Estimation-Software-for-Presure-Vessel.xls

	B	C	D	E	F	G	H	I	J	K	L	M
1
2
3	THK.CALC. ( ASME SEC. VIII DIV-1)
4				SHELL			PLATE( DISK )
5	PRESSURE	1690	Psi	ID	9,000.0	mm	OD	300	mm	Ft		0
6	DIAMETER	2,200	mm	THK	5.0	mm	THK	10	mm	Inch		13
7	RADIUS	1,100	mm	L(T/T)	7,200.0	mm	QTY	1	Nos.	Inch		15/16
8	ALL. STRESS	1,870	Psi	L(S/S)	7,200.0	mm	W T.	5.55	Kgs.	mm		354.01
9	J.EFFICIENCY	1.00	%	OD	9,010.0	mm	T WT.	5.55	Kgs.
10	CORR.ALL	3.0	mm	B.D(Dsh+h)	11,007.8	mm	PLATE			PRESS. Conversion
11	THK calc-shell	2177.65	mm	shell circum.	28,290		THK	10	mm	44	PSI	3
12	THK CODE	2177.65	mm	WT. (1-Dsh)	3,735.4	Kgs.	W	40	mm	92	Kg / cm2	1,308
13	THK corr. allow.	2180.65	mm	WT. (2-Dsh)	7,470.7	Kgs.	L	14,200	mm	15.0	BAR	218
14	THK adapted	2,181	mm	WT.Sh.(S/S)	7,994.8	Kgs.	QTY	3	Nos.	2,117	PSI	146.0
15	THK calc-headsl	1216.76	mm	TOTAL WT.	15,465.5	Kgs.	W T.(Kgs)	44.59	Kgs.
16	THK CODE	1216.76	mm	TUBE			T W.(Kgs)	133.76	Kgs.
17	THK corr. allow.	1219.76		OD	135.00
18	THK adapted	1,220		THK	2.11
19	O.D	6,562		ID	130.78		RADIOGRAPHY		2 M,LENGTH	8 M,LENGTH
20	O.A LENGTH	11,519		L	6,096		VES. DIA	3,000	6.3	0.90
21				QTY.	851
22							VES. LNGTH	5,400	7	2	NO. OF PLATES
23	S K I R T			WT	35,873.09		PL.WIDTH	1500	37.8	18.8	NO. OF WELDS
24	ID	1,350	mm				PL.LNGTH	6000		18.8	LENGTH
25	THK	8	mm	RING			SKRT REQ.	N		56.6	T.LENGTH
26	L	4,500	mm	OD	135.00	mm	CIRCUM.	9,425
27	OD	1,366	mm	THK	10.00	mm		RADIOGRAPHY (FULL)	57	METERS
28	WT.SHELL	1,206	Kgs.	ID	96	mm		RADIOGRAPHY (SPOT)	6	METERS
29				QTY.	1	Nos.	SPOT RADIOGRAPHY: AFTER EVERY 15' FOR A
30	SKIRTS' COMP. RING			WT. / RING	0.6	Kgs.	LENGTH OF 6"
31	ID	1,366	mm	T. WT.	0.6		CLIPS	1.1
32	THK	16	mm	VESSEL SUR. AREA		0.56	D	1,800	5,655	19
33	OD	1,566	mm	ID	3,000	mm	L	3,500	3,500	12
34	WT.	58	Kgs.	TH	5	mm	DIST:	300
35				L	5,400	mm	IN/OUT/BOTH	I	NOs.CLIPS	220
36	SKIRTS' BASE PLATE			B.D	3,741	mm			T.WT.(Kg)	37
37	ID	1,266	mm	QTY.=	2	Nos.
38	THK	8	mm	D.E. AREA =	22	M²	FOR CONES		DATA		Calc. Factors
39	OD	1,516	mm	SHELL AREA =	52.00	M²	D (mm) =		1000	S1 =	3141.593
40	WT.	34	Kgs.	T.AREA =	74	M²	d (mm) =		500	S2 =	1570.796
41							H (mm) =		150	h =	291.548
42	T.WT.SKIRT			Wo	2000		T(mm) =		12.7	A =	1.030
43	1,298			Dn	3.6		OUT PUT			R =	583.095
44	DIA	435		Ln	10					B =	5.388
45	THK	10		Th-n	10		Length (mm) =		505	x =	252.418
46	ST. FLNG	50		Do	2.5		Width (mm) =		846	r =	291.548
47	TOT. H. DISH	169		Lo	15		WT (Kgs.)		42.6	y =	-262.814
48				Th-o	12
49	THK.CALC. ( BS-1500 CODE)			FAC.	1.152			RING-1		RING-2
50				Wn	2,304.00			OD	1,315.00	OD	431.80
51								THK	172	THK	38.10
52	p =		250	lb/in²	BD FOR TORISPHERICAL DISH			ID	951	ID	951
53	Di =		5,000	mm	ID	2,580	mm	QTY.	1	QTY.	1
54	Do =		5080	mm	T	13	mm	WT./ RING	874.7	WT./ RING	(168.6)
55	f ,STRESS =		17700	lb/in²	Q	0.46	Radians	T. WT.	874.7	T. WT.	(168.6)
56	j (J. Eff.) =		0.95	%	R	2,580	mm	HOLES	1,826.00
57	c (c.a.) =		1.6	mm	r	258	mm	OD	32	mm	TOTAL WT
58	CALC. THK. =		37.45	mm	SF	50	mm	THK	172	mm	680
59	THK.+ C.A =		39.05	mm	BD =	3,070	mm	QTY	24	Nos.
60	THK. ADOPTED =		40	mm				W T.	1.07	Kgs.
61								T WT.	25.66	Kgs.
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76		tube hole dia		1.518	38.56
77		under tolerance		0.007	0.18
78		over tolerance (96 %)		0.003	0.08
79		over tolerance (4 %)		0.01	0.25
80
81		shell dia		857	mm
82				33.74	inch
83
84		baffle diastance		1220	mm
85				48.03	inch
86		baffle hole = tube OD +		0.03125	inch
87				0.79	mm
88		tube dia		38.10	mm
89		baffle hole		38.89	mm
90
91
92
93
94
95
96
97
98
99
100