - **Cabinet Edgebanding**: The specification does not explicitly mention the cabinet edgebanding, so we will default to the standard. #### 2. Core Material Selection: - **Selected Core Material**: No Added Urea Formaldehyde Particleboard (NAUF PB Core). #### 3. Fronts Material Selection: - **Selected Fronts Material**: High Pressure Laminate (HPL). #### 4. Fronts Thickness Determination: - **Selected Fronts Thickness**: Standard thickness for HPL. #### 5. Ends Material Selection: - **Selected Ends Material**: High Pressure Laminate (HPL). #### 6. Fronts Edging Selection: - **Selected Fronts Edging**: Since PVC edging is not acceptable, we should look for options without PVC edging. However, the provided options all have PVC edgebanding, so we will select the one that best matches the other criteria. #### 7. Cabinet Edgebanding Selection: - **Selected Cabinet Edgebanding**: Default to Flat (.020") PVC Cabinet Edgebanding. ### Final Review: - **Core Material**: No Added Urea Formaldehyde Particleboard (NAUF PB Core). - **Fronts Material**: High Pressure Laminate (HPL). - **Fronts Thickness**: Standard thickness for HPL. - **Ends Material**: High Pressure Laminate (HPL). - **Fronts Edging**: Square Flat Edge (since PVC is not acceptable, but all options have PVC, we will select the best match). - **Cabinet Edgebanding**: Flat (.020") PVC Cabinet Edgebanding. ### Matching the Options: Based on the above criteria, the best matching series option is: **RESULT: 1100-N - Sq Flat Edge HPL Frts & HPL Ends NAUF PB Core** This option matches the core material (NAUF PB Core), fronts material (HPL), ends material (HPL), and the standard edgebanding style. | You are Casework expert. You review specification and follow the instruction to pick correct Series option which represents cabinets materials and thickness: OPTIONS: {OPTIONS} INSTRUCTION: {INSTRUCTION} SPECIFICATION: {INPUT_TEXT} You think step by step. You markup the result option as following: RESULT: series | Note: - Treat Thermally Fused Melamine (TFM), Thermally Fused Laminate (TFL), and Color Matching Thermofused as the same. - If Thermally Fused Melamine is specified as a prefabricated particleboard, select TFL and don't look for other indicators. - Do not take into account the Concealed Cabinet Materials. Steps: 1. Start with Material Requirements: - Begin with the section detailing material requirements. 2. Core Material Selection: - Search for the specified core material. - If mentions that adhesives can't contain urea formaldehyde, pick NAUF; otherwise, select IPB CARB Compliant. - If not explicitly stated, default to Industrial Particleboard CARB Compliant. - Keywords for alternative materials: NAUF, No Added Urea Formaldehyde, MDF, Plywood, Hardwood, Plycore. - If adhesives with urea formaldehyde are prohibited, select No Added Urea Formaldehyde Particleboard (NAUF PB Core). - Eliminate any options that do not match the selected core material. 3. Fronts Material Selection: - Identify materials specified for finished fronts (exposed surfaces). - If fronts are not specified, default to HPL unless TFL or A-Tech Surface is mentioned. - If Thermally Fused Melamine is specified as a prefabricated particleboard, select TFL. - If color matching to interiors/exteriors is required, select TFL. - If both HPL and TFL can be used, choose TFL as the more cost-effective option. - Eliminate any options that do not match the selected fronts material. 4. Fronts Thickness Determination: - Identify the specified thickness for fronts. - If not specified, use the standard thickness for the selected material. - Eliminate any options that do not match the specified or standard thickness. 5. Ends Material Selection: - Search for specified materials for finished ends (exposed surfaces). - If ends are not specified, default to the same as fronts material. - If color matching to interiors/exteriors is required, select TFL. - If both HPL and TFL can be used, choose TFL as the more cost-effective option. - Eliminate any options that do not match the selected ends material. 6. Fronts Edging Selection: - Identify the specified edging for fronts (doors and drawer fronts). - If solid PVC edging or .020" thickness is mentioned, select Square Flat Edge. - If 3 mm thickness is specified for doors/drawer fronts, choose 3 mm Radius Edging Style. - If no edging is specified, default to Square Flat Edge. - Eliminate any options that do not match the selected edging style. 