| A | B | C | F | K | L | M | N | O | P | Q | R | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | No | Student | Supervisor | Title | Presentation | Rinkoh | Report | ||||||
2 | Name | Metric Number | Name | Examiner 1 | Examiner 2 | Non SV | SV | Non SV | |||||
3 | Examiner's overall comments and suggestions | Examiner's overall comments and suggestions | Examiner's overall comments and suggestions | Examiner's overall comments and suggestions | Examiner's overall comments and suggestions | ||||||||
4 | 1 | ABDUL ARIF HAKIMI BIN SAMSUL BAHRI | A19MJ0152 | HAFIZAL BIN YAHAYA (DR.) | CROSS-LINKED POLYETHYLENE BASED NANOPARTICLES AS ELECTRIFICATION MEDIUM FOR TRIBOELECTRIC GENERATOR | Good effort | overall is a good presentation | Keep it up! | please put additional information related to the material used. discuss on the mechanical and chemical properties of the material, please put gantt chart | https://drive.google.com/open?id=13AgXcYEGAX1MA4yDe6mDLnQu0t9k9oHz | Overall okay but some part need to be improved (refer to the comments in thesis). | https://drive.google.com/open?id=1OnhHZo370sIYULWpI58uWBABjL5SsbF5 | |
5 | 2 | ABDUL HAKAM BIN MOHD HAMZAINI | A19MJ0187 | NURSHAFINAZ BINTI MOHD MARUAI (DR.) | Numerical investigation on passive vibration control geometry to enhance the prospect of low wind energy harvesting. | Need to work harder | more fundamental information need to be presented so that it is easier for audience to understand. | Student is suggested to do literature review. The understanding on the vortex induced vibration is still weak and the methodology not clear, | Student needs to put more effort for FYP 2 | https://drive.google.com/open?id=1qeTq7CFO816OqbMOVT_BjamDn77X-OU8 | The literature review have no brief introduction to open the chapter, the information suddenly presented in bulk. The methodology part of this project is not written in organized and clear manner Overall, the report writing need a lot of improvement, the information is there, but lack of report writing skills unable the reader to organized the information. | https://drive.google.com/open?id=1CtgGvCJucCBFHmV00OVX2Qy2vXA_qcY6 | |
6 | 3 | ABDUL RAUF BIN ABDUL SAMAD | A19MJ0003 | JUN ISHIMATSU (DR.) | Ultrasonically improvement for small size CNC machine | Need to work harder | presentation is understandable | Good in general | prepare for experiment | https://drive.google.com/open?id=1cP8rq3qCP7F-u91J6t67sDQyVH94-QXL | Overall is good. However, there are some parts need to be improved (refer to the comments in thesis) | https://drive.google.com/open?id=1b9RViA6Kp021WkJrZ9nV3tB_7U2N1KYI | |
7 | 4 | ABDULLAH AIMAN BIN ZULMAJDI | A19MJ0161 | AHMAD MUHSIN BIN ITHNIN (DR.) | Development of Mix-On-Demand Water-in-Biodiesel Emulsion Fuel Supply System for Diesel Engine Application | Good project | okay sufficient information provided | need improvement on report flow. Improve research objectives and problem statement. | Overall good report. Detail comment is stated in the sribbled report | https://drive.google.com/open?id=1wa16MiH7ORgVAIjl7vcY5h4m0OiFP8E0 | overall ok, need some improvement in report writing skills | https://drive.google.com/open?id=1k4WDJtJiMDidiP16bSeyZAVHVz18E_DM | |
8 | 5 | AFIF SYAHMI BIN ABD RAHIM | B20MJ0001 | MOHAMED SUKRI BIN MAT ALI (DR.) | Design anechoic chamber for aeroacoustics measurements | Good | ok | Good | Theoretical noise measurement need to be added. | https://drive.google.com/open?id=1b3HmsTOKN6yewPgHT1ZW_vRHEPZXDyJ5 | Overall is good. However, there are some parts need to be improved (refer to the comments in thesis) | https://drive.google.com/open?id=1yrWg1WpK_Ev75UBMjkoMAHl61ACmYGnD | |
9 | 6 | AHMAD AIMAN BIN MOHD KAMARUDZAMAN | A19MJ0009 | KANAO FUKUDA (PROF. DR.) | Effects of Materials on the Ball to Ball Sliding Phenomena in Different Humidity Environment | overall, the presentation is good and answer all the question very well. | overall ok | Title mentioned different materials, but only present one material in his objectives. suggestions: use term hydrophobic surfaces instead of different materials | Need further understanding on the objectives. | https://drive.google.com/open?id=1eSFNlvRHWcbVH63My0mj1RwmXb4vkTTR | the theory better to be put in the literature review and explain together with the machine used to analyzed. need to add more information on the machine used. The mechanism of how this machine works and link the information get the value of frictional force, surface roughness etc chapter 1 need to put gantt chart, to show the progress. | https://drive.google.com/open?id=1zTK2TDJpOzk5dH_-REmEwiOauwsSIT20 | |
10 | 7 | AHMAD AMIRUL SYAFIQ BIN AHMAD SALMI | A19MJ0153 | TAN LIT KEN (DR.) | Deep Learning Based Human Detection using Unmanned Aerial Vehicle | good presentation, but please improve the way of presentation not to read the text. | how many independent runs? overall project presentation is ok | Need to read more journal papers. His understanding on the task is not good enough. | Okay, but methodology need to add more. | https://drive.google.com/open?id=1MpgnbfC31vKohvkwmHBx-4ABssOYeGS7 | refer to the comments in thesis | https://drive.google.com/open?id=1Ph94N2QUCHLaK9m2MU1ugjdyIcs6DEMg | |
