ABCDEFGHIJKLMNOPQRSTUVWXYZ
1
I have received a lot of requests to edit this document, if you have something useful to add, please send the info in a PM to me on FORScan and I will get it added. I will not be adding anyone due to people vandalizing this.
2
FORScan: MuddledGuy
3
NOTE:This was copied from the 2017 Super Duty Spreadsheet, some of these things may NOT be compatible with the 2017 Focus ST, so please make sure to read Status!!!
4
5
NEW USERS READ FIRST:Detailed installation and setup instructions are on the 'Setup Instructions' tab below. When FORScan is completely installed and setup, review the tutorial document linked in the FORScan Training section BEFORE making any changes. Don't forget to backup your modules first!
6
7
Feature NameModuleKey PositionDefault Value (Ignore if different on your truck)New ValueNotesFTE/FORScan MemberStatus
8
Sync3 Boot Splash ScreenAPIM7D0-02-01xxxx x1xx xxxxxxxx xBxx xxxxB - ST Ford Performance
C - RS Ford Performance
D - GT Ford Performance

1 - Standard Ford logo
4 - Lincoln Presidential
5 - Raptor Ford
6 - Mustang
7 - GT350
9 - GT350
MuddledGuyWorking
9
Remove Sirius from SyncAPIM7D0-01-01*xxx xxxx xxxx8xxx xxxx xxxxRemoves Sirius as a media source in Sync. If * is A change to 8, if 2 change to 0. Change does not take effect immediately. Turn car off, open and shut door, wait 30 seconds and restart.TexmudderWorking
10
NOTE:EVERYTHING BELOW IS FROM THE 2017 SUPERDUTY SPREADSHEET, IT MAY OR MAY NOT WORK, AND I AM NOT RESPONSIBLE FOR ANY DAMAGES CAUSED BY THE FOLLOWING.
11
switch.
12
Double Horn Honk DisableBdyCM as built726-41-02xxx1 xxxx xxxxxxx0 xxxx xxxxThis disables the double honk when walking away from truck with engine running and key fob in pocket. Recommended to implement the Secure Idle (Police Mode) feature to prevent unauthorized driving away without the key fob.switch.
13
Fog Lights with High Beam LED and some HALOGENBdyCM as built726-27-01xxxx xxx1 xxxxxxxx xxx0 xxxxThis allows LED fog lights to stay on when high beams are also turned on. This code has been confirmed to work with some halogen headlght trucks also. Also known as Bambi mode (to see deer better).switch.
14
Fog Lights with High Beam HALOGENBdyCM as built726-27-01x0xx xxxx xxxxx1xx xxxx xxxxThis allows Halogen fog lights to stay on when high beams are also turned on. Also known as Bambi mode (to see deer better).KubotaOrange76
15
Show Temps on GaugesIPC720-07-01xxxx xEA xxxxxxxx x**x xxxxDisplay exact termperatures above the gauge on the center cluster. Replace ** with E5 with brake controller, 65 if no brake controller. A5 adds temps above gauges without adding boost gauge and boost data to menus.
16
Heated and Cooled Seats Icons on Home and Climate ScreensAPIM7D0-01-01xxxx xxxx x4xxxxxx xxxx x*xx1 = Cooled seats option on screen, no heated seats or heated wheel option.
2 = Heated/cooled seats option on screen with no heated wheel option.
3 = Heated seats on screen, no cooled seats and no heated wheel option.
4 = No on screen heated/cooled seats on any screen, heated wheel is in top left.
5 = Unknown
6 = Heated/Cooled seats and heated wheel options on screen.
7 = Heated seats and heated wheel, no cooled seats.
8 = Rear Climate Control panel, no heated/cooled options for front.
AllGoNShow
17
Fog Light Switches Off w/BlinkerBdyCM as built726-28-02xxxx x0xx xxxxxxxx x1xx xxxxConfirmed on LED and halogen headlights/fog lights.