7. Cabinet Edgebanding Selection: - Search for the specified cabinet edgebanding. - If not specified, default to Flat (.020") PVC Cabinet Edgebanding. - Eliminate any options that do not match the selected cabinet edgebanding style. 8. Final Review: - Ensure all selections are compatible with each other. - Verify that all requirements from the original specification have been addressed. - If any conflicts or ambiguities remain, note them for further clarification. | { "options": [ { "series": "1100-C - Sq Flat Edge HPL Frts & HPL Ends IPB CARB Compliant Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1100-N - Sq Flat Edge HPL Frts & HPL Ends NAUF PB Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1150-C - Sq Flat Edge HPL Frts & TF Ends IPB CARB Compliant Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1150-N - Sq Flat Edge HPL Frts & TF Ends NAUF PB Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1200-C - 3mm HPL Frts & HPL Ends IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "ends": "High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1200-N - 3mm HPL Frts & HPL Ends NAUF PB Core", "fronts": "3mm High Pressure Laminate", "ends": "High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1250-C - 3mm HPL Frts & TF Ends IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1250-N - 3mm HPL Frts & TF Ends NAUF PB Core", "fronts": "3mm High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1600-C - Wood Veneer Frts 3mm Wood Edge & HPL Ends IPB CARB Compliant Core", "fronts": "Wood Veneer with 3mm Wood Edge", "ends": "High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": false }, { "series": "1600-N - Wood Veneer Frts 3mm Wood Edge & HPL Ends NAUF PB Core", "fronts": "Wood Veneer with 3mm Wood Edge", "ends": "High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": false }, { "series": "2100-C - Sq Flat Edge TF Frts & Ends IPB CARB Compliant Core", "fronts": "Square Flat Edge Thermally Fused Laminate", "ends": "Square Flat Edge Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "2100-N - Sq Flat Edge TF Frts & Ends NAUF PB Core", "fronts": "Square Flat Edge Thermally Fused Laminate", "ends": "Square Flat Edge Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "2200-C - 3mm TF Frts & Ends IPB CARB Compliant Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "2200-N - 3mm TF Frts & Ends NAUF PB Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "2600-C - Wood Veneer Frts 3mm Wood Edge & TF Color Throughout IPB CARB Compliant Core", "fronts": "Wood Veneer with 3mm Wood Edge", "throughout": "Thermally Fused Laminate Color", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": true }, { "series": "2600-N - Wood Veneer Frts 3mm Wood Edge & TF Color Throughout NAUF PB Core", "fronts": "Wood Veneer with 3mm Wood Edge", "throughout": "Thermally Fused Laminate Color", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": true }, { "series": "2700-C - Sq Flat Edge Frts & TF Color Throughout IPB CARB Compliant Core", "fronts": "Square Flat Edge", "throughout": "Thermally Fused Laminate Color", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": true }, { "series": "2700-N - Sq Flat Edge Frts & TF Color Throughout NAUF PB Core", "fronts": "Square Flat Edge", "throughout": "Thermally Fused Laminate Color", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": true }, { "series": "2800-C - 3mm Frts & TF Color Throughout IPB CARB Compliant Core", "fronts": "3mm", "throughout": "Thermally Fused Laminate Color", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": true }, { "series": "2800-N - 3mm Frts & TF Color Throughout NAUF PB Core", "fronts": "3mm", "throughout": "Thermally Fused Laminate Color", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": true }, { "series": "3100 - Sq Flat Edge HPL Frts & Ends Plywood Core Cabinet Box", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "Square Flat Edge High Pressure Laminate", "core": "Plywood Cabinet Box" }, { "series": "3200 - 3mm HPL Frts & Ends Plywood Core Cabinet Box", "fronts": "3mm High Pressure Laminate", "ends": "3mm High Pressure Laminate", "core": "Plywood Cabinet Box" }, { "series": "3600 - Wood Veneer Frts 3mm Wood Edge & HPL Ends Plywood