FEB_Holder_BOM

	A	B	C	D	E	F	G	H	I	J	K	L
1	Item	Description	Vendor	ID	#/box	Unit Cost	Quantity Needed	Total Cost	Link	Ordered	Received	Comments
2	T-slotted framing	Single Rail, Silver, 1" High x 1" Wide, Solid	McMaster-Carr	47065T101	1	$19.79/6ft	12ft	$39.58	https://www.mcmaster.com/#47065t101/=17ywiv7	N		Have enough in machine shop
3	Corner Bracket	Corner Bracket for 1" High Single Rail, Silver	McMaster-Carr	47065T236	1	$5.79	8	$46.32	https://www.mcmaster.com/#47065t239/=17ywj26	N		Maybe switch to smaller brackets depending on prototype
4	Fastening Screws	18-8 Stainless Steel Hex Drive Rounded Head Screw, 1/4"-20 Thread Size, 1/2" Long	McMaster-Carr	92949A537	50	$4.67	52	$9.34	https://www.mcmaster.com/#92949a537/=17ywj81	N		Already have in machine shop
5	Fastening Nuts	1/4-20 Slide-in Economy T-Nut - Centered Thread	80/20	3382	1	$0.21	56	$11.76	https://8020.net/shop/3382.html	N		Already have in machine shop
6	Handles	Round-Grip Pull Handle with Threaded Holes, Aluminum, Dull Anodized Finish, 4" Center-to-Center, 1-7/8" Projection	McMaster-Carr	1568A140	1	$7.66	2	$15.32	https://www.mcmaster.com/#1568a14/=17ywjj4	Y	Y
7	Handle Screws	18-8 Stainless Steel Hex Drive Rounded Head Screws, Black-Oxide, 10-32 Thread Size, 3/4" Long	McMaster-Carr	91306A358	50	$6.52	4	$6.52	https://www.mcmaster.com/#97763a341/=1894h5t	Y	Y
8	Shoulder Screws	18-8 Stainless Steel Precision Shoulder Screw, 1/4" Diameter 1/4" Long Shoulder, 10-32 Thread	McMaster-Carr	91259A171	1	$1.98	8	$15.84	https://www.mcmaster.com/#91259a171/=18hbsdu	Y	Y
9	Lanyard and Tab	Galvanized Steel Wire Rope Lanyard - Not for Lifting, Loop-to-Tab, 3/64" Rope Diameter, 6" Long	McMaster-Carr	90312A304	1	$2.43	4	$9.72	https://www.mcmaster.com/#90312a304/=17ywjzb	Y	Y
10	Quick-Release Pin	18-8 Stainless Steel Ring-Grip Quick-Release Pin, 1/4" Diameter, 5/8" Usable Length	McMaster-Carr	98404A126	1	$1.92	4	$7.68	https://www.mcmaster.com/#98404a126/=17ywkdc	Y	Y
11	Feet	Rubber Bumper with Unthreaded Hole, Heavy Duty, SBR with Stainless Steel Washer, 1.5" OD, 3/4" High, 1/4" Hole Diameter	McMaster-Carr	9540K28	10	$8.84	4	$3.54	https://www.mcmaster.com/#9540k28/=17ywkia	Y	Y
12	Feet Screws	18-8 Stainless Steel Hex Drive Rounded Head Screws, Black-Oxide, 1/4"-20 Thread Size, 5/8" Long	McMaster-Carr	91255A539	50	$5.38	4	$5.38	https://www.mcmaster.com/#97763a264/=1894idz	Y	Y
13	FEB Holding Slotted Boards	Cut From: White Delrin® Acetal Resin Sheet, 3/8" Thick, 12" x 24"	McMaster-Carr	8573K37	1	$66.67	2	$133.34	https://www.mcmaster.com/#8573k37/=17ywkuy	Y	1/2
14	Constraint Slotted Boards	Cut From: 6061 Aluminum, 1/8" Thick x 1-1/2" Wide	McMaster-Carr	8975K581	1	$8.41/6ft	6ft	$8.41	https://www.mcmaster.com/#8975k581/=17ywl0f	Y	1/2
15	Shoulder Screw Fasteners	10 Series 10-32 Standard Slide-in T-Nut	80/20	3205	1	$0.79	8	$6.32	https://8020.net/shop/3205.html	Y
16	Lanyard Fastening Screws	18-8 Stainless Steel Hex Drive Rounded Head Screw, 12-24 Thread Size, 1/2" Long	McMaster-Carr	92949A340	5	$4.23	8	$8.46	https://www.mcmaster.com/#92949a340/=18d882y	N		Have in machine shop
17	Washers for Shoulder Screws	Nylon Plastic Washer, for 1/4" Screw Size, 0.312" ID, 0.5" OD	McMaster-Carr	95606A430	100	$6.76	8-16	$6.76	https://www.mcmaster.com/#95606a430/=18hbw5z	Y	Y
18	Total Cost							$334.29
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100