11 | 8 | ALI ADNAN BIN JIHANGIR | B20MJ5004 | AHMAD FAIZ BIN MOHAMMAD (DR.) | Precision measurement of the ventilation rate of a windcatcher model using wind tunnel | It is better to present not to read text. | overall ok | The candidate can put more effort to understand his project & present his work better. | Needs major revision. Please refer to the marked report. | https://drive.google.com/open?id=1lzRIS-0QLnVbr2Ve1CuT5c1ezOhlN29S | Overall the information need to be improved, especially the introduction and literature review. The information not connected. Methodology: the flows are quite clear but the explanations are not in details. | https://drive.google.com/open?id=1076ddV26CVVk7g31IM7NZ27YC_yxD-a0 | |
12 | 9 | AMAR DANIEL BIN MOHAMMED AMIR | A19MJ0155 | FARAH LIANA BINTI MOHD REDZUAN (DR.) | Performance Enhancement of Thermoelectric Generation System in Cooking Stove Application | very interesting visual aids, | ok | The research is quite interesting and the student seems to understand their research. | very well written report overall. | https://drive.google.com/open?id=1lj7ZKCvqli1MHTnc-f7o70JIspev-BUD | please refer to the comments in thesis | https://drive.google.com/open?id=1QSSYyTXAw2vPzi5IM2MnbMldzhRzGPEK | |
13 | 10 | ARMAN FAED BIN SHAIFUL NIZAM | A19MJ0156 | NOR’AZIZI BIN OTHMAN (TS. DR.) | Influence of fluid velocity and density on vibration in pipe conveying fluid (fixed – free boundary condition) | better present not to read text, | student not properly ready, reading the slides, slides full of text. | Good project and need to work harder. | overall are good | https://drive.google.com/open?id=1slnHh0-gRiaiYFbLma9vjFI703edrOEz | abstract need to rearrange, starts with general info , and application then follow with problem statement and literature , then methodology please add significant of study and research motivation not mention on the ANSYS used. Best to put additional information such as, others software available that also can be used. what is the pro of using this ANSYS. | https://drive.google.com/open?id=1uJv7twgAkkNXK5K5voHRr4XSYJWaX6yu | |
14 | 11 | BALYA MUHAMMAD PUTRA BIN AKSON | A19MJ3015 | TAN LIT KEN (DR.) | Visual Speech Recognition using Geometrical Features | Good presentation | Great presentation | Need to read more papers and understand the method | Please add on LR, methodology, results and conclusion. all too short! | https://drive.google.com/open?id=1SBaRwkEaovqdrQcpnGvOAoGCSizWr5nq | Please revise the report based on the comment in the marked report. | https://drive.google.com/open?id=1Cs6EE3np2z8rhRa_sybuJDwM2IqX1ioU | |
15 | 12 | CHEANG WEI ZHAO | A19MJ0139 | USWAH BINTI KHAIRUDDIN (DR.) | Lab personnel detection for lab management and safety | Good project | Good presentation | Has a good grasp of what is expected of him & is working to accomplish it accordingly | So many blank pages. The writing style is a bit too casual. student should study academic writing style. Some formatting issues | https://drive.google.com/open?id=13O9VJDRAVs01TA17U3Gt9U5O6sqlq8p- | Very good project. Please refer to the marked report for improvement. | https://drive.google.com/open?id=1BE9irxTaGsaVZg7na3R51kfUMyNVJfqR | |
16 | 13 | EIMRAN ZHARIFF BIN ENES ZALMAN | A19MJ0031 | TAN LIT KEN (DR.) | River Debris Detection and Classifications using Deep Learning | Good project | Good presentation | Need to improve communication skills | Logbook doesnt have reference, please add. Methodology and LR is too short. | https://drive.google.com/open?id=1z1mebxjiW2UvXPxk7wvW5e4UJZqKcnrZ | Please revise the report based on the comments in marked report. | https://drive.google.com/open?id=1RGc4RT8VVUUmyxU213-t0htMWAYhPGsQ | |
17 | 14 | FAIZUL IRFAN BIN MOHD NOOR | A19MJ0032 | FARAH LIANA BINTI MOHD REDZUAN (DR.) | Fundamental of Thermoelectric Radiant Panel Cooling Operation For Small Room In Tropical Climate | Good project | Great presentation | The research is quite interesting and the student seems to understand their research. | a very well written and comprehensive report. | https://drive.google.com/open?id=1AQ_QnyAsqTarNtMphQ7fAEotYA1zLm69 | Well-written report. Please refer to the marked report to improve. | https://drive.google.com/open?id=1XjrKpQT08OvIE31gkx97aeu2N3hjyx2K | |
18 | 15 | ILMI HAIKAL BIN MOHD YUSOFF | A19MJ0162 | LIM MENG HEE (ASSOC. PROF. IR. DR.) | Automated Machinery Condition Monitoring Using Cloud Computing Platform | Good project | Need to improve the presentation slides and story telling | Generally good presentation | Good | https://drive.google.com/open?id=1fAqgSq0PZ3sq74NexElInhlfImfunoRG | Please revise the report based on the comments in the marked report. | https://drive.google.com/open?id=1AT1pZUavg3EqekYWastKc3s6X2fni9Qk | |