Core Cabinet Box", "fronts": "Wood Veneer with 3mm Wood Edge", "ends": "High Pressure Laminate", "core": "Plywood Cabinet Box" }, { "series": "4200-C - 3mm Frts & A-Tech Surface Throughout IPB CARB Compliant Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "Industrial Particleboard CARB Compliant" }, { "series": "4200-N - 3mm Frts & A-Tech Surface Throughout NAUF PB Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "4400-C - 3mm Frts & A-Tech Surface Throughout IPB CARB Compliant Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "Industrial Particleboard CARB Compliant" }, { "series": "4400-N - 3mm Frts & A-Tech Surface Throughout NAUF PB Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "4700 - 3mm Wood Edge and Wood Veneer Frts & Ends", "fronts": "3mm Wood Edge and Wood Veneer", "ends": "3mm Wood Edge and Wood Veneer", "core": "Not Specified" }, { "series": "5120-C - 3mm HPL Frts & Ends IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "ends": "3mm High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "5120-N - 3mm HPL Frts & Ends NAUF PB Core", "fronts": "3mm High Pressure Laminate", "ends": "3mm High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "5220-C - 3mm TF Frts & Ends IPB CARB Compliant Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "5220-N - 3mm TF Frts & Ends NAUF PB Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "6120-C - 3mm HPL Frts & Exteriors IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "exteriors": "3mm High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "6120-N - 3mm HPL Frts & Exteriors NAUF PB Core", "fronts": "3mm High Pressure Laminate", "exteriors": "3mm High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "6220-C - 3mm TF Frts & Exteriors IPB CARB Compliant Core", "fronts": "3mm Thermally Fused Laminate", "exteriors": "3mm Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "6220-N - 3mm TF Frts & Exteriors NAUF PB Core", "fronts": "3mm Thermally Fused Laminate", "exteriors": "3mm Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard" } ] } | openai/gpt-4o-2024-05-13 | Prompt 1 | |||||||||||||||||
5 | 9 | 2100-C - Sq Flat Edge TF Frts & Ends IPB CARB Compliant Core | 2100-C | Let's go through the steps one by one to determine the correct series option based on the provided specification. ### Step 1: Material Requirements The specification mentions the following materials: - **Core Material**: High-density, high-performance particleboard core with Thermally Fused Melamine (TFL). - **Fronts Material**: Plastic laminate. - **Ends Material**: Thermally Fused Melamine (TFL). - **Fronts Thickness**: 3/4 inch thick. - **Edging**: Flat edge PVC, color matched to door and drawer fronts. ### Step 2: Core Material Selection - The core material specified is high-density, high-performance particleboard. - The specification does not explicitly prohibit urea formaldehyde adhesives. - Therefore, we default to **Industrial Particleboard CARB Compliant**. ### Step 3: Fronts Material Selection - The specification mentions that exposed cabinet door and drawer fronts shall receive plastic laminate. - However, since Thermally Fused Melamine (TFL) is specified for the core and ends, and TFL is more cost-effective, we will select **TFL** for the fronts. ### Step 4: Fronts Thickness Determination - The specified thickness for fronts is 3/4 inch. - We will select options that match this thickness. ### Step 5: Ends Material Selection - The ends material specified is Thermally Fused Melamine (TFL). - We will select **TFL** for the ends. ### Step 6: Fronts Edging Selection - The specified edging for fronts is flat edge PVC, color matched to door and drawer fronts. - We will select **Square Flat Edge**. ### Step 7: Cabinet Edgebanding Selection - The specification does not mention specific cabinet edgebanding. - We will default to **Flat (.020") PVC Cabinet Edgebanding**. ### Step 8: Final Review - Ensure all selections are compatible with each other. - Verify that all requirements from the original specification have been addressed. ### Elimination Process Based on the above steps, we need to find a series that matches the following criteria: 1. **Core Material**: Industrial Particleboard CARB Compliant. 2. **Fronts Material**: Thermally Fused Laminate (TFL). 3. **Ends Material**: Thermally Fused Laminate (TFL). 