ABCDEFGHIJKLMNOPQRSTUVWXYZAA
1
The 15th Thailand Metallurgy Conference (TMETC-15)
2
The 5th International Thailand Corrosion Prevention and Control Conference (TCPC2025)
3
20-21 November 2025 at BITEC Bangkok, THAILAND
4
5
Technical Program
6
7
DAY IThursday, 20 November 2025
8
RoomSilk 1-4
9
08:00 - 09:00Registration
10
09:00 - 09:05Welcome Address
Mrs. Varaporn Dhamcharee
Managing Director of RX BITEC
11
09:05 - 09:10Welcome Address
Assoc. Prof. Dr. Toemsak Srikhirin
Executive Director of National Metal and Materials Technology Center (MTEC),
National Science and Technology Development Agency (NSTDA)
12
09:10 - 09:20Welcome Address
Mr. Li Chuanying
Deputy Director of China-Thailand "Belt&Road" Joint laboratory on Rail transport
CRRC Qingdao Sifang Co., Ltd.
13
09:20 - 09:30Welcome Address
Prof. Dr. Yuttanant Boonyongmaneerat
Director of Metallurgy and Materials Science Research Institute (MMRI), Chulalongkorn University
14
09:30 - 09:40Opening Remarks
Prof. Dr. Sukit Limpijumnong
President of National Science and Technology Development Agency (NSTDA)
15
09:40 - 09:45Group Photo
16
09:45 - 09:55Presenting Thailand Metallurgist and Young Metallurgist Awards
Asst. Prof. Suvanchai Pongsugitwat
Head of the Department of Metallurgical Engineering, Facutly of Engineering, Chulalongkorn University
17
09:55 - 10:05Presenting recognition souvenirs to TMETC-15 & TCPC2025 sponsorships
Dr. Ekkarut Viyanit
President of Thai Corrosion of Metals and Materials Association
Principal Researcher of Rail and Modern Transports Research Group,
National Metal and Materials Technology Center (MTEC), National Science and Technology Development Agency (NSTDA)
18
10:05 - 10:10Group Photo
19
Session ChairDr. Ekkarut Viyanit, National Metal and Materials Technology Center
20
10:10 - 10:40Plenary Lecture 1 (PL-01):
Bridging Science and Industry: Data-Driven Strategies for Reliable Operation in High-Corrosivity Environments
Dr. Matina Thammachart
Specialist, Corrosion and Manager, Materials and Corrosion Section, Facility Engineering Department, Engineering Technical Solutions Division
PTT Exploration and Production Public Company Limited
21
10:40 - 11:00Networking & Coffee Break
22
Session ChairDr. Anchalee Manonukul, National Metal and Materials Technology Center
23
11:00 - 11:30Plenary Lecture 2 (PL-02):
Roles of the Metallurgist in Impacting Industries: from atomic diffusion kinetics to structural analysis, from pico-liter soldering to micro-liter additive laser manufacturing, from jewelry investment casting to Tesla giga-casting, and from thermodynamic simulations to AI- and machine learning driven alloy formulation and implants design
Assoc. Prof. Dr. Boonrat Lohwongwatana
Thailand Metallurgist (TMETC-14)
Department of Metallurgical Engineering, Faculty of Engineering, Chulalongkorn University
24
11:30 - 12:00Plenary Lecture 3 (PL-03):
Advanced Electroplating Solutions for New Energy Applications
Asst. Prof. Dr. Jiaqian Qin
Young Metallurgist (TMETC-14)
Department of Materials Science, Faculty of Science, Chulalongkorn University
25
12:00 - 13:30Lunch
26
RoomSilk 1Silk 2Silk 3Silk 4
27
SessionEnergy Industry IInfrastructure & Construction IManufacturing & Process Industries IManufacturing & Process Industries II
28
Session ChairDr. Amnuaysak Chianpairot, National Metal and Materials Technology CenterDr. Pinai Mungsantisuk, Thai Marine Protection Co., Ltd.Dr. Anchalee Manonukul, National Metal and Materials Technology CenterAssoc. Prof. Dr. Patama Visuttipitukul, Chulalongkorn Univerysity
29
13:30 - 13:50Keynote Lecture 1:

Localized Creep Investigation at the Xylene Rerun Column Reboiler

Pranpath Narupantawart
Thai Oil Public Company Limited		Keynote Lecture 2:

