ABCDEFGHIJKLMNOPQRSTUVWXYZ
1
MakeModelIssueDescriptionStatus
suggested dev
2
3
Alinco
4
DR-06T1539Tuning step 100.00 not supportednew
5
DR-06T5473Cross tone options not supported (unclear whether the radio itself does?)new
6
DR-135T3949Probably OS related USB to serial driver problemnew
7
DR-135 Mk-III4353Extend frequency rangenew
8
DR-235T MKIII929not programming NFMnew
9
DR-2353021names with underscores choppednew
10
DR-2358093Unexpected response from radiostalled
11
12
Anytone
13
Anytone driver7699Patch for tuning steps (not submitted yet)stalled
14
DONEAT-778UV8327all of the DPL codes are show a value of "023". The CTCSS/PL tones are correct.closed
15
AT-5888UV655* and - removed from character setstalled
16
DONEAT-5888UV1491tone squelch programming problemclosed
17
AT-5888UV?1609When I copy, everything copies well, except it changes all the Power Levels go from High to Low. Used to work (2014?)new
18
DONEAT-5888UV2989It seems that the Squelch Mode on my Any Tone AT-5888UV is stored on a channel-by-channel basis in memory.closed
19
DONEAT-5888UV2997Application Crashes when adjusting viewable memory range / exporting Anytone UV5888.img fileclosed
Might no longer be an issue?
20
DONEAT-5888UV3653In Chirp, I enter TSQL and a tone, sent to radio...no work.closed
21
AT-5888UV6401Slow Read Errornew
22
DONEAT-5888UV6633
When setting Menu #16 (Squelch Mode Setup “SGN SQL”) to “CT/DCS” and then powering the radio off and on, or when changing channels, Menu #16 resets to “SQ”.
closed
23
AT-5888UV6851Cannot set GMRS frequency due to 12.5kHz step requirementnew
24
AT-5888UV7165Incorrect step size error. This used to work in older Chirp versions.new
25
AT-5888UV8413CHIRP Crashing Every Single Time Its Done Reading The Radionew
should be closed in Feb 2021
26
TERMN-8R2519When I program my TERMN-8R using the build: daily-20150411, some channels have a signaling mode set.
stalled (Jim)
27
RESOLVED
TERMN-8R7883Anytone HT TERMN8R can't insert channels that require 12.5kHz step. Solution suggested.
28
29
Baofeng
30
all?4165A patch to fix serial driver for Linux was submitted - has it been applied?
complete, but needs to be applied?
31
all?8369Incorrect firmware version displayed in Chirp (possibly when radio doesn't contain any firmware version info)new
32
CLOSEDBF-8882897Blank settings pagenew
should be closed soon
33
BF-8887609"Radio returned unknown identification string"new
34
RESOLVED
BF-8888197H-777 (as BF-888) failed to send to radio during upload (partial - stops at various locations) - downloads finenewclose soon?
35
BF-888S6097Negative offset in UHF is saved as positivenew
36
BF-888S6587not able to change any of the settings in the SETTINGS tabnew
37
BF-888S7067Reads COM4, Attempt write COM4 "Failed to send block to radio at 0000"stalled
Already check-ins for that, but apparently the issue isn't fully resolved
38
BF-888S7255
Upload while pressing MONI key accident - radio now left with a noise that is always as if it were to press the monitor key and with the respective LED on.
new
39
ABANDONED
BF-888S7833The radio can not enter programing modenew
should be closed soon
40
BF-888S8169Proposed patch to harden communication with radionew
needs review and implementation
41
BF-888S(+)4565BF-888S and BF-888S Plus Fail To Intialize 50% Of Timenew
42
BF-F8HP40731 worked with CHIRP at first, but now won't ("radio did not respond"). 2 works like a champ with no issues.new
43
CLOSEDBF-F8HP4777Locked Up After Chirp Installnew
should be closed in 1 month
44
BF-F8HP6863
I can add the 88.5 but when I go to the next line to program another repeater frequency (at 443.850000 with the same Tone frequency) the 88.5 disappears.