4. **Fronts Thickness**: 3/4 inch. 5. **Fronts Edging**: Square Flat Edge. 6. **Cabinet Edgebanding**: Flat (.020") PVC Cabinet Edgebanding. ### Matching Series Options From the provided options, the series that match these criteria are: - **2100-C - Sq Flat Edge TF Frts & Ends IPB CARB Compliant Core** ### Markup the Result RESULT: 2100-C | You are Casework expert. You review specification and follow the instruction to pick correct Series option which represents cabinets materials and thickness: OPTIONS: {OPTIONS} INSTRUCTION: {INSTRUCTION} SPECIFICATION: {INPUT_TEXT} You think step by step. You markup the result option as following: RESULT: series | Note: - Treat Thermally Fused Melamine (TFM), Thermally Fused Laminate (TFL), and Color Matching Thermofused as the same. - If Thermally Fused Melamine is specified as a prefabricated particleboard, select TFL and don't look for other indicators. - Do not take into account the Concealed Cabinet Materials. Steps: 1. Start with Material Requirements: - Begin with the section detailing material requirements. 2. Core Material Selection: - Search for the specified core material. - If mentions that adhesives can't contain urea formaldehyde, pick NAUF; otherwise, select IPB CARB Compliant. - If not explicitly stated, default to Industrial Particleboard CARB Compliant. - Keywords for alternative materials: NAUF, No Added Urea Formaldehyde, MDF, Plywood, Hardwood, Plycore. - If adhesives with urea formaldehyde are prohibited, select No Added Urea Formaldehyde Particleboard (NAUF PB Core). - Eliminate any options that do not match the selected core material. 3. Fronts Material Selection: - Identify materials specified for finished fronts (exposed surfaces). - If fronts are not specified, default to HPL unless TFL or A-Tech Surface is mentioned. - If Thermally Fused Melamine is specified as a prefabricated particleboard, select TFL. - If color matching to interiors/exteriors is required, select TFL. - If both HPL and TFL can be used, choose TFL as the more cost-effective option. - Eliminate any options that do not match the selected fronts material. 4. Fronts Thickness Determination: - Identify the specified thickness for fronts. - If not specified, use the standard thickness for the selected material. - Eliminate any options that do not match the specified or standard thickness. 5. Ends Material Selection: - Search for specified materials for finished ends (exposed surfaces). - If ends are not specified, default to the same as fronts material. - If color matching to interiors/exteriors is required, select TFL. - If both HPL and TFL can be used, choose TFL as the more cost-effective option. - Eliminate any options that do not match the selected ends material. 6. Fronts Edging Selection: - Identify the specified edging for fronts (doors and drawer fronts). - If solid PVC edging or .020" thickness is mentioned, select Square Flat Edge. - If 3 mm thickness is specified for doors/drawer fronts, choose 3 mm Radius Edging Style. - If no edging is specified, default to Square Flat Edge. - Eliminate any options that do not match the selected edging style. 7. Cabinet Edgebanding Selection: - Search for the specified cabinet edgebanding. - If not specified, default to Flat (.020") PVC Cabinet Edgebanding. - Eliminate any options that do not match the selected cabinet edgebanding style. 8. Final Review: - Ensure all selections are compatible with each other. - Verify that all requirements from the original specification have been addressed. - If any conflicts or ambiguities remain, note them for further clarification. | { "options": [ { "series": "1100-C - Sq Flat Edge HPL Frts & HPL Ends IPB CARB Compliant Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1100-N - Sq Flat Edge HPL Frts & HPL Ends NAUF PB Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1150-C - Sq Flat Edge HPL Frts & TF Ends IPB CARB Compliant Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1150-N - Sq Flat Edge HPL Frts & TF Ends NAUF PB Core", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "1200-C - 3mm HPL Frts & HPL Ends IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "ends": "High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1200-N - 3mm HPL Frts & HPL Ends NAUF PB Core", "fronts": "3mm High Pressure