0 (Default Operation - Fog Lights Constant), 1 (Fog Lights Switchback w/Blinker)
AllGoNShow
18
Disable Door Lock Horn HonkBdyCM as built726-38-02xxx1 xxxx xxxxxxx0 xxxx xxxx1 (Enabled - Default), 0 (Disabled)AllGoNShow
19
Secure Idle (Police Mode)BdyCM as built726-42-01x0xx xxxx xxxxx1xx xxxx xxxxPrevents vehicle transmission from shifting out of Park without passive key inside vehicle (Shifter Locked w/No Key Detected message) 0=Disabled 1=EnabledAllGoNShow
20
Remember Fog Lights on StartupBdyCM as built726-27-01xxxx x1xx xxxxxxxx xxx0 xxxxDefault value does not remember either high beam or fog light status on key off/on. Headlight switch in Auto position. Restores previous setting only if lights are needed on next startup.AllGoNShow
21
Remember Fog Lights and High Beams on StartupBdyCM as built726-27-01xxxx x1xx xxxxxxxx xxx0 x1xxDefault value does not remember either high beam or fog light status on key off/on. Headlight switch in Auto position. Restores previous setting only if lights are needed on next startup.AllGoNShow
22
Speedometer Recalibration for Different Tire SizeBCM726-12-01xxxx xx00 xxxxxxxx xx4C xxxxForum comment: "Original tire size 275/70r18, New size 285/75r18. No DTC codes after 900 miles. This is a small change. Larger tire size changes do calibrate the speedometer but a check engine light will persist." The following can be used for a slightly larger calibration (approx 2.5%) without CEL: xxxx-0AAE-xxxxKubotaOrange76
23
Sync 3 Boot Screen AnimationsAPIM7D0-02-01xxxx x1xx xxxxxxxx x7xx xxxxGT350 Boot Screen Animation *Sync 3.0 onlyRebelZ
24
Sync 3 Boot Screen AnimationsAPIM7D0-02-01xxxx x1xx xxxxxxxx x9xx xxxxGT350 Boot Screen Animation *Sync 3.0 onlyRebelZ
25
Sync 3 Boot Screen AnimationsAPIM7D0-02-01xxxx x1xx xxxxxxxx x5xx xxxxRaptor SVT Boot Screen Animation *Sync 3.0 onlyRebelZ
26
Sync 3 Boot Screen AnimationsAPIM7D0-02-01xxxx x1xx xxxxxxxx x6xx xxxxMustang Boot Screen Animation *Sync 3.0 onlyRebelZ
27
Sync 3 Boot Screen AnimationsAPIM7D0-02-01xxxx x1xx xxxxxxxx x4xx xxxxLincoln Presidential Boot Screen Animation *Sync 3.0 onlyRebelZ
28
BCM726-31-02xxxx 07xx xxxxFixes Incorrect Color Choices When Using Lincoln ThemeLivinitup
29
Sync 3 Boot Screen AnimationsAPIM7D0-02-01xxxx x1xx xxxxxxxx x8xx xxxxVignale Boot Screen Animation *Sync 3.0 onlyRebelZ
30
Sync 3 Boot Screen AnimationsAPIM7D0-02-01xxxx x1xx xxxxxxxx x5xx xxxxRaptor Ford Performance Boot Screen Animation *Sync 3.0, Sync 2.2RebelZ
31
Sync 3 Boot Screen AnimationsAPIM7D0-02-01xxxx x1xx xxxxxxxx xCxx xxxxRS Boot Screen Animation *Sync 3.0, Sync 2.2RebelZ
32
Sync 3 Boot Screen AnimationsAPIM7D0-02-01xxxx x1xx xxxxxxxx xBxx xxxxRS Boot Screen Animation *Sync 3.0, Sync 2.2RebelZ
33
Sync 3 Boot Screen AnimationsAPIM7D0-02-01xxxx x1xx xxxxxxxx xDxx xxxxRS Boot Screen Animation *Sync 3.0, Sync 2.2RebelZ
34
Global Window Open/CloseBCM726-17-010000 0000 00450101 0101 014AAllows front windows to open/close with remote button. To open windows, press the unlock button once on fob, then press and hold the unlock button again until front windows begin opening. To close windows, press and hold the lock button for approximately 5 seconds and release when windows begin to close. Window movement can be interrupted at any time by pressing either the lock or unlock buttons.RebelZ
35
BCM726-17-020101 0101 014B0101 0101 014B
36
BCM726-30-010001 0000 005F0101 xxxx xxxx
37
DDM740-05-019A00 E7Dxxx xxxx xxxx
38
PDM741-05-018A00 D8Dxxx xxxx xxxx
