Mill-Max Hotswap Keyboard Switch Compatibility (0305 and 7305)

	A	B	C	D	E	F
1	Switch	Works?	Difficulty	Contributor	Notes	See something wrong or want me to test another switch? DM me on discord: keybonbon#0001
2	Matias Quiet Click	No		u/tonsoffun49		My recommendation is stay away from "Difficult" and "VERY DIFFICULT" (but see notes below table)
3	Linjar	Yes	VERY DIFFICULT	MegaLadysman1234	might need to sand down the thicker pin
4	Kailh BOX Red	Yes	VERY DIFFICULT
5	Novelias	Yes	VERY DIFFICULT
6	Kailh BOX Burnt Orange	Yes	VERY DIFFICULT
7	Kailh BOX Royal	Yes	VERY DIFFICULT
8	NK Sherbet	Yes	VERY DIFFICULT
9	Kailh BOX Jade	Yes	VERY DIFFICULT
10	Creams	Yes	Difficult
11	Gateron Yellow Ink	Yes	Difficult
12	Zilent	Yes	Difficult
13	Zealios V2	Yes	Difficult
14	Kailh BOX White	Yes	Medium	berlinerbolle	work fine, a bit tight maybe - but once exact alignment is ensured, they go in without issue
15	Clickiez	Yes	Low	micke#3778
16	Midnight Jades	Yes	Low	spuddy	fit in 0305 sockets without difficulty
17	Tealios	Yes	Low
18	Silent Alpacas	Yes	Low
19	Tangerines V1	Yes	Low
20	Gateron Yellow (milky bottom)	Yes	Low
21	Cherry Black	Yes	Low
22	Gateron Brown	Yes	Low
23	Holy Panda	Yes	Low
24	NK Blueberry	Yes	Low
25	H1	Yes	Low
26	Alpacas	Yes	Low
27	Halo Clear	Yes	Low
28	Zealios V1	Yes	Low
29	Roselios / Sakurios	Yes	Low
30	Healios	Yes	Low
31	MOD-L	Yes	Low
32	Gateron Black Ink	Yes	Low
33	Tangerines V2	Yes	Low
34	Lilacs	Yes	Low
35	Oreos	Yes	Low
36	Cherry Clear	Yes	Low
37	Outemu Blue	Yes	Low
38	Cherry Blue	Yes	Low
39	Mauves	Yes	Low
40	Koala	Yes	Low
41	T1	Yes	Low
42	Gateron N1	Yes	Low
43	Gazzew Boba U4t	Yes	Low	berlinerbolle	maybe even too loose
44
45						Note from u/tonsoffun49 (he runs Mill-Max GBs on r/mechmarket) : I will also add that the only thing I suggest to do differently when using the sockets with the "Difficult" and "Very Difficult" switches is to put the sockets on the pins before inserting the switch and soldering. If the socket is requiring more force than normal, then you can slightly rotate the socket and try again. For me this has always worked and allowed me to install the socket without a ton of force which may help minimize the loss of friction in the socket. I will also add that I've used pretty much only switches from your "Difficult" and "Very Difficult" lists and have not noticed any long term issues with removing and mounting them. Great job doing the leg work on this though.
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100