Annex 1：DIY KIT 5w.xlsx

	B	C	D	E	F	G	H	I	J	K
1
2	Material Parameter Reference of AlgoLaser_DIY-KIT for 5W for LightBurn
3	Material	image	Speed (mm/min)	Max Power	Min Power	Line Interval	Image Mode	Test Results	Remark	Reference Picture(Parameter setting location)
4	Birch Plywood 桦木胶合板		5000	100%	0	0.05	Grayscale
5	Basswood Plywood 椴木胶合板		5000	100%	0	0.05	Grayscale
6	Eucalyptus plywood 桉木胶合板		5000	100%	0	0.05	Grayscale
7	Pine Board 松木板		5000	100%	0	0.05	Grayscale
8	Paulownia Plank 泡桐木板		5000	100%	0	0.05	Grayscale
9	MDF 中密度板		10000	100%	0	0.05	Grayscale
10	Black Acrylic 黑色亚克力		6000	100%	0	0.07	Grayscale
11	Green Acrylic 绿色亚克力		5000	100%	0	0.05	Grayscale
12	Orange Acrylic 橙色亚克力		5000	100%	0	0.05	Grayscale
13	Blue Acrylic 蓝色亚克力	/	/	/	/	/	/	/	Blue Light is Absorbed
14	Yellow Acrylic 黄色亚克力		5000	100%	0	0.05	Grayscale
15	Red Acrylic 红色亚克力		5000	100%	0	0.05	Grayscale
16	PolyVinyl Chloride (雪弗板)		10000	100%	0	0.07	Grayscale
17	Gray Cardboard 灰纸板		10000	100%	0	0.07	Grayscale
18	White Cardboard 白纸板		8000	100%	0	0.05	Grayscale
19	Black Cardboard 黑纸板		8000	100%	0	0.05	Grayscale
20	Coated Duplex Board (牛卡纸)		10000	100%	0	0.05	Grayscale
21	Leather 皮革		10000	100%	0	0.07	Grayscale
22	colored paper 彩纸		10000	100%	0	0.07	Grayscale
23	Navy Blue canvas 海军蓝色帆布		10000	100%	0	0.07	Grayscale
24	denim 牛仔裤		8000	100%	0	0.07	Grayscale
25	rubber 橡胶		8000	100%	0	0.07	Grayscale
26	white ABS sheet 白色ABS		/	/	/	/	/
27	black ABS sheet 黑色ABS		6000	100%	0	0.07	Grayscale
28	bamboo 竹子		10000	100%	0	0.07	Grayscale
29	Stainless steel 不锈钢		100	100%	0	0.05	Grayscale
30	cold rolled sheet 冷轧板		100	100%	0	0.05	Grayscale
31	coated metal 涂层金属		1000	100%	0	0.05	Grayscale
32	dry leaves 干树叶		10000	100%	0	0.07	Grayscale
33	clear acrylic 透明亚克力		Laser Color Paper
34	copper 铜		/	/	/	/	/	/
35	gold 金		/	/	/	/	/	/
36	Pure aluminum 纯铝		/	/	/	/	/	/
37	pure iron 纯铁		/	/	/	/	/	/
38
39
40
41	Notice： 1、The results would be different in even same material with different finishing or different colors, So you need to adjust the speed and power rate based on different objects. Also, please adjust the focal length to be the best, make the focal spot to be the smallest. 2、It couldn't engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or pervious to light, etc. Then, you need to use the marker pen to black it to engrave.
42
43
44
45
46
47
48
49	以上雕刻数据的测试是基于没有灰度过度的位图雕刻的，灰度图的雕刻值要根据实际情况自行调整
50	以上雕刻数据的测试是基于没有灰度过度的位图雕刻的，灰度图的雕刻值要根据实际情况自行调整
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100