ABCDEFGHIJKLMNOPQRSTUVWXYZ
1
CEP Demonstration
2
No Data Entry on this tab. This tab displays the results of the evaluation.
3
4
Safe Harbor Evaluation
5
No Data Entry on this tab. This tab displays the results of the evaluation.
6
7
2005 All Electricity
8
Owned Assets
9
Co-owned facilities and units: Report data based on percentage of each facility or unit that is owned by the utility filing the report. If ownership is not correlated to actual energy received and associated emissions, report actual energy and emissions for baseline year assigned to the company filing the CEP. During the verification of the form by the Air Pollution Control Division, all data used to populate the form will be made available for review.
10
Plant: Report Plant or Unit Name of the asset
11
Primary Generation Type: Use the picklist to report the primary fuel or resource type for the asset.
12
Total Heat Input: Report the actual heat input consumed in mmbtu by the unit in 2005 for fuel fired units. Report zero if asset does not combust fuel.
13
% Heat Input Coal: Report the percentage of total heat input associated with combusting coal to the nearest tenth of a percent.
14
% Heat Input Natural Gas: Report the percentage of total heat input associated with combusting natural gas to the nearest tenth of a percent.
15
% Heat Input Fuel Oil: Report the percentage of total heat input associated with combusting fuel oil to the nearest tenth of a percent.
16
% Heat Input Biomass: Report the percentage of total heat input associated with combusting biomass to the nearest tenth of a percent.
17
Generation: Report the actual load produced by the unit in Net MWh in 2005.
18
CO2 Emissions Methodology: Use the picklist to select the method of determining CO2 emissions from the asset. Use the most specific data source available. Picklist is sorted in order of most specific to least specific, followed by zero GHG.
19
CO2 Total: Report actual CO2 emissions determined by the emission methodology for 2005.
20
21
Contract Purchases - Use FERC Form 1 or other relavent publically available data to report 2005 contract purchases.
22
Counter Party: Report the entity with which the contract is established.
23
Primary Generation Type: Use the picklist to report the primary fuel or resource type for the asset.
24
Purchases: Report the actual quantity of energy purchased in Net MWh.
25
Emission Rate Source: Use the picklist to select the most specific CO2 emission rate source for the contract. Picklist is sorted in order of most specific to least specific, followed by zero GHG.
26
27
Market Transactions - Use FERC Form 1 or other relavent publically available data to report 2005 market transactions. During the verification of the form by the Air Pollution Control Division, all data used to populate the form will be made available for review.
28
Market Name: Report the name each market from which transactions occurred in 2005.
29
System, Subregion, or Region Identification: Report the location of each market using the picklist. If sales are made into a market and the company system rate is used for emissions calculations, select Company System Rate.
30
Transactions: Report transactions conducted through each market with positive values indicating purchases and negative values indicating sales. Report separate lines for purchases and sales to each market if historical data is available. If separate purchase and sales data is not available, report net transactions through each market. Report energy in Net MWh.
31
Emission Rate Source: Use the picklist to select the most specific CO2 emission rate source for the contract. Picklist is sorted in order of most specific to least specific, followed by zero GHG.
32
33
Colorado Sales Information - Use FERC Form 1 or other relavent publically available data to report all retail electricity sales and all Colorado wholesale requirements contract sales that occurred in 2005. Report all contracts, including those that are excluded below from the baseline because they were no longer valid as of January 1, 2019 or because the customer intends to file their own CEP. Contact the Air Pollution Control Division with further questions. During the verification of the form by the Air Pollution Control Division, all data used to populate the form will be made available for review.
34
35
System Losses and SF6 Leakage - For Colorado system line losses, report all losses and SF6 emissions in the distribution row if data is not calculated separately for transmission and distribution assets.
36
For transmission and distribution systems that cover multiple states, report the quantity of SF6 emitted from Colorado portion of the system only.
37
38
2005 Baseline Adjustment Details - Report all contracts that are excluded from the baseline because they were no longer valid as of January 1, 2019 or because the customer intends to file their own CEP.