new
45
BF-F8HP8257It worked fine but today I started to notice I wasn't hearing everything. Most of the time its like the receiver is muted or something.new
46
BF-F8HP8381BaoFeng BF-F8HP Not Responding to Downloadnew
Should be closed soon
47
BF-F9V2+4579Issues with different firmware versionsnew
48
CLOSEDBF-UVF108337Cable problemnewclose soon
49
CLOSEDGT-3TP7009Baofeng GT-3TP: offset doesn't downloadnew
Might be a simple operational issue
50
UV-3R+4635Repeater offset is wrong by a factor of 1000. Fix source code attached, but not acceptablestalled
51
UV-5HP6061Can't use keypad after uploadnew
52
UV-3R+5447there is no way to add the second DTCS code when selecting split as the Duplex mode and DTCS --> DTCS as the cross modenew
53
UV-5R2003You can select the skip column and select skip (S) but the radio will still scan that channel.new
54
UV-5R3351(and other Baofengs) CHIRP does not program the following DTMF characters correctly: *, #, A, B, C, or D. new
55
UV-5R4335(MacOS) Chirp crash on upload to radio when using saved imgnew
56
UV-5R4447Upper/Lower case for UV-5R memoriesnew
57
CLOSEDUV-5R4611Clone problemstalled
should be closed soon
58
UV-5R5111When in VFO mode, offsets aren't handled correctly (rounding issue?)new
59
NO FEEDBACK
UV-5R5727MacOS crashes when upload completenew
should be closed soon
60
UV-5R5969Names not changing after uploadnew
61
UV-5R6013Uploading an image with cross tones set resets to TSQL. Does not happen when using CSVnew
62
UV-5R7385CHIRP fails to connect using Ubuntu 18 LTS & Prolific USB cable new
63
UV-5R7875Offset value not uploading to Baofeng UV-5Rnew
64
DONEUV-5R8321Incorrect tone values for ANI/PTT-IDclosed
65
UV-5R+8207Negative offset on marine channel is saved as positivenew
66
UV-5RA1823Split mode Duplex bug (this is not the standard complaint about duplex being converted to split!)new
67
UV-5RA1261CSV import causes tracebacknew
68
UV-5RA5193Baofeng UV-5RA Reboot While Cloningnew
69
UV-5RE3805when I was changing the "Select Columns:" some are either label wrong or picking the wrong column to turn Off or On.new
70
UV-5RE5399transmit power reversednew
71
UV-5RTP6893cannot set EU PMR frequencies ending in .5 kHznew
72
UV-5RTP, UV-F9V2+
6765keypad/menu changes will not be taken after programming with PC/Chirpstalled
73
CLOSEDUV-6R4639Download doesn't completenew
should be closed soon
74
UV-6R5247
UV6R, squelch settings are not able to be changed. After uploading new values to the radio, a subsequent download from the radio shows the original vales of 15 through 23.
new
75
UV-9R8357CHIRP only sees 23 out of the 128 channels.new
76
UV-9R8485General problems reported with serial communications reported by a reputated cable manufacturernew
77
UV-823577Any change to a single line will reset all memories with PTT ID (ANI) ienabled. Chirp crashes when attempting to re-enable a few. new
78
UV-82c5393Status Display Doesn't Show Proper Tx Power Statenew
79
UV-82c6061Can't use keypad after uploadnew
80
UV-82DX5745
Unfortunately these radios respond to the UV-82HP "magic" to initiate cloning but then report to CHIRP that they are a UV-5R. Result is a "Wrong model selected" error.
new
81
UV-82HP6261A lot of settings are missingnew
82
UV-82-III8191triband version: UV-82III VFO cannot enter frequency b/w 180 - 400new
83
UV-B52111With an extended ('hacked') frequency range UV-B5 the settings tab remains emptystalled
84
UV-B52405Chirp does not save/load subaudible tone frequencies properlynew
85
UV-B54991radio supports no TX option, but Chirp removed this functionalitynew
86
UV-B55037
Radio saves default 5 kHz step for each channel. When importing an image of it into another radio which checks stepping, a frequency of 145.7875 MHz will cause an error.
new
87
UV-B57953Baofeng UV-B5 unusable when written to by chirpstalled
extensive analysis, no resolution yet
88
89
Baojie
90
BJ-2188363parameters not saved correctly to or not read correctly from radio.new
91
92
BTech
93
GMRS-V16039Unable to import from stock config on BTECH GMRS-V1new
94
NO FEEDBACK
GMRS-V16831Suspected cable problemnew
should be closed in 1 month
95
UV-5X34211220 MHZ defaults to NFMnew
96
UV-5X34795Does not allow to set last digit of "446.00625" MHznew
97
UV-5X36515When programmed, I manually enter the frequency for the ± split for my 2 meter channels for repeaters. new
98
UV-5X36661change software window in Chirp that says to turn radio on: suggest to include turn volume to 100%, seems to help in some cases.new
99
UV-5X36809
Squelch levels are not saved (correctly); Additionally, the squelch level service settings for the 220 MHz band are missing. A fix (#5333) apparently did not help.
new
100
UV-5X38409Settings page emptynew