19 | 16 | JAYAKUMAR A/L THOMAS | A19MJ0195 | PAUZIAH BT MUHAMAD (ASSOC. PROF. IR. DR.) | MONITORING THE PHYSIOLOGICAL CONDITIONS ON GROWTH OF ALGAE PLANT USING ARTIFICIAL TECHNOLOGY | better to narrow research focus | Good presentation | Good presentation, keep up the good work | well explained of the proposal. Just need to refine some of the pictures which are blur. The references also need to follow the standard. Overall this proposal is well written and hopefully can get the desired outcomes during FYP2. | https://drive.google.com/open?id=1cDpUYKGPwjl1ORST2o2MIxhwgGkAdvPZ | What is criteria for judgement? | https://drive.google.com/open?id=1fLCkQMLB9_1-xOSG_3UFM4RnTtvSkSo1 | |
20 | 17 | KANIA ADMIRANTI | A19MJ0165 | KANAO FUKUDA (PROF. DR.) | Influences of the Time and Frequency of the Sliding on the Sticky Keys Problem of Piano | so far good progress | Need to highlight the special features of the design | Problem statement is not clear. | Need more detailed explanation for each item | https://drive.google.com/open?id=1I_wnJqalaSWJ_xmC56ETTgNhGMoEqSna | Overall is fine. Refer to comments in marked proposal | https://drive.google.com/open?id=1UK6fUYQaCDZPmULJxDG7raGwI-ZE7yTO | |
21 | 18 | MASFAREEZAN BIN MASNOOR | A19MJ0200 | SAMSOL FAIZAL BIN ANIS (TS. DR.) | Design and development of medical waste to energy for a sustainable future | need to specify speciality of 'Medical waste' | Good but must highlight the uniqueness of the design n how it is unique compared to existing designs | OVERALL ARE GOOD | The proposal is well explained. Need to add more references. | https://drive.google.com/open?id=1-Ro2geTO___J6NnvmZKGNbxaBGjSNUVH | Evaluatio criteria is subjective | https://drive.google.com/open?id=1IRwdRceSoVF3GLYlQ4Y8hwAT4UPeqrMy | |
22 | 19 | MELVENT FAVIUS MARCUS | AA19MJ0047 | AMINUDIN BIN ABU (PROF. TS. IR. DR.) | Fluid velocity and density on vibration in pipe conveying fluid | Good project | Student understands his project well, but needs to improve clarity in explanation and conciseness of presentation. | Good project. | ok | https://drive.google.com/open?id=1WaiLeDw5md7556zDUrYxbY14kjmmru3T | Main comment: Objectives (to investigate effect of natural frequency) and results (showing effects of natural frequency and pipe material) are not clearly linked with the project title and problem statement (effects of flow velocity and density). Alignment of problem statement, objectives, and methodology may be needed. Other comments: 1. Abstract-A brief background and mentioning of the core problem would complete the abstract. 2. Scope-should be further elaborated to draw the limits/boundaries of modelling works. 3. Methodology-CFD modelling procedures and fluid operating conditions should be further detailed out. | https://drive.google.com/open?id=120yzagHiRWha8M3l4NVeyH1XjLa3H4BY | |
23 | 20 | MOHAMAD HUZAIMI IMRAN BIN MOHAMAD NOOR | A20MJ3010 | AHMAD FAIZ BIN MOHAMMAD (DR.) | Wind load determination of a building model with precision techniques using wind tunnel | Good project | ok | The candidate can put more effort to understand his project & present his work better. | Needs major revision. Please refer to the marked report. | https://drive.google.com/open?id=1wcV_VEBxrz3yR5ffijczO0XVTF5tVyl6 | What is experimental conditions? better to put summary | https://drive.google.com/open?id=11xydmrn9H8O8GlsvjF8x6782vAo6vYKi | |
24 | 21 | MOHAMAD RASYDAN HAKIMI BIN MOHD.ROZI | A19MJ0050 | NORHASNIDAWANI BINTI JOHARI (DR.) | Durability performance of smart coating in Malaysia | good presentation. the method to coat the sample with diffrent thickness need to be explained in more detail | Slide too crowded. Expected results should not show images from literature. | Overall good. | Please refer to the comment and revise the report. | https://drive.google.com/open?id=1I3ADLPHb9NIcv_blCK-GCK3WJ50Xqn8t | Overall good report. However, on the methodology of the durability test need to be defined, as durability normaly associated with long term testing condition | https://drive.google.com/open?id=1GYPz2Dnu0FhNfv5lljOlKuLbWapjHk1P | |
25 | 22 | MOHAMED SHUKRI BIN MOHAMED ISMAIL | A19MJ0051 | WIRA JAZAIR BIN YAHYA (ASSOC. PROF. DR) - Sabbatical Leave | Performance and Emissions of a Single Cylinder Diesel Engine Fuelled with Crude Palm Oil Emulsion | not clear in terms of methodology | Student does not seem to understand the bigger picture (real world implication) of his study. Needs to learn proper citation format. | OK | Abstract was not properly prepared. Need some improvement in literature review and discussion. | https://drive.google.com/open?id=15zE8sOXEstjfiidE7nnjazZ2t0c5Ofce | some formatting issues. Chapter 1 and 2 good enough. Chapter 3 and 4 seems incomplete | https://drive.google.com/open?id=1DRnHPwFixoKmL860P5Q2h0hM0Qi_4mQ8 | |
26 | 23 | MOHAMMAD ABADA TAWFIK | A19MJ5236 | LIM MENG HEE (ASSOC. PROF. IR. DR.) | Automated Quality Inspection of a Production Line Using Cloud Computing Platform | fair presentation. The methodology should provide the flow chart | Overall, the student understands his project. But he needs to explain how his results relate to actual applications. | Confidence and good | Good | https://drive.google.com/open?id=1t3bL7NDOI22g_LpPuSNl-zdQIbyTS3gK | Fair reporting. The research more towards electronics studies rather than mechanical. Some formating issues, not following UTM thesis format | https://drive.google.com/open?id=1WStv0irJysaMye9YlkaNprKEic5IGmAp | |