Managing corrosion & plant ageing management

Dr. Pongpat Lortrakul
Rayong Engineering and Plant Service Company (REPCO NEX)		Keynote Lecture 3:

Advances in Industrial Shot Peening: In-Line Evaluation and Residual Stress Optimisation for Enhanced Fatigue Life

Dr. Yuji Kobayashi
SINTOKOGIO, LTD., Japan		Keynote Lecture 4:

Multi-scale Assessment and Prediction of Metal corrosion - Introduction of the Corrosion Assessment and Prediction Laboratory (CAPLab)

Prof. Dr. Ying Jin
National Center for Materials Service Safety (NCMS), University of Science and Technology Beijing (USTB), China
30
13:50 - 14:10Invited Lecture 1:

Corrosion Mechanisms in Marginal Sour (CO2/H2S) Environment with Correlation of H2S in Aqueous State

Assoc. Prof. IR. Dr. Najmiddin Yaakob
Faculty of Chemical Engineering, Univerity Teknologi, MARA (UiTM), Malaysia		Invited Lecture 2:

Weathering Steel Exposure Test in Thailand: Long-term Corrosion Kinetics and Machine Learning on Bi-electrode Sensor Data

Dr. Wanida Pongsaksawad
National Metal and Materials Technology Center, Thailand		Invited Lecture 3:

Surface Engineering of Mg-8Al-4Ca Non-Flammable Magnesium Alloy: Second Phase Effect on Conversion and MAO Treatments

Prof. Yueh-Lien Lee
Department of Engineering Science and Ocean Engineering, National Taiwan University, Taiwan		Invited Lecture 4:

Hydrogen Effects in Steels and SS Steels and Their Impacts on Service Safety of Hydrogen Pipings and Vessels

Prof. Dr. Wenyue Zheng
National Center for Materials Service Safety (NCMS), University of Science and Technology Beijing (USTB), China
31
14:10 - 14:30Invited Lecture 5:

Influence of High Temperatures and Off-Design Operating Conditions on the Degradation of Grate Blocks in a Refuse-Derived Fuel (RDF) Boiler

Siriwan Ouampan
National Metal and Materials Technology Center, Thailand		Invited Lecture 6:

Galvanized Reinforcing Steel and Sacrificial Anode Cathodic Protection to Prevent Corrosion of Reinforced Concrete Structure

Assoc. Prof. Dr. Pakawat Sancharoen
School of Civil Engineering and Technology, Sirindhorn International Institute of Technology, Thammasat University - Rangsit Campus, Thailand		Invited Lecture 7:

Stainless Steel Selection Tool For Water Application: Pitting Engineering Diagrams

Dr. Tracy Deng
Technical Sales, Growth Regions
Outokumpu Stainless AB, Sweden		Invited Lecture 8:

Corrosion Behavior of Metal Materials in Simulated High-temperature Flue Gas Environment

Prof. Dr. Feifei Huang
National Center for Materials Service Safety (NCMS), University of Science and Technology Beijing (USTB), China
32
14:30 - 14:50A-O-38

The Impact of Sulphate-Reducing Bacteria on Corrosion and Reservoir Souring in Hydrocarbon Systems

Dr. Naruphorn Dararatan
PTT Exploration and Production Public Company Limited		Invited Lecture 9:

New Generation of Sacrificial Anodes for Reinforced Concrete

Hadi Beirami
J.S.T. Services Company Limited, Italy		Invited Lecture 10:

CUPS (Corrosion Under Pipe Support) Total Solutions

Taywin Buasri, D.Eng
Senior Researcher
Innovation Growth Platform

Vittawas Bunjang
Pipeline Integrity Solution / Ultrasonic testing service
GC Maintenance and Engineering Company Limited , Thailand		C-O-30

Corrosion Behaviors of Thermally Sprayed Nickel Alloy Surface Coatings for Use in Maintenance Industry

