ABCDEFGHIJKLMNOPQRSTUVWXYZAA
1
Hello!
2
This document contains measured hashrates of various GPUs mining the various algorithms.
3
Each algorithm gets its own sheet as you cannot compare hashrates from different algorithms directly.
4
It is assumed old cards can be bought used so old generations come down the list.
5
DO NOT PUT DATA HERE!
6
Look below. Each algo has its own performance sheet.
7
8
GF 650 Ti
9
In theory cards should be ranked by chip type but this information is very often not readily available to users so we identify the type of card instead, its "family".
10
As a result, values here should be "GeForce 750 Ti", "Radeon 7800", "R9-280"... Be careful, GeForce 750 Ti is very different thing from GF 750 GTX
11
If unsure, leave blank and specify model instead.
12
13
asus
14
Brand of the card, producer.
15
16
Windforce 3
17
Everything else required to identify the specific card being used. If you can, put here the vendor code.
18
Otherwise, put here a descriptive name of card's features such as "Windforce 3", "DirectCU II", "Vapor-X"...
19
Please make sure this is sufficient to uniquely identify your card!
20
21
1100, 1250
22
Clock rate in MegaHertz.
23
Write here the clock being used, not the clock rate written on the box. So if your card runs at 1000 (written on the box)
24
but you overclock it to 1050, write 1050 here.
25
Do not specify clocks by miner parameters!
26
For the memory, always write the data transfer clock (not the real clockrate) so GDDR5 can be easily distinguished from GDDR3.
27
as the latter former usually has at least twice the data transfer.
28
Note you don't need to write the type of memory, nor its amount. Those things are often known from the previous fields but
29
if you feel like it, add them to notes.
30
31
OS, driver, miner
32
OS is easy.
33
Most miners also put out a version on top left corner. Write it there. Please mark builds from source or custom / modded versions.
34
Driver is a bit more involved as it depends on vendor.
35
36
(Watts)
37
Very seldom provided, put it in notes instead!
38
Consumption measured at the wall, for the whole system!
39
This is NOT card TDP it will often be slightly higher due to other system components and power supply efficiency.
40
41
Hashrate
42
Please be coherent with the others in units of measurements.
43
Try to avoid decimals. If miner pulls out numbers such as "1.12M", please mark 1120.
44
45
Notes
46
Fully up to you.
47
Miner intensity and worksize are two very common parameters. Instead of writing them fully, just write i<yourIntensity>w<yourWorkSize>.
48
You can also use xi or ri for linear multiplicative instensity or raw intensity.
49
Note "thread concurrency" and "lookup gap" are only used by scrypt. Please do NOT report for other algos.
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100