27 | 24 | MUHAMMAD AIMAN BIN AHMADI | A19MJ0204 | NURSHAFINAZ BINTI MOHD MARUAI (DR.) | Numerical investigation on tandem bodies configuration to enhance the prospect of low wind energy harvesting. | fair presentation | this student needs to understand better about the background and motivation of this research. | Student need more study on numerical procedure (CFD) | The equation for energy from piezoelectric material needs to be confirmed. | https://drive.google.com/open?id=1ltjDtxGwdfJ-lo-HzcSKBD13azTfAzG9 | Good reporting! LR summary and gap missing, some organization / formatting issue | https://drive.google.com/open?id=1KpgnrV9tMtXMy77uSFBIwa9oIFTKM223 | |
28 | 25 | MUHAMMAD AIMAN BIN KAMARUL BAHARIN | A19MJ0059 | AHMAD FAIZ BIN MOHAMMAD (DR.) | MESH OPTIMIZATION OF 2D AND 2.5D VERTICAL-AXIS WIND TURBINE MODELS USING STRESS BLENDED EDDY SIMULATION | good and clear presentation | overall ok. reference need to be checked, maybe need to see the latest once on naca0015 selection. | Good candidate. | Lit review is not detailed enough. Mesh optimization is not yet achieved for 2D simulations. It must be completed before proceecing to 2.5D. Please refer to the marked report to improve. | https://drive.google.com/open?id=1du4mc-9RZutmkH-ouUt_hX4B-xEgFjXq | Good report. Some formating issues in the report | https://drive.google.com/open?id=1h_yYMTuId2-GEptazzaS9h1HD6xvL-L9 | |
29 | 26 | MUHAMMAD AL UZAIR BIN MOHAMED | A19MJ0062 | HAFIZAL BIN YAHAYA (DR.) | POLYTETRAFLUOROETHYLENE BASED NANOPARTICLES AS ELECTRIFICATION MEDIUM FOR TRIBOELECTRIC GENERATOR | Problem statements are not clear, what is the drawbacks of the usage PDMS and why need graphite as a fillers. | Good presentation overall. | Very good work on research study. | overall the report is good, but need to add information related to material used in term of mechanical and chemical properties. | https://drive.google.com/open?id=1PKpMM2Bjzf9xL4K9Gmfr37ulEpknsFVk | refer comments in the marked proposal | https://drive.google.com/open?id=1VOKn8zLGRP45Ug4-XPXGZPmmwfUppXrE | |
30 | 27 | MUHAMMAD ARIF FARHAN BIN MOHD FAHIMEY | A19MJ0063 | FARAH LIANA BINTI MOHD REDZUAN (DR.) | PERFORMANCE ANALYSIS OF THERMOELECTRIC MODULE UNDER DIFFERENT THERMAL BOUNDARY CONDITIONS | Slides and presentation was good. if possible please highlight why choose thermal boundary approach, not many studies is not a good answer, explain the importance of this approach | Good presentation overall. | The research is quite interesting and the student seems to understand their research. | a very well organized report | https://drive.google.com/open?id=1_gq1B9kBJ3iSCWEbXGgWCw_FXaY5tdZG | Good. Refer to the comments in the proposal. | https://drive.google.com/open?id=1ZonbxncxYoR5TMffcPFENUbL1setZiIT | |
31 | 28 | MUHAMMAD AZIM SYARAFUDDIN BIN MUSTAPAH | A19MJ0207 | NUR AZMAH BINTI NORDIN (DR.) | Thermal Stability of Magnetorheological Grease with Addition of CoFe2O4 Additive | Too many words in slide, student take almost 10 min for presentation. Expectation result is not clear, what are the precentage improvement if add 5wt% ? Justify why highest particle is 5wt% not 10 wt% as an additive. | Very good topic. Examiner can grasp the idea of this project. However, student delivered limited information and answer during Q&A probably because of too nervous. | The student is able to understand the fundamentals concept and well presented all the information during rinkoh. He managed to do the experiments under supervision and had discussions if any problem encounter. | Need more understanding on the project and refer to the SV | https://drive.google.com/open?id=1Lfea4g5PHkuz_xN6BuSzASs7nyJ3J6Rd | Similiarity index (Turnitin) is quite high. Well organized proposal. | https://drive.google.com/open?id=1XiqYGXKjCuRJqDUA16SxvwdMYsh7OYkf | |
32 | 29 | MUHAMMAD FARID IZZUDDIN BIN CHE RAMANI | A19MJ0209 | SHEIKH AHMAD ZAKI BIN SHAIKH SALIM (ASSOC. PROF. DR.) | Effectiveness of operable IOT windows system based on outdoor thermal environment | Justify why level 2 and 3 are selected not level 1 or 4? please describe the equation for the mathematical model | Very good topic. Really practical. Examiner can grasp the idea of this project. However, student is not preparing sufficient information (no specific methodology, no figures, no expected results), hence the presentation is somewhat limited. | This student have good knowledge in research | Please refer to your thesis. | https://drive.google.com/open?id=1oTfCg8apXSmfYQqDumFJmBs9VtOPLCIP | Good. Refer to comments written in the proposal. | https://drive.google.com/open?id=1y3wW2oFTiuAVDmpJE7iTA_d-mQMHyyS5 | |
