A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Område | Official Document type name | Definition in English | |||||||||||||||||||||||
2 | ||||||||||||||||||||||||||
3 | CE-marking | |||||||||||||||||||||||||
4 | Declaration of performance (DoP) | The Declaration of Performance (DoP) is the key concept in the Construction Products Regulation (CPR). The DoP serves to deliver the information about the essential characteristics of the product that a manufacturer wants to make available on the market. The manufacturer shall draw up a Declaration of Performance when a product covered by a harmonised standard (hEN) or a European Technical Assessment (ETA) is placed on the market. | ||||||||||||||||||||||||
5 | EC Declaration of Conformity | The EC declaration of conformity is the written statement and the a single declaration drawn up by the manufacturer to demonstrate the fulfilment of the EU requirements relating to a product bearing the CE marking he has manufactured. | ||||||||||||||||||||||||
6 | Certificate of constancy of performance | This certificate attests that all provisions concerning the assessment and verification of constancy of performance and the performances described in Annex ZA of a harmonised standard were applied and that the product fulfils all the prescribed requirements. | ||||||||||||||||||||||||
7 | European Technical Assessment (ETA) | The European Technical Assessment (ETA) is a document providing information on the assessment of the performance of a construction product, in relation to its essential characteristics. | ||||||||||||||||||||||||
8 | Certificate of conformity of the factory production control | The documented, permanent and internal control of production in a factory, in accordance with the relevant harmonised technical specifications. | ||||||||||||||||||||||||
9 | ||||||||||||||||||||||||||
10 | National technical requirements | |||||||||||||||||||||||||
11 | National technical approval | a document that declares that a construction product or a specified system is in compliance with specific regulations in a country or area. The document shall be issued by a notified body (see attachement for list of NB`s). | ||||||||||||||||||||||||
12 | Product certification | the process of certifying that a certain product has passed performance tests and quality assurance tests, and meets qualification criteria stipulated in contracts, regulations, or specifications (relevant product standards) | ||||||||||||||||||||||||
13 | ||||||||||||||||||||||||||
14 | HSE | |||||||||||||||||||||||||
15 | Safety Data Sheet | Safety data sheets (SDS) are the main tool for ensuring that suppliers communicate enough information along the supply chain to allow safe use of their substances and mixtures. Safety data sheets include information about the properties of the substance (or mixture), its hazards and instructions for handling, disposal and transport and also first-aid, fire-fighting and exposure control measures. This information can be found in the main body of the safety data sheet or in the annexed exposure scenarios (where applicable). The requirements for the compilation of the safety data sheets are specified in Annex II of REACH. | ||||||||||||||||||||||||
16 | COSHH Assessment | ?? is a document prepared for chemicals which is not included in the requirements for Safety Data Sheets (SDS). It shall be available for welding rods and cord solders (and some more), which describes the health hazard for some polutions created at use. | ||||||||||||||||||||||||
17 | Description of workplace | a general, short description of the key tasks and environmental factors at the workplace. Used related to monitoring personnel on sick leave | ||||||||||||||||||||||||
18 | Instructions for use | information concerning chemicals where protective gear, danger, waste, use of product etc are described with extensive use of symbols | ||||||||||||||||||||||||
19 | Substitution document | document that describes performed review of one or more products that requires SDS/MSDS | ||||||||||||||||||||||||
20 | Fire and security certification | Different systems, mostly contry to contry | ||||||||||||||||||||||||
21 | ||||||||||||||||||||||||||
22 | FM | |||||||||||||||||||||||||
23 | FM documentation | Facility management documentation should include the following: manufacturer information, product/system description, maintenance-, environmental- and waste information | ||||||||||||||||||||||||
24 | Maintenance information | A document describing maintenance information of a construction product, a system or kit. | ||||||||||||||||||||||||
25 | Assembly instructions | describes mounting/installation/application etc. of a product/kit/system | ||||||||||||||||||||||||
26 | User manual | describes how to use a product after installation/assembly etc | ||||||||||||||||||||||||
27 | Operating instructions | instruction for startup and operating a system (larger systems) e.e ventilation systems, boilers etc | ||||||||||||||||||||||||
28 | ||||||||||||||||||||||||||
29 | Enviroment | |||||||||||||||||||||||||
30 | EPD - Environmental Product Declaration | An Environmental Product Declaration, EPD, is a verified document that reports environmental data of products based on life cycle assessment (LCA) and other relevant information and in accordance with the international standard ISO 14025 (Type III Environmental Declarations). | ||||||||||||||||||||||||
31 | Nordic Swan | Svanen (The Swan) is the official Nordic ecolabel, introduced by the Nordic Council of Ministers. | ||||||||||||||||||||||||
32 | EU Ecolabel | The EU Ecolabel helps you identify products and services that have a reduced environmental impact throughout their life cycle, from the extraction of raw material through to production, use and disposal. | ||||||||||||||||||||||||
