A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | AA | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | LAUNCH X431 | PIWIS | |||||||||||||||||||||||||
2 | Front End Electronics | BCM vorne | Value | Related | Description | ||||||||||||||||||||||
3 | WWS Coding | WWS-Codierung | |||||||||||||||||||||||||
4 | WWS-coding-Teardrop Function active | WWS-Codierung Traenenfunktion aktiv | Yes | Enable automatic delayed extra wipe to clean windshield | |||||||||||||||||||||||
5 | |||||||||||||||||||||||||||
6 | Coding | ||||||||||||||||||||||||||
7 | Coding_0 | ||||||||||||||||||||||||||
8 | Coding-Comfort functions-Window comfort opening | Yes | Enable automatic window roll down by pressing and holding unlock on keyfob | ||||||||||||||||||||||||
9 | Coding-Comfort functions-Window comfort closing | Yes | Enable automatic window roll up by pressing and holding lock on keyfob | ||||||||||||||||||||||||
10 | Coding-Comfort functions-Roof system comfort opening | Yes | Enable automatic sunroof open by pressing and holding unlock on keyfob | ||||||||||||||||||||||||
11 | Coding-Comfort functions-Roof system comfort closing | Yes | Enable automatic sunroof closing by pressing and holding unlock on keyfob | ||||||||||||||||||||||||
12 | Exterior lighting DRL with marker light | Außenbeleuchtung TFL mit Begrenzunglicht | Yes | Enable DRL with Markers On | |||||||||||||||||||||||
13 | Coding-Exterior lighting-DDL Specification | No | Disable DRL with Light Switch Off | ||||||||||||||||||||||||
14 | Coding-Exterior lighting-Exterior lighting: SML flashes in sync | Aussenbeleuchtung SML mitblinkend | Yes | Enable side marker blinker with turn signal | |||||||||||||||||||||||
15 | Coding-General-Acoustic feedback for locking | Yes | Enable acoustic feedback on locking (No disables lock chirp) | ||||||||||||||||||||||||
16 | Exterior lights parameters-One Touch flashing cycles | Number | Change number of One Touch Flashing Cycles (Default 3) | ||||||||||||||||||||||||
17 | |||||||||||||||||||||||||||
18 | Extended Codings | ||||||||||||||||||||||||||
19 | Extended codings-FLA codings-High beam assistant (FLA) present | Yes | Enable High Beam Assist | ||||||||||||||||||||||||
20 | Rear End Electronics | BCM ruck | Value | Related | Description | ||||||||||||||||||||||
21 | Codiertabelle | ||||||||||||||||||||||||||
22 | Exterior lighting | ||||||||||||||||||||||||||
23 | Exterior Lights, DD lights as marker light | Yes | Enable DRL 4-Point LED's when headlights on | ||||||||||||||||||||||||
24 | Exterior lights parameters | ||||||||||||||||||||||||||
25 | Dimming value for DD lights as marker light | 100 | Dimming value, set to 100 for full intensity | ||||||||||||||||||||||||
26 | Instrument Cluster | Kombiinstrument | Value | Related | Description | ||||||||||||||||||||||
27 | Extended codings | ||||||||||||||||||||||||||
28 | Extended codings_0 | ||||||||||||||||||||||||||
29 | Extended codings-Max. boost pressure | Weitere Codierungen: Max. Ladedruck | 1.66 | BAR | Raise max boost gauge reading to 24PSI (for aftermarket tunes) | ||||||||||||||||||||||
30 | Extended codings-Sport boost pressure | Weitere Codierungen: Ladedruck Sport | 1.66 | BAR | Raise max boost gauge reading to 24PSI (for aftermarket tunes) | ||||||||||||||||||||||
31 | |||||||||||||||||||||||||||
32 | Board computer display configuration key 1_0 | ||||||||||||||||||||||||||
33 | BC Configuration byte 8-Door unlocking setting | On | Enables the unlocking of all doors with single press of keyfob | ||||||||||||||||||||||||
