ABCDE
1
Total:$1,884.50
2
3
ItemCostnotesLinkCost Percentage
4
Uplift L desk frame$823.00Got the metalic frame as it was the only one in stock. Upgraded to the memory controller and found a $25 off coupon.https://www.upliftdesk.com/uplift-v2-l-shaped-standing-desk-frame/43.67%
5
Main Butcher Block$244.00https://www.homedepot.com/p/Hardwood-Reflections-6-ft-2-in-L-x-3-ft-3-in-D-x-1-5-in-T-Island-Butcher-Block-Countertop-in-Unfinished-Birch-BBCT1502574/30068869523.51%
6
Side Butcher Block$199.00https://www.homedepot.com/p/Hardwood-Reflections-8-ft-2-in-L-x-2-ft-1-in-D-x-1-5-in-T-Butcher-Block-Countertop-in-Unfinished-Birch-BBCT1502598/300688697
7
Satin Water-Based Polyurethane$48.98needed more that 2 quarts so got a full gallonhttps://www.homedepot.com/p/Varathane-1-gal-Clear-Satin-Water-Based-Interior-Polyurethane-200231/10017620332.82%
8
Woodcare Sanding Sealer$16.27bought one quart but can't find linkhttps://www.homedepot.com/p/Varathane-1-qt-Woodcare-Sanding-Sealer-2-Pack-340444/305627162
9
foam brushes$5.97Using foam brushes to try and get a smoother top as it seems like normal ones leave light lines in the finishhttps://www.homedepot.com/p/1-in-2-in-and-3-in-Chiseled-Foam-Paint-Brush-Set-9-Pack-A-8509/100128205
10
foam brushes$2.91got some extra 3" brusheshttps://www.homedepot.com/p/3-in-Chiseled-Foam-Paint-Brush-8500-3/100670983
11
drop clothes$4.98Doing this on a deck so don't want much dust falling down to my neighbors. If you're doing this outside it might not be as important.https://www.homedepot.com/p/HDX-9-ft-x-12-ft-0-7-mil-Drop-Cloth-3-Pack-DCHD-07-3/204711646
12
tack cloth$21.00picked up enough to have one after each sandinghttps://www.homedepot.com/p/HDX-18-in-x-36-in-Tack-Cloths-3-Pack-HDTC-3PK/300242008
13
400 grit sandpaper$4.98For hand finishing between coatshttps://www.homedepot.com/p/3M-Pro-Grade-Precision-9-in-x-11-in-400-Grit-X-Fine-Advanced-Sanding-Sheets-4-Pack-26400PGP-4/205415931
14
120/240 grit sandpaperhadFor first sanding and sanding sealer. You may want a powered sander for this.your choice for your sander
15
1/4-20 30mm inserts$26.73Only need some of the 100. The 30mm ones are oddly cheaper than any other sizehttps://www.rampa.com/ca/en/hardwood/280-inserts-type-sk.html#/6-technical_approval-_/7-100_control-_/10-packaging_unit-100/15-material_coating-steel_zinc_plated/102-drive-with_hex_socket_with_thread/103-type-type_sk/2626-hole_spacing-_/2627-head_diameter-_/2629-usable_thread-_/2630-socket_length-_/2631-shank_mount-_/2632-version-_/2633-torque_range-_/2634-speed_range-_/2635-coverage-_/20-length-30/37-diameter-12/2908-wrench_size-6/60-thread-1_4_20_unc
16
1/4-20 1.25" Bolts$16.43They're longer than the inserts but it's okay since the washers and frame take up some spacehttps://www.amazon.com/gp/product/B078124BFB
17
1/4 washers.$6.29Replacements for the smaller oneshttps://www.amazon.com/gp/product/B07KQ198NP
18
rubber washers$8.33Keeping the slight isolation as the frame was designed with it.https://www.amazon.com/gp/product/B07KCY6Y8H
19
Wood Fill$14.38Used for filling in the knots on the bottom of the desk and the gap in one of the joints. 32oz is way more than needed even for my desk.https://www.homedepot.com/p/DAP-Plastic-Wood-X-32-oz-All-Purpose-Wood-Filler-00543/206667347
20
Extra Leg385
21
22
Tax$56.25Tax just on home depot purchases
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100