33 | 30 | MUHAMMAD FEROZ BIN AFZAL SHAHID | B20MJ0003 | LEE KEE QUEN (DR.) | CFD Analysis on the suppression effectiveness of axial slat on a single cylinder | methodology not clear, dimension, material and method of fabrication of disk plate are not describe. justification using current shape of disk plate must included | Very good topic. Examiner can grasp the idea of this project. | ok | student should include significance of study and conclusions in his writing. | https://drive.google.com/open?id=14a4_qCxOEmQJNqGvIiSv-KuoignD2HOZ | Proposal does not follow UTM format, high similarity index (Turnitin), chapter 3 and 4 are mixed up, no conclusion, no information about research gap, previous study on vortex breaker. Methodology on design or fabrication of vortex breaker is not included in the proposal | https://drive.google.com/open?id=1giQlQep7cZgHoI_SlAGrujJs2GE2WvGf | |
34 | 31 | MUHAMMAD HAIKAL BIN MOHD FAIZ AZMI | A19MJ0070 | JUN ISHIMATSU (DR.) | Influence of frequency in ultrasonically exciter on grinding wheel | overall ok. very good presentation | ok | Good in general | prepare well for experiment | https://drive.google.com/open?id=18bBVUiBjbrwH9AUD4xIWZ5C0rPvXZvTl | overall good | https://drive.google.com/open?id=1_YHQwO9FAllJPcuKkOH2Mp02a1UM_XV7 | |
35 | 32 | MUHAMMAD HAZIQ BIN RAZALI | A19MJ0073 | NOOR FAWAZI BIN MD NOOR RUDIN (DR.) | DESIGN AND OPTIMIZATION OF SHAFT BRACKET OF DRUM BRAKE FOR HEAVY DUTY VEHICLE | ok | ok | frequent update is ok but need to speed up | check format and description on flow chart. flow chart ok. pre-results require technical explanation | https://drive.google.com/open?id=10qd5yGGP17e2IcdcOTm0-QNoAoX0Fzx_ | Please refer to the marked report and improve. | https://drive.google.com/open?id=1PmAblSuf0XFt_endy_43KNHybW5YRSJl | |
36 | 33 | MUHAMMAD IZWAN BIN WAN KHAIRUZZAMAN | A19MJ0147 | AHMAD MUHSIN BIN ITHNIN (DR.) | Biodiesel-Hydrogen Dual Fuel For Single Cylinder Diesel Engine Application | lack of data for pre-results | Student need to improve his explanation and understanding of his project and relate it to bigger picture (application). | do more literature review on hydrogen and water in diesel emulsion | Many formating issue. Abstract and scope need to rewrite | https://drive.google.com/open?id=1l7oY4V1Aw2DTD8OaRCCfRq_JerykTCbs | neat report, Background contains some materials suitable for Lit Review. Lit Review section is too long and includes some irrelevent sections (e.g: Diesel engine). In Method, author should include more details on experimental setup and project management such as plan, gantt chart, budget etc | https://drive.google.com/open?id=1Zv7LHXibxFOLXJZ65Sc_BufHOgnf37XL | |
37 | 34 | MUHAMMAD SUFIAN BIN ELFI | A19MJ0214 | NOOR FAWAZI BIN MD NOOR RUDIN (DR.) | DESIGN OF A 3D-PRINTED THREE-CLAW GRIPPER | ok | Student not clear on his project. | keep the progress | keep up the good work. check the format and paragraphing - chapt 3 | https://drive.google.com/open?id=1uw1j4EBpn9aEAAsHkB-U_v-7aCjnWZ16 | Please refer to the marked report and improve. | https://drive.google.com/open?id=1dsB4zuu4SzT7V9TXqDPa5D7bsIvIWTHy | |
38 | 35 | MUHAMMAD SYAHMI ISYRAF BIN HAZAREEN | A19MJ0076 | AHMAD MUHSIN BIN ITHNIN (DR.) | Combustion performance and exhaust emission of single cylinder diesel engine fueled with biodiesel emulsion fuel blended with nano-metal additive | expected result/pre seems lacking | Student needs to be able to explain his research in laymen terms. | Need to improve communications and idea projections. | Good. please refer the scribled report for my detail comments | https://drive.google.com/open?id=1mmqfQ8PilEnpEMFRj-wICNKiejhnP4Jk | ok | https://drive.google.com/open?id=1om1tar79HrIiXekoVOXL259F_bVkg2Te | |
39 | 36 | MUHAMMAD ZA'IM IDZNI BIN MOHD DAUD | B20MJ0004 | SHEIKH AHMAD ZAKI BIN SHAIKH SALIM (ASSOC. PROF. DR.) | Numerical study on the effect of outdoor thermal environment on different configuration of airwell of terrace house | Not clear on main objective. Need to properly define airwell (is balconies air well?). Need to translate measured parameters into thermal comfort. | Need clear statement on the problem. | This student show good performance | Please refer to the thesis. | https://drive.google.com/open?id=1HTpjDI-9f0IRhnrVNIzh3bLLrql-jbW_ | As stated in the draft. | https://drive.google.com/open?id=1o1KONqNe48znufoJtPrc5W0dL9xOH46e | |
40 | 37 | MUHAMMAD ZAHIRUDDIN BIN ZULKIFLE | A19MJ0081 | NOOR FAWAZI BIN MD NOOR RUDIN (DR.) | Lightning Strike on Wind Turbine Blade Composite (CFRP) | #N/A | #N/A | frequent update is ok but need to speed up | #N/A | #N/A | #N/A | #N/A | |
41 | 38 | MUHAMMAD ZHARIF SYAHMI BIN ALI RAHMAN | A19MJ0082 | MOHAMAD FADZLI BIN HANIFF (DR.) | Cloud Based Monitoring System Using Mobile Apps and Microcontroller for Air-Conditioning System Power Estimation and Comfort Measurement | Need to improve presentation skill and communication. | Need a clear statement of the problem. | ok | please at least read, relate and filter the information from previous student before reusing the information | https://drive.google.com/open?id=1PDk481FtMbZau7Kt0uHf4mvajKkOvEye | Good work | https://drive.google.com/open?id=1zGuMKFZ_mvgC7s8XqkNzkbOyXBlX2SvB | |