Dr. Aradchaporn Srichen
Doctor of Philosophy Program in Nanoscience and Nanotechnology, Faculty of Science, Chiang Mai University
33
14:50 - 15:30Networking & Coffee Break
34
RoomSilk 1Silk 2Silk 3Silk 4
35
SessionEnergy Industry IIInfrastructure & Construction IIManufacturing & Process Industries IIITCMA Awards
36
Session ChairDr. Pitichon Klomjit, Chulalongkorn UniversityDr. Woraphan Intaphan, Faculty of Engineering, Burapha University
Assoc. Prof. Dr. Wantanee Buggakupta, Chulalongkorn UniverysityAsst. Prof. Dr. Chaiyasit Banjongprasert, Chiang Mai University
37
15:30 - 15:50Invited Lecture 11:

The Evolution of Pipeline Top of the Line Corrosion Management: Leveraging Volatile Corrosion Inhibitor for Pipeline Longevity

Suchada Punpruk
Senior Engineer, Quality Assurance and Quality Control
PTT Exploration and Production Public Company Ltd., Thailand		Invited Lecture 12:

Innovations in predictive design and assessment of geothermal systems

Dr. Kathleen Purnell
Institute of Corrosion,University of Leeds, United Kingdom		Invited Lecture 13:

Innovative Coating Materials for Corrosion Prevention in Industrial Applications

Dr. Phairat Phiriyawirut
Senior R&D Manager, Central Research and Development, SCG Chemicals Public Company Limited, Thailand		A-O-12

The effect of temperature on corrosion of bismuth-40tin alloys in 3.5 wt.% NaCl solution

Chanin Tangpongkitjaroen
Department of Metallurgical Engineering, Faculty of Engineering, Chulalongkorn University
38
15:50 - 16:10Invited Lecture 14:

Comparison Between Existing Deep-Well Anodes and Distributed Anode Design with Multiple Controllers for Cathodic Protection Upgrade in Petrochemical Plant

Chatchai Wongchalieo
GC Maintenance and Engineering Company Limited, Thailand, Thailand		Invited Lecture 15:

Selecting proper steel grade for
different environmental conditions

Dr. Tracy Deng
Technical Sales, Growth Regions
Outokumpu Stainless AB, Sweden 		C-O-4

Fabrication of Aluminium Foams Using Coated and Uncoated Oyster Shell Foaming Agents

Laksika Usuwan
Department of Metallurgical Engineering, Faculty of Engineering, Chulalongkorn University		B-O-39

A Natural Approach to Preventing Aluminum Corrosion: Role of Clitoria Ternatea (Shankhpushpi) Plant Extract in Acidic Environments

Adarsh Patel
Department of Chemistry, Sir P.T. Sarvajanik College of Science, India
39
16:10 - 16:30Invited Lecture 16:

Crevice Corrosion Behavior of Rail Steel Grade U900A by Corrosion Monitoring Sensor and Coupons at Lampang Environment

Pranpreeya Wangjina
National Metal and Materials Technology Center, Thailand		Invited Lecture 17:

Enhancing Corrosion Protection in Aboveground Storage Tanks with Vapor Phase Corrosion
Inhibitors

Trevor Goss
J.S.T. Services Company Limited, Italy		C-O-6

Investigating the plastic deformation mechanisms of a twinning-induced plasticity steel using advanced transmission electron microscopy

Jesada Punyafu
Materials Science Research Center, Chiang Mai University and Institute for Materials Chemistry and Engineering, Kyushu University, Japan		C-O-8

Advanced Zn-Al-Mg Protective Coating for PV Mounting Structures in Harsh Atmospheric Environments

S. F. Chou
National Taiwan University of Science and Technology and Industrial Technology Research Institute, Taiwan
40
16:30 - 16:50A-O-13

Implementation of High Velocity Thermal Spray for Reliability Improvement of Asset Critical Equipment

Thanit Kenhong
Integrated Global Services		Invited Lecture 18:

Difficulties in Achieving Electrical Isolation for Pipeline Cathodic Protection

Trevor Goss
J.S.T. Services Company Limited, Italy		C-O-16
Comparative study of Frictional Behavior of Cr-doped and Al:Ti-doped DLC coatings on AISI 4140

Nattapol Pintitraratibodee
Metallurgy and Materials Science Research Institute, Chulalongkorn University		C-O-34

Optimizing Recycled Hypereutectic Al-4Fe Alloys for Superior Mechanical and Corrosion Properties through Ultrasonic Melt Processing

Tawatchai Tangsuksan
Department of Industrial Engineering, School of Engineering, King Mongkut’s Institute of Technology Ladkrabang
41
16:50 - 17:10A-O-23