34 | BC Configuration byte 9-locking-mirror fold-in | On | Auto fold mirrors when doors locked (requires additional coding) | ||||||||||||||||||||||||
35 | BC Configuration byte 10-locking relocking time, after door unlocking | 30 | Change delay for the auto door re-lock if you unlock and don't open a door (Max 90) | ||||||||||||||||||||||||
36 | Board computer display configuration key 1_1 | Bordcomputer Menukonfiguration | |||||||||||||||||||||||||
37 | BC Configuration byte 4-Eco upshift display | Shutdown | DIsables the upshift triangle in manual PDK modes | ||||||||||||||||||||||||
38 | BC Configuration byte 4-BC Role G-Force | Performance-Anzeige -> aktiv | On | Enable the G-Force menu (requires additional coding) | |||||||||||||||||||||||
39 | BC Configuration byte 13-high beam assistant | On | Enable High Beam Assist | ||||||||||||||||||||||||
40 | BC Configuration byte 13-Performance Display | Performance-Anzeige -> aktiv | On | Enable HP & Torque menu (requires additional coding) | |||||||||||||||||||||||
41 | BC Configuration byte 22-BC Role Performance Display | On | Enable HP & Torque menu (requires additional coding) | ||||||||||||||||||||||||
42 | |||||||||||||||||||||||||||
43 | Board computer display configuration key 2_1 | ||||||||||||||||||||||||||
44 | BC configuration byte 13 - high beam assistant | On | Enable High Beam Assist | ||||||||||||||||||||||||
45 | Board computer display configuration key 3_1 | ||||||||||||||||||||||||||
46 | BC configuration byte 13 - high beam assistant | On | Enable High Beam Assist | ||||||||||||||||||||||||
47 | Board computer display configuration key 4_1 | ||||||||||||||||||||||||||
48 | BC configuration byte 13 - high beam assistant | On | Enable High Beam Assist | ||||||||||||||||||||||||
49 | |||||||||||||||||||||||||||
50 | Board computer display configuration factory setting | ||||||||||||||||||||||||||
51 | BC configuration byte 13 - high beam assistant | On | Enable High Beam Assist | ||||||||||||||||||||||||
52 | |||||||||||||||||||||||||||
53 | Board computer menu configuration | Bordcomputer Menukonfiguration | |||||||||||||||||||||||||
54 | Board computer menu configuration_0 | ||||||||||||||||||||||||||
55 | Board computer menu configuration byte 0-boost pressure (bargraph) | Yes | Enable Boost Pressure Bargraph in Vehicle Menu | ||||||||||||||||||||||||
56 | Board computer menu configuration byte 2-mirror fold-in | Byte 2 Siegel einklappen -> aktiv | Yes | Auto fold mirrors when doors locked (requires additional coding) | |||||||||||||||||||||||
57 | Board computer menu configuration byte 4-expert menu | Yes | Enable the Expert menu (readout of engine sensors & running values) | ||||||||||||||||||||||||
58 | Board computer menu configuration byte 4-G-Force | Byte 4 G-Force -> aktiv | Yes | Enable the G-Force menu (requires additional coding) | |||||||||||||||||||||||
59 | Board computer menu configuration byte 7-Performance Display | Auswahl Performance-Anziege -> aktiv | Yes | Enable HP & Torque menu (requires additional coding) | |||||||||||||||||||||||
60 | |||||||||||||||||||||||||||
61 | Board computer menu configuration 2_1 | ||||||||||||||||||||||||||
62 | Board computer menu configuration 2 byte 2-Joker Sport | Yes | Enable Sport Mode activation with Diamond button | ||||||||||||||||||||||||
63 | Board computer menu configuration 2 byte 2-Joker Sport exhaust | Yes | Enable Sport Exhaust activation with Diamond button | ||||||||||||||||||||||||
64 | Board computer menu configuration 2 byte 0-high beam assistant | Actuated | Enable High Beam Assist | ||||||||||||||||||||||||