42 | 39 | NORSYAQIM IQBAL BIN FOZEE | A19MJ0217 | MOHAMED SUKRI BIN MAT ALI (DR.) | Design Energy Harvesting System Utilizing Flow Induced Vibration | Need to justify the use of FIV to harvest energy instead of using any other methods. For example, for low velocity flow, people can use micro turbine. Turbine can have energy harvesting efficiency about 40 to 50%. Can FIV beat this? Maybe FIV could be used in certain critical condition where turbine is not suitable to be placed. Please find this example. | Need a clear statement on the problem. | The student is adapting to his research work. | Methodology on how the vibration and energy will be measured need explanations. | https://drive.google.com/open?id=1CDLyq5Sn_AvfiSHXIB2LB_piMhwYCGEa | Problems and objectives are not clear. | https://drive.google.com/open?id=1e8M4RxNXcWp5R1i73QFU_MS9PQvAy7GH | |
43 | 40 | NUR AIDA FITRI YANI | A19MJ0169 | USWAH BINTI KHAIRUDDIN (DR.) | Object classification in murky underwater environment | Presentation runs out of time. Needs to be more concise. | Very good presentation. Maybe student should elaborate more what is the exact outcome that student want to achieve -- apart of picture improvement; and why does the student choose statistical method as her research methodology. | She is progressing well with her work and is on the right track | Good reporting | https://drive.google.com/open?id=1abhP7PHzgXVdNPDSKA6BzqX6_r0B1TiK | A very well-done report. I have none to highlight, except please double check punctuation, appropriate capital letter/small letter and format of the thesis. Kudos to the student and supervisor. | https://drive.google.com/open?id=1xZRpyeapn_DxWKZtKfaPHMGTOjxBqhIl | |
44 | 41 | NUR HAZIQAH BINTI ZAINUL AHBAR | A19MJ0092 | NORHASNIDAWANI BINTI JOHARI (DR.) | Corrosion behaviour of nanocoating on metal substrate | Very good | Overall a very good project. Student needs to be more specific in nickel-cobalt nanocoating and what is the expected result to achieve. Writing the name of nickel-cobalt nanocoating itself in literature review is too general. | Overall good. | Please refer to the comment. | https://drive.google.com/open?id=1VVPz_PEQUmNK9fo0K-Fj6IeAY2WeOMtR | Good. Refer to the comments in the proposal. | https://drive.google.com/open?id=1i5vuOEIp6nuAUIGn7Xw1eAS4XwUdOhst | |
45 | 42 | NUR IRDINA BINTI MOHD SHAHFRIZAN | A19MJ0093 | NURULAKMAR BINTI ABU HUSAIN (ASSOC. PROF. IR. DR.) | Damage identification of a beam using Experimental Modal Analysis | Very good | Overall a very good project. | She shows a good understanding of the topic | Adequate report for FYP1 with minimal error in formatting and language. | https://drive.google.com/open?id=16WcIebrN7wJuV7UQNZC9ZQ7huK1t9LGs | Good report in overall. Need to work on grammar and punctuation mistakes. Please refer other comments in marked report. | https://drive.google.com/open?id=1snIhDeKLbTVyp2BpONJs1drEVc0Imim_ | |
46 | 43 | NUR IZZAH SYAMIMI BINTI MOHD NIZAM | A19MJ0221 | LEE KEE QUEN (DR.) | Flow Intensity Improvement of water tank through honeycomb design | Very good | Overall a very good project. Strongly suggest for the student to compare the honeycomb filter with 5 sides-filter and 7 sides-filter, instead of comparing with square and diamond. | ok | This report is completed with all necessary items/sections. Explanation can be improved, but overall the student has done a good work. | https://drive.google.com/open?id=1LLGGbgZ2pfjrhtOBur4Hwp4dtes3Tw50 | Good. Refer to the comments in the proposal. | https://drive.google.com/open?id=1BiSUX-KzJuBdHmYr1kUtewyCEGYyzmIh | |
47 | 44 | NUR SHAFIQAH BINTI RADZI | A19MJ0095 | LEE KEE QUEN (DR.) | Effects of mass ratio on the vortex-induced vibration of cylinders | clear understanding | Some critical thinking required to understand more on the subject matter. | ok | please refer to the comments in the thesis | https://drive.google.com/open?id=1Dsw7yg6n-N7XRkcNwN7gg8oUGd_OEEqH | good | https://drive.google.com/open?id=1IQA-pSdVkFzViLjsZNXWjalqnMGRN7xn | |
48 | 45 | NUR ZETTI BINTI ISHAK | A19MJ5148 | NORHASNIDAWANI BINTI JOHARI (DR.) | The impact on mechanical properties and corrosion resistance of nanocoating | good. need explain on the advantage | Need to understand the difference between mechanical properties and functional properties. Abrasion resistance is actually a functional property. | Overall good. | please refer to comment and do the correction | https://drive.google.com/open?id=11R3yaCxGhqO7BqakOw2DzJhXejjotAbG | he proposal is clear on the objectives and methodology. The project can be archived the target to look into the optimum thickness of the nanocoating using silica and epoxy to a carbon steel. In the literature review shall have additional processes of the preparing the samples so that can be understood why you had the decision at methodology part. overall this proposal is well understood. Well done | https://drive.google.com/open?id=1X9bDKA6cIsvvPC-duxVv37R2FruR9pGG | |
