RailCore II 300ZLT BOM
 Share
The version of the browser you are using is no longer supported. Please upgrade to a supported browser.Dismiss

View only
 
ABCDEFGHIJKLMNOPQRSTUVWXYZAAAB
1
Item NamePriceQtyTotalLinkNotes
2
Items in Yellow are different than the 300ZL
3
FRAME COMPONENTS
4
HDPE Side Panels$1751$175.00
https://www.projectr3d.com/products/side-panel-set
DXF's available from the Fusion 360 CAD Design: http://a360.co/2D5OryV
5
15x15x745 (Misumi HFS3-1515-745 )3$0.00https://us.misumi-ec.com/Misumi pre-cut (For the Z tower Extrusions)
6
15x15x425 (Misumi HFS3-1515-425 )$2.214$8.84https://us.misumi-ec.com/Misumi pre-cut (Horizontal Y)
7
15x15x715 (Misumi HFS3-1515-715 )4$0.00https://us.misumi-ec.com/Misumi pre-cut (Corner Uprights)
8
15x15x460 (Misumi HFS3-1515-460 )$2.394$9.56https://us.misumi-ec.com/Misumi pre-cut (Horizontal X)
9
15x15 Corners (8)$16.251$16.25http://a.co/0MakkPQ4 Spare corners after ordering$209.65
10
11
MOTION COMPONENTS
12
750mm TR8*2 leadscrew (700 will work as well)
$22.953$68.85
http://www.zyltech.com/8mm-t8x2-lead-screw-trapezoidal-acme-w-small-delrin-anti-backlash-nut-kit-custom-length-up-to-1000mm/
Specify 750 or 700mm, includes the correct delrin anti-backlash nut
13
700mm MGN12H + carriage3$0.00MGN 12H-L700MM
14
400mm MGN12H + carriage$29.993$89.97https://amzn.to/2CFqIdY
MGN 12H-L400MM old link: http://www.ebay.com/itm/MGN12H-Linear-Sliding-Guide-Block-250-300-350-400-450-500-550mm-CNC-3D-Printer-/152236837331
15
16 tooth 5mm bore GT2 Pulley$3.992$7.98
https://www.smw3d.com/gt-pulleys-gt2-and-gt3/
For X/Y/Z steppers (Only 2 needed for the ZL Build)
16
Gt2 smooth idlers (2) 5mm ID$7.991$7.99http://a.co/bDcYV7M1 packs of 5; 2 spares
17
Gt2 20 tooth idlers (6) 5mm ID$8.992$17.98http://a.co/2oeGToLfor corexy motion gear. 2 packs of 5, 3 spares
18
5mm I.D. x 6mm O.D. x 0.40mm Shim$13.241$13.24http://a.co/fElunfLFor shimming the bearings - not required, but recommended
19
GT2 Belt (5m)$9.171$9.17http://a.co/d/3cVlE5mX/Y Motion belts
20
608ZZ Bearing3
21
5mm to 8mm Coupling$4.953$14.85
http://www.zyltech.com/flexible-plum-coupler-shaft-various-combinations-from-5mm-to-12-7mm/
Specify 5mm/8mm
22
23
HARDWARE
24
Threaded Inserts M3 x 0.5$7.461$7.46http://a.co/aEc8L87Brass inserts, tons of spares
25
Threaded Inserts M5 x 0.8$8.751$8.75http://a.co/5UQBOSYBrass inserts, tons of spares
26
M3 x 6mm button head bolts$0.0530$1.50
http://www.boltdepot.com:80/AddToCart.aspx?qty7218=30
May be needed for thinner rails. Includes spares
27
M3 x 8mm Button Head Bolts (100)$3.101$3.10
http://www.boltdepot.com:80/AddToCart.aspx?qty7219=100
For the corner cubes, and for mounting the steppers (bag of 100, includes spares)
28
M3 x 10mm button head bolts (100)$3.251$3.25
http://www.boltdepot.com:80/AddToCart.aspx?qty7220=100
For attaching motor mounts to the frame (need 56, cheaper by the bag)
29
M3 x 12mm button head bolts$0.0720$1.40
http://www.boltdepot.com:80/AddToCart.aspx?qty7221=10