39
IPC720-02-013xxx xxxx xxxx7xxx xxxx xxxxAdds new menu item under Advanced Settings/Vehicle/Windows to enable Remote Close. Remote Open or Close can be enabled and disabled using the checkboxes.KYLongRifle
40
Disable Panic Alarm HornBCM726-01-02xxx0 xxxx xxxxxxx1 xxxx xxxxDisables the horn when pressing the panic button on key fob. Lights will still flash.Livnitup
41
Panic Alarm Button Press CountBCM726-37-01xxxx xxx2 xxxxxxxx xxx* xxxxReplace the asterisk with one of the following: 0=Panic alarm button on fob disabled, 1=Panic alarm button on fob requires 2 presses, 2=Panic alarm button on fob requires single press to activate.Livnitup
42
Enable/Disable Spot LightsBCM726-56-01xxxx x1xx xxxxxxxx x0xx xxxx1 for enable, 0 for disableLivnitup
43
Disable Tire Pressure MonitorBCM726-08-01x1xx xxxx xxxxx0xx xxxx xxxx1 for enable, 0 for disableLivnitup
44
Timeouts for Heated Steering WheelHSWM714-01-01*xxx xxxx xxxx*xxx xxxx xxxxHSWM is Heated Steering Wheel Module. Replace the asterisk with one of the following: 1=Timeout disabled, 8=5 mins, 9=10 mins, A=12 mins, B=15 mins, C=18 mins, D=20 mins, E=25 mins, F=30 minsLivnitup
45
Parking lamps on with low beams for DRLBCM726-26-02x0xx xxxx xxxxx1xx xxxx xxxxEnables parking lamps while headlights are on low beam when in DRL (daytime running lights).Livnitup
46
Remove CD Option from SyncAPIM7D0-04-01x1xx xxxx xxxxx0xx xxxx xxxxRemove the CD player from source in the Sync screenLivnitup
47
Courtesy Lamps Ramp DownBCM726-32-02xx** xxxx xxxxCourtesy Lamps ramp down duration (seconds converted to hex)Livnitup
48
Courtesy Lamps Ramp UpBCM726-32-02xxxx xx** xxxxCourtesy Lamps ramp up duration (seconds converted to hex)Livnitup
49
Courtesy Lamps ConfigurationBCM726-31-01xxxx x*xx xxxxCourtesy Lamps Cfg: 0=immediate, 1=Theater DimmingLivnitup
50
Puddle Lights Show TimeBCM726-31-01xxxx xxxx **xxApproach (Puddle) Light Show Max Time (seconds converted to hex). When truck unlocked via fob.Livnitup
51
Change Fuel Tank SizeIPC720-03-01xxx* **xx xxxxxxx* **xx xxxxChange asterisks to one of the following: 4 4A=30 Gal, 5 07=34 Gal, 5 EA=40 Gal, 7 19=48 Gal, 7 65=50 Gal, 8 22=55 Gal (This parameter is programmed to accept 4 digit Liters in this format XXX.x 55gal converts to liters of 208.198L so 208.2L rounded then drop the decimal 2082 decimal to HEX equal 822.)KYLongRifle
52
Driver Seat Belt Chime DisableIPC720-01-01xxxx xx6x xxxxxxxx xx2x xxxxNumber 2 in this position disables the chime on the driver seatjjmcc2
53
Passenger Seat Belt Chime DiableIPC720-01-01xxxx xx4x xxxxNumber 4 in this position disables the chime on the passenger seatjjmcc2
54
Disble all Seat Belt ChimesIPC720-01-01xxxx xx0x xxxxNumber 0 in this position disables the chime on the driver and passenger seats. NOTE: Seat belts can be disabled via instructions in the owners manualjjmcc2
55
Autofold/Unfold Mirrors via Lock/Unlock on FobDDM740-03-01x8xx xxAutofold mirrors via unlock/lock on fob. ** Tow mirrors require swapping pins 18 & 19 on mirror connector. See link: http://www.f150forum.com/f118/tow-mirrors-auto-fold-mod-pictures-365884/. Fxxx works on trucks with 2 key fobs but FCxx is required if using 3 or 4 key fobs.hollapm
56
DDM740-12-01Fxxx or FCxx
57
PDM741-03-01x8xx xx
58
PDM741-12-01Fxxx or FCxx
59
Autofold/Unfold Mirrors (Lincoln Style)DDM740-03-01x84x xxAutofold mirrors - Lincoln Style (doesn't unfold/fold with unlock/lock on fob...requires opening/closing door).