Laminate", "ends": "High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1250-C - 3mm HPL Frts & TF Ends IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1250-N - 3mm HPL Frts & TF Ends NAUF PB Core", "fronts": "3mm High Pressure Laminate", "ends": "Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "1600-C - Wood Veneer Frts 3mm Wood Edge & HPL Ends IPB CARB Compliant Core", "fronts": "Wood Veneer with 3mm Wood Edge", "ends": "High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": false }, { "series": "1600-N - Wood Veneer Frts 3mm Wood Edge & HPL Ends NAUF PB Core", "fronts": "Wood Veneer with 3mm Wood Edge", "ends": "High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": false }, { "series": "2100-C - Sq Flat Edge TF Frts & Ends IPB CARB Compliant Core", "fronts": "Square Flat Edge Thermally Fused Laminate", "ends": "Square Flat Edge Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "2100-N - Sq Flat Edge TF Frts & Ends NAUF PB Core", "fronts": "Square Flat Edge Thermally Fused Laminate", "ends": "Square Flat Edge Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": false }, { "series": "2200-C - 3mm TF Frts & Ends IPB CARB Compliant Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "2200-N - 3mm TF Frts & Ends NAUF PB Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": false }, { "series": "2600-C - Wood Veneer Frts 3mm Wood Edge & TF Color Throughout IPB CARB Compliant Core", "fronts": "Wood Veneer with 3mm Wood Edge", "throughout": "Thermally Fused Laminate Color", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": true }, { "series": "2600-N - Wood Veneer Frts 3mm Wood Edge & TF Color Throughout NAUF PB Core", "fronts": "Wood Veneer with 3mm Wood Edge", "throughout": "Thermally Fused Laminate Color", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Wood Edge", "color_matched": true }, { "series": "2700-C - Sq Flat Edge Frts & TF Color Throughout IPB CARB Compliant Core", "fronts": "Square Flat Edge", "throughout": "Thermally Fused Laminate Color", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": true }, { "series": "2700-N - Sq Flat Edge Frts & TF Color Throughout NAUF PB Core", "fronts": "Square Flat Edge", "throughout": "Thermally Fused Laminate Color", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "Square Flat Edge", "color_matched": true }, { "series": "2800-C - 3mm Frts & TF Color Throughout IPB CARB Compliant Core", "fronts": "3mm", "throughout": "Thermally Fused Laminate Color", "core": "Industrial Particleboard CARB Compliant", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": true }, { "series": "2800-N - 3mm Frts & TF Color Throughout NAUF PB Core", "fronts": "3mm", "throughout": "Thermally Fused Laminate Color", "core": "No Added Urea Formaldehyde Particleboard", "edgebanding": "Flat (.020\") PVC Cabinet Edgebanding", "edge_style": "3mm Radius Edge", "color_matched": true }, { "series": "3100 - Sq Flat Edge HPL Frts & Ends Plywood Core Cabinet Box", "fronts": "Square Flat Edge High Pressure Laminate", "ends": "Square Flat Edge High Pressure Laminate", "core": "Plywood Cabinet Box" }, { "series": "3200 - 3mm HPL Frts & Ends Plywood Core Cabinet Box", "fronts": "3mm High Pressure Laminate", "ends": "3mm High Pressure Laminate", "core": "Plywood Cabinet Box" }, { "series": "3600 - Wood Veneer Frts 3mm Wood Edge & HPL Ends Plywood Core Cabinet Box", "fronts": "Wood Veneer with 3mm Wood Edge", "ends": "High Pressure Laminate", "core": "Plywood Cabinet Box" }, { "series": "4200-C - 3mm Frts & A-Tech Surface Throughout IPB CARB Compliant Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "Industrial Particleboard CARB Compliant" }, { "series": "4200-N - 3mm Frts & A-Tech Surface Throughout NAUF PB Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "4400-C - 3mm Frts & A-Tech Surface Throughout IPB CARB Compliant Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "Industrial Particleboard CARB Compliant" }, { "series": "4400-N - 3mm Frts & A-Tech Surface Throughout NAUF PB Core", "fronts": "3mm", "throughout": "A-Tech Surface", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "4700 - 3mm Wood Edge and Wood Veneer Frts & Ends", "fronts": "3mm Wood Edge and Wood Veneer", "ends": "3mm Wood Edge and Wood Veneer", "core": "Not Specified" }, { "series": "5120-C - 3mm HPL Frts & Ends IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "ends": "3mm