49 | 46 | NURFARHANA NADHILAH BINTI MOHAMED HARITH | B20MJ5003 | NURULAKMAR BINTI ABU HUSAIN (ASSOC. PROF. IR. DR.) | Effect of beam profiles on structural damage | good | Student understands her project goals, but can be improved in terms of justifying the decisions made to execute the project, eg methodology etc. | She shows a good understanding of the topic | Overall, a good report. | https://drive.google.com/open?id=1EO1fXuHzDNB_vn6uL_kL8n04qI2-OgHp | can check from the attached file | https://drive.google.com/open?id=1O7lbQbMHhd5p0eYYzVkMND8NnQWEObOX | |
50 | 47 | NURUL FARAH HANIM BINTI AB HAMID | A19MJ0222 | SHAHIR YASIN BIN MOHD YUSUF (DR.) | Optimisation of 3D Printing Parameters in Multi-Material 316L SS/Inconel 718 Fabricated by Fused Filament Fabrication Technique | good | Overall ok | Student display a good attitude. Need improvement in communication and better way to explain her works. | Please refer to comments on the marked report and improve. | https://drive.google.com/open?id=16oGtQQFUjBByrdlimN-CRiLBmzWn3mkc | It was very hard to understand the need of the research from this proposal as the objective, scope and significant of the research are not clearly stated. The abstract shall be strong and have all components such introduction, objectives, method, results discussion and conclusion. But hardly been seen from this proposal. The literature also not very convincing and lack of critical discussion of the methods and materials used. The parameters and characteristics of each method, process and procedure also weak. the continuity of each of points hardly been seen. Focus of the proposal not highlighted well but when you reach to the methodology can be understood what the author would like to do. Need to enhance the literature parts to enhance the understanding of this proposal and later will help till end of this proposal. | https://drive.google.com/open?id=1ULc5ir7mIQU_tDhP8vYOX-KVn66YoGDl | |
51 | 48 | NUWAIR SYAKIR BIN NAZRIN | A19MJ5195 | NURSHAFINAZ BINTI MOHD MARUAI (DR.) | Strategies in harvesting wind energy from flow-induced vibration for IoT application. | Ok, but student needs to be able to relate his study to real world applications. | Good presentation. Well done. Just add END in your methodology. | The knowledge in vortex induced vibration still weak. Need more reading on related topic. | Please check the marked report and do necessary improvement | https://drive.google.com/open?id=1wmzKiCTKujS4y66A_ZNmmuIW9gkCTaz5 | The content is ok. However, format is not standardized. Please check UTM's report format and make sure to re-check the report before submission | https://drive.google.com/open?id=1lvwuDtzjqVvX9lshoFcFpc6SlFsncRKD | |
52 | 49 | RADHARAMANA A/L R.GANESAN | A19MJ0115 | PAUZIAH BT MUHAMAD (ASSOC. PROF. IR. DR.) | Advances in micro-and Nano bubbles technology for application in Algae plant growth | Student understands his project well, but needs to relate with real world applications. | Good presentation. | Good presentation, keep up the good work | Need to find more information and methods to integrate Ph solution to simulation parameters | https://drive.google.com/open?id=16FL1GgI_YEJoW1xu9fkEjGkbD4QBQfnK | please refer to the comment and do minor correction | https://drive.google.com/open?id=1zRBFIhgvX-k6oFHF-HzkyIj3y4RY38rc | |
53 | 50 | RAS ELISA HARZIE BINTI RAMAZIE FAZALY | A19MJ5170 | PAUZIAH BT MUHAMAD (ASSOC. PROF. IR. DR.) | Practical application of sunscreen packaging design for quality improvement of sustainable packaging | The student should be more creative in solving the problem identified. Do not be too restricted with typical design methods. | Good presentation and understand the topic well. | Good presentation, keep up the good work | Well written and all objectives can be achieved. However on the expected results must ensure the FEA on the static analysis is benchmarked to the real failure of the product packaging. Red areas of the most stress must found at the lid as customer complained, The references shall also follow the standard. | https://drive.google.com/open?id=1u71avt6o93MbjiML7oBsR-1Rf40bNvf8 | Please refer to the detailed comments in your report. | https://drive.google.com/open?id=1BqrygkTEW_7QS4lwpk_TGuEIyTZEwkDM | |
54 | 51 | SCHON CHRISTOPHER JEYARAJAH | A19MJ0151 | USWAH BINTI KHAIRUDDIN (DR.) | [Industry - Indah Water Research Centre] Modeling of Sequencing Batch Reactor Tank operation in Indah Water Sewage Treatment Plant | Student understands his project well. But he needs to be able to relate the outcome of his project in terms of contribution to Indah Water. | Good presentation. | He has been doing good work & progressing | Missing research significance. Citation style must be corrected. please refer to APA style citation | https://drive.google.com/open?id=1dIl6IwhdiZoxCJ1NeYQRigYt_kKQbfk2 | Please refer to the comment. Do correction based on comment given. | https://drive.google.com/open?id=1lILftJUgcMovSwfUcCIbochTslCGpD27 | |