Stabilizing Zinc Anodes in Zinc-Air Batteries Through Optimized Operating Parameters

Ramin Khezri
Metallurgy and Materials Science Research Institute, Chulalongkorn University		Invited Lecture 19:

Advanced Remote Monitoring Solutions: Merging High-Frequency Data Logging with Edge Computing for Enhanced Cathodic Protection Analysis

Ivano Magnifico
J.S.T. Services Company Limited, Italy		C-O-18

Silicon Carbide Effects on the Microstructure and Mechanical Properties of Sintered Diffusion-Bonding Alloyed Fe-Mo-Cu

Patiparn Ninpetch
Department of Industrial Engineering, Faculty of Engineering, Rajamangala University of Technology Thanyaburi		x-x-x

Mechanistic Investigation of the Corrosion Behavior of Oil Casing Steel Governed by Microstructural Features

Wenyue Zhang
National Center for Materials Service Safety (NCMS), University of Science and Technology Beijing (USTB), China
42
17:10 - 17:30A-O-31

Microstructural Characterization and Electrochemical Performance of Fine-Grained Aluminum Anodes Processed by Friction Stir for Aluminum-Air Batteries

Dr. Suphitcha Moonngam
Office of Research Administration and Department of Physics and Materials Science, Chiang Mai University		x-x-x

Innovative Titanium Applications In Chlor-alkali - Balancing Cost And
Durability For Industrial Success

Thanaphon Vansanit
Prolog Titanium Corporation Co., Ltd.		C-O-19

Effects of Pre-Treatment and Leaching Parameters on the Dissolution of Valuable Metals from Cathode Active Materials of Li-ion Batteries

Chatisa Kansomket
Innovative Processing and Recycling of Metals Research Center, School of Metallurgical Engineering, Institute of Engineering, Suranaree University of Technology		x-x-x

Study on The Influence of Surface Microstructure and Chemical Configuration of Ni-Zn-P Coating on Its Hydrogen Permeation Behavior

Yi Qin
National Center for Materials Service Safety (NCMS), University of Science and Technology Beijing (USTB), China
43
18:00 - 20:00Banquet
44
45
DAY IIFriday, 21 November 2025
46
RoomSilk 1 -4
47
Session ChairDr. Ekkarut Viyanit, Thai Corrosion of Metals and Materials Association and National Metal and Materials Technology Center
48
09:00 - 09:30Plenary Lecture 4 (PL-04):
Outlook of Emerging DLC and Diamond Related Coating Materials for Manufacturing Industries
Dr. Da Yung Wang
Aurora Scientific Siam Corporation Ltd., Thailand
49
09:30 - 10:00Plenary Lecture 5 (PL-05):
Corrosion Control and Passivation Quality Evaluation Method for Stainless Steel Rail Vehicles
Dr. SUN Xiaoguang
Aokang Quality Inspection Technology Co., Ltd., China
50
10:00 - 11:30Poster Session, Networking and Coffee Break
51
RoomSilk 1Silk 2Silk 3Silk 4
52
SessionEnergy Industry IIITransportation & Logistics IManufacturing & Process Industries IVPOSCO-Thainox Metallurgy Awards I
53
Session ChairDr. Wanida Pongsaksawad, National Metal and Materials Technology CenterDr. Tongjai Chookajorn, National Metal and Materials Technology CenterAsst. Prof. Dr. Sirichai Leelachao, Chulalongkorn UniversityAsst. Prof. Dr. Nithi Saenarjhan, Chulalongkorn University
54
11:30 - 11:50Invited Lecture 20:

The Nautilus Robotic Solution: A Single Robot that Integrates Inspection, Maintenance, Repair Capabilities for Subsea Pipelines and Tubulars

Phongpat Binsomprasong
Robotics Company Limited, Thailand		Keynote Lecture 5:

Research and Application of Anti-Sand and Rain Erosion Coatings

Dr. GUI Taijiang
Marine Chemical Industry Research Institute Co., Ltd, China		C-O-20

Green Synthesis of Tin Oxide Nanoparticles from Soldering Waste using Orange Peel Extract

Sirunya Somla
Innovative Processing and Recycling of Metals Research Center, School of Metallurgical Engineering, Institute of Engineering, Suranaree University of Technology		C-O-28