High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "5120-N - 3mm HPL Frts & Ends NAUF PB Core", "fronts": "3mm High Pressure Laminate", "ends": "3mm High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "5220-C - 3mm TF Frts & Ends IPB CARB Compliant Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "5220-N - 3mm TF Frts & Ends NAUF PB Core", "fronts": "3mm Thermally Fused Laminate", "ends": "3mm Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "6120-C - 3mm HPL Frts & Exteriors IPB CARB Compliant Core", "fronts": "3mm High Pressure Laminate", "exteriors": "3mm High Pressure Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "6120-N - 3mm HPL Frts & Exteriors NAUF PB Core", "fronts": "3mm High Pressure Laminate", "exteriors": "3mm High Pressure Laminate", "core": "No Added Urea Formaldehyde Particleboard" }, { "series": "6220-C - 3mm TF Frts & Exteriors IPB CARB Compliant Core", "fronts": "3mm Thermally Fused Laminate", "exteriors": "3mm Thermally Fused Laminate", "core": "Industrial Particleboard CARB Compliant" }, { "series": "6220-N - 3mm TF Frts & Exteriors NAUF PB Core", "fronts": "3mm Thermally Fused Laminate", "exteriors": "3mm Thermally Fused Laminate", "core": "No Added Urea Formaldehyde Particleboard" } ] } | openai/gpt-4o-2024-05-13 | Prompt 1 | |||||||||||||||||
6 | ||||||||||||||||||||||||||
7 | ||||||||||||||||||||||||||
8 | ||||||||||||||||||||||||||
9 | ||||||||||||||||||||||||||
10 | ||||||||||||||||||||||||||
11 | ||||||||||||||||||||||||||
12 | ||||||||||||||||||||||||||
13 | ||||||||||||||||||||||||||
14 | ||||||||||||||||||||||||||
15 | ||||||||||||||||||||||||||
16 | ||||||||||||||||||||||||||
17 | ||||||||||||||||||||||||||
18 | ||||||||||||||||||||||||||
19 | ||||||||||||||||||||||||||
20 | ||||||||||||||||||||||||||
21 | ||||||||||||||||||||||||||
22 | ||||||||||||||||||||||||||
23 | ||||||||||||||||||||||||||
24 | ||||||||||||||||||||||||||
25 | ||||||||||||||||||||||||||
26 | ||||||||||||||||||||||||||
27 | ||||||||||||||||||||||||||
28 | ||||||||||||||||||||||||||
29 | ||||||||||||||||||||||||||
30 | ||||||||||||||||||||||||||
31 | ||||||||||||||||||||||||||
32 | ||||||||||||||||||||||||||
33 | ||||||||||||||||||||||||||
34 | ||||||||||||||||||||||||||
35 | ||||||||||||||||||||||||||
36 | ||||||||||||||||||||||||||
37 | ||||||||||||||||||||||||||
38 | ||||||||||||||||||||||||||
39 | ||||||||||||||||||||||||||
40 | ||||||||||||||||||||||||||
41 | ||||||||||||||||||||||||||
42 | ||||||||||||||||||||||||||
43 | ||||||||||||||||||||||||||
44 | ||||||||||||||||||||||||||
45 | ||||||||||||||||||||||||||
46 | ||||||||||||||||||||||||||
47 | ||||||||||||||||||||||||||
48 | ||||||||||||||||||||||||||
49 | ||||||||||||||||||||||||||
50 | ||||||||||||||||||||||||||
51 | ||||||||||||||||||||||||||
52 | ||||||||||||||||||||||||||
53 | ||||||||||||||||||||||||||
54 | ||||||||||||||||||||||||||
55 | ||||||||||||||||||||||||||
56 | ||||||||||||||||||||||||||
57 | ||||||||||||||||||||||||||
58 | ||||||||||||||||||||||||||
59 | ||||||||||||||||||||||||||
60 | ||||||||||||||||||||||||||
61 | ||||||||||||||||||||||||||
62 | ||||||||||||||||||||||||||
63 | ||||||||||||||||||||||||||
64 | ||||||||||||||||||||||||||
65 | ||||||||||||||||||||||||||
66 | ||||||||||||||||||||||||||
67 | ||||||||||||||||||||||||||
68 | ||||||||||||||||||||||||||
69 | ||||||||||||||||||||||||||
70 | ||||||||||||||||||||||||||
71 | ||||||||||||||||||||||||||
72 | ||||||||||||||||||||||||||
73 | ||||||||||||||||||||||||||
74 | ||||||||||||||||||||||||||
75 | ||||||||||||||||||||||||||
76 | ||||||||||||||||||||||||||
77 | ||||||||||||||||||||||||||
78 | ||||||||||||||||||||||||||
79 | ||||||||||||||||||||||||||
80 | ||||||||||||||||||||||||||
81 | ||||||||||||||||||||||||||
82 | ||||||||||||||||||||||||||
83 | ||||||||||||||||||||||||||
84 | ||||||||||||||||||||||||||
85 | ||||||||||||||||||||||||||
86 | ||||||||||||||||||||||||||
87 | ||||||||||||||||||||||||||
88 | ||||||||||||||||||||||||||
89 | ||||||||||||||||||||||||||
90 | ||||||||||||||||||||||||||
91 | ||||||||||||||||||||||||||
92 | ||||||||||||||||||||||||||
93 | ||||||||||||||||||||||||||
94 | ||||||||||||||||||||||||||
95 | ||||||||||||||||||||||||||
96 | ||||||||||||||||||||||||||
97 | ||||||||||||||||||||||||||
98 | ||||||||||||||||||||||||||
99 | ||||||||||||||||||||||||||
100 |