55 | 52 | SHAHRUL AIMAN BIN SYED MOHAMED | A19MJ0122 | SHAHIR YASIN BIN MOHD YUSUF (DR.) | Design and Fabrication of a DIY Filament Extruder for 3D Printing Applications | very interesting presentation, nice ppt. | Good presentation slide. May be improved further by highlighting/including important points on the slide. | Student display a positive and good attitude towards his study. Improvement can be made in term of technical presentation. | Please refer to the marked report and make improvements. | https://drive.google.com/open?id=1ghe9M80OL_fQLuoBWeohJ3r0hLz_g70C | Title of the thesis should not have abbreviation | https://drive.google.com/open?id=1Ad7miC-NRuKub9E03tr6a4T2CURL1qEk | |
56 | 53 | SYUKRI BIN SELAMAT | A19MJ0227 | SAMSOL FAIZAL BIN ANIS (TS. DR.) | The influence of material properties on the fatigue crack interaction behaviour. | better present not to read text. nice ppt slide with diagram, | The presentation was monotonous, and the student just read the slide. Not able to explain in layman terms. | OVERALL ARE GOOD | Overall is okay. Need to add more references and refer to the comments given in the proposal. | https://drive.google.com/open?id=1hqENLO14dhgrjjphUHKjVSI7_yZ44lnj | The report is poorly written and not comprehensive to summarise the work done. | https://drive.google.com/open?id=1iL7ChWKGunJ8xy2tdMJ4l9ttaPNabA6m | |
57 | 54 | THANESWARAN A/L RAMALINGGAM | A19MJ0229 | HAFIZAL BIN YAHAYA (DR.) | Rainwater electric generator using 3D Printer | The student should improve his explanation on the project. | The presentation slide is nice and clear. Would be better if important points are highlighted. However, the presentation is not concise and the student did not finish the presentation accordingly. Important information is not further elaborated. | The student needs to prepare more research on their title but overall for now is suffice. | Overall the report is good put additional information related to material of 3D printing available and compare pros and cons | https://drive.google.com/open?id=1KUJsgN_tzTFzxggclL2SWYVvny_Huh0T | Problem statement can be improved by highlighting why need to use 3D prineter, what are the current issues? | https://drive.google.com/open?id=1moa4M-DriMh9BfXeWCE6NCtdqXoRi681 | |
58 | 55 | UMAR HAKIIM BIN KHAIRUDDIN | B20MJ5005 | SHEIKH AHMAD ZAKI BIN SHAIKH SALIM (ASSOC. PROF. DR.) | Thermal comfort assessment for mosque during prayer time. | Student not focus 100% to his FYP | review the objective. Include a complete flowchart, Gantt chart and methodology | This student show good performance | Please refer to the thesis. | https://drive.google.com/open?id=17kMlfJvxtKqcw4YXOuKqYwxWhy2sz_NR | Overall are good but please refer on PDf's file attached after reviewed. | https://drive.google.com/open?id=1-IdJgAU1GU2B_PYbvaW6dW8fazDlzy-r | |
59 | 56 | WAN EMILY SHAZELYN BINTI WAN MOHD ZABIDI | A19MJ5169 | MOHAMED SUKRI BIN MAT ALI (DR.) | Design Flare Stack for Petroleum Refinery | Student dont understand how to relate the Navier"s stoke equation with simulation | ok | The student has good attitude towards her work and can communicate well. | Has no Prelimanary results only the plan | https://drive.google.com/open?id=13xge8JDho-5_kDw8J9PLCIiN2o0PNtTJ | Generally is ok. Application to complex engineering case problems as well as using applications to modern tools | https://drive.google.com/open?id=1vBRgMo6t2YVoYixO6y8jWmNgx7r4AwIQ | |
60 | 57 | ZULFIKRI BIN ZAINAL AZLAN | A19MJ0136 | MOHAMAD FADZLI BIN HANIFF (DR.) | Activity Schedule Based Automatic Control for Air Conditioning System Towards Comfortable and Power Saving Operation. | Student cannot finish his presentation within time limitation given. Over than 10 minute. | students seem unprepared for the presentation | ok | please read the previous student report first before blindly copy the results | https://drive.google.com/open?id=1SPel-PPo9jtpp4LOmpJll-a6BkVaBi8N | Overall are good, please refer the PDF's file report as attached. | https://drive.google.com/open?id=1WrEFa85nqP5nImoS3p2JGAdfI8rHDhqO | |
61 | #N/A | #N/A | #N/A | #N/A | #N/A | #N/A | #N/A | ||||||
62 | #N/A | #N/A | #N/A | #N/A | #N/A | #N/A | #N/A | ||||||
63 | #N/A | #N/A | #N/A | #N/A | #N/A | #N/A | #N/A | ||||||
64 | #N/A | #N/A | #N/A | #N/A | #N/A | #N/A | #N/A | ||||||
65 | #N/A | #N/A | #N/A | #N/A | #N/A | #N/A | #N/A | ||||||
66 | #N/A | #N/A | #N/A | #N/A | #N/A | #N/A | #N/A | ||||||
67 | |||||||||||||
68 | |||||||||||||
69 | |||||||||||||
70 | |||||||||||||
71 | |||||||||||||
72 | |||||||||||||
73 | |||||||||||||
74 | |||||||||||||
75 | |||||||||||||
76 | |||||||||||||
77 | |||||||||||||
78 | |||||||||||||
79 | |||||||||||||
80 | |||||||||||||
81 | |||||||||||||
82 | |||||||||||||
83 | |||||||||||||
84 | |||||||||||||
85 | |||||||||||||
86 | |||||||||||||
87 | |||||||||||||
88 | |||||||||||||
89 | |||||||||||||
90 | |||||||||||||
91 | |||||||||||||
92 | |||||||||||||
93 | |||||||||||||
94 | |||||||||||||
95 | |||||||||||||
96 | |||||||||||||
97 | |||||||||||||
98 | |||||||||||||
99 | |||||||||||||
100 | |||||||||||||