** Tow mirrors require swapping pins 18 & 19 on mirror connector. See link: http://www.f150forum.com/f118/tow-mirrors-auto-fold-mod-pictures-365884/. Fxxx works on trucks with 2 key fobs but FCxx is required if using 3 or 4 key fobs.
hollapm
60
DDM740-12-01Fxxx or FCxx
61
PDM741-03-01x84x xx
62
PDM741-12-01Fxxx or FCxx
63
Sync 3 Theme - Ford GT (Blue)APIM7D0-01-020xxx xxxx xxxxChanges the Sync 3 screens to a GT theme. Splash screen will change to GT.Livinitup
64
7D0-02-01xxxx xDxx xxxx
65
7D0-03-01xxxx x4xx xxxx
66
Increase radio on time after truck shut downAPIM7D0-01-01xx2x xxxx xxxxxx6x xxxx xxxxThis changes the radio power-off delay to 60 minutes after the truck is shut off. Wait for the ingition power to time out and then turn the radio back on with the RADIO power button. Alternatively, after turning off the ignition, open and close any door to disable accessory power. Then press the radio power button to turn radio back on. It will now stay on for the extended time amount.Livinitup
67
Add DPF Filter % to screenIPC720-07-02x7xx xxxxxFxx xxxxThis adds the DPF % screen to the Truck Information screen. Some trucks will report a camera error after making this modification. To avoid that, make your update according to the following: If your original default value is 0, change to 8; if 1, change to 9; if 2 then A; if 3 then B; if 4 then C; if 5 then D; if 6 then E, if 7 then F (as shown).screwy
68
Power Point Timeout DisableBCM726-39-01xxxx x1xx xxxxxxxx x0xx xxxxTurns off the timeout on the power points in the truck. Battery Monitoring System (BMS) will override unless disabled. This feature has had multiple confirmations but also failed on other trucks. Differences are unknown.Livinitup
69
Power Point Timeout 4 HoursBCM726-39-01xxxx x1xx xxxx**** xxxx xxxxReplace the **** with 3870. Allows power points to remain powered for 4 hours after the vehicle is shut down. After four hours the power points will timeout and stop supplying voltage to plugged in devices. This feature has had multiple confirmations but also failed on other trucks. Differences are unknown.manowell
70
Battery Monitoring System (BMS) DisableBCM726-04-01xxx1 xxxx xxxxxxx0 xxxx xxxxDisables battery protection system. Electrical systems will remain on and vehicle batteries can drain completely. THIS MAY NOT WORK. The default value is already 0, not 1 as shown. Waiting additional updates.Livinitup
71
Daytime Running Lights (DRL)BCM726-45-01xxxx 7Fxx xxxxAllow DRL choices below:DanMc85 & Livinitup
72
726-50-01XXxxReplace XX with the two digit value of the desired lights to illuminate in DRL mode.