For securing the Y rail (2) + extras (they're handy to have a few around)
30
M3 x 16mm button head bolts$0.0832$2.56
http://www.boltdepot.com:80/AddToCart.aspx?qty7222=18
For attaching the leadscrews, securing the Y rail
31
M3 x 20mm button head bolts$0.0812$0.96
http://www.boltdepot.com:80/AddToCart.aspx?qty7223=4
For attaching your controller and the bed to the yokes
32
M3 x 30 button head bolts$0.124$0.48
http://www.boltdepot.com:80/AddToCart.aspx?qty15292=4
For attaching the hotend
33
M3 x 10mm Hex head Bolts (120)$6.781$6.78
http://www.boltdepot.com:80/AddToCart.aspx?qty11100=120
For bolting the sides & bottom to the rails (Need 108, plus spares)
34
M3 x 16mm hex bolts (100)$7.701$7.70
http://www.boltdepot.com:80/AddToCart.aspx?qty11102=100
For attaching the z-axis (can order 54, 46 spares for $1 more)
35
3mm x 45mm socket cap bolts$0.184$0.72
http://www.boltdepot.com:80/AddToCart.aspx?qty6388=4
For the belt retainer clips
36
3mm x 50mm socket cap bolts$0.2512$3.00
http://www.boltdepot.com:80/AddToCart.aspx?qty6389=12
For the Z axis bearing Blocks
37
3mm x 0.5 nuts (100)$1.802$3.60
http://www.boltdepot.com:80/AddToCart.aspx?qty4773=200
For bolting the rails to the frame, motor mounts to the frame (cheaper to order 100 and have spares)
38
3mm lock nuts (100)$3.192$6.38
http://www.boltdepot.com:80/AddToCart.aspx?qty4792=200
For bolting the sides & bottom to the rails (cheaper to order by boxes of 100)
39
M3 washers (100)$1.101$1.10
http://www.boltdepot.com:80/AddToCart.aspx?qty4513=100
Buy lots of washers, they're cheaper in boxes of 100
40
M3 Fender washers0.059$0.45
http://www.boltdepot.com:80/AddToCart.aspx?qty7319=9
For the bed & PSU
41
M4 x 12mm Button Head Bolts$0.094$0.36
http://www.boltdepot.com:80/AddToCart.aspx?qty6624=4
For mounting the PSU
42
M4 Washers$0.054$0.20
http://www.boltdepot.com:80/AddToCart.aspx?qty4774=4
For mounting the PSU
43
M4 Nuts$0.054$0.20
http://www.boltdepot.com:80/AddToCart.aspx?qty4514=9
For mounting the PSU
44
M5x50mm Cap Head Screws$0.407$2.80
http://www.boltdepot.com:80/AddToCart.aspx?qty6453=7
Be sure to order the socket cap head, these are partially threaded for the idlers
45
M5 steel nylock nuts$0.078$0.56
http://www.boltdepot.com:80/AddToCart.aspx?qty4794=8
For the M5 bolts on the idlers - be sure to get nylon lock nuts
46
M5 washers$0.0517$0.85
http://www.boltdepot.com:80/AddToCart.aspx?qty4515=17
For between the idlers
47
M2 x 12mm bolts$0.136$0.78
http://www.boltdepot.com:80/AddToCart.aspx?qty6366=6
For the endstop switches & mini IR probe
48
M2 Nuts$0.056$0.30
http://www.boltdepot.com:80/AddToCart.aspx?qty7362=6
For the endstop switches & mini IR probe$65.24
49
50
51
ELECTRONICS
52
24v PSU 350w PSU (needs to be 200w or greater with AC bed)
$29.901$29.90
https://www.arrow.com/en/products/lrs-350-24/mean-well-enterprises
Any 24v PSU > 200W works with the AC bed.
53
Power Switch$14.051$14.05http://a.co/29Jcr7O10A 250v Power switch and socket, order a fuse to match.