65 | |||||||||||||||||||||||||||
66 | Warning lamps | ||||||||||||||||||||||||||
67 | indicator lamps coding-High beam assistant | On | Enable High Beam Assist | ||||||||||||||||||||||||
68 | |||||||||||||||||||||||||||
69 | Dimming-general configuration | Dimmung - allegemeine Konfiguration | |||||||||||||||||||||||||
70 | Configuration-All dials white | Konfiguration zentrales Zifferblatt Weiss | Yes | Code 1st | Enable backlight on RPM dial (value may also be Not Running) | ||||||||||||||||||||||
71 | Konfiguration alle Zifferblatter Weiss | Yes | Code 2nd | Enable backlight on Speedometer dial (value may also be Not Running) - only if RPM dial enabled | |||||||||||||||||||||||
72 | |||||||||||||||||||||||||||
73 | Kodierwert | ||||||||||||||||||||||||||
74 | Kodierwert-Coding byte 2-Driver seatbelt warning | Deactivated | Disable seatbelt warning (Driver) | ||||||||||||||||||||||||
75 | Kodierwert-Coding byte 2-Passenger seatbelt warning | Deactivated | Disable seatbelt warning (Passenger) | ||||||||||||||||||||||||
76 | Kodierwert-Coding byte 2-USA seatbelt warning | Deactivated | Disable seatbelt warning LED | ||||||||||||||||||||||||
77 | Kodierwert-Coding byte 2-Acoustic seatbelt warning | Deactivated | Disable seatbelt warning Chime | ||||||||||||||||||||||||
78 | |||||||||||||||||||||||||||
79 | PCM | HeadUnit | Value | Related | Description | ||||||||||||||||||||||
80 | Coding value | ||||||||||||||||||||||||||
81 | Coding value_1 | ||||||||||||||||||||||||||
82 | VW Coding Value Textual-Bit field (4)-byte_23_Initial Disclaimer | Off | For older models with PCM3, disable initial disclaimer | ||||||||||||||||||||||||
83 | VW Coding Value Textual-Bit field (4)-byte_23_Legal Disclaimer | Off | For older models with PCM3, disable navigation disclaimer | ||||||||||||||||||||||||
84 | PCM/CDR Automatic mirror fold in function | Yes | Add Mirror Retract in PCM 3.1 | ||||||||||||||||||||||||
85 | PCM/CDR Handset settings - Ring tone volume | % | Adjust ring volume from Default 50% | ||||||||||||||||||||||||
86 | Driver-side Seat Memory | Value | Related | Description | |||||||||||||||||||||||
87 | Comfort Entry/Exit adjustment travel-E/A adjustment travel in | Number | Changes distance seat moves back in mm from driving position on entry. Default is "26", I made it "40". | ||||||||||||||||||||||||
88 | seat fore/aft adjustment | ||||||||||||||||||||||||||
89 | |||||||||||||||||||||||||||
90 | Rear Lid | Heckdeckel | Value | Related | Description | ||||||||||||||||||||||
91 | System selection REAR LID, for both open and close | Additional Options (F8) -> Change ms value to 0 | Deactivated | Disable Hatch/Trunk open and close beeps | |||||||||||||||||||||||
92 | Set FFB,ST,FIT,HKIT to INACTIVE | ||||||||||||||||||||||||||
93 | |||||||||||||||||||||||||||
94 | Front Camera | Value | Related | Description | |||||||||||||||||||||||
95 | Coding | Kodierwert | |||||||||||||||||||||||||
96 | Coding value-Lighting assistant coding | Bank 2-AFS_coding_Light_Assist | HBA | Enable High Beam Assist | |||||||||||||||||||||||
97 | lower_speed_threshold_for_main_beam_on | lower_speed_threshold_for_main_beam_on | # in kph | Set lower speed for HBA high beam on, should be higher than the "off" speed | |||||||||||||||||||||||
98 | lower_speed_threshold_for_main_beam_off | lower_speed_threshold_for_main_beam_off | # in kph | Set lower speed for HBA high beam off, should be lower than the "on" speed | |||||||||||||||||||||||
99 | |||||||||||||||||||||||||||
100 |