01 = DRL Master Disable
02 = Low Beams
04 = Front Fog Lamps
08 = Front Turn Lamps
10 = Dedicated DRL Lights (LED Light Bars/Strips) - Enables BCM DRL Outputs
20 = High Beams
40 = Low Beams and Dedicated DRL Lights
Hex addition of all the choices above: 10+01+02+04+08+20+40=7F

Example 1: A truck with LEDs would have an as-built value of 726-45-01 xxxx 11xx xxxx which would only allow values at 726-50-01 of Dedicated DRL Lights (10) or DRL disabled (01) = (Hex addition of 10 + 01 = 11)

Example 2: A truck with Halogens would have an as-built value of 726-45-01 xxxx 03xx xxxx which would only allow values at 726-50-01 of DRL disabled (01) or DRL low beams (02) = (Hex addition of 01 + 02 = 03)
73
Outer Halo Lights as DRLsBCM726-26-02x1xx xxxx xxxxOuter halo lights as DRLs (no low beam, no turn signals). Confirmed on F150s but waiting confirmation on SDsLivinitup
74
726-50-01017F
75
Halogen to LED Headlight ConversionBCM726-26-02xxxx xxx1 xxxxxxxx xxx0 xxxxFrequency select configuration: 0 = default for OEM LED; 1 = default for OEM Halogen. Excellent tutorial that goes beyond the instructions provided here: https://www.ford-trucks.com/forums/1517743-complete-how-to-halogen-to-led-heads-and-tails.html (thanks to jmeo for the contribution)Livinitup & jmeo
76
Halogen to LED Rear Turn Signal ConversionBCM726-27-02xxxx xxxx x*xxRear bulb turn outage config: 1=outage, 0=no outage
77
DESCRIPTION PENDINGBCM726-28-01x*xx xxxx xxxxRear LED turn outage cfg: 1=outage 0=no outage
78
Bluetooth Pairing NameAPIM7D0-04-01xxxx xxxx **xxThis changes the device name of the truck when pairing bluetooth devices. Change the asteriscs with: 2D=Raptor, 0E=F150, 0F=F250, 10=F350, 19=MKZ, 02=Focus, 03=Fusion, 04=C-Max, 06=Mustang, 08=Escape, 09=Edge, 24=Mondeo, 0B=Explorer, 20=Fiesta, 1B=MKC, 2E=Continental, 1C=MKX, 1E=Navigator, 0C=Expedition. ** The above only works in Sync 3 ver 2.0+ and if you wish to change it you must remove paired phone from Sync 3 & paired name from phone and re-pair.Livinitup
79
Average Speed DisplayIPC720-01-012F0F 1064 724Dxxxx x4xx xxxxAdds "Average Speed" menu item to the Trip/Fuel menu.Livinitup
80
Massage SeatsSCMG/SCMHMultipleSee linkLink to F150 Spreadsheet for all valuesLivinitup
81
Turn Signal Flash CountSCCM724-01-01xxxx x6xx xxxxxx x*xx xxReplace * with one of the following:
0=1 Flash OUC False 1=1 Flash OUC True
2=1 Flash OUC False 3=1 Flash OUC True
4=2 Flashes OUC False 5=2 Flashes OUC True
6=3 Flashes OUC False 7=3 Flashes OUC True
8=4 Flashes OUC False 9=4 Flashes OUC True
A=5 Flashes OUC False B=5 Flashes OUC True
C=6 Flashes OUC False D=6 Flashes OUC True
E=7 Flashes OUC False F=7 Flashes OUC True
On Until Cancelled (OUC) means manually moving the turn signal arm in opposite direction or manually cancelling the turn signal. Two flashes are added automatically when trailer is attached.
Livinitup
82
Switch Steering Wheel ButtonsSCCM724-01-01xxxx 0xxx xxxxxx 8xxx xxIf you like your stereo buttons on the left instead of the right this value will swap button functions from right bank to left bank. Note: This is only for the Up,Down,Right,Left/Center buttons. Not the lower set for cruise control, voice commands, etc. Cluster Crossover Cfg: 0=disable, 8=enableLivinitup
83
Ambient LED Lighting (Door Ajar)BCM726-31-01x*xx xxxx xxReplace * with one of the following: 0=Ice Blue (Ford), 1=Orange (Ford), 2=Soft Blue (Ford), 3=Red (Ford), 4=Green (Ford), 5=Blue (Ford), 5=Purple (Ford), 7=White (Lincoln), 8=Amber (Lincoln), 9=Teal (Lincoln), A=Red (Lincoln), B=Blue (Lincoln), C=Green (Lincoln), D=Lilac (Lincoln), E=Unknown, F=Unknown. Note: Sync 3: Use Lincoln Splash Screen Brand (7D0-01-02 8xxx xxxx xx--), on your APIM so that on screen color selections will match BCM if you use a color greater than or equal to 7 .flsdiver
84