39
40
2030 All Electricity
41
Owned Assets
42
Co-owned facilities and units: Report data based on percentage of each facility or unit that is owned by the utility filing the report and consistent with modeling results submitted for the CEP.
43
Plant: Report Plant or Unit Name of the asset
44
Primary Generation Type: Use the picklist to report the primary fuel or resource type for the asset.
45
Total Heat Input: Report projected heat input for each asset from the CEP resource modeling. Report zero if asset does not combust fuel.
46
% Heat Input Coal: Report the percentage of total heat input associated with combusting coal to the nearest tenth of a percent.
47
% Heat Input Natural Gas: Report the percentage of total heat input associated with combusting natural gas to the nearest tenth of a percent.
48
% Heat Input Fuel Oil: Report the percentage of total heat input associated with combusting fuel oil to the nearest tenth of a percent.
49
% Heat Input Biomass: Report the percentage of total heat input associated with combusting biomass to the nearest tenth of a percent.
50
Generation: Report projected load produced by the unit in Net MWh from the resource plan modeling for the CEP.
51
CO2 Emissions Methodology: Use the picklist to select the method of determining CO2 emissions from the asset. Use the most specific data source available. Picklist is sorted in order of most specific to least specific, followed by zero GHG.
52
CO2 Total: Report actual CO2 emissions determined by the emission methodology for 2030.
53
54
Contract Purchases - Report contracts that are included in the load forecast used for resoure plan modeling of the CEP.
55
Counter Party: Report the entity with which the contract is or will be established.
56
Primary Generation Type: Use the picklist to report the primary fuel or resource type for the asset.
57
Purchases: Report the projected quantity of energy purchased in Net MWh.
58
Emission Rate Source: Use the picklist to select the most specific CO2 emission rate source for the contract. Picklist is sorted in order of most specific to least specific, followed by zero GHG.
59
60
Market Transactions - Report market transactions that are included in the load forecast used for resoure plan modeling of the CEP.
61
Market Name: Report the name each market from which transactions are expected to occur in 2030 based on current or expected market participation.
62
System, Subregion, or Region Identification: Report the location of each market using the picklist.
63
Transactions: Report transactions projected through each market with positive values indicating purchases and negative values indicating sales. Report separate lines for purchases and sales to each market if modeling data is available. If separate purchase and sales data is not modeled, report net transactions modeled through each market. Report energy in Net MWh.
64
Emission Rate Source: Use the picklist to select the most specific CO2 emission rate source for the contract. Picklist is sorted in order of most specific to least specific, followed by zero GHG.
65
66
Sales Information - Report projected retail and Colorado wholesale contract sales included in the load forecast used in resource plan modeling for the CEP. Report all contracts, including those that the customer intends to file their own CEP.
67
68
System Losses and SF6 Leakage - For Colorado system line losses, report anticipated losses and SF6 emissions in the distribution row if data is not calculated separately for transmission and distribution assets.
69
For transmission and distribution systems that cover multiple states, report the quantity of SF6 emitted from Colorado portion of the system only.
70
71
2030 Adjustment Details - Report all contracts that the customer intends to file their own CEP.
72
73
Interim Year Summary
74
This tab is not used for determining acceptability of a CEP, nor any compliance determination with AQCC regulations. It is submitted for information purposes only to inform GHG reduction planning activities.
75
Report Total Load, Beneficial Electrification Program Load, Total GHG emissions, and Total CO2 emissions for each calendar year based on forecasts submitted with resource planning activities.
76
77
Lists and Lookups
78
If Biomass fuels are used, enter the appropriate emission factors based on fuel type.
79
For long term contract transactions, enter contract specific emission rates based on all generation assets included under the contract.
80
For company system rate emission factors, enter the appropriate emission factors for the electricity pool supplied by the company. During the verification of the form by the Air Pollution Control Division, all data used to populate the emission factors will be made available for review.
81
If additional lines are necessary for contract transactions, they must be added above the line titled "LEAVE BLANK" and data must be entered in alphabetical order in the first column in order for the vlookup function to work properly.
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100