Manufacturing Pathways and Peening Synergy: Effects of Initial Surface Quality, Shot Media, and Peening Parameters on MIM and MEX 17-4PH Stainless Steel

Phatthira Thammachob
Department of Physics and Materials Science, Faculty of Science, Chiang Mai University and National Metal and Materials Technology Center
55
11:50 - 12:10Invited Lecture 21:

Next-Generation Boiler Water Management in
Flexible Power Operations

Naphol Klansorn
Electricity Generating Authority of Thailand, Thailand
Invited Lecture 22:

Development and Engineering Application of MXene-based Anti-corrosion/Wear Resin Coating

Prof. FAN Xiaoqiang
Southwest Jiaotong University, China		C-O-21

Development of an Optimized Medium for Bioleaching of Lithium Cobalt Oxide Cathode Powder using Penicillium sp. Strain JMET 24

Thanapon Chandakhiaw
Innovative Processing and Recycling of Metals Research Center, School of Metallurgical Engineering, Institute of Engineering, Suranaree University of Technology		C-O-32

The Influences of Steel Matrix and Composition on The Behavior of Nitrocarburizing White Layer

Suphannika Kaewkantha
Chulalongkorn University
56
12:10 - 12:30 Invited Lecture 23:

Research on Ultrasonic Method for Online Monitoring of Corrosion Status in High-Speed Train C-Type Grooves

Dr. JIN Junjun
Southwest Jiaotong University, China		C-O-22

Surface quality and wear performance of 316L stainless steel fabricated by MIM and MEX: effects of shot peening

Aphichat Sakkaeo
National Metal and Materials Technology Center 		B-O-37

Hybrid Interface Effect of g-C3N4/ZnO Nanocomposites on the Protection of 304 Stainless Steel in Corrosive Aqueous Solution

Htet Yadanar Soe
Special Research Unit for Biomass Conversion Technology for Energy and Environment, Department of Materials Engineering, Faculty of Engineering, Kasetsart University
57
12:30 - 13:30Lunch
58
RoomSilk 1Silk 2Silk 3Silk 4
59
SessionSpecial SessionTransportation & Logistics IIManufacturing & Process Industries VPOSCO-Thainox Metallurgy Awards II
60
Session ChairAsst. Prof. Suvanchai Pongsugitwat, Chulalongkorn UniversityAsst. Prof. Dr. Panyawat Wangyao, Chulalongkorn UniversityAsst. Prof. Dr. Nithi Saenarjhan, Chulalongkorn University
61
13:30 - 13:50Special Session on "I Am สู่ AI : วิศวโลหการในก้าวใหม่แห่งอนาคต — ใครจะขึ้นขบวน หรือตกรถ”

Dr. Chatchai Somsiri
Advisor, MENAM Stainless Wire Public Co., Ltd., Thailand

ศาสตร์ของโลหวิทยาซึ่งมีประวัติยาวนานนับพันปี ได้ผ่านการพัฒนามาอย่างต่อเนื่อง จากการอาศัยแรงงานและการคาดเดา สู่การเป็นวิทยาศาสตร์ จากระบบแอนะล็อก สู่ยุคดิจิทัลและการกำเนิดของคอมพิวเตอร์ที่ทำให้การคำนวณอันซับซ้อนกลายเป็นเรื่องง่ายและในวันนี้ จากระบบ I AM เรากำลังก้าวเข้าสู่ยุคแห่งการพัฒนาที่ขับเคลื่อนด้วย ปัญญาประดิษฐ์ (AI) ซึ่งกำลังสร้างการเปลี่ยนแปลงครั้งใหญ่ทั้งในแวดวงการศึกษาและอุตสาหกรรมการผลิต ผู้ที่สามารถคว้าโอกาสและก้าวทันกระแส AI ได้ จะเป็นผู้ที่ประสบความสำเร็จและสร้างความเหลื่อมล้ำกับผู้ที่ตามไม่ทัน ด้วยความเร็วที่ไม่เคยเกิดขึ้นมาก่อนในประวัติศาสตร์		Invited Lecture 24:

The behavior of hydrogen absorption into high-strength steel sheet under atmospheric corrosion environment

Dr. Shinji Ootsuka
JFE steel corp., Japan		C-O-24

Effect of Heat Treatment on Multi-Material Additive Manufacturing (MMAM) Fabricated by Selective Laser Melting (SLM) via Non-Destructive and Destructive Test