Ambient LED Lighting (Entry)BCM726-31-02xxxx x*xx xxReplace * with one of the following: 0=Ice Blue (Ford), 1=Orange (Ford), 2=Soft Blue (Ford), 3=Red (Ford), 4=Green (Ford), 5=Blue (Ford), 6=Purple (Ford), 7=White (Lincoln), 8=Amber (Lincoln), 9=Teal (Lincoln), A=Red (Lincoln), B=Blue (Lincoln), C=Green (Lincoln), D=Lilac (Lincoln), E=Unknown, F=Unknown. Note: Sync 3: Use Lincoln Splash Screen Brand (7D0-01-02 8xxx xxxx xx--), on your APIM so that on screen color selections will match BCM if you use a color greater than or equal to 7 .flsdiver
85
Add Hill Descent ControlABS760-03-01x1xx xxx3xx xxThis feature requires addition of an activation button on the dash. Replace the hazard button with a dual function hazard and HDC enable button part #: HC3Z-13D730-CA. For more information see the following thread: https://www.ford-trucks.com/forums/1503198-forscan-adding-hill-descent-control-to-non-fx4-4x4.htmlMooch91
86
Add TPMS "Specified" to displayIPC720-04-01xx*x xxxx xxxxReplace * with one of the following:
0=TBC Gain disabled & TPMS Specified value disabled
4=TBC Gain enabled & TPMS Specified value disabled
8=TBC Gain disabled & TPMS Specified value enabled
C=TBC Gain enabled & TPMS Specified value enabled
Livinitup
87
Disable Traction ControlIPC720-01-01xx2x xxxx xxxxAdvanceTrac DisabledLivinitup
88
Enter NAV Destination and viewing texts while vehicle is in motionAPIM7D0-02-015753 xxxx xxxxEnables entering NAV destination and viewing texts while vehicle is in motion. Sync version must be upgraded to version 2.2 or higher. Insrtuction for upgrading Sync begin on post 2044 Page 52 of the FORScan spreadsheet. https://www.ford-trucks.com/forums/1460787-forscan-spreadsheet-52.html. Ahem, do we need to say it? This feature should be used by the passenger and the driver should keep their eyes on the road. Be smart and be safe. This feature disables automatic 911 calling if in an accident. Livinitup
89
Disable Door Chime when Door AjariPC720-01-02xx1x xxxx xxxxxx0x xxxx xxxxDisables door chime when door open and ignition on.neonovulator
90
Disable Key In Ignition ChimeiPC720-02-01xx*x xxxx xxxxThis disables chime when key is in the iginition and ignition is off. Subtract 8 from the value in the * position. For example, if C then change to 4. This feature is dependent upon the Disable Door Chime when Door Ajar feature. That must be enabled first for this to work.neonovulator
91
Disable Illuminated Entry/Exit - Dark Car ModeBCM726-32-01xxxx x1xx xxxxTurns off parking and cargo lights when door is opened. R1xterGonz0
92
BCM726-58-02xxxx xxxx x1xxSilent mode. Waiting for better description
93
Remote Start Enable/DisableBCM726-22-02xxx* xxxx xxxxSubstitute * with one of the following: 0=disabled, 1=enabledLivinitup
94
Add Climate Screen for XL/XLTAPIM7D0-01-01xxxx xxx3 xxxxAdds climate screen to Sync v3 and above XL and XLT trims. Note: Fan speed control does not work, remains on the analog dial, Does not add dual climate capabilities, Temp control does not work, remains on the analog dial. What does work- On/Off, AC & Recirculate On/Off, Vent Control - foot, dash, windshield, Some voice commandsUzumati
95
APIM7D0-01-02xxxx x2xx xxxx
96
Ambient Light Sensor SpeedBCM726-26-01xxx* xxxx xxxx0=15 seconds delay turning on headlamps when dark, 1=2 seconds delay turning on headlamps when darkLivinitup
97
Speedometer Calibration for 37 inch TiresBCM726-12-010163 0ACC xxxxThis update will correct the speedometer to read accurately for the larger tire size. It will however, also set a check engine light (CEL) because of the difference from factory settings. There appears to be no other negative effects other than the CEL.KubotaOrange76
98
Enable Auto-Regen CheckboxIPC720-07-02xxxx xxx4 xxxxxxxx xxxC xxxxDefault is checkbox selected. Disabling will cause regen message to prompt user to perform regen. Additional description pending further user experience.screwy
99
100