Alternate Source: http://a.co/d/0WK2y7E
54
0.9 degree NEMA 17$23.955$119.75http://a.co/5qBDalvXYZ steppers (A decent torque 1.8 can be substitued for the Z)
55
Mini IR probe$24.991$24.99
https://www.filastruder.com/collections/electronics/products/mini-differential-ir-height-sensor
Z-Probe, BLTouch or Piezo is also an option
56
50mm Layer fan$7.371$7.37http://a.co/0J0F8JC
Alternative fan, better quality: https://www.mouser.com/ProductDetail/Delta-Electronics/BFB0524HH?qs=%2FW4LtXOBxKsCMjEwJ8%252b7sw%3D%3D
57
Bed heater 300mm x 300mm AC silicone pad
$69.991$69.99http://a.co/dpwW5OR
58
SSR$20.731$20.73
https://www.digikey.com/product-detail/en/panasonic-electric-works/AQA211VL/255-2977-ND/2364682
Altnernate Crydom SSR: https://www.digikey.com/product-detail/en/crydom-co/CSW2410/CC1972-ND/751919
59
Extruder Stepper$14.251$14.25
https://www.omc-stepperonline.com/hybrid-stepper-motor/nema-17-bipolar-09deg-36ncm-51ozin-09a-54v-42x42x40mm-4-wires-17hm15-0904s.html?mfp=17-step-angle%5B0.9%5D%2C16-bipolar-unipolar%5BBipolar%5D
E3D alternative: https://www.filastruder.com/collections/electronics/products/nema17-stepper-motor
60
Duet Wifi$169.991$169.99
https://www.filastruder.com/collections/electronics/products/duet-wifi
Can substitute your controller of choice, 32bit recommended with 0.9 steppers
61
Duex5$104.991$104.99
https://www.filastruder.com/collections/electronics/products/duex2-and-duex-5-expansion-board?variant=33002158927
Can use a Duex2, but recommend a Duex5 for greater flexibility down the road
62
Bed Thermistor$0.991$0.99https://www.smw3d.com/thermistors/Select 100K 3950 with lead thermistor
63
Endstop switches$7.201$7.20
https://www.mouser.com/ProductDetail/Omron-Electronics/D2F-01F?qs=0w99tykdtPLhoVh2lktm%252bQ%3D%3D
four pack of tiny microswitches, two spares (Qty 4 OMRON D2F-01F Micro Switch Microswitch SPDT Subminiature)
64
40mm Electronics Enclosure Fans2$0.00
Optional, any 24v, 40mm fan is fine. I haven't installed one yet and have not had heat issues
65
4 conductor wire, 20m$10.961$10.96http://a.co/3uG1OMjAny 22 gauge wire is fine if you have some already$565.26
66
67
HOTEND, BED, ETC
68
E3D V6 (24V)$69.991$69.99
https://www.filastruder.com/products/all-metal-e3d-v6-hotend?variant=1236046388
Be sure to order the 24v version, universal with bowden
69
Extruder Option 1 - E3D Titan$64.991$64.99
https://www.filastruder.com/collections/titanextruder/products/e3d-titan-extruder
Order the "Standard" versionChoose one extruder -
70
Extruder Option 2 - Bondtech BMG$80.001
https://www.filastruder.com/collections/bondtech/products/bondtech-bmg-extruder
Order the "Standard" version
The BMG requires the BMG mount, not the titan mount.
71
E3D Bowden Coupler$7.991$7.99
https://www.filastruder.com/collections/e3d-spare-parts-and-accessories/products/bowden-couplings-all-types?variant=21286000324
Be sure to select "1.75mm" and "Groovemount"
72
LokBuild 12x12 Print surface$25.001$25.00http://a.co/5QvJMjYThis is optional, any print surface in a 250mm^2 or 10x10 works. Printinz, PEI, boro etc.
73
300mmx 300mm Aluminum Bed for ZL$601$60713maker.comDXF's can be pulled out of the Fusion 360 Model
74
1/4 Flat washers$5.401$5.40http://a.co/8bvwfwlFor between the yoke & the bed$233.37
75
76
Total$1,333.45
77
78
79
Optional Components - For the 300ZLT these are *strongly* recommended
80
PanelDue (5" with pre-made cable)$94.991$94.99
https://www.filastruder.com/collections/electronics/products/paneldue?variant=35407854479
Optional, but recommended
81
Aluminum Idler Carriers$201$20.00713maker.com
82
Aluminum X/Y Stepper Mounts$201$20.00713maker.com
83
Aluminum X carriages$401$40
http://www.mandalaroseworks.com/product/railcore
84
Aluminum Z-Yokes$75.001$75.00
http://www.mandalaroseworks.com/product/railcore
85
5mm shoulder bolt, 10mm shoulder$1.992$3.98
https://www.filastruder.com/products/shoulder-screws-bolts?variant=16712533835847
Required for the aluminum Idler mounts (if using the e3d idlers get 12mm)
86
5mm shoulder bolt, 20mm shoulder$1.994$7.96
https://www.filastruder.com/products/shoulder-screws-bolts?variant=16712533868615
2 Required for the aluminum Idler mounts, 2 required for the aluminum X carriages (if using the e3d idlers get 25mm)
87
88
Optional - Wire wrap sleeve
89
1/8" split loom sleeve
http://a.co/d/clnRLe0
90
1/2" split loom sleeve
http://a.co/d/2alpc3l
91
1/4" split loom sleeve
http://a.co/d/ahTHse2
92
93
94
95
96
97
98
99
100
Loading...