Farhana Mohd Foudzi
Advanced Manufacturing Research Group and Department of Mechanical and Manufacturing Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Malaysia		C-O-25

Behavior of compound layer formation in nitrocarburizing process on gray cast iron standards JIS G5501 FC150

Chairerk Pinukram
Thai Tohken Thermo Co.,Ltd. and Chulalongkorn University
62
13:50 - 14:10Invited Lecture 25:

Thai Railway Innovations: From Research to Real-World Application Supporting the Sustainable Northern Line Project

Dr. Narin Jantaping
Rajamangala University of Technology Lanna, Thailand		C-O-35

Microstructural Evolution and Property Enhancement in ADC12 Aluminum Alloys by Mn and Ce Additions

Anuchit Masthong
Department of Industrial Engineering, School of Engineering, King Mongkut's Institute of Technology Ladkrabang		C-O-26

Influence of Gas Nitrocarburizing and Solution Nitriding on the Microstructure and Mechanical Properties of SUS430 Stainless Steel

Tanabodee Praditja
Thai Tohken Thermo Co.,Ltd. and Chulalongkorn University
63
14:10 - 14:30ล้อมวงสนทนาชาวโลหะ: แบ่งปันประสบการณ์ สู่เส้นทางอาชีพแห่งอนาคต

เสวนาแลกเปลี่ยนมุมมองจากอาจารย์ผู้ทรงคุณวุฒิด้านโลหวิทยา ผู้เชี่ยวชาญจากภาคอุตสาหกรรม และศิษย์เก่าโลหวิทยา ร่วมสำรวจแนวโน้มและโอกาสของสายอาชีพโลหวิทยา แบ่งปันประสบการณ์จริงจากการทำงาน พร้อมแนะแนวทางการเตรียมความพร้อมสู่เส้นทางอาชีพ

ผู้ร่วมเสวนา
1. นายวิกรม วัชระคุปต์ กรรมการบริหาร สภาอุตสาหกรรมแห่งประเทศไทย
2. นายพัฒนศักย์ ฮุ่นตระกูล ประธานกิตติมศักดิ์ กลุ่มอุตสาหกรรมเครื่องจักรกล
การเกษตร สภาอุตสาหกรรมแห่งประเทศไทย
3. นายสุพจน์ สุขพิศาล ประธานกลุ่มอุตสาหกรรมชิ้นส่วนและอะไหล่ยานยนต์ สภาอุตสาหกรรมแห่งประเทศไทย
4. นายธนิต เคนหงส์ Integrated Global Services Inc.

ดำเนินรายการโดย รศ.ดร.ปริทรรศน์ พันธุบรรยงก์ นักวิชาการอิสระ		Invited Lecture 26:

การประยุกต์ใช้ NDT เพื่อช่วยยกระดับการตรวจสอบความปลอดภัยรถโดยสารสาธารณะ

Kanidpong Banditsaowapark
Automotive Engineering Bureau Department of Land Transport, Thailand		x-x-x

Sucker Rods with Enhanced Resistance to Hydrogen Embrittlement

Prof. Dr. Wenyue Zheng
National Center for Materials Service Safety (NCMS), University of Science and Technology Beijing (USTB), China		C-O-27

Adhesion Performance of DLC Coating on SUJ2 Steel Hardened by Atmosphere controlled and Vacuum Controlled Process

Manusavee Taksadej
Thai Tohken Thermo Co., Ltd. and Chulalongkorn University
64
14:30 - 14:50Invited Lecture 27:

Recommendations for New Rail Inspection and Storage

Siam Kaewkumsai
National Metal and Materials Technology Center, Thailand		x-x-x

Dual Effects of Hydrogen Charging on Passive Film Stability and Corrosion Resistance of Ti-6Al-4V Alloy

Dr. Shuhui Chen
National Center for Materials Service Safety (NCMS), University of Science and Technology Beijing (USTB), China		x-x-x

The Effects of Aging on Microstructure and Corrosion Resistance of AISI 201 J1 Stainless Steel

Putthipong Namwol
Faculty of Engineering, Chulalongkorn University
65
14:50 - 15:10
66
15:10 - 15:30Coffee Break
67
RoomSilk 1-2
68
15:30Awarding and Closing Ceremony
69
70
Updated on November 18, 2025
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100