33 | Der Blaue Engel | The German environmental label | ||||||||||||||||||||||||
34 | EU Energy Label | Energy labels help consumers choosing products which save energy and thus money. The energy efficiency of the appliance is rated in terms of a set of energy efficiency classes from A to G on the label, A being the most energy efficient, G the least efficient. | ||||||||||||||||||||||||
35 | BREEAM NOR A20 | Declaration that state the mentioned products included in the defined product types conform to the minimal requirements of BREEAM-NOR’s A20 list | ||||||||||||||||||||||||
36 | BREEAM NOR Hea 9 | Declaration that state the mentioned products included in the defined product types conform to the minimal requirements of BREEAM-NOR’s article HEA 9 | ||||||||||||||||||||||||
37 | M1 - Emission Classification of Building Materials | The aim of the classification is to enhance the development and use of low-emitting building materials | ||||||||||||||||||||||||
38 | EMICODE EC1 PLUS | The EMICODE® labelling system classifies products into three classes according to their emission behaviour. Only products which satisfy the highest requirements under stringent testing are rated as “very low emission” for inclusion in the top class, EMICODE® EC1PLUS. They carry the EC1PLUS label on their packaging as a visible sign of best possible health protection and high environmental acceptability. | ||||||||||||||||||||||||
39 | ||||||||||||||||||||||||||
40 | Company licens | |||||||||||||||||||||||||
41 | EMAS | The European ECO-Management and Audit Scheme | ||||||||||||||||||||||||
42 | PEFC | PEFC promotes sustainable forest management through forest certification | ||||||||||||||||||||||||
43 | FSC | Promoting the responsible management of forests worldwide | ||||||||||||||||||||||||
44 | ISO 9001 | Quality management systems | ||||||||||||||||||||||||
45 | ISO 14001 | Environmental management systems | ||||||||||||||||||||||||
46 | ISO 9001: ISO 14001 | Quality management systems: Environmental management systems | ||||||||||||||||||||||||
47 | OHSAS 18001 | Occupational health and safety management systems | ||||||||||||||||||||||||
48 | ||||||||||||||||||||||||||
49 | Marketing | |||||||||||||||||||||||||
50 | Product leaflets | Marketing material for the product | ||||||||||||||||||||||||
51 | Product list | A list of products for a supplier | ||||||||||||||||||||||||
52 | Warranty | Warranty proof | ||||||||||||||||||||||||
53 | Price list | Product price list | ||||||||||||||||||||||||
54 | Colour chart | A palette of colour samples | ||||||||||||||||||||||||
55 | Product image | Product image | ||||||||||||||||||||||||
56 | ||||||||||||||||||||||||||
57 | Planning | |||||||||||||||||||||||||
58 | BIM object | A BIM object is detailed information that defines the product and geometry that represents the product’s physical characteristics for use in i BIM model | ||||||||||||||||||||||||
59 | CAD file | 2D and 3D files used for digital design | ||||||||||||||||||||||||
60 | Drawing | 2D drawing for construction illustrations | ||||||||||||||||||||||||
61 | Specifying text | Specifying text for construction works | ||||||||||||||||||||||||
62 | ||||||||||||||||||||||||||
63 | Other | |||||||||||||||||||||||||
64 | Egenerklæring | |||||||||||||||||||||||||
65 | Material information | Information of a products material | ||||||||||||||||||||||||
66 | Annen produktinformasjon | |||||||||||||||||||||||||
67 | Materials recycling | Information about the products materials ability of being recycled | ||||||||||||||||||||||||
68 | Kontrollplan | |||||||||||||||||||||||||
69 | Transporting instructions | Instructions for how to transport the product | ||||||||||||||||||||||||
70 | Wiring diagram | Illustrated instructions for connecting within electrical components | ||||||||||||||||||||||||
71 | Spare parts list | A detailed illustration of all contained components in a product. | ||||||||||||||||||||||||
72 | Produktcertifiering (SWE) | |||||||||||||||||||||||||
73 | Technical datasheet | Contains product properties as height, width, length, density, strength, u-factor etc | ||||||||||||||||||||||||
74 | Table of tolerances | Information for use in dimensioning and tolerancing based on calculations of the physical dimensions and the variation of individual performances of a product / a solution. | ||||||||||||||||||||||||
75 | Fire approval | Fire protection documentation is a technical assessment of the reaction to fire characteristics of a product. The document shall be issued by a national notified body. | ||||||||||||||||||||||||
76 | Product data sheet | A description of the product, containing material and property information. The document can also contain installation instructions, environmental information etc. Not to be mixed with maintenance documentation | ||||||||||||||||||||||||
77 | Sectional drawing | 2D cross-sectional drawing | ||||||||||||||||||||||||
78 | ||||||||||||||||||||||||||
79 | ||||||||||||||||||||||||||
80 | ||||||||||||||||||||||||||
81 | ||||||||||||||||||||||||||
82 | ||||||||||||||||||||||||||
83 | ||||||||||||||||||||||||||
84 | ||||||||||||||||||||||||||
85 | ||||||||||||||||||||||||||
86 | ||||||||||||||||||||||||||
87 | ||||||||||||||||||||||||||
88 | ||||||||||||||||||||||||||
89 | ||||||||||||||||||||||||||
90 | ||||||||||||||||||||||||||
91 | ||||||||||||||||||||||||||
92 | ||||||||||||||||||||||||||
93 | ||||||||||||||||||||||||||
94 | ||||||||||||||||||||||||||
95 | ||||||||||||||||||||||||||
96 | ||||||||||||||||||||||||||
97 | ||||||||||||||||||||||||||
98 | ||||||||||||||||||||||||||
99 | ||||||||